AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

244-8483 PUMP GP-MAIN HYDRAULIC S/N GLA1672-UP; DBG555-UP; JTG864-UP PART OF 244-8491 PUMP & MTG GP-HYDRAULIC, 162-6176 PUMP & MTG GP-MAIN HYDRAULIC ALSO AN ATTACHMENT 320C


HYDRAULIC SYSTEM
PUMP GP
FILTER GP
SWIVEL GP
TANK GP
VALVE GP-CONTROL

EXCAVATOR 320C EXCAVATOR DBG
 320C, 320C L, 320C LN Excavators DBG00001-UP (MACHINE) POWERED BY 3066 Engine SEBP3626 320C DBG   (2001)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-MAIN HYDRAULIC
200-3366 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
200-3376 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
244-8483 PUMP GP-MAIN HYDRAULIC
 

#SEBP36260580
 

244-8483: PUMP GP-MAIN HYDRAULIC

244-8483 PUMP GP-MAIN HYDRAULIC
S/N GLA1672-UP; DBG555-UP; JTG864-UP
PART OF 244-8491 PUMP & MTG GP-HYDRAULIC, 162-6176 PUMP & MTG GP-MAIN HYDRAULIC
ALSO AN ATTACHMENT
i02195551 SEBP3626
2448483 PUMP GP-MAIN HYDRAULIC Parts scheme 2448483 PUMP GP-MAIN HYDRAULIC Parts scheme 2448483 PUMP GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-1022 [2] ORIFICE  
2. 7Y-4215 [2] SPACER  
3. 096-3983 [1] RING-RETAINING  
4. 118-4057 [18] SPRING  
5. 126-2016 J [1] PUMP GP-GEAR (PILOT)  
5A. 9T-0835 [1] RING-RETAINING  
6. 129-7854 [1] CASE  
7. 129-7855 [1] GASKET  
8. 129-7857 [1] GASKET  
9. 129-7859 [2] SET-BEARING  
10. 129-7863 [1] COVER  
11. 129-7921 [2] RING-RETAINING  
12. 129-7925 [1] SEAL-LIP TYPE  
13. 129-7927 [2] BEARING  
14. 129-7979 [4] DOWEL  
15. 150-5782 [2] COVER  
16. 173-3391 [1] SHAFT-DRIVE  
17. 173-3427 [2] GUIDE-BALL  
18. 173-3473 [2] PLATE  
19. 173-3496 [1] BARREL AS  
20. 173-3498 [1] BARREL AS  
21. 177-2470 [1] COVER  
22. 177-2471 [1] COVER  
23. 273-8314 [1] SEAL-O-RING  
24. 179-9763 [1] FLANGE  
25. 191-5709 [2] PISTON AS  
26. 192-0573 [4] PIN-DOWEL  
27. 200-3333 [1] HEAD-PUMP  
28. 200-3334 [1] COVER  
29. 200-3368 [1] SHAFT  
30. 204-2683 Y [1] ACTUATOR GP-PUMP (DRIVE)  
31. 204-2684 Y [1] ACTUATOR GP-PUMP (DRIVEN)  
32. 242-6801 [2] SWASHPLATE AS  
    (EACH INCLUDES)
32A. 094-1875 [1] DOWEL  
32B. 173-3428 [1] BUSHING  
32C. 242-6803 [2] PIN-DOWEL  
33. 242-6804 [4] BEARING  
34. 9S-4185 [2] PLUG (3/4-16-THD)  
35. 247-8782 [1] BODY  
36. 247-8920 [2] ORIFICE  
37. 094-1875 [6] DOWEL  
38. 094-1882 [16] PLUG  
39. 095-0946 [2] RING-RETAINING  
40. 8T-4196 M [2] BOLT (M10X1.5X35-MM)  
41. 096-3944 [1] SEAL-O-RING  
42. 189-9763 [8] SEAL-O-RING  
43. 190-4896 [2] PLUG  
44. 193-1736 [4] SEAL-O-RING  
45. 3K-0360 [2] SEAL-O-RING  
46. 7M-8485 [2] SEAL-O-RING  
47. 7X-2557 M [1] BOLT (M16X2X140-MM)  
48. 8J-4645 [2] PLUG (STRAIGHT THREAD O-RING)  
49. 273-8315 [2] SEAL-O-RING  
50. 8T-4136 M [18] BOLT (M10X1.5X25-MM)  
51. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
52. 8T-4139 M [10] BOLT (M12X1.75X30-MM)  
53. 8T-4140 M [4] BOLT (M16X2X60-MM)  
54. 8T-4175 M [2] BOLT (M16X2X90-MM)  
55. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
56. 8T-4192 M [10] BOLT (M12X1.75X25-MM)  
   
    AVAILABLE REPAIR KIT(S):
  250-2503 J [1] KIT-SEAL (PILOT GEAR PUMP)  
    (INCLUDES 2 GASKETS, LIP SEAL, SEAL & RETAINING RING)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36260581
 

158-8988: SCREEN GP-HYDRAULIC

158-8988 SCREEN GP-HYDRAULIC -TANK
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 142-7675 TANK & FILTER GP-HYDRAULIC
FIELD REPLACEMENT ORDER @@@@@259-0922@@@@@
i01234445 SEBP3626
1588988 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-6641 [1] GUIDE  
2. 209-6000 [1] SCREEN AS (HYDRAULIC TANK)  
3. 095-6639 [1] SPRING  
4. 129-7784 [1] ROD  
5. 5H-5672 [1] SEAL-O-RING  
6. 8T-4133 M [2] NUT (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP36260582
 

259-0922: SCREEN GP-HYDRAULIC

259-0922 SCREEN GP-HYDRAULIC -TANK
S/N GLA2220-UP; DBG687-UP; JTG1-UP
PART OF 142-7675 TANK & FILTER GP-HYDRAULIC
FIELD REPLACEMENT FOR @@@@@158-8988@@@@@
i02387123 SEBP3626
2590922 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 209-6000 [1] SCREEN AS (HYDRAULIC TANK)  
2. 259-0918 [1] GUIDE  
3. 095-6639 [1] SPRING  
4. 129-7784 [1] ROD  
5. 5H-5672 [1] SEAL-O-RING  
6. 8T-4133 M [2] NUT (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP36260583
 

159-7841: SWIVEL GP

159-7841 SWIVEL GP
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 142-7731 LINES GP-HYDRAULIC, 211-5135 LINES GP-TRACK TENSION, 142-7732, 142-7733 LINES GP-TRAVEL MOTOR
ALSO AN ATTACHMENT
i01203392 SEBP3626
1597841 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
2. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
3. 7Y-4817 [1] COVER  
4. 095-1716 [1] SEAL-O-RING  
5. 7I-7131 [1] RETAINER  
6. 7Y-4801 [1] HOUSING  
7. 159-7782 [5] SEAL  
8. 095-1625 [3] SEAL-O-RING  
9. 4I-6262 [1] ROTOR GP-SWIVEL  
10. 8T-6759 [1] PLUG-PIPE  
  M   METRIC PART
 

#SEBP36260584
 

142-7675: TANK & FILTER GP-HYDRAULIC

142-7675 TANK & FILTER GP-HYDRAULIC
S/N GLA1-2219; DBG1-686; JTG1-UP
PART OF 142-7674 TANK & MTG GP-HYDRAULIC
Type 1
i02755151 SEBP3626
1427675 TANK & FILTER GP-HYDRAULIC Parts scheme 1427675 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-3624 [1] PLUG AS  
2. 158-8988 Y [1] SCREEN GP-HYDRAULIC  
3. 165-3254 [1] COVER AS  
4. 165-3256 [1] PIPE AS  
5. 173-4865 [1] SUPPORT AS  
6. 173-4866 [1] HOSE  
7. 199-4830 [1] PIPE AS  
8. 094-3245 [1] GAUGE GP-SIGHT  
8A. 7Y-4754 [2] BLOCK  
8B. 094-3247 M [2] BOLT (M10X1.5X36-MM)  
8C. 095-1514 [4] SEAL-O-RING  
8D. 095-1517 [4] SEAL-O-RING  
8F. 096-4754 [1] PIPE  
9. 095-1608 [1] SEAL-O-RING  
10. 095-1735 [1] SEAL-O-RING  
11. 105-2652 [1] PLUG  
12. 112-0065 [1] BRACKET  
13. 126-2075 Y [1] FILTER GP-OIL  
14. 158-8987 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
15. 188-4140 CY [1] FILTER GP-OIL (HYDRAULIC RETURN)  
16. 164-5590 [1] VALVE AS-FLUID SAMPLING  
17. 168-9689 [1] TANK AS-HYDRAULIC  
17A. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
18. 170-9376 [1] SWITCH AS-LIQUID LEVEL (OIL LEVEL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
19. 1P-4278 [1] CLAMP-HOSE  
20. 2B-0858 [1] PLUG-PIPE  
21. 3D-2824 [1] SEAL-O-RING  
22. 3J-1907 [1] SEAL-O-RING  
23. 3K-0360 [1] SEAL-O-RING  
24. 4B-7739 [1] PLUG-DRAIN  
25. 4I-3745 [1] CAP-PRESSURE  
26. 4I-5394 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
  4I-5490 M [2] SCREW-MACHINE (M4X0.7X6-MM)  
  095-0826 [2] LOCKWASHER  
27. 4J-5267 [1] SEAL-O-RING  
28. 6C-8496 [1] WASHER (46X60.5X1.5-MM THK)  
29. 6D-9157 [1] SEAL-O-RING  
30. 6J-2680 [2] SEAL-O-RING  
31. 6V-0852 [1] CAP-DUST  
32. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
33. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
34. 8H-9819 [1] ADAPTER-PLUG  
35. 8M-2770 [2] CLIP (LOOP)  
36. 8T-0267 M [2] BOLT-SOCKET HEAD (M6X1X12-MM)  
37. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [2] NUT (M10X1.5-THD)  
39. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
41. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
45. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
46. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36260585
 

142-7675: TANK & FILTER GP-HYDRAULIC

142-7675 TANK & FILTER GP-HYDRAULIC
S/N GLA1-2219; DBG1-686; JTG1-UP
PART OF 142-7674 TANK & MTG GP-HYDRAULIC
Type 2
i02755152 SEBP3626
1427675 TANK & FILTER GP-HYDRAULIC Parts scheme 1427675 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-3624 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
2. 158-8988 Y [1] SCREEN GP-HYDRAULIC  
3. 165-3254 [1] COVER AS  
4. 165-3256 [1] PIPE AS  
5. 173-4865 [1] SUPPORT AS  
6. 199-4830 [1] PIPE AS  
7. 213-0677 [1] SWITCH AS-LIQUID LEVEL (HYDRAULIC OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  144-1636 [2] PIN-CONNECTOR (14-GA TO 18-GA)  
8. 227-0620 CY [1] GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL)  
9. 7Y-1976 [1] HOSE-WATER  
10. 207-6403 [1] PLUG  
11. 207-6404 [1] WASHER (49.5X60.5X1.5-MM THK)  
12. 095-1608 [1] SEAL-O-RING  
13. 095-1735 [1] SEAL-O-RING  
14. 112-0065 [1] BRACKET  
15. 126-2075 Y [1] FILTER GP-OIL (HYDRAULIC)  
16. 158-8987 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
17. 164-5590 [1] VALVE AS-FLUID SAMPLING  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
18. 168-9689 [1] TANK AS-HYDRAULIC  
18A. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
19. 188-4140 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
20. 1P-4278 [1] CLAMP-HOSE  
21. 2B-0858 [1] PLUG-PIPE  
22. 3D-2824 [1] SEAL-O-RING  
23. 3J-1907 [1] SEAL-O-RING  
24. 3K-0360 [1] SEAL-O-RING  
25. 4B-7739 [1] PLUG-DRAIN  
26. 4I-3745 [1] CAP-PRESSURE  
27. 4I-5394 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
  4I-5490 M [2] SCREW-MACHINE (M4X0.7X6-MM)  
  095-0826 [2] LOCKWASHER  
28. 4J-5267 [1] SEAL-O-RING  
29. 6D-9157 [1] SEAL-O-RING  
30. 6J-2680 [2] SEAL-O-RING  
31. 6V-0852 [1] CAP-DUST  
32. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
33. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
34. 8H-9819 [1] ADAPTER-PLUG  
35. 8M-2770 [2] CLIP (LOOP)  
36. 8T-0267 M [2] BOLT-SOCKET HEAD (M6X1X12-MM)  
37. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [2] NUT (M10X1.5-THD)  
39. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
41. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
45. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
46. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36260586
 

142-7675: TANK & FILTER GP-HYDRAULIC

142-7675 TANK & FILTER GP-HYDRAULIC
S/N GLA2220-UP; DBG687-UP
PART OF 142-7674 TANK & MTG GP-HYDRAULIC
i02608181 SEBP3626
1427675 TANK & FILTER GP-HYDRAULIC Parts scheme 1427675 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-3624 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
2. 259-0922 CY [1] SCREEN GP-HYDRAULIC (TANK)  
3. 265-0064 C [1] COVER AS  
4. 165-3256 [1] PIPE AS  
5. 173-4865 [1] SUPPORT AS  
6. 199-4830 [1] PIPE AS  
7. 213-0677 [1] SWITCH AS-LIQUID LEVEL (HYDRAULIC OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 227-0620 Y [1] GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL)(HYDRAULIC OIL LEVEL)  
9. 7Y-1976 E HOSE-WATER (130-CM)  
10. 207-6403 [1] PLUG  
11. 207-6404 [1] WASHER (49.5X60.5X1.5-MM THK)  
12. 095-1608 [1] SEAL-O-RING  
13. 095-1735 [1] SEAL-O-RING  
14. 112-0065 [1] BRACKET  
15. 126-2075 Y [1] FILTER GP-OIL  
16. 158-8987 Y [1] FILTER & VALVE GP-PILOT (HYDRAULIC OIL)  
17. 164-5590 [1] VALVE AS-FLUID SAMPLING  
  3J-7354 [1] SEAL-O-RING  
  8C-3446 [1] VALVE-SAMPLING  
18. 168-9689 [1] TANK AS-HYDRAULIC  
18A. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
19. 188-4140 Y [1] FILTER GP-OIL (HYDRAULIC RETURN)  
20. 1P-4278 [1] CLAMP-HOSE  
21. 2B-0858 [1] PLUG-PIPE  
22. 3D-2824 [1] SEAL-O-RING  
23. 3J-1907 [1] SEAL-O-RING  
24. 3K-0360 [1] SEAL-O-RING  
25. 4B-7739 [1] PLUG-DRAIN  
26. 4I-3745 [1] CAP-PRESSURE (HYDRAULIC TANK)  
27. 4I-5394 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
  4I-5490 M [2] SCREW-MACHINE (M4X0.7X6-MM)  
  095-0826 [2] LOCKWASHER  
28. 4J-5267 [1] SEAL-O-RING  
29. 6D-9157 [1] SEAL-O-RING  
30. 6J-2680 [2] SEAL-O-RING  
31. 6V-0852 [1] CAP-DUST  
32. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
33. 8C-3451 [1] CAP-DUST (HYDRAULIC OIL)  
34. 8H-9819 [1] ADAPTER-PLUG  
35. 8M-2770 [2] CLIP (LOOP)  
36. 8T-0267 M [2] BOLT-SOCKET HEAD (M6X1X12-MM)  
37. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [2] NUT (M10X1.5-THD)  
39. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
41. 8T-4183 M [2] BOLT (M12X1.75X40-MM)  
42. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
43. 8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
45. 8T-4908 M [4] BOLT (M8X1.25X25-MM)  
46. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36260587
 

142-7674: TANK & MTG GP-HYDRAULIC

142-7674 TANK & MTG GP-HYDRAULIC
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 206-3309, 206-3310, 206-3311 HYDRAULIC AR
i01288449 SEBP3626
1427674 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 142-7675 Y [1] TANK & FILTER GP-HYDRAULIC  
2. 177-5886 [6] SPACER (17X35X87-MM THK)  
3. 8T-4174 M [6] BOLT (M16X2X120-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36260588
 

209-4873: VALVE & MTG GP-MAIN CONTROL

209-4873 VALVE & MTG GP-MAIN CONTROL
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 254-5441 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
i02221318 SEBP3626
2094873 VALVE & MTG GP-MAIN CONTROL Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-0146 Y [1] VALVE GP-CONTROL (AUXILIARY)(AUXILIARY)  
2. 7X-2475 M [5] BOLT (M16X2X130-MM)  
3. 231-6880 Y [1] VALVE GP-MAIN CONTROL  
4. 1P-3702 [2] SEAL-RECTANGULAR  
5. 4J-8998 [2] SEAL-O-RING  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36260589
 

209-4873: VALVE & MTG GP-MAIN CONTROL

209-4873 VALVE & MTG GP-MAIN CONTROL
S/N GLA1-UP; DBG1-UP; JTG1-UP
PART OF 254-5441 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
i02411950 SEBP3626
2094873 VALVE & MTG GP-MAIN CONTROL Parts scheme
  For full view, you need register

Parts for your 320C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 171-0146 Y [1] VALVE GP-CONTROL (AUXILIARY)(AUXILIARY)  
2. 7X-2475 M [5] BOLT (M16X2X130-MM)  
3. 250-2586 CY [1] VALVE GP-MAIN CONTROL  
4. 1P-3702 [2] SEAL-RECTANGULAR  
5. 4J-8998 [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 320C :

PUMP GP-MAIN HYDRAULIC
200-3376 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
200-3366 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
200-3366 PUMP GP-MAIN HYDRAULIC
PUMP GP-GEAR
448-3702 PUMP GP-GEAR
PUMP GP-GEAR
349-4087 PUMP GP-GEAR
PUMP GP-GEAR
240-2998 PUMP GP-GEAR
PUMP GP-GEAR
209-6057 PUMP GP-GEAR
PUMP & MTG GP-MAIN HYDRAULIC
162-6176 PUMP & MTG GP-MAIN HYDRAULIC
SCREEN GP-HYDRAULIC
158-8988 SCREEN GP-HYDRAULIC
SCREEN GP-HYDRAULIC
259-0922 SCREEN GP-HYDRAULIC
SWIVEL GP
159-7841 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
142-7675 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
142-7675 TANK & FILTER GP-HYDRAULIC
TANK & FILTER GP-HYDRAULIC
142-7675 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
142-7674 TANK & MTG GP-HYDRAULIC
VALVE & MTG GP-MAIN CONTROL
209-4873 VALVE & MTG GP-MAIN CONTROL

Truck sale:

 
 
Caterpillar 320C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
288,000 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 320C, Crawler Excavators, Construction
45,597 
Caterpillar 320C, Crawler Excavators, Construction
- Crawler Excavators
FINNING CANADA
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
287,325 
Caterpillar 320 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.