AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

200-3366 PUMP GP-MAIN HYDRAULIC S/N MAC1-UP; PAC1-UP PART OF 162-6176 PUMP & MTG GP-MAIN HYDRAULIC 320C


HYDRAULIC SYSTEM
PUMP GP
FILTER GP
SWIVEL GP
TANK GP
VALVE GP-CONTROL

EXCAVATOR 320C EXCAVATOR MAC
 320C U & 320C LU Excavators MAC00001-UP (MACHINE) POWERED BY 3066 Engine SEBP3601 320C MAC   (2001)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-GEAR
349-4087 PUMP GP-GEAR
PUMP GP-GEAR
448-3702 PUMP GP-GEAR
PUMP GP-MAIN HYDRAULIC
200-3366 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
244-8483 PUMP GP-MAIN HYDRAULIC
 

#SEBP36010490
 

200-3366: PUMP GP-MAIN HYDRAULIC

200-3366 PUMP GP-MAIN HYDRAULIC
S/N MAC1-UP; PAC1-UP
PART OF 162-6176 PUMP & MTG GP-MAIN HYDRAULIC
i01550446 SEBP3601
2003366 PUMP GP-MAIN HYDRAULIC Parts scheme 2003366 PUMP GP-MAIN HYDRAULIC Parts scheme 2003366 PUMP GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-2683 Y [1] ACTUATOR GP-PUMP (DRIVE)  
2. 177-2470 [1] COVER  
3. 7X-2557 M [1] BOLT (M16X2X140-MM)  
4. 177-2471 [1] COVER  
5. 204-2684 Y [1] ACTUATOR GP-PUMP (DRIVEN)  
6. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
7. 8T-4140 M [4] BOLT (M16X2X60-MM)  
8. 094-1882 [16] PLUG  
9. 200-3333 [1] HEAD-PUMP  
10. 129-7979 [4] DOWEL  
11. 9S-4185 [2] PLUG (3/4-16-THD)  
12. 3K-0360 [2] SEAL-O-RING  
13. 8T-4136 M [18] BOLT (M10X1.5X25-MM)  
14. 247-8782 [1] BODY  
15. 150-5782 [2] COVER  
16. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
17. 129-7863 [1] COVER  
18. 129-7857 [1] GASKET  
19. 179-9763 [1] FLANGE  
20. 189-9763 [8] SEAL-O-RING  
21. 095-0946 [2] RING-RETAINING  
22. 129-7921 [2] RING-RETAINING  
23. 192-0573 [4] PIN-DOWEL  
24. 191-5709 [2] PISTON AS  
25. 173-3498 [1] BARREL AS  
26. 177-8740 [1] SEAL-O-RING  
27. 190-4896 [2] PLUG  
28. 247-8920 [2] ORIFICE  
29. 200-3334 [1] COVER  
30. 8T-3338 [2] SEAL-O-RING  
31. 129-7859 [2] SET-BEARING  
32. 118-4057 [18] SPRING  
33. 7Y-4215 [2] SPACER  
34. 173-3427 [2] GUIDE-BALL  
35. 173-3473 [2] PLATE  
36. 194-8397 [2] SWASHPLATE AS  
  150-5785 [1] DOWEL  
  173-3428 [1] BUSHING  
  192-0573 [2] PIN-DOWEL  
37. 177-2583 [4] BEARING  
38. 129-7927 [2] BEARING  
39. 129-7855 [1] GASKET  
40. 200-3368 [1] SHAFT  
41. 7M-8485 [2] SEAL-O-RING  
42. 8J-4645 [2] PLUG (STRAIGHT THREAD O-RING)  
43. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
44. 4I-1022 [2] ORIFICE  
45. 094-1875 [6] DOWEL  
46. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
47. 126-2016 J [1] PUMP GP-GEAR (PILOT)  
  9T-0835 [1] RING-RETAINING  
48. 173-3496 [1] BARREL AS  
49. 8T-4192 M [10] BOLT (M12X1.75X25-MM)  
50. 129-7854 [1] CASE  
51. 173-3391 [1] SHAFT-DRIVE  
52. 129-7925 [1] SEAL-LIP TYPE  
53. 096-3983 [1] RING-RETAINING  
54. 096-3944 [1] SEAL-O-RING  
57. 8T-4175 M [2] BOLT (M16X2X90-MM)  
58. 193-1736 [4] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  250-2503 J [1] KIT-SEAL (PILOT GEAR PUMP)  
    (INCLUDES 2 GASKETS, 2 SEALS & RETAINING RING)
  J   KIT MARKED J AVAILABLE FOR PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010491
 

244-8483: PUMP GP-MAIN HYDRAULIC

244-8483 PUMP GP-MAIN HYDRAULIC
S/N MAC1-UP; PAC1-UP
PART OF 162-6176 PUMP & MTG GP-MAIN HYDRAULIC
i02235769 SEBP3601
2448483 PUMP GP-MAIN HYDRAULIC Parts scheme 2448483 PUMP GP-MAIN HYDRAULIC Parts scheme 2448483 PUMP GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1022 [2] ORIFICE  
2. 7Y-4215 [2] SPACER  
3. 096-3983 [1] RING-RETAINING  
4. 118-4057 [18] SPRING  
5. 126-2016 J [1] PUMP GP-GEAR (PILOT)  
5A. 9T-0835 [1] RING-RETAINING  
6. 129-7854 [1] CASE  
7. 129-7855 [1] GASKET  
8. 129-7857 [1] GASKET  
9. 129-7859 [2] SET-BEARING  
10. 129-7863 [1] COVER  
11. 129-7921 [2] RING-RETAINING  
12. 129-7925 [1] SEAL-LIP TYPE  
13. 129-7927 [2] BEARING  
14. 129-7979 [4] DOWEL  
15. 150-5782 [2] COVER  
16. 173-3391 [1] SHAFT-DRIVE  
17. 173-3427 [2] GUIDE-BALL  
18. 173-3473 [2] PLATE  
19. 173-3496 [1] BARREL AS  
20. 173-3498 [1] BARREL AS  
21. 177-2470 [1] COVER  
22. 177-2471 [1] COVER  
23. 273-8314 [1] SEAL-O-RING  
24. 179-9763 [1] FLANGE  
25. 191-5709 [2] PISTON AS  
26. 192-0573 [4] PIN-DOWEL  
27. 200-3333 [1] HEAD-PUMP  
28. 200-3334 [1] COVER  
29. 200-3368 [1] SHAFT  
30. 204-2683 Y [1] ACTUATOR GP-PUMP (DRIVE)  
31. 204-2684 Y [1] ACTUATOR GP-PUMP (DRIVEN)  
32. 242-6801 [2] SWASHPLATE AS  
    (EACH INCLUDES)
32A. 094-1875 [1] DOWEL  
32B. 173-3428 [1] BUSHING  
32C. 242-6803 [2] PIN-DOWEL  
33. 242-6804 [4] BEARING  
34. 9S-4185 [2] PLUG (3/4-16-THD)  
35. 247-8782 [1] BODY  
36. 247-8920 [2] ORIFICE  
37. 094-1875 [6] DOWEL  
38. 094-1882 [16] PLUG  
39. 095-0946 [2] RING-RETAINING  
40. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
41. 096-3944 [1] SEAL-O-RING  
42. 189-9763 [8] SEAL-O-RING  
43. 190-4896 [2] PLUG  
44. 193-1736 [4] SEAL-O-RING  
45. 3K-0360 [2] SEAL-O-RING  
46. 7M-8485 [2] SEAL-O-RING  
47. 7X-2557 M [1] BOLT (M16X2X140-MM)  
48. 8J-4645 [2] PLUG (STRAIGHT THREAD O-RING)  
49. 273-8315 [2] SEAL-O-RING  
50. 8T-4136 M [18] BOLT (M10X1.5X25-MM)  
51. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
52. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
53. 8T-4140 M [4] BOLT (M16X2X60-MM)  
54. 8T-4175 M [2] BOLT (M16X2X90-MM)  
55. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
56. 8T-4192 M [10] BOLT (M12X1.75X25-MM)  
   
    AVAILABLE REPAIR KIT(S):
  250-2503 J [1] KIT-SEAL (PILOT GEAR PUMP)  
    (INCLUDES 2 GASKETS, LIP SEAL, SEAL & RETAINING RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010492
 

173-3435: SCREEN GP-HYDRAULIC

173-3435 SCREEN GP-HYDRAULIC -HYDRAULIC TANK
S/N MAC1-UP; PAC1-UP
PART OF 193-3606 TANK & FILTER GP-HYDRAULIC
i01465258 SEBP3601
1733435 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-6641 [1] GUIDE  
2. 095-6639 [1] SPRING  
3. 087-5317 [1] ROD  
4. 8T-4133 M [2] NUT (M10X1.5-THD)  
5. 209-6000 [1] SCREEN AS (HYDRAULIC TANK)  
6. 5H-5672 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP36010493
 

159-7841: SWIVEL GP

159-7841 SWIVEL GP
S/N MAC1-UP; PAC1-UP
PART OF 175-6000, 175-6013 LINES GP-TRAVEL MOTOR
i01258282 SEBP3601
1597841 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
2. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
3. 7Y-4817 [1] COVER  
4. 095-1716 [1] SEAL-O-RING  
5. 7I-7131 [1] RETAINER  
6. 7Y-4801 [1] HOUSING  
7. 159-7782 [5] SEAL  
8. 095-1625 [3] SEAL-O-RING  
9. 4I-6262 [1] ROTOR GP-SWIVEL  
10. 8T-6759 [1] PLUG-PIPE  
  M   METRIC PART
 

#SEBP36010494
 

193-3606: TANK & FILTER GP-HYDRAULIC

193-3606 TANK & FILTER GP-HYDRAULIC
S/N MAC1-289; PAC1-381
240-L (62.4-US GAL)
PART OF 193-3605 TANK & MTG GP-HYDRAULIC
i01844783 SEBP3601
1933606 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] TANK AS-HYDRAULIC  
2. 173-3435 Y [1] SCREEN GP-HYDRAULIC  
3. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
4. 8T-4121 [19] WASHER-HARD (11X21X2.5-MM THK)  
5. 7Y-1976 E HOSE-WATER (125CM)  
6. 175-6034 [1] COVER AS  
7. 095-1730 [1] SEAL-O-RING  
8. 4I-3745 [1] CAP-PRESSURE  
9. 1P-4278 [1] CLAMP-HOSE  
10. 8M-2770 [3] CLIP (LOOP)  
11. 8T-4133 M [3] NUT (M10X1.5-THD)  
12. 207-6403 [1] PLUG  
13. 207-6404 [1] WASHER (49.5X60.5X1.5-MM THK)  
14. 095-1608 [1] SEAL-O-RING  
15. 213-0677 [1] SWITCH AS-LIQUID LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
16. 3D-2824 [1] SEAL-O-RING  
17. 4I-5394 [1] SENDER AS-TEMPERATURE  
  4I-5490 M [2] SCREW-MACHINE (M4X0.7X6-MM)  
  095-0826 [2] LOCKWASHER  
18. 3K-0360 [1] SEAL-O-RING  
19. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
20. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 173-3434 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
22. 1H-8278 [1] SEAL-O-RING  
23. 2H-3934 [1] SEAL-O-RING  
24. 175-6173 [1] PIPE  
25. 175-6177 [1] FLANGE AS  
  175-6176 [1] SEAL-O-RING  
26. 170-9419 [1] SWITCH AS-PRESSURE (HYDRAULIC OIL)  
  2M-9780 [1] SEAL-O-RING  
  4I-0754 [1] SEAL-O-RING  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
27. 8T-0273 M [4] BOLT-SOCKET HEAD (M12X1.75X40-MM)  
28. 094-3245 [1] GAUGE GP-SIGHT  
  7Y-4754 [2] BLOCK  
  094-3247 M [2] BOLT (M10X1.5X36-MM)  
  095-1514 [4] SEAL-O-RING  
  095-1517 [4] SEAL-O-RING  
  096-4754 [1] PIPE  
29. 175-6035 [1] COVER  
30. 4M-0189 [1] SEAL-O-RING  
31. 8H-9819 [1] ADAPTER-PLUG  
32. 4B-7739 [1] PLUG-DRAIN  
33. 2B-0858 [1] PLUG-PIPE  
34. 4J-5267 [1] SEAL-O-RING  
35. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
36. 114-0741 [1] COVER  
37. 4J-0522 [1] SEAL-O-RING  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010495
 

193-3606: TANK & FILTER GP-HYDRAULIC

193-3606 TANK & FILTER GP-HYDRAULIC
S/N MAC290-UP; PAC382-UP
240-L (62.4-US GAL)
PART OF 193-3605 TANK & MTG GP-HYDRAULIC
Type 1
i02366367 SEBP3601
1933606 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] TANK AS-HYDRAULIC  
2. 173-3435 Y [1] SCREEN GP-HYDRAULIC  
3. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
4. 8T-4121 [19] WASHER-HARD (11X21X2.5-MM THK)  
5. 7Y-1976 E HOSE-WATER (125-CM)  
6. 175-6034 [1] COVER AS  
7. 095-1730 [1] SEAL-O-RING  
8. 4I-3745 [1] CAP-PRESSURE  
9. 1P-4278 [1] CLAMP-HOSE  
10. 8M-2770 [3] CLIP (LOOP)  
11. 8T-4133 M [3] NUT (M10X1.5-THD)  
12. 207-6403 [1] PLUG  
13. 207-6404 [1] WASHER (49.5X60.5X1.5-MM THK)  
14. 095-1608 [1] SEAL-O-RING  
15. 213-0677 [1] SWITCH AS-LIQUID LEVEL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
16. 3D-2824 [1] SEAL-O-RING  
17. 4I-5394 [1] SENDER AS-TEMPERATURE  
  4I-5490 M [2] SCREW-MACHINE (M4X0.7X6-MM)  
  095-0826 [2] LOCKWASHER  
18. 3K-0360 [1] SEAL-O-RING  
19. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
20. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 173-3434 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
22. 1H-8278 [1] SEAL-O-RING  
23. 2H-3934 [1] SEAL-O-RING  
24. 175-6173 [1] PIPE  
25. 175-6177 [1] FLANGE AS  
  175-6176 [1] SEAL-O-RING  
26. 170-9419 [1] SWITCH AS-PRESSURE (HYDRAULIC OIL)  
  2M-9780 [1] SEAL-O-RING  
  4I-0754 [1] SEAL-O-RING  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
27. 8T-0273 M [4] BOLT-SOCKET HEAD (M12X1.75X40-MM)  
28. 227-0620 CY [1] GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL)(HYDRAULIC OIL LEVEL)  
29. 175-6035 [1] COVER  
30. 4M-0189 [1] SEAL-O-RING  
31. 8H-9819 [1] ADAPTER-PLUG  
32. 4B-7739 [1] PLUG-DRAIN  
33. 2B-0858 [1] PLUG-PIPE  
34. 4J-5267 [1] SEAL-O-RING  
35. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
36. 114-0741 [1] COVER  
37. 4J-0522 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP36010496
 

193-3606: TANK & FILTER GP-HYDRAULIC

193-3606 TANK & FILTER GP-HYDRAULIC
S/N MAC290-UP; PAC382-UP
240-L (62.4-US GAL)
PART OF 193-3605 TANK & MTG GP-HYDRAULIC
Type 2
i02374352 SEBP3601
1933606 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4J-0522 [1] SEAL-O-RING  
2. 173-3435 Y [1] SCREEN GP-HYDRAULIC  
3. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
4. 8T-4121 [19] WASHER-HARD (11X21X2.5-MM THK)  
5. 7Y-1976 E HOSE-WATER (125-CM)  
6. 175-6034 [1] COVER AS  
7. 095-1730 [1] SEAL-O-RING  
8. 4I-3745 [1] CAP-PRESSURE (HYDRAULIC TANK)  
9. 1P-4278 [1] CLAMP-HOSE  
10. 8M-2770 [3] CLIP (LOOP)  
11. 8T-4133 M [3] NUT (M10X1.5-THD)  
12. 207-6403 [1] PLUG  
13. 207-6404 [1] WASHER (49.5X60.5X1.5-MM THK)  
14. 095-1608 [1] SEAL-O-RING  
15. 213-0677 [1] SWITCH AS-LIQUID LEVEL (HYDRAULIC OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
  144-1636 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
16. 3D-2824 [1] SEAL-O-RING  
17. 4I-5394 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
  4I-5490 M [2] SCREW-MACHINE (M4X0.7X6-MM)  
  095-0826 [2] LOCKWASHER  
18. 3K-0360 [1] SEAL-O-RING  
19. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
20. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 188-4145 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
22. 1H-8278 [1] SEAL-O-RING  
23. 2H-3934 [1] SEAL-O-RING  
24. 175-6173 [1] PIPE  
25. 175-6177 [1] FLANGE AS  
  175-6176 [1] SEAL-O-RING  
26. 170-9419 [1] SWITCH AS-PRESSURE (HYDRAULIC OIL)  
  2M-9780 [1] SEAL-O-RING  
  4I-0754 [1] SEAL-O-RING  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE & WEDGE)
27. 8T-0273 M [4] BOLT-SOCKET HEAD (M12X1.75X40-MM)  
28. 227-0620 Y [1] GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL)(HYDRAULIC OIL LEVEL)  
29. 175-6035 [1] COVER  
30. 4M-0189 [1] SEAL-O-RING  
31. 8H-9819 [1] ADAPTER-PLUG  
32. 4B-7739 [1] PLUG-DRAIN  
33. 2B-0858 [1] PLUG-PIPE  
34. 4J-5267 [1] SEAL-O-RING  
35. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
36. 114-0741 [1] COVER  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010497
 

193-3605: TANK & MTG GP-HYDRAULIC

193-3605 TANK & MTG GP-HYDRAULIC
S/N MAC1-UP; PAC1-UP
PART OF 201-9327, 201-9328 HYDRAULIC AR
i01833741 SEBP3601
1933605 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 193-3606 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 7X-2553 M [4] BOLT (M16X2X40-MM)  
3. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010498
 

153-8769: VALVE & MTG GP-CONTROL

153-8769 VALVE & MTG GP-CONTROL -COMBINED FLOW
S/N MAC1-UP; PAC1-UP
PART OF 202-6931 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
i01706467 SEBP3601
1538769 VALVE & MTG GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-0146 Y [1] VALVE GP-CONTROL (AUXILIARY)  
2. 201-9354 Y [1] VALVE GP-CONTROL (MEDIUM PRESSURE)  
3. 179-5107 M [4] BOLT (M16X2X220-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36010499
 

153-8769: VALVE & MTG GP-CONTROL

153-8769 VALVE & MTG GP-CONTROL -COMBINED FLOW
S/N MAC1-UP; PAC1-UP
PART OF 202-6931 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
i02409257 SEBP3601
1538769 VALVE & MTG GP-CONTROL Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 244-8421 CY [1] VALVE GP-CONTROL (AUXILIARY)(1-PUMP/2-PUMP)  
2. 244-8401 CY [1] VALVE GP-CONTROL (MEDIUM PRESSURE)(ROTATOR MOTOR)  
3. 7X-2560 M [4] BOLT (M16X2X220-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 320C :

PUMP GP-GEAR
448-3702 PUMP GP-GEAR
PUMP GP-GEAR
349-4087 PUMP GP-GEAR
PUMP GP-GEAR
240-2998 PUMP GP-GEAR
PUMP GP-GEAR
209-6057 PUMP GP-GEAR
PUMP & MTG GP-MAIN HYDRAULIC
162-6176 PUMP & MTG GP-MAIN HYDRAULIC
PUMP & MTG GP-MAIN HYDRAULIC
162-6176 PUMP & MTG GP-MAIN HYDRAULIC
PUMP & MTG GP-AUXILIARY
204-2747 PUMP & MTG GP-AUXILIARY
PUMP & MTG GP-AUXILIARY
204-2747 PUMP & MTG GP-AUXILIARY
PUMP GP-MAIN HYDRAULIC
244-8483 PUMP GP-MAIN HYDRAULIC
SCREEN GP-HYDRAULIC
173-3435 SCREEN GP-HYDRAULIC
SWIVEL GP
159-7841 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
193-3606 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
193-3606 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
193-3606 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
193-3605 TANK & MTG GP-HYDRAULIC
VALVE & MTG GP-CONTROL
153-8769 VALVE & MTG GP-CONTROL

Truck sale:

 
 
Caterpillar 320C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
288,000 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 320C, Crawler Excavators, Construction
45,597 
Caterpillar 320C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.