AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

134-1080 AXLE GP-FRONT S/N CAF1-523 PART OF 162-5603 GENERAL AR 120H MOTOR GRADER


FRAME AND BODY
AXLE GP
CASE & FRAME GP
COVER GP
ENCLOSURE GP
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
FRAME AND BODY
FRAME GP

MOTOR GRADER 120H MOTOR GRADER CAF
 120H Motor Grader CAF00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3617 120H CAF   (2001)

FRAME AND BODY

AXLE GP
AXLE GP-FRONT
134-1080 AXLE GP-FRONT
AXLE GP-FRONT
134-1080 AXLE GP-FRONT
 

#SEBP36170540
 

134-1080: AXLE GP-FRONT

134-1080 AXLE GP-FRONT
S/N CAF1-523
PART OF 162-5603 GENERAL AR
i00507096 SEBP3617
1341080 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-5288 [2] SEAL GP-DUO-CONE  
2. 2G-8626 [2] WASHER-THRUST (2.02X3.63X0.16-IN THK)  
3. 3B-8489 [7] FITTING-GREASE (1/8-27 PTF)(WHEEL LEAN CYLINDER)  
4. 4D-3704 [2] WASHER-HARD (17X30X5-MM THK)  
5. 2G-8615 [4] WASHER-THRUST (2.015X3.625X0.11-IN THK)  
6. 2G-8742 [2] WASHER-HARD (20X65X5-MM THK)  
7. 2H-3740 [4] BOLT (3/4-16X1.25-IN)  
8. 2G-8741 [4] RING-METAL SEAL  
9. 2G-8777 [4] SEAL  
10. 9M-2092 [4] SEAL-O-RING  
11. 8W-5293 [4] PIN  
12. 8W-4652 [1] HOUSING-SPINDLE  
13. 8W-4653 [1] HOUSING-SPINDLE  
14. 8D-2811 [2] WASHER (1.25X1.94X0.032-IN THK)  
15. 2G-8633 [2] PIN  
16. 1D-4627 [2] BOLT (7/8-9X3-IN)  
17. 2J-3505 [2] NUT-FULL (7/8-9-THD)  
18. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
19. 5P-8842 [8] SEAL-LIP TYPE  
20. 3B-8489 [4] FITTING-GREASE (1/8-27 PTF)(STEERING CYLINDER)  
21. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
22. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
23. 2G-8768 [4] WASHER (10.5X53.8X3-MM THK)  
24. 103-9125 [1] BAR AS  
  2G-8624 [2] BUSHING  
25. 5P-8890 [2] SEAL-LIP TYPE  
26. 030-0060 [2] CUP-BEARING  
27. 030-0061 [2] CONE-BEARING  
28. 7D-8637 [2] CUP-BEARING  
29. 7D-8636 [2] CONE-BEARING  
30. 3B-4618 [2] PIN-COTTER  
31. 7D-8643 [2] RETAINER  
32. 2G-3865 B [6] SHIM (0.127-MM THK)  
33. 0V-0375 [6] BOLT (1/2-13X3.25-IN)  
34. 9D-9797 [2] LOCK  
35. 5T-0906 [2] COVER  
36. 2J-8163 [2] SEAL-O-RING  
37. 5D-0353 [4] BOLT-LOCKING (3/8-16X1-IN)  
38. 0S-1585 [1] BOLT (1/2-13X1.5-IN)  
39. 7D-1649 [1] WASHER-HARD (13.5X32X5-MM THK)  
40. 5P-8843 [2] SEAL-LIP TYPE  
41. 2G-5673 B [2] WASHER (2.031X4X0.06-IN THK)  
42. 9G-5211 [1] SPACER (12.95X19.05X9-MM THK)  
43. 130-3595 [1] PIN AS  
44. 147-3400 [2] SPINDLE  
45. 0S-1592 [2] BOLT (5/8-11X1.25-IN)  
46. 2G-5667 [2] RETAINER  
47. 7D-8912 Y [1] LINK GP-STEERING  
48. 134-1081 [1] AXLE AS-FRONT  
49. 2G-8631 [4] BUSHING  
50. 131-4428 [2] BUSHING  
51. 8X-3434 [1] ARM AS-LEANING (LH)  
52. 146-1842 [1] BUSHING  
53. 146-1843 [1] BUSHING  
54. 8W-6476 [1] PIN  
56. 8X-3435 [1] ARM AS-LEANING (RH)  
57. 146-1842 [1] BUSHING  
58. 146-1843 [1] BUSHING  
59. 8W-6497 [1] PIN  
61. 9D-3523 [1] WASHER (2.062X4X0.188-IN)  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36170541
 

134-1080: AXLE GP-FRONT

134-1080 AXLE GP-FRONT
S/N CAF524-UP
PART OF 162-5603 GENERAL AR
i02399307 SEBP3617
1341080 AXLE GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5K-5288 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  5K-5129 [2] RING-SEALING  
2. 2G-8626 [2] WASHER-THRUST (2.02X3.63X0.16-IN THK)  
3. 3B-8489 [12] FITTING-GREASE (1/8-27 PTF)  
4. 4D-3704 [2] WASHER-HARD (17X30X5-MM THK)  
5. 2G-8615 [4] WASHER-THRUST (2.015X3.625X0.11-IN THK)  
6. 2G-8742 [2] WASHER-HARD (20X65X5-MM THK)  
7. 2H-3740 [4] BOLT (3/4-16X1.25-IN)  
8. 2G-8741 [4] RING-METAL SEAL  
9. 2G-8777 [4] SEAL  
10. 9M-2092 [4] SEAL-O-RING  
11. 8W-5293 [4] PIN  
12. 8W-4652 [1] HOUSING-SPINDLE  
13. 8W-4653 [1] HOUSING-SPINDLE  
14. 8D-2811 [2] WASHER (1.25X1.94X0.032-IN THK)  
15. 2G-8633 [2] PIN  
16. 6C-3210 [2] BOLT (7/8-9X3-IN)  
17. 2J-3505 [2] NUT-FULL (7/8-9-THD)  
18. 7X-7731 [2] PLUG-PIPE (3/4-14-THD)  
19. 433-7105 [8] SEAL-PIN  
20. 9D-3523 [1] WASHER (2.062X4X0.188-IN)  
21. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
22. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
23. 2G-8768 [4] WASHER (10.5X53.8X3-MM THK)  
24. 103-9125 [1] BAR AS  
24A. 2G-8624 [2] BUSHING  
25. 5P-8890 [2] SEAL-LIP TYPE  
26. 030-0060 [2] CUP-BEARING  
27. 030-0061 [2] CONE-BEARING  
28. 7D-8637 [2] CUP-BEARING  
29. 7D-8636 [2] CONE-BEARING  
30. 3B-4618 [2] PIN-COTTER  
31. 7D-8643 [2] RETAINER  
32. 2G-3865 B [6] SHIM (0.127-MM THK)  
33. 0V-0375 [6] BOLT (1/2-13X3.25-IN)  
34. 9D-9797 [2] LOCK  
35. 5T-0906 [2] COVER  
36. 2J-8163 [2] SEAL-O-RING  
37. 5D-0353 [4] BOLT-LOCKING (3/8-16X1-IN)  
38. 6C-3241 [1] BOLT (1/2-13X1.5-IN)  
39. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
40. 5P-8843 [2] SEAL-LIP TYPE  
41. 2G-5673 B [2] WASHER (2.031X4X0.06-IN THK)  
42. 9G-5211 [1] SPACER (12.95X19.05X9-MM THK)  
43. 130-3595 [1] PIN AS  
44. 147-3400 [2] SPINDLE  
45. 0S-1592 [2] BOLT (5/8-11X1.25-IN)  
46. 2G-5667 [2] RETAINER  
47. 131-3740 Y [1] LINK GP-STEERING  
48. 134-1081 [1] AXLE AS-FRONT  
49. 2G-8631 [4] BUSHING  
50. 131-4428 [2] BUSHING  
51. 8X-3434 [1] ARM AS-LEANING (LH)  
52. 146-1842 [1] BUSHING  
53. 146-1843 [1] BUSHING  
54. 8W-6476 [1] PIN  
56. 8X-3435 [1] ARM AS-LEANING (RH)  
57. 146-1842 [1] BUSHING  
58. 146-1843 [1] BUSHING  
59. 8W-6497 [1] PIN  
  B   USE AS REQUIRED
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP36170542
 

162-1513: CASE & FRAME GP

162-1513 CASE & FRAME GP
S/N CAF1-UP
PART OF 162-5603 GENERAL AR
i01673295 SEBP3617
1621513 CASE & FRAME GP Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2A-3398 [1] GASKET (TRANSMISSION OIL DRAIN)  
2. 4K-0367 [1] NUT-FULL (5/8-11-THD)  
3. 8M-3837 [1] PLUG-MAGNETIC (TRANSMISSION OIL DRAIN)  
4. 105-6491 [1] BOLT-ADJUSTMENT (5/8-11X3.15-IN)  
5. 173-3274 [1] CASE & FRAME AS  
5A. 198-9298 [1] VALVE-DRAIN (FUEL SUMP)  
5B. 4W-4813 [1] PLUG  
5C. 009-2062 [1] SEAL-O-RING  
6. 2D-8822 [40] STUD-TAPERLOCK (5/8-11X2.36-IN)  
7. 4D-8148 [3] DOWEL  
8. 5M-1932 [12] STUD-TAPERLOCK (1/2-13X2.17-IN)  
 

#SEBP36170543
 

126-6933: COVER GP-PROTECTION

126-6933 COVER GP-PROTECTION -ACCUGRADE
S/N CAF1-249
PART OF 207-3665, 210-2042 CONVERSION AR-CERTIFICATION, 277-5440, 277-5442 CONVERSION AR-MACHINE, 247-6454 GRADE CONTROL AR
AN ATTACHMENT
i00126178 SEBP3617
1266933 COVER GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-3011 B [1] SPACER (10.5X22X73.5-MM THK)  
2. 126-6929 [1] COVER  
3. 126-6930 [1] COVER  
4. 129-5049 [4] BRACKET AS  
5. 201-7603 [2] PLATE-WARNING (CRUSH HAZARD)  
6. 220-1922 [2] BRACKET  
7. 1F-5339 [4] LUG (3/8-16-THD)  
8. 4L-6454 [4] BOLT (3/8-16X1-IN)  
9. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
10. 5P-1075 [14] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 6D-4244 [2] CLIP (LOOP)  
12. 6V-8801 [2] NUT (3/8-16-THD)  
13. 7X-0291 B [1] BOLT (3/8-16X3.75-IN)  
14. 8T-8915 [4] BOLT (3/8-16X3.25-IN)  
15. 9D-5659 [2] BOSS (3/8-16X1.19-IN)  
  B   USE AS REQUIRED
 

#SEBP36170544
 

126-6933: COVER GP-PROTECTION

126-6933 COVER GP-PROTECTION -ACCUGRADE
S/N CAF250-UP
PART OF 207-3665, 210-2042 CONVERSION AR-CERTIFICATION, 277-5440, 277-5442 CONVERSION AR-MACHINE, 247-6454 GRADE CONTROL AR
Type 1
AN ATTACHMENT
i02064126 SEBP3617
1266933 COVER GP-PROTECTION Parts scheme 1266933 COVER GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-8050 C [1] SPACER (11X19X57-MM THK)  
2. 129-5049 [4] BRACKET AS  
3. 201-7603 [2] PLATE-WARNING (CRUSH HAZARD)  
4. 224-5844 C [1] COVER (LH)  
5. 224-5845 C [1] COVER (RH)  
6. 224-5912 C [1] BRACKET  
7. 231-5251 C [1] BRACKET  
8. 1F-5339 [4] LUG (3/8-16-THD)  
9. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
10. 5P-1075 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 6V-8801 [2] NUT (3/8-16-THD)  
14. 8T-8915 C [5] BOLT (3/8-16X3.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP36170545
 

126-6933: COVER GP-PROTECTION

126-6933 COVER GP-PROTECTION -ACCUGRADE
S/N CAF250-UP
PART OF 207-3665, 210-2042 CONVERSION AR-CERTIFICATION, 277-5440, 277-5442 CONVERSION AR-MACHINE, 247-6454 GRADE CONTROL AR
Type 2
AN ATTACHMENT
i02230061 SEBP3617
1266933 COVER GP-PROTECTION Parts scheme 1266933 COVER GP-PROTECTION Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-8050 [1] SPACER (11X19X57-MM THK)  
2. 129-5049 [4] BRACKET AS  
3. 224-5912 [1] BRACKET  
4. 226-1240 [2] FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL)  
5. 231-5251 [1] BRACKET  
6. 245-3930 C [1] COVER (RH)(RH)  
7. 245-3933 C [1] COVER (LH)(LH)  
8. 1F-5339 [4] LUG (3/8-16-THD)  
9. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
10. 5P-1075 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
11. 5S-7382 [2] BOLT (3/8-16X1.375-IN)  
12. 6V-1889 [1] CLIP (LOOP)  
13. 6V-8801 [2] NUT (3/8-16-THD)  
14. 8T-8915 [5] BOLT (3/8-16X3.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP36170546
 

162-1511: ENCLOSURE GP-ENGINE

162-1511 ENCLOSURE GP-ENGINE
S/N CAF1-UP
PART OF 162-5603 GENERAL AR
Type 1
i01673474 SEBP3617
1621511 ENCLOSURE GP-ENGINE Parts scheme 1621511 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [2] WASHER (10.5X30X3-MM THK)  
2. 4B-4909 [2] SPRING  
3. 132-4354 [2] SPACER (10.5X19X26.5-MM THK)  
4. 139-2944 [2] ROD  
5. 175-5484 [1] DASH AS  
6. 175-6287 [1] PLATE AS  
7. 176-2918 [1] PILLAR AS (RH)  
8. 176-2922 [1] PILLAR AS (LH)  
9. 176-5767 [2] CATCH AS  
10. 177-2932 [2] CATCH AS  
11. 177-4120 [2] HANDHOLD  
12. 187-0976 [2] PLATE  
13. 192-5629 [4] LATCH AS  
    (EACH INCLUDES)
  126-7168 [1] LOCK AS  
  7F-9223 [1] LOCKWASHER  
  8T-5004 [1] SCREW-MACHINE (1/4-28X0.375-IN)  
14. 192-5638 [4] PAWL  
15. 194-4939 [2] SHIM  
16. 194-7987 [1] COVER AS  
17. 197-6853 [1] HOOD AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
18. 197-6855 [1] DOOR AS  
  178-0131 [1] HINGE  
19. 197-6857 [1] DOOR AS  
  178-0131 [1] HINGE  
20. 197-8510 [2] HANDRAIL  
21. 197-8606 [1] PANEL AS (RH)  
22. 197-8608 [1] PANEL AS (LH)  
23. 199-9983 [2] HANDHOLD AS  
24. 212-3590 [1] PLATE  
25. 212-3591 [1] PLATE  
26. 216-4267 [1] PANEL AS  
  7T-1099 [1] LINK  
27. 216-4269 [1] PANEL AS  
28. 127-4038 M [16] SCREW-MACHINE (M6X1X16-MM)  
29. 129-3178 M [16] LOCKNUT (M6X1-THD)  
30. 2K-5986 [2] PIN-SPRING  
31. 5P-1076 [12] WASHER-HARD (13.5X30X4-MM THK)  
32. 7X-0632 [4] WASHER-HARD (11X36X6-MM THK)  
33. 7X-7729 [60] WASHER (11X25X3-MM THK)  
34. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
35. 8T-4133 M [4] NUT (M10X1.5-THD)  
36. 8T-4136 M [49] BOLT (M10X1.5X25-MM)  
37. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
38. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
39. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
40. 8T-4195 M [15] BOLT (M10X1.5X30-MM)  
41. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
42. 9X-8256 [16] WASHER (6.6X12X2-MM THK)  
43. 5P-5923 D SEAL (1.5M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP36170547
 

162-1511: ENCLOSURE GP-ENGINE

162-1511 ENCLOSURE GP-ENGINE
S/N CAF1-UP
PART OF 162-5603 GENERAL AR
Type 2
i01989905 SEBP3617
1621511 ENCLOSURE GP-ENGINE Parts scheme 1621511 ENCLOSURE GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3P-9900 [2] WASHER (10.5X30X3-MM THK)  
2. 4B-4909 [2] SPRING  
3. 132-4354 [2] SPACER (10.5X19X26.5-MM THK)  
4. 139-2944 [2] ROD  
5. 175-5484 [1] DASH AS  
  8T-3490 M [15] NUT-WELD (M10X1.5-THD)  
6. 175-6287 [1] PLATE AS  
  8T-3490 M [5] NUT-WELD (M10X1.5-THD)  
7. 176-2918 [1] PILLAR AS (RH)  
  8T-3490 M [10] NUT-WELD (M10X1.5-THD)  
8. 176-2922 [1] PILLAR AS (LH)  
  8T-3490 M [10] NUT-WELD (M10X1.5-THD)  
9. 176-5767 [2] CATCH AS  
    (EACH INCLUDES)
  176-5768 [1] PLATE  
10. 177-2932 [2] CATCH AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
11. 177-4120 [2] HANDHOLD  
12. 187-0976 [2] PLATE  
13. 192-5629 [4] LATCH AS  
    (EACH INCLUDES)
  226-0291 [1] LOCK AS  
  226-0330 [1] CAM-LOCK  
14. 192-5638 [4] PAWL  
15. 194-4939 B [2] SHIM  
16. 194-6158 C [1] COVER AS  
17. 197-6853 [1] HOOD AS  
  8T-3490 M [6] NUT-WELD (M10X1.5-THD)  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
18. 197-6855 [1] DOOR AS (RH)  
  178-0131 [1] HINGE  
19. 197-6857 [1] DOOR AS (LH)  
  178-0131 [1] HINGE  
20. 197-8510 [2] HANDRAIL  
21. 197-8606 [1] PANEL AS (RH)  
22. 197-8608 [1] PANEL AS (LH)  
23. 199-9983 [2] HANDHOLD AS  
24. 212-3590 [1] PLATE  
25. 212-3591 [1] PLATE  
26. 233-2163 C [1] PANEL AS  
  7T-1099 [1] LINK  
27. 233-2164 C [1] PANEL AS  
28. 127-4038 M [16] SCREW-MACHINE (M6X1X16-MM)  
29. 129-3178 M [16] LOCKNUT (M6X1-THD)  
30. 2K-5986 [2] PIN-SPRING  
31. 5P-1076 C [10] WASHER-HARD (13.5X30X4-MM THK)  
32. 7X-0632 [4] WASHER-HARD (11X36X6-MM THK)  
33. 7X-7729 C [62] WASHER (11X25X3-MM THK)  
34. 8T-0389 M [4] LOCKNUT (M10X1.5-THD)  
35. 8T-4133 M [4] NUT (M10X1.5-THD)  
36. 8T-4136 M [49] BOLT (M10X1.5X25-MM)  
37. 8T-4139 CM [8] BOLT (M12X1.75X30-MM)  
38. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
39. 8T-4182 M [2] BOLT (M10X1.5X45-MM)  
40. 8T-4195 CM [17] BOLT (M10X1.5X30-MM)  
41. 8T-4994 [2] WASHER-HARD (20X36.5X3.5-MM THK)  
42. 9X-8256 [16] WASHER (6.6X12X2-MM THK)  
43. 5P-5923 BD SEAL  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP36170548
 

230-7570: FASTENER GP-GREASE LINES

230-7570 FASTENER GP-GREASE LINES -CENTRAL LUBRICATION MOUNTING
S/N CAF1-UP
PART OF 162-5603 GENERAL AR
i01892331 SEBP3617
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4140 M [4] BOLT (M16X2X60-MM)  
  3E-4356 [4] WASHER-HARD (17.5X30X6-MM THK)  
  M   METRIC PART
 

#SEBP36170549
 

162-1508: FRAME GP-FRONT

162-1508 FRAME GP-FRONT
S/N CAF1-UP
PART OF 162-5603 GENERAL AR
i01673531 SEBP3617
1621508 FRAME GP-FRONT Parts scheme 1621508 FRAME GP-FRONT Parts scheme
  For full view, you need register

Parts for your 120H MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-3791 [1] PIN  
2. 8X-3200 [1] PLATE AS  
3. 9D-6584 [9] SEAL-LIP TYPE  
4. 9D-9256 [1] PIN (STEERING FRAME LOCK)  
5. 142-1814 [2] COVER  
6. 144-2161 [1] PLATE  
7. 145-5966 [1] COVER  
8. 145-5967 [1] COVER  
9. 169-0446 [1] FRAME AS  
10. 191-5293 [1] INSULATION  
11. 4L-6454 [7] BOLT (3/8-16X1-IN)  
12. 5M-3062 [20] BOLT (3/8-16X0.75-IN)  
13. 5P-1075 [27] WASHER-HARD (10.2X22.5X3-MM THK)  
14. 5P-8167 [3] BOLT (3/8-16X0.625-IN)  
15. 8T-4896 [16] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 9D-0178 [4] BEARING  
17. 9D-3311 [1] BUSHING  
18. 5P-5969 BD [1] SEAL  
19. BE TAPE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

Information:

Caterpillar Parts SIS Catalog 120H :

216-7445 WHEEL GP
186-4460 WHEEL GP
170-0436 WHEEL GP
148-2408 WHEEL GP
148-2404 WHEEL GP
142-6304 WHEEL GP
142-6232 WHEEL GP
142-6230 WHEEL GP
AXLE GP-FRONT
134-1080 AXLE GP-FRONT
CASE & FRAME GP
162-1513 CASE & FRAME GP
COVER GP-PROTECTION
126-6933 COVER GP-PROTECTION
COVER GP-PROTECTION
126-6933 COVER GP-PROTECTION
COVER GP-PROTECTION
126-6933 COVER GP-PROTECTION
ENCLOSURE GP-ENGINE
162-1511 ENCLOSURE GP-ENGINE
ENCLOSURE GP-ENGINE
162-1511 ENCLOSURE GP-ENGINE
230-7570 FASTENER GP-GREASE LINES

Truck sale:

Caterpillar 120H
 
Caterpillar 120H
- motor graders
CAVPOWER
 
105,000 
Caterpillar 120H, motor graders, Construction


 
105,000 
Caterpillar 120H, motor graders, Construction


Caterpillar 120H, motor graders, Construction
105,000 
Caterpillar 120H, motor graders, Construction

RING POWER CORP.
Caterpillar 120H, motorgrader mijnbouw, Bouw
 
Caterpillar 120H, motorgrader mijnbouw, Bouw

CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.