BASIC ENGINE
DRIVE GP-FANFLYWHEEL GP
GEAR GP
HOUSING GP-FLYWHEEL
GEAR GP
MOUNTING GP-ALTERNATOR
MOUNTING GP-ENGINE
MOUNTING GP-STARTING MOTOR
PAN GP-OIL
PISTON & ROD GP
BASIC ENGINE
DRIVE GP-FAN
#SEBP36260020
212-8556: DRIVE GP-FAN
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-0796 | [17] | LOCKWASHER | |
| 2. | 8T-4196 M | [11] | BOLT (M10X1.5X35-MM) | |
| 3. | 212-8589 | [1] | BRACKET | |
| 4. | 212-8590 | [1] | COVER | |
| 6. | 212-8592 | [1] | SPACER | |
| 7. | 212-8593 | [1] | PLATE | |
| 8. | 212-8594 | [6] | BOLT | |
| 9. | 212-8595 | [2] | BEARING | |
| 10. | 212-8596 | [2] | BUSHING | |
| 11. | 212-8597 | [1] | RING | |
| 12. | 212-8598 | [1] | RING | |
| M | METRIC PART | |||
#SEBP36260021
205-6792: FLYWHEEL GP
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS#SEBP36260022
212-8550: GEAR GP-FRONT
For full view, you need register
#SEBP36260023
196-7972: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 2. | 7X-0796 | [12] | LOCKWASHER | |
| 3. | 5I-7660 | [1] | SEAL AS | |
| 4. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 5. | 5I-4983 | [2] | STUD | |
| 6. | 324-4131 | [1] | SENSOR GP-SPEED | |
| 7. | 6V-8231 M | [2] | NUT (M10X1.25-THD) | |
| 8. | 5I-7661 | [1] | GASKET | |
| 9. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 10. | 3B-4505 | [4] | LOCKWASHER | |
| 11. | 8T-4195 M | [8] | BOLT (M10X1.5X30-MM) | |
| 12. | 125-2965 | [1] | HOUSING | |
| 13. | 5I-7607 | [1] | PLUG | |
| M | METRIC PART | |||
#SEBP36260024
212-8547: HOUSING GP-FRONT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 2. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 3. | 096-9435 | [1] | PLUG | |
| 4. | 096-9532 | [1] | WASHER (15.8X22.5X2-MM THK) | |
| 5. | 096-9528 | [1] | SEAL-O-RING | |
| 6. | 6F-7556 | [2] | COVER | |
| 7. | 5I-7632 | [1] | PIPE | |
| 8. | 324-4223 | [1] | SEAL | |
| 9. | 6F-7557 | [2] | GASKET | |
| 10. | 5I-7683 | [1] | SPINDLE | |
| 11. | 178-6537 | [1] | GASKET | |
| 12. | 5I-7558 | [1] | GEAR AS (9-TEETH) | |
| 13. | 5I-7559 | [1] | VALVE AS | |
| 14. | 2Y-5872 | [1] | GASKET | |
| 15. | 178-6538 | [1] | COVER AS | |
| 16. | 5I-7686 | [1] | GEAR AS (24-TEETH) | |
| 17. | 255-3069 | [1] | BODY AS | |
| 18. | 125-2950 | [1] | GEAR AS (9-TEETH) | |
| 19. | 125-2951 | [1] | GEAR (23-TEETH) | |
| 20. | 222-8292 | [1] | POINTER | |
| 21. | 7X-2536 M | [1] | BOLT (M8X1.25X14-MM) | |
| 22. | 6V-8236 | [1] | PIN-SPRING | |
| 23. | 5I-7659 | [1] | PLATE | |
| 24. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 25. | 8T-4177 M | [2] | BOLT (M8X1.25X90-MM) | |
| 26. | 8T-6870 M | [1] | BOLT (M8X1.25X70-MM) | |
| 27. | 3B-4505 | [16] | LOCKWASHER | |
| 28. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 29. | 5I-7610 M | [1] | BOLT (M10X1.5X20-MM) | |
| 30. | 5I-4969 M | [2] | BOLT (M10X1.5X20-MM) | |
| 31. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 32. | 8T-5005 M | [4] | BOLT (M10X1.5X70-MM) | |
| 33. | 8T-4172 M | [2] | BOLT (M10X1.5X80-MM) | |
| 34. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 35. | 212-8510 M | [2] | NUT (M10X1.25-THD) | |
| 36. | 7X-0796 | [17] | LOCKWASHER | |
| 37. | 5I-7534 | [1] | GASKET | |
| 38. | 5I-7658 | [1] | GASKET | |
| 39. | 5I-7657 | [1] | GASKET | |
| 40. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 41. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 42. | 212-8571 | [1] | COVER | |
| 43. | 212-8572 | [1] | GASKET | |
| 44. | 212-8573 | [3] | BOLT | |
| M | METRIC PART | |||
#SEBP36260025
178-6531: MOUNTING GP-ALTERNATOR
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6597 | [1] | PLATE | |
| 2. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 096-2501 | [3] | LOCKWASHER | |
| 4. | 099-4483 M | [1] | BOLT (M12X1.25X30-MM) | |
| 5. | 5I-7750 | [2] | WASHER (12.5X25X8-MM THK) | |
| 6. | 7X-0796 | [1] | LOCKWASHER | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 8. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| 9. | 178-6598 M | [1] | BOLT (M12X1.25X135-MM) | |
| 10. | 178-6600 | [1] | PULLER | |
| 11. | 178-6599 | [1] | WASHER | |
| 12. | 178-6601 | [1] | RING | |
| M | METRIC PART | |||
#SEBP36260026
162-6256: MOUNTING GP-ENGINE
162-6256 MOUNTING GP-ENGINE
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 205-6813 INSTALLATION AR-ENGINE
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 205-6813 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-9785 | [2] | BRACKET-FRONT | |
| 2. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 3. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| 4. | 118-9784 | [2] | BRACKET-REAR | |
| 5. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 6. | 8T-4123 | [8] | WASHER (3.62X5.75X0.375-MM THK) | |
| 7. | 7X-2532 M | [4] | BOLT (M20X2.5X130-MM) | |
| 8. | 109-9329 | [4] | WASHER (21.5X120X8-MM THK) | |
| 9. | 118-9930 | [4] | SUPPORT AS | |
| 8T-4131 M | [1] | NUT (M20X2.5-THD) | ||
| 10. | 109-9369 | [4] | MOUNT-FLEXIBLE | |
| 11. | 109-9350 | [4] | MOUNT-FLEXIBLE | |
| M | METRIC PART | |||
#SEBP36260027
125-2963: MOUNTING GP-STARTING MOTOR
125-2963 MOUNTING GP-STARTING MOTOR
S/N 7JK1-UP
PART OF 205-6743 ENGINE AR
S/N 7JK1-UP
PART OF 205-6743 ENGINE AR
For full view, you need register
#SEBP36260028
212-8649: PAN GP-OIL
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 183-8262 | [1] | PAN (OIL) | |
| 2. | 5I-8015 | [1] | VALVE AS-FLUID SAMPLING (OIL SAMPLING) | |
| 2A. | 5I-8067 | [1] | WASHER-SEALING | |
| 2B. | 176-4979 | [1] | VALVE (OIL SAMPLING) | |
| 3. | 5I-5607 | [1] | PLUG-DRAIN (ENGINE OIL PAN)(DRAIN-OIL PAN) | |
| 4. | 213-0677 | [1] | SWITCH AS-LIQUID LEVEL | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 135-2402 | [1] | GAUGE (DIPSTICK) | |
| 6. | 178-6542 | [1] | GUIDE (DIPSTICK) | |
| 7. | 5I-4993 | [1] | SEAL | |
| 8. | 8T-7547 M | [38] | BOLT (M8X1.25X30-MM) | |
| 9. | 5I-7666 | [1] | GASKET | |
| 10. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 11. | 3B-4505 | [39] | LOCKWASHER | |
| 12. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 13. | 125-2968 | [1] | SEAL | |
| 14. | 095-2040 | [1] | WASHER | |
| M | METRIC PART | |||
#SEBP36260029
212-8548: PISTON & ROD GP
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6543 BJ | [6] | SET-PISTON RING (STANDARD) | |
| 178-6544 BJ | [6] | SET-PISTON RING (0.25-MM OS) | ||
| 178-6545 BJ | [6] | SET-PISTON RING (0.5-MM OS) | ||
| 2. | 297-7750 B | [6] | PISTON (STANDARD) | |
| 297-7754 B | [6] | PISTON (0.25MM OS) | ||
| 297-7755 B | [6] | PISTON (0.50MM OS) | ||
| 3. | 094-7134 | [6] | PIN | |
| 4. | 5I-7667 | [12] | RING | |
| 5. | 5I-7668 | [6] | ROD AS | |
| (EACH INCLUDES) | ||||
| 6. | 5I-7539 | [1] | BUSHING | |
| 7. | 094-7154 | [2] | BOLT (M12X1.25X85-MM) | |
| 8. | 094-7516 | [2] | NUT (M12X1.25-THD) | |
| 9. | 5I-7637 | [12] | BEARING | |
| 5I-7794 B | [12] | BEARING (0.25-MM US) | ||
| 5I-7795 B | [12] | BEARING (0.5-MM US) | ||
| 5I-7796 B | [12] | BEARING (0.75-MM US) | ||
| B | USE AS REQUIRED | |||
| J | INCLUDES A COMPLETE SET OF RINGS FOR ONE PISTON | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
Information:
Caterpillar Parts SIS Catalog 320C :
Truck sale:
288,000
287,325
287,325