AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

223-1471 CYLINDER & LINES GP-BOOM -LH S/N S2C1-UP BOOM LOWERING CONTROL PART OF 234-3403 FRONT AR-MATERIAL HANDLER, 211-1673 LINKAGE AR-MATERIAL HANDLER Type 1 AN ATTACHMENT 325C


HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP

EXCAVATOR 325C EXCAVATOR S2C
 325C Material Handler S2C00001-UP (MACHINE) POWERED BY 3126 Engine SEBP3627 325C S2C   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & LINES GP-BOOM
223-1471 CYLINDER & LINES GP-BOOM
CYLINDER & LINES GP-BOOM
223-1471 CYLINDER & LINES GP-BOOM
CYLINDER & LINES GP-BOOM
223-1472 CYLINDER & LINES GP-BOOM
CYLINDER & LINES GP-BOOM
223-1472 CYLINDER & LINES GP-BOOM
CYLINDER & SEAL GP-BOOM
203-3927 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-STICK
213-8200 CYLINDER & SEAL GP-STICK
CYLINDER GP-BOOM
203-3906 CYLINDER GP-BOOM
CYLINDER GP-STICK
214-1591 CYLINDER GP-STICK
GUARD GP-CYLINDER
207-4558 GUARD GP-CYLINDER
 

#SEBP36270300
 

223-1471: CYLINDER & LINES GP-BOOM

223-1471 CYLINDER & LINES GP-BOOM -LH
S/N S2C1-UP
BOOM LOWERING CONTROL
PART OF 234-3403 FRONT AR-MATERIAL HANDLER, 211-1673 LINKAGE AR-MATERIAL HANDLER
Type 1
AN ATTACHMENT
i01795191 SEBP3627
2231471 CYLINDER & LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-8856 [1] SUPPORT AS  
2. 236-2759 [1] HOSE AS  
3. 196-8731 Y [1] VALVE GP-LOAD CONTROL (BOOM CYLINDER)  
4. 203-3927 Y [1] CYLINDER & SEAL GP-BOOM  
5. 205-7359 [1] SUPPORT AS  
6. 224-7462 [1] TUBE AS  
7. 224-7463 [1] TUBE AS  
8. 148-8341 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8713 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
9. 1P-3704 [2] SEAL-RECTANGULAR  
10. 4I-1674 [2] CLIP  
11. 5P-7465 [1] CLIP (TAB)  
12. 8T-2920 [1] GROMMET (27-MM ID)  
13. 6V-9746 [2] SEAL-O-RING  
14. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
16. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 5P-7464 [1] CLIP (SLOT)  
18. 8T-4910 M [12] BOLT (M12X1.75X60-MM)  
19. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36270301
 

223-1471: CYLINDER & LINES GP-BOOM

223-1471 CYLINDER & LINES GP-BOOM -LH
S/N S2C1-UP
BOOM LOWERING CONTROL
PART OF 234-3403 FRONT AR-MATERIAL HANDLER, 211-1673 LINKAGE AR-MATERIAL HANDLER
Type 2
AN ATTACHMENT
i02694017 SEBP3627
2231471 CYLINDER & LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-8856 [1] SUPPORT AS  
2. 236-2759 [1] HOSE AS  
3. 263-9982 CY [1] VALVE GP-LOAD CONTROL (BOOM CYLINDER)  
4. 203-3927 Y [1] CYLINDER & SEAL GP-BOOM  
5. 205-7359 [1] SUPPORT AS  
6. 224-7462 [1] TUBE AS  
7. 224-7463 [1] TUBE AS  
8. 148-8341 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8713 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
9. 1P-3704 [2] SEAL-RECTANGULAR  
10. 4I-1674 [2] CLIP  
11. 5P-7465 [1] CLIP (TAB)  
12. 8T-2920 [1] GROMMET (27-MM ID)  
13. 6V-9746 [2] SEAL-O-RING  
14. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
16. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 5P-7464 [1] CLIP (SLOT)  
18. 8T-4910 M [12] BOLT (M12X1.75X60-MM)  
19. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36270302
 

223-1472: CYLINDER & LINES GP-BOOM

223-1472 CYLINDER & LINES GP-BOOM -RH
S/N S2C1-UP
BOOM LOWERING CONTROL
PART OF 234-3403 FRONT AR-MATERIAL HANDLER, 211-1673 LINKAGE AR-MATERIAL HANDLER
Type 1
AN ATTACHMENT
i01795194 SEBP3627
2231472 CYLINDER & LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-8856 [1] SUPPORT AS  
2. 236-2759 [1] HOSE AS  
3. 196-8731 Y [1] VALVE GP-LOAD CONTROL (BOOM CYLINDER)  
4. 203-3927 Y [1] CYLINDER & SEAL GP-BOOM  
5. 205-7359 [1] SUPPORT AS  
6. 224-7464 [1] TUBE AS  
7. 224-7465 [1] TUBE AS  
8. 148-8341 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8713 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
9. 1P-3704 [2] SEAL-RECTANGULAR  
10. 4I-1674 [2] CLIP  
11. 5P-7465 [1] CLIP (TAB)  
12. 8T-2920 [1] GROMMET (27-MM ID)  
13. 6V-9746 [2] SEAL-O-RING  
14. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
16. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 5P-7464 [1] CLIP (SLOT)  
18. 8T-4910 M [12] BOLT (M12X1.75X60-MM)  
19. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36270303
 

223-1472: CYLINDER & LINES GP-BOOM

223-1472 CYLINDER & LINES GP-BOOM -RH
S/N S2C1-UP
BOOM LOWERING CONTROL
PART OF 234-3403 FRONT AR-MATERIAL HANDLER, 211-1673 LINKAGE AR-MATERIAL HANDLER
Type 2
AN ATTACHMENT
i02694022 SEBP3627
2231472 CYLINDER & LINES GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-8856 [1] SUPPORT AS  
2. 236-2759 [1] HOSE AS  
3. 263-9982 CY [1] VALVE GP-LOAD CONTROL (BOOM CYLINDER)  
4. 203-3927 Y [1] CYLINDER & SEAL GP-BOOM  
5. 205-7359 [1] SUPPORT AS  
6. 224-7464 [1] TUBE AS  
7. 224-7465 [1] TUBE AS  
8. 148-8341 [1] CONNECTOR AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8713 [1] CONNECTOR  
  7J-9108 [1] SEAL-O-RING  
9. 1P-3704 [2] SEAL-RECTANGULAR  
10. 4I-1674 [2] CLIP  
11. 5P-7465 [1] CLIP (TAB)  
12. 8T-2920 [1] GROMMET (27-MM ID)  
13. 6V-9746 [2] SEAL-O-RING  
14. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
16. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 5P-7464 [1] CLIP (SLOT)  
18. 8T-4910 M [12] BOLT (M12X1.75X60-MM)  
19. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36270304
 

203-3927: CYLINDER & SEAL GP-BOOM

203-3927 CYLINDER & SEAL GP-BOOM
S/N S2C1-UP
PART OF 223-1471, 223-1472 CYLINDER & LINES GP-BOOM
AN ATTACHMENT
i01707000 SEBP3627
2033927 CYLINDER & SEAL GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-4597 [4] SEAL-LIP TYPE  
2. 203-3906 Y [1] CYLINDER GP-BOOM  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36270305
 

213-8200: CYLINDER & SEAL GP-STICK

213-8200 CYLINDER & SEAL GP-STICK
S/N S2C1-UP
PART OF 234-3403 FRONT AR-MATERIAL HANDLER, 211-1673 LINKAGE AR-MATERIAL HANDLER
AN ATTACHMENT
i01653154 SEBP3627
2138200 CYLINDER & SEAL GP-STICK Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-1591 Y [1] CYLINDER GP-STICK  
2. 9X-4597 [4] SEAL-LIP TYPE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36270306
 

203-3906: CYLINDER GP-BOOM

203-3906 CYLINDER GP-BOOM
S/N S2C1-UP
150MM (5.91IN) BORE X 1350MM (53.15IN) STROKE
PART OF 203-3927 CYLINDER & SEAL GP-BOOM
AN ATTACHMENT
i01706999 SEBP3627
2033906 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-3907 [1] CYLINDER AS  
1A. 103-5348 [1] BUSHING  
2. 7Y-4695 M [1] LOCKNUT (M80X2-THD)  
3. 116-3589 [1] RING  
4. 9X-3601 [1] SEAL AS  
5. 096-1581 [1] RING  
6. 7I-7180 [1] PISTON  
7. 5I-8516 [1] RING-SEAL  
8. 6I-6798 [1] STOP  
9. 095-1633 [1] SEAL-O-RING  
10. 198-2643 [1] RING-BACKUP  
11. 7Y-4672 [1] RING-RETAINING  
12. 203-3909 [1] ROD AS  
12A. 7Y-2397 [1] BUSHING  
13. 7Y-5215 M [8] BOLT-SOCKET HEAD (M24X3X90-MM)  
14. 114-0760 [1] BUSHING  
15. 167-2217 [1] SEAL AS-BUFFER  
16. 167-2332 [1] SEAL-U-CUP  
17. 7Y-4669 [1] RING-BACKUP  
18. 167-2483 [1] SEAL-WIPER  
19. 205-8622 [1] HEAD  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP36270307
 

214-1591: CYLINDER GP-STICK

214-1591 CYLINDER GP-STICK
S/N S2C1-UP
130MM (5.12 IN) BORE X 1210MM (47.64 IN) STROKE
PART OF 213-8200 CYLINDER & SEAL GP-STICK
AN ATTACHMENT
i01660465 SEBP3627
2141591 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-1592 [1] CYLINDER AS  
1A. 228-5617 [1] BUSHING  
2. 7Y-4622 [1] LOCKNUT (SPECIAL)  
3. 118-4019 J [1] RING  
4. 495-8200 J [1] RING AS-SEAL  
5. 7Y-4632 J [1] RING  
6. 7I-7183 [1] PISTON  
7. 7I-1351 [1] STOP  
8. 7I-1352 J [1] RING-SEAL  
9. 095-1631 J [1] SEAL-O-RING  
10. 198-2645 J [1] RING-BACKUP  
11. 7I-1353 [1] HEAD  
12. 7Y-5216 M [8] BOLT-SOCKET HEAD (M20X2.5X80-MM)  
13. 093-1571 [1] RING-RETAINING  
14. 114-0758 J [1] BUSHING  
15. 167-2212 J [1] SEAL AS-BUFFER  
16. 167-2325 J [1] SEAL-U-CUP  
17. 096-1588 J [1] RING-BACKUP  
18. 165-9287 J [1] SEAL-LIP TYPE  
19. 214-1597 [1] ROD AS  
19A. 228-5617 [1] BUSHING  
   
    AVAILABLE REPAIR KIT(S):
  247-0257 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP36270308
 

191-5537: DRIVE GP-AUXILIARY PUMP

191-5537 DRIVE GP-AUXILIARY PUMP
S/N S2C1-UP
PART OF 210-3030 PUMP & MTG GP-AUXILIARY
i01412662 SEBP3627
1915537 DRIVE GP-AUXILIARY PUMP Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-7402 M [8] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
2. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
3. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
4. 191-5601 [2] BEARING  
5. 096-0121 [1] SEAL-O-RING  
6. 191-5541 [1] COVER  
7. 8T-5049 [1] SEAL-O-RING  
8. 177-2585 [1] COVER  
9. 173-3436 [1] COVER  
10. 095-1680 [1] SEAL-O-RING  
11. 9S-4191 [1] PLUG (9/16-18-THD)  
12. 3J-1907 [1] SEAL-O-RING  
13. Z [1] BODY  
14. 099-2096 [2] BALL BEARING  
15. 173-3406 [1] SHAFT  
16. 191-5540 [1] GEAR (39-TEETH)  
17. 191-5539 [1] SHAFT  
18. 129-7857 [1] GASKET  
19. 094-1875 [2] DOWEL  
  M   METRIC PART
  Z   NOT SERVICED SEPARATELY
 

#SEBP36270309
 

191-2693: DRIVE GP-SWING

191-2693 DRIVE GP-SWING -WITHOUT MOTOR
S/N S2C1-UP
PART OF 199-4487, 199-4490 DRIVE GP-SWING
Type 1
i01469111 SEBP3627
1912693 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 325C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-7466 [4] GEAR-PLANETARY (23-TEETH)  
2. 231-6864 [1] BREATHER AS (SWING DRIVE)  
2A. 114-8234 [1] BREATHER (SWING DRIVE)  
2B. 093-5150 [1] COUPLING-PIPE  
2C. 231-6969 [1] NIPPLE-PIPE  
3. 6V-7238 [1] VALVE-SHUTOFF (SWING DRIVE)  
4. 7I-7728 [1] CARRIER-PLANETARY  
5. 7Y-0225 [3] SHAFT-PLANETARY  
6. 7Y-1434 [2] SPACER (40X69.5X6-MM THK)  
7. 093-1730 [2] RING-RETAINING  
8. 093-1731 [1] RING-RETAINING  
9. 094-0611 [6] WASHER (47.3X76X1-MM THK)  
10. 094-1528 [8] WASHER (53X84X1-MM THK)  
11. 136-2940 [1] BEARING  
12. 096-2653 [1] RING-RETAINING  
13. 136-2904 [1] BEARING  
14. 114-1383 [4] SHAFT-PLANETARY  
15. 114-1398 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
16. 114-1399 [1] PIPE-GAUGE  
17. 114-1401 [1] COVER-HOUSING  
18. 191-2696 [1] CAGE  
19. 135-9044 [2] SEAL-LIP TYPE  
20. 169-5617 [1] GEAR-SUN (18-TEETH)  
21. 169-5618 [3] GEAR-PLANETARY (27-TEETH)  
22. 191-2579 [1] CARRIER-PLANETARY  
23. 171-9280 [1] GEAR-RING (72-TEETH)  
24. 191-2694 [1] SHAFT-PINION  
25. 191-2695 [1] HOUSING  
26. 171-9283 [1] GEAR-SUN (24-TEETH)  
27. 171-9375 [1] SEAL-O-RING  
28. 191-2697 [1] SPACER (110X140X90.1-MM THK)  
29. 095-0891 [7] PIN-SPRING  
30. 3K-0360 [1] SEAL-O-RING  
31. 8J-8879 [1] SEAL-O-RING  
32. 7Y-0252 [3] BEARING AS-ROLLER  
33. 7Y-0339 [8] BEARING AS-ROLLER  
34. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
35. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-6385 M [16] BOLT (M16X2X180-MM)  
37. 9X-8257 [16] WASHER (17.5X30X3.5-MM THK)  
38. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 325C :

COUPLING GP-PUMP
239-6598 COUPLING GP-PUMP
COUPLING GP-PUMP
171-9104 COUPLING GP-PUMP
COUPLING GP-PUMP
171-9104 COUPLING GP-PUMP
COUPLING GP-FLEXIBLE
255-2945 COUPLING GP-FLEXIBLE
COUPLING GP-FLEXIBLE
178-6446 COUPLING GP-FLEXIBLE
COOLER GP-HYDRAULIC OIL
204-0995 COOLER GP-HYDRAULIC OIL
COOLER & MTG GP-HYDRAULIC OIL
201-3793 COOLER & MTG GP-HYDRAULIC OIL
BLOCK GP-HYDRAULIC
173-3503 BLOCK GP-HYDRAULIC
CYLINDER & LINES GP-BOOM
223-1471 CYLINDER & LINES GP-BOOM
CYLINDER & LINES GP-BOOM
223-1472 CYLINDER & LINES GP-BOOM
CYLINDER & LINES GP-BOOM
223-1472 CYLINDER & LINES GP-BOOM
CYLINDER & SEAL GP-BOOM
203-3927 CYLINDER & SEAL GP-BOOM
CYLINDER & SEAL GP-STICK
213-8200 CYLINDER & SEAL GP-STICK
CYLINDER GP-BOOM
203-3906 CYLINDER GP-BOOM
CYLINDER GP-STICK
214-1591 CYLINDER GP-STICK
DRIVE GP-AUXILIARY PUMP
191-5537 DRIVE GP-AUXILIARY PUMP

Truck sale:

 
 
Caterpillar 325C
- Crawler Excavators
WESTERN STATES EQUIPMENT
 
304,350 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
304,355 
Caterpillar 325 CF, Crawler Excavators, Construction

WHEELER MACHINERY CO.
 
 
Caterpillar 325C, Raupenbagger, Bau-Und Bergbauausrüstung
- Crawler excavators
WESTERN STATES EQUIPMENT
Caterpillar 325 CF, Crawler Excavators, Construction
270,965 
Caterpillar 325 CF, Crawler Excavators, Construction
- Crawler excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.