AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

198-6967 LADDER GP S/N TAD1-UP; CPH1-UP PART OF 198-6960 PIPELAYER AR 561N PIPELAYER


FRAME AND BODY
LADDER GP
UNDERCARRIAGE
BAR GP-EQUALIZER
IDLER GP
FRAME GP-TRACK ROLLER
GUARD GP

PIPELAYER 561N PIPELAYER CPH
 561N Pipelayer CPH00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3656 561N CPH   (2003)

FRAME AND BODY

LADDER GP
LADDER GP
198-6967 LADDER GP
 

#SEBP36560300
 

198-6967: LADDER GP

198-6967 LADDER GP
S/N TAD1-UP; CPH1-UP
PART OF 198-6960 PIPELAYER AR
i01968460 SEBP3656
1986967 LADDER GP Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-9803 [4] PLATE  
2. 161-9696 [2] SUPPORT-STEP (RUBBER)  
3. 214-1621 [1] HANDRAIL AS  
4. 214-1623 [1] HANDRAIL AS  
5. 214-1625 [1] BRACKET AS  
6. 214-1628 [1] PLATE AS  
7. 214-1629 [1] PLATE-TREAD  
8. 214-1630 [1] PLATE-TREAD  
9. 226-0281 [1] STEP AS  
10. 226-0285 [1] LADDER AS  
11. 226-0286 [1] PLATE AS  
12. 235-3396 [1] BRACKET AS  
13. 2J-1712 [21] SCREW-SOCKET (1/2-13-THD)  
14. 5P-7464 [3] CLIP (SLOT)  
15. 5P-7465 [3] CLIP (TAB)  
16. 6V-7359 [3] GROMMET (25-MM ID, 37-MM OD)  
17. 6V-7687 M [8] LOCKNUT (M12X1.75-THD)  
18. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
20. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
21. 8T-4184 M [8] BOLT (M12X1.75X45-MM)  
22. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
24. 8T-4187 M [1] BOLT (M20X2.5X80-MM)  
25. 8T-5439 [1] WASHER-HARD (21.5X45X6-MM THK)  
26. 109-3446 [1] SPACER (22X38.1X25-MM THK)  
  M   METRIC PART
 

#SEBP36560301
 

235-7076: BAR GP-EQUALIZER

235-7076 BAR GP-EQUALIZER
S/N TAD1-UP; CPH1-UP
PART OF 198-6923 UNDERCARRIAGE AR
i01966506 SEBP3656
2357076 BAR GP-EQUALIZER Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(BEARING-ALIGNING)  
2. 7K-9203 [2] SEAL-LIP TYPE  
3. 7X-0587 [2] WASHER-HARD (17X54X3-MM THK)  
4. 8E-1339 [2] SPACER (52X85X7-MM THK)  
5. 8E-1340 [1] BAR AS  
5A. 7P-7858 [1] BUSHING  
6. 8G-3732 [4] SEAL  
7. 9M-1328 [2] BEARING-SELF-ALIGNING (ALIGNING)  
8. 109-0379 [1] PIN  
9. 109-0380 [2] PIN AS  
10. 109-0382 [2] COVER  
11. 1K-6985 [4] RING-RETAINING  
12. 8T-4190 M [2] BOLT (M16X2X25-MM)  
13. 8T-7338 M [4] BOLT (M16X2X45-MM)  
14. 9X-8257 [4] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
 

#SEBP36560302
 

110-6122: CAP GP-TRACK IDLER

110-6122 CAP GP-TRACK IDLER
S/N TAD1-UP; CPH1-UP
PART OF 198-9780 UNDERCARRIAGE GP
i00471162 SEBP3656
1106122 CAP GP-TRACK IDLER Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-1138 [1] CAP AS-TRACK IDLER  
  6B-6863 [1] PIN-SPRING  
  [1] CAP  
2. 110-6124 [1] BLOCK-TRACK IDLER  
3. 8T-0282 M [2] BOLT (M16X2X120-MM)  
4. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
  M   METRIC PART
 

#SEBP36560303
 

228-8335: FRAME AS-TELESCOPING RECOIL

228-8335 FRAME AS-TELESCOPING RECOIL
S/N TAD1-UP; CPH1-UP
PART OF 198-9781, 248-3965 FRAME GP-TELESCOPING RECOIL
i02100271 SEBP3656
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  215-1617 [1] FRAME AS  
  8G-8944 [1] BUSHING  
  8T-9530 [2] TACK (METAL)  
  239-4989 [1] PLATE-WARNING (RECOIL SPRING)  
    -OR-
  228-8334 [1] FRAME AS  
  5P-7184 [1] PLATE-WARNING (RECOIL SPRING)  
  7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
  8G-8944 [1] BUSHING  
 

#SEBP36560304
 

198-9781: FRAME GP-TELESCOPING RECOIL

198-9781 FRAME GP-TELESCOPING RECOIL
S/N CPH1-114
PART OF 198-9780 UNDERCARRIAGE GP
i01513541 SEBP3656
1989781 FRAME GP-TELESCOPING RECOIL Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-4346 [8] SHIM (4-MM THK)  
2. 8E-1212 [2] COVER AS  
    (EACH INCLUDES)
  5P-9891 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
  7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
  8E-1211 [1] COVER  
3. 9X-4578 [2] SEAL AS  
4. 108-8137 Y [2] TRACK ADJUSTER & RECOIL GP  
5. 109-6771 [4] RETAINER AS  
    (EACH INCLUDES)
  241-3720 [1] FILM-WARNING (RECOIL SPRING)  
6. 198-9782 [1] FRAME AS (RH)  
7. 198-9783 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
7A. 221-3187 [1] BUSHING  
7B. 221-3198 [1] BUSHING  
8. 228-8335 Y [2] FRAME AS-TELESCOPING RECOIL  
9. 233-5001 [8] STRIP  
10. 1B-5174 [4] PLUG-PIPE  
11. 3W-2420 [2] BEARING  
12. 3W-2421 [2] RING-RETAINING  
13. 5H-6734 [2] SEAL-O-RING  
14. 8T-4121 [32] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
16. 8T-4192 M [24] BOLT (M12X1.75X25-MM)  
17. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
18. 8T-4223 [24] WASHER-HARD (13.5X25.5X3-MM THK)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560305
 

248-3965: FRAME GP-TELESCOPING RECOIL

248-3965 FRAME GP-TELESCOPING RECOIL
S/N TAD1-UP; CPH115-UP
LOW GROUND PRESSURE
PART OF 198-9780 UNDERCARRIAGE GP
i02327244 SEBP3656
2483965 FRAME GP-TELESCOPING RECOIL Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-1212 [2] COVER AS  
    (EACH INCLUDES)
1A. 5P-9891 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
1B. 7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
1C. 8E-1211 [1] COVER  
2. 9X-4578 [2] SEAL AS  
3. 108-8137 Y [2] TRACK ADJUSTER & RECOIL GP  
4. 109-6771 [4] RETAINER AS  
    (EACH INCLUDES)
4A. 241-3720 [1] FILM-WARNING (RECOIL SPRING)  
5. 198-9782 [1] FRAME AS (RH)  
6. 198-9783 [1] FRAME AS (LH)  
    (EACH FRAME AS INCLUDES)
6A. 221-3187 [1] BUSHING  
6B. 221-3198 [1] BUSHING  
7. 228-8335 Y [2] FRAME AS-TELESCOPING RECOIL  
8. 1B-5174 [4] PLUG-PIPE  
9. 3W-2420 [2] BEARING  
10. 3W-2421 [2] RING-RETAINING  
11. 5H-6734 [2] SEAL-O-RING  
12. 8T-4121 [32] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
14. 8T-4196 M [24] BOLT (M10X1.5X35-MM)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560306
 

232-3005: GUARD AR-TRACK ROLLER

232-3005 GUARD AR-TRACK ROLLER -LGP
S/N TAD1-UP; CPH1-UP
AN ATTACHMENT
i01946601 SEBP3656
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  205-6125 Y [1] GUARD GP-TRACK ROLLER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP36560307
 

205-6124: GUARD GP-TRACK GUIDE

205-6124 GUARD GP-TRACK GUIDE -MODERATE SERVICE, LGP-SHORT LGP
S/N TAD1-UP; CPH1-UP
PART OF 205-6134 GUIDING AR-UNDERCARRIAGE
AN ATTACHMENT
i01776334 SEBP3656
2056124 GUARD GP-TRACK GUIDE Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-6365 [16] SPACER (15-MM THK)  
2. 205-6157 [4] GUIDE AS (REAR)  
3. 8T-4140 M [16] BOLT (M16X2X60-MM)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
 

#SEBP36560308
 

205-6126: GUARD GP-TRACK GUIDE

205-6126 GUARD GP-TRACK GUIDE -CENTER LGP
S/N TAD1-UP; CPH1-UP
PART OF 198-9780 UNDERCARRIAGE GP
i01775634 SEBP3656
2056126 GUARD GP-TRACK GUIDE Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-6365 [8] SPACER (15-MM THK)  
2. 205-6155 [2] GUIDE AS (REAR)  
3. 8T-4140 M [8] BOLT (M16X2X60-MM)  
  M   METRIC PART
 

#SEBP36560309
 

205-6125: GUARD GP-TRACK ROLLER

205-6125 GUARD GP-TRACK ROLLER
S/N TAD1-UP; CPH1-UP
PART OF 232-3005 GUARD AR-TRACK ROLLER, 205-6135 GUIDING AR-UNDERCARRIAGE
AN ATTACHMENT
i01776382 SEBP3656
2056125 GUARD GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your 561N PIPELAYER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 204-6365 [28] SPACER (15-MM THK)  
2. 205-6140 [10] TUBE  
3. 205-6142 [2] BRACKET AS (RH)  
4. 205-6143 [2] BRACKET AS (LH)  
5. 205-6158 [2] GUARD AS (RH)  
6. 205-6159 [2] GUARD AS (LH)  
7. 110-6968 M [10] BOLT (M16X2X280-MM)  
8. 7X-0550 [12] WASHER-HARD (13.5X32X5-MM THK)  
9. 7X-0605 B [4] WASHER-HARD (13X28X1.6-MM THK)  
10. 8T-4140 M [28] BOLT (M16X2X60-MM)  
11. 8T-4194 M [4] BOLT (M12X1.75X50-MM)  
12. 8T-4778 M [10] LOCKNUT (M16X2-THD)  
13. 8T-4956 M [8] BOLT (M12X1.75X35-MM)  
14. 9X-8257 [20] WASHER (17.5X30X3.5-MM THK)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 561N :

HOOD GP
218-1820 HOOD GP
GUARD GP-RADIATOR
251-9699 GUARD GP-RADIATOR
GUARD GP-LINES
225-3385 GUARD GP-LINES
GUARD GP-LINES
225-3385 GUARD GP-LINES
GUARD GP-LINES
198-6964 GUARD GP-LINES
GUARD GP-FUEL TANK
198-6943 GUARD GP-FUEL TANK
GUARD GP-BOTTOM
145-4348 GUARD GP-BOTTOM
GRILL GP-RADIATOR
233-4091 GRILL GP-RADIATOR
BAR GP-EQUALIZER
235-7076 BAR GP-EQUALIZER
CAP GP-TRACK IDLER
110-6122 CAP GP-TRACK IDLER
228-8335 FRAME AS-TELESCOPING RECOIL
FRAME GP-TELESCOPING RECOIL
198-9781 FRAME GP-TELESCOPING RECOIL
FRAME GP-TELESCOPING RECOIL
248-3965 FRAME GP-TELESCOPING RECOIL
232-3005 GUARD AR-TRACK ROLLER
GUARD GP-TRACK GUIDE
205-6124 GUARD GP-TRACK GUIDE
GUARD GP-TRACK GUIDE
205-6126 GUARD GP-TRACK GUIDE

Truck sale:

2008 CAT 561N
USD $125,000 
2008 CAT 561N

Clark Heavy Equipment
Pleasureville, Kentucky
2006 CAT 561N
Call 
2006 CAT 561N

Clark Heavy Equipment
Pleasureville, Kentucky
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.