HYDRAULIC SYSTEM
HYDRAULIC GPOPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-AUXILIARYHYDRAULIC SYSTEM
HYDRAULIC GP#SEBP36260370
206-3311: HYDRAULIC AR
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 173-4941 Y | [1] | LINES GP-FRONT | ||
| 142-7736 Y | [1] | LINES GP-PILOT | ||
| 142-7737 Y | [1] | LINES GP-PILOT | ||
| 142-7735 Y | [1] | LINES GP-PUMP | ||
| 207-6589 Y | [1] | LINES GP-RETURN & FILTER | ||
| 173-4940 Y | [1] | LINES GP-SWING MOTOR | ||
| 142-7733 Y | [1] | LINES GP-TRAVEL MOTOR (LONG NARROW UNDERCARRIAGE) | ||
| 142-7668 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 162-6176 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 142-7674 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 158-8200 Y | [1] | VALVE GP-MAIN CONTROL | ||
| S/N JTG1-467 | ||||
| 231-6880 Y | [1] | VALVE GP-MAIN CONTROL | ||
| S/N JTG468-UP | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36260371
217-5076: HYDRAULIC AR
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 188-9236 Y | [1] | LINES GP-FILTER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36260372
161-3752: LEVER GP-CONTROL
161-3752 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 239-7784 CAB AR, 188-7305, 234-8279, 234-8288 OPERATOR AR
ALSO AN ATTACHMENT
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 239-7784 CAB AR, 188-7305, 234-8279, 234-8288 OPERATOR AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS#SEBP36260373
167-7080: LEVER GP-CONTROL
167-7080 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 161-3752 LEVER GP-CONTROL
ALSO AN ATTACHMENT
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 161-3752 LEVER GP-CONTROL
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-5504 | [1] | PLATE AS | |
| 2. | 178-5509 | [1] | BOX AS | |
| 3. | 178-5517 | [1] | SPRING | |
| 4. | 178-5518 | [2] | BUSHING | |
| 5. | 178-5528 | [1] | KNOB | |
| 6. | 178-5649 | [2] | SPACER (8X12X15-MM THK) | |
| 7. | 178-5651 | [2] | STOP | |
| 8. | 196-1703 | [1] | LEVER AS | |
| 9. | 096-5962 | [2] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 10. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| 11. | 163-6785 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 5P-5998 J | [1] | TUBE (3-DM) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 11A. | [1] | GROMMET | ||
| 11B. | 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 12. | 5D-4822 | [2] | RING-RETAINING | |
| 13. | 3S-2093 | [2] | STRAP-CABLE | |
| 14. | 9X-6032 M | [1] | BOLT-SOCKET HEAD (M10X1.5X30-MM) | |
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
#SEBP36260374
142-9664: LINES GP-AUXILIARY HYDRAULIC
142-9664 LINES GP-AUXILIARY HYDRAULIC
S/N GLA1-UP; DBG1-UP; JTG1-UP
STRAIGHT BOOMS
AN ATTACHMENT
S/N GLA1-UP; DBG1-UP; JTG1-UP
STRAIGHT BOOMS
AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 143-5828 | [1] | TUBE AS | |
| 2. | 143-5829 | [1] | TUBE AS | |
| 3. | 116-9191 | [1] | TUBE AS | |
| 4. | 116-9190 | [1] | TUBE AS | |
| 5. | 121-1769 I | [1] | HOSE AS | |
| 6. | 127-6859 I | [1] | HOSE AS | |
| 7. | 1P-5767 | [4] | FLANGE-HALF | |
| 8. | 6V-8635 | [1] | CONNECTOR | |
| 9. | 7Y-3732 | [8] | CLIP | |
| 10. | 124-0909 | [8] | CLIP | |
| 11. | 3V-9744 | [3] | SPACER | |
| 12. | 121-1674 | [3] | PLATE | |
| 13. | 121-1677 | [3] | PLATE | |
| 14. | 121-1946 | [3] | PLATE | |
| 15. | 127-6817 | [1] | PLATE | |
| 16. | 127-6816 | [1] | PLATE | |
| 17. | 7X-2554 M | [12] | BOLT (M16X2X70-MM) | |
| 18. | 7X-2555 M | [6] | BOLT (M16X2X80-MM) | |
| 19. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 20. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 21. | 8T-4648 M | [6] | BOLT (M12X1.75X70-MM) | |
| 22. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 23. | 8T-7338 M | [6] | BOLT (M16X2X45-MM) | |
| 24. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 25. | 9X-8257 | [24] | WASHER (17.5X30X3.5-MM THK) | |
| 26. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 27. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 28. | 5K-9090 | [4] | SEAL-O-RING | |
| 29. | 7M-8485 | [1] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP36260375
153-8793: LINES GP-AUXILIARY HYDRAULIC
153-8793 LINES GP-AUXILIARY HYDRAULIC -REACH BOOM
S/N GLA1-UP; DBG1-UP; JTG1-UP
HIGH PRESSURE
AN ATTACHMENT
S/N GLA1-UP; DBG1-UP; JTG1-UP
HIGH PRESSURE
AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 226-3057 | [1] | LINES GP-BOOM | |
| 1A. | 153-8795 | [1] | TUBE AS | |
| 1B. | 202-7129 | [1] | TUBE AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 2. | 226-3055 | [1] | TUBE GP | |
| 2A. | 153-8797 | [1] | TUBE AS | |
| 2B. | 173-8031 | [1] | TUBE AS | |
| 1P-3705 | [1] | SEAL-RECTANGULAR | ||
| 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | ||
| 3. | 216-6585 I | [1] | HOSE AS | |
| 4. | 216-6589 I | [1] | HOSE AS | |
| 5. | 153-8798 | [2] | PLATE | |
| 6. | 5K-9090 | [2] | SEAL-O-RING | |
| 7. | 7Y-4538 | [6] | CLAMP-HALF | |
| 8. | 173-7916 | [6] | CLAMP-HALF | |
| 9. | 8T-4184 M | [14] | BOLT (M12X1.75X45-MM) | |
| 10. | 8T-4139 M | [10] | BOLT (M12X1.75X30-MM) | |
| 11. | 8T-4223 | [26] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4194 M | [2] | BOLT (M12X1.75X50-MM) | |
| 13. | 173-7995 | [1] | PLATE | |
| 14. | 1P-5767 | [4] | FLANGE-HALF | |
| 15. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 16. | 138-5708 | [2] | CLIP-HALF | |
| 17. | 124-1107 | [1] | GROMMET | |
| 18. | 124-1108 | [2] | CLIP | |
| 19. | 129-5874 | [1] | GROMMET | |
| 20. | 7X-2553 M | [2] | BOLT (M16X2X40-MM) | |
| 21. | 9X-8257 | [2] | WASHER (17.5X30X3.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP36260376
153-8828: LINES GP-AUXILIARY HYDRAULIC
153-8828 LINES GP-AUXILIARY HYDRAULIC
S/N GLA1-UP; DBG1-UP; JTG1-UP
REACH BOOM, MEDIUM PRESSURE
AN ATTACHMENT
S/N GLA1-UP; DBG1-UP; JTG1-UP
REACH BOOM, MEDIUM PRESSURE
AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 202-7130 | [1] | TUBE AS | |
| 2. | 226-3059 | [1] | LINES GP-BOOM | |
| 3. | 226-3061 | [1] | LINES GP-BOOM | |
| 4. | 202-7131 | [1] | TUBE AS | |
| 5. | 6V-8398 | [4] | SEAL-O-RING | |
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 153-8839 | [1] | PLATE | |
| 8. | 173-7997 | [2] | SUPPORT AS | |
| 9. | 173-7971 | [2] | CLIP | |
| 10. | 149-1738 | [4] | CLIP | |
| 11. | 7Y-4868 | [2] | CLIP | |
| 12. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 13. | 093-1291 | [2] | CLAMP | |
| 14. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| 15. | 8T-4223 | [14] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 7J-9108 | [2] | SEAL-O-RING | |
| 17. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 18. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 19. | 096-5766 | [2] | CLAMP | |
| 20. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 21. | 153-8867 | [2] | CLIP | |
| 22. | 8T-4185 M | [3] | BOLT (M10X1.5X50-MM) | |
| 23. | 085-8091 M | [1] | BOLT (M10X1.5X55-MM) | |
| M | METRIC PART | |||
#SEBP36260377
167-3786: LINES GP-AUXILIARY HYDRAULIC
167-3786 LINES GP-AUXILIARY HYDRAULIC -STICK, MEDIUM PRESSURE
S/N GLA1-UP; DBG1-UP; JTG1-UP
FOR USE WITH 3.9-M (12.8-FT) STICK
AN ATTACHMENT
S/N GLA1-UP; DBG1-UP; JTG1-UP
FOR USE WITH 3.9-M (12.8-FT) STICK
AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-7992 Y | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF) | |
| 2. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 3. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| 4. | 142-6583 | [1] | TUBE AS | |
| 5. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 6. | 121-1903 | [1] | TUBE AS | |
| 7. | 1P-3703 | [2] | SEAL-RECTANGULAR | |
| 8. | 124-0909 | [4] | CLIP | |
| 9. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 10. | 8T-4140 M | [4] | BOLT (M16X2X60-MM) | |
| 11. | 7Y-3732 | [4] | CLIP | |
| 12. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 154-4103 I | [1] | HOSE AS | |
| 15. | 167-6743 I | [1] | HOSE AS | |
| 16. | 8T-4194 M | [12] | BOLT (M12X1.75X50-MM) | |
| 17. | 1P-5767 | [4] | FLANGE-HALF | |
| 18. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 19. | 6V-0400 | [2] | FLANGE-HALF | |
| 20. | 5K-9090 | [1] | SEAL-O-RING | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP36260378
173-7951: LINES GP-AUXILIARY HYDRAULIC
173-7951 LINES GP-AUXILIARY HYDRAULIC
S/N GLA1-UP; DBG1-UP; JTG1-UP
MASS BOOM, MEDIUM PRESSURE
Type 1
FOR USE WITH @@@@@173-7959@@@@@, @@@@@173-7952@@@@@
AN ATTACHMENT
S/N GLA1-UP; DBG1-UP; JTG1-UP
MASS BOOM, MEDIUM PRESSURE
Type 1
FOR USE WITH @@@@@173-7959@@@@@, @@@@@173-7952@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 202-7135 | [1] | TUBE AS | |
| 2. | 179-5008 | [1] | TUBE AS | |
| 3. | 179-5009 | [1] | TUBE AS | |
| 4. | 179-5016 | [1] | TUBE AS | |
| 5. | 179-5017 | [1] | TUBE AS | |
| 6. | 179-5012 | [1] | CLIP AS | |
| 7. | 6V-8398 | [6] | SEAL-O-RING | |
| 8. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 9. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 153-8839 | [1] | PLATE | |
| 11. | 173-7997 | [2] | SUPPORT AS | |
| 12. | 173-7971 | [1] | CLIP | |
| 13. | 149-1738 | [6] | CLIP | |
| 14. | 7Y-4868 | [2] | CLIP | |
| 15. | 8T-4139 M | [10] | BOLT (M12X1.75X30-MM) | |
| 16. | 093-1291 | [1] | CLAMP | |
| 17. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| 18. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 4I-8888 | [4] | SEAL-RECTANGULAR | |
| 20. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 21. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 22. | 085-8091 M | [1] | BOLT (M10X1.5X55-MM) | |
| 23. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 24. | 202-7136 | [1] | TUBE AS | |
| 25. | 153-8867 | [2] | CLIP | |
| 26. | 096-5766 | [2] | CLAMP | |
| 27. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 28. | 9C-7543 I | [1] | HOSE AS | |
| 29. | 8W-5171 I | [1] | HOSE AS | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP36260379
173-7951: LINES GP-AUXILIARY HYDRAULIC
173-7951 LINES GP-AUXILIARY HYDRAULIC
S/N GLA1-UP; DBG1-UP; JTG1-UP
MASS BOOM, MEDIUM PRESSURE
Type 2
FOR USE WITH @@@@@173-7959@@@@@, @@@@@173-7952@@@@@
AN ATTACHMENT
S/N GLA1-UP; DBG1-UP; JTG1-UP
MASS BOOM, MEDIUM PRESSURE
Type 2
FOR USE WITH @@@@@173-7959@@@@@, @@@@@173-7952@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your 320C EXCAVATOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 202-7135 | [1] | TUBE AS | |
| 2. | 226-3069 C | [1] | LINES GP-BOOM | |
| 3. | 226-3071 C | [1] | LINES GP-BOOM | |
| 4. | 179-5012 | [1] | CLIP AS | |
| 5. | 6V-8398 | [6] | SEAL-O-RING | |
| 6. | 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | |
| 7. | 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 153-8839 | [1] | PLATE | |
| 9. | 173-7997 | [2] | SUPPORT AS | |
| 10. | 173-7971 | [1] | CLIP | |
| 11. | 149-1738 | [6] | CLIP | |
| 12. | 7Y-4868 | [2] | CLIP | |
| 13. | 8T-4139 M | [10] | BOLT (M12X1.75X30-MM) | |
| 14. | 093-1291 | [1] | CLAMP | |
| 15. | 8T-6868 M | [2] | BOLT (M12X1.75X80-MM) | |
| 16. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 7J-9108 C | [2] | SEAL-O-RING | |
| 18. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 19. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 20. | 085-8091 M | [1] | BOLT (M10X1.5X55-MM) | |
| 21. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 22. | 202-7136 | [1] | TUBE AS | |
| 23. | 153-8867 | [2] | CLIP | |
| 24. | 096-5766 | [2] | CLAMP | |
| 25. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 26. | 9C-7543 I | [1] | HOSE AS | |
| 27. | 8W-5171 I | [1] | HOSE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
Information:
Caterpillar Parts SIS Catalog 320C :
Truck sale:
288,000
287,325
287,325