AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

220-3147 WIRING GP-CAB RISER S/N JCD1-UP; JNK1-UP 1200MM (47.24IN) CAB RISER PART OF 219-7841 RISER AR-CAB Type 1 AN ATTACHMENT 330C


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR 330C EXCAVATOR JCD
 330C & 330C L Excavators JCD00001-UP (MACHINE) POWERED BY C-9 Engine SEBP3662 330C JCD   (2001)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CAB
235-8317 WIRING GP-CAB
WIRING GP-CAB
235-8317 WIRING GP-CAB
WIRING GP-CAB RISER
220-3147 WIRING GP-CAB RISER
WIRING GP-CAB RISER
220-3147 WIRING GP-CAB RISER
WIRING GP-CAB RISER
220-3147 WIRING GP-CAB RISER
WIRING GP-CHASSIS
193-3393 WIRING GP-CHASSIS
 

#SEBP36620310
 

220-3147: WIRING GP-CAB RISER

220-3147 WIRING GP-CAB RISER
S/N JCD1-UP; JNK1-UP
1200MM (47.24IN) CAB RISER
PART OF 219-7841 RISER AR-CAB
Type 1
AN ATTACHMENT
i01714549 SEBP3662
2203147 WIRING GP-CAB RISER Parts scheme 2203147 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-6786 [1] BRACKET  
2. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
3. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 111-4838 [6] CLIP  
5. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
7. 111-4839 [6] STRAP  
8. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
9. 221-1702 [1] HARNESS AS-PANEL (FUSE, RELAY)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
10. 221-1704 [1] HARNESS AS  
11. 7G-1060 [1] STRAP AS-GROUND  
12. 8T-4244 M [2] NUT (M12X1.75-THD)  
13. 6V-5683 M [4] BOLT (M6X1X16-MM)  
14. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
15. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
16. 7Y-8171 [1] GROMMET  
17. 221-5174 [1] HARNESS AS-WIRING (JOYSTICK, PEDALS)  
  102-8804 [4] KIT-RECEPTACLE (4-PIN)  
  102-8805 [5] KIT-RECEPTACLE (6-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [6] KIT-CONNECTING PLUG (6-PIN)  
18. 221-5173 [1] HARNESS AS-WIRING (SMARTBOOM, FLOAT)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
19. 111-4837 [5] CLIP  
20. 222-3494 [1] HARNESS AS-WIRING (SMARTBOOM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
21. 3S-2093 B [22] STRAP-CABLE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP36620311
 

220-3147: WIRING GP-CAB RISER

220-3147 WIRING GP-CAB RISER
S/N JCD1-UP; JNK1-UP
1200MM (47.24IN) CAB RISER
PART OF 219-7841 RISER AR-CAB
Type 2
AN ATTACHMENT
i01847365 SEBP3662
2203147 WIRING GP-CAB RISER Parts scheme 2203147 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-6786 [1] BRACKET  
2. 8T-4195 CM [2] BOLT (M10X1.5X30-MM)  
3. 3S-2093 B [22] STRAP-CABLE  
4. 111-4838 [6] CLIP  
5. 8T-4121 C [14] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
7. 111-4839 [6] STRAP  
8. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
9. 221-1702 [1] HARNESS AS-PANEL (FUSE, RELAY)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
10. 221-1704 [1] HARNESS AS  
11. 7G-1060 [1] STRAP AS-GROUND  
12. 8T-4133 CM [3] NUT (M10X1.5-THD)  
13. 6V-5683 M [4] BOLT (M6X1X16-MM)  
14. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
15. 8T-4186 CM [1] BOLT (M10X1.5X40-MM)  
16. 7Y-8171 [1] GROMMET  
17. 221-5174 [1] HARNESS AS-WIRING (JOYSTICK, PEDALS)  
  102-8804 [4] KIT-RECEPTACLE (4-PIN)  
  102-8805 [5] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [6] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
18. 221-5173 [1] HARNESS AS-WIRING (SMARTBOOM, FLOAT)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
19. 111-4837 [5] CLIP  
20. 222-3494 [1] HARNESS AS-WIRING (SMARTBOOM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP36620312
 

220-3147: WIRING GP-CAB RISER

220-3147 WIRING GP-CAB RISER
S/N JCD1-UP; JNK1-UP
1200MM (47.24IN) CAB RISER
PART OF 219-7841 RISER AR-CAB
Type 3
AN ATTACHMENT
i02320851 SEBP3662
2203147 WIRING GP-CAB RISER Parts scheme 2203147 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
2. 214-7915 [1] FILM-INSTRUCTION (ENGINE SHUTOFF)  
3. 8T-4133 M [3] NUT (M10X1.5-THD)  
4. 111-4838 [6] CLIP  
5. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4136 M [11] BOLT (M10X1.5X25-MM)  
7. 111-4839 [6] STRAP  
8. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
9. 221-1702 [1] HARNESS AS-PANEL (FUSE, RELAY)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  3S-2093 [3] STRAP-CABLE  
10. 234-4975 [1] HARNESS AS-PLATFORM (ENGINE, PUMP CONTROL)  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  3S-2093 [5] STRAP-CABLE  
11. 7G-1060 [1] STRAP AS-GROUND  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
13. 204-1771 [1] PLATE  
14. 3S-2093 B [22] STRAP-CABLE  
15. 222-3494 [1] HARNESS AS-WIRING (SMARTBOOM)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16. 7Y-8171 [1] GROMMET  
17. 221-5174 [1] HARNESS AS-WIRING (JOYSTICK, PEDALS)  
  102-8804 [4] KIT-RECEPTACLE (4-PIN)  
  102-8805 [5] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [6] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS & WEDGE & INTERFACE SEAL)
  3S-2093 [3] STRAP-CABLE  
18. 221-5173 [1] HARNESS AS-WIRING (SMARTBOOM, FLOAT)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
19. 111-4837 [6] CLIP  
20. 3E-5169 [1] GUARD-SWITCH  
21. 4D-1836 [1] SWITCH-TOGGLE (SECONDARY SHUTDOWN)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP36620313
 

193-3393: WIRING GP-CHASSIS

193-3393 WIRING GP-CHASSIS
S/N JCD1-UP; JNK1-UP
PART OF 200-6666 CONTROL AR-AUXILIARY
Type 1
AN ATTACHMENT
i01528656 SEBP3662
1933393 WIRING GP-CHASSIS Parts scheme 1933393 WIRING GP-CHASSIS Parts scheme 1933393 WIRING GP-CHASSIS Parts scheme 1933393 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [50] STRAP-CABLE  
2. 193-3394 [1] HARNESS AS (CHASSIS)  
  102-8802 [14] KIT-RECEPTACLE (2-PIN)  
  102-8803 [5] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [3] KIT-RECEPTACLE (6-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [16] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 183-0998 [1] HARNESS AS-SOLENOID (FLOW LIMIT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
5. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
6. 193-3513 [1] BRACKET AS  
7. 3S-2093 [32] STRAP-CABLE  
8. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
9. 228-7221 [3] HARNESS AS-SOLENOID (1-WAY, 2-WAY FLOW)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
11. 111-4837 [1] CLIP  
12. 116-0118 [1] CLIP  
13. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
14. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 193-3383 [1] SHEET AS  
16. 197-4324 [1] BRACKET AS  
  M   METRIC PART
 

#SEBP36620314
 

193-3393: WIRING GP-CHASSIS

193-3393 WIRING GP-CHASSIS
S/N JCD1-UP; JNK1-UP
PART OF 200-6666, 228-6714 CONTROL AR-AUXILIARY
Type 2
AN ATTACHMENT
i02337655 SEBP3662
1933393 WIRING GP-CHASSIS Parts scheme 1933393 WIRING GP-CHASSIS Parts scheme 1933393 WIRING GP-CHASSIS Parts scheme 1933393 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [24] STRAP-CABLE  
2. 7I-2673 [6] STRAP-CABLE  
3. 7K-1181 [42] STRAP-CABLE  
4. 116-0118 [1] CLIP  
5. 193-3383 [1] SHEET AS  
6. 193-3513 [1] BRACKET AS  
7. 230-1205 [1] HARNESS AS-CHASSIS  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  170-9480 [1] PLUG AS-CONNECTOR (54-PIN, BROWN)  
  163-6759 [1] SEAL  
  170-9479 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  3S-2093 [7] STRAP-CABLE  
8. 230-5375 [1] HARNESS AS-SOLENOID (ENGINE, PUMP CONTROL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9. 111-4837 [1] CLIP  
10. 132-5789 [1] CLIP (LADDER)  
11. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
12. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
13. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
14. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP36620315
 

193-3393: WIRING GP-CHASSIS

193-3393 WIRING GP-CHASSIS
S/N JCD1-UP; JNK1-UP
PART OF 200-6666, 228-6714 CONTROL AR-AUXILIARY
Type 3
AN ATTACHMENT
i02337661 SEBP3662
1933393 WIRING GP-CHASSIS Parts scheme 1933393 WIRING GP-CHASSIS Parts scheme 1933393 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 C [21] STRAP-CABLE  
2. 7I-2673 [6] STRAP-CABLE  
3. 7K-1181 C [41] STRAP-CABLE  
4. 116-0118 [1] CLIP  
5. 193-3383 [1] SHEET AS  
6. 193-3513 [1] BRACKET AS  
7. 234-2753 C [1] HARNESS AS-CHASSIS  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH RECPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [11] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  170-9480 [1] PLUG AS-CONNECTOR (54-PIN, BROWN)  
  163-6759 [1] SEAL  
  170-9479 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  3S-2093 [7] STRAP-CABLE  
8. 230-5375 [1] HARNESS AS-SOLENOID (ENGINE, PUMP CONTROL)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9. 111-4837 [1] CLIP  
10. 132-5789 [1] CLIP (LADDER)  
11. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
12. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
13. 8T-4199 M [2] BOLT (M8X1.25X12-MM)  
14. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 4P-7428 [1] CLIP (LADDER)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP36620316
 

227-7068: WIRING GP-CHASSIS

227-7068 WIRING GP-CHASSIS -MACHINE SECURITY
S/N JCD1-UP; JNK1-UP
Type 1
AN ATTACHMENT
i02387097 SEBP3662
2277068 WIRING GP-CHASSIS Parts scheme 2277068 WIRING GP-CHASSIS Parts scheme 2277068 WIRING GP-CHASSIS Parts scheme 2277068 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [39] STRAP-CABLE  
2. 237-7926 [1] HARNESS AS-CHASSIS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [8] STRAP-CABLE  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 3S-2093 [5] STRAP-CABLE  
4. 224-2928 [1] HARNESS AS-CONTROL (MACHINE SECURITY SYSTEM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 222-3870 [1] COIL AS (FERRITE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
6. 227-7094 [1] SHEET AS  
7. 7X-2621 M [4] BOLT (M10X1.5X12-MM)  
8. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
9. 156-6155 Y [1] CONTROL GP-UNPROGRAMMED (SECURITY)  
10. 213-1198 Y [1] ELECTRONICS GP-MACHINE (SECURITY)  
11. 7X-0818 M [3] BOLT (M8X1.25X45-MM)  
12. 9N-0869 [3] WASHER-HARD (8.8X25.5X2-MM THK)  
13. 155-0576 [6] MOUNT-ISOLATION  
14. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
15. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
16. 111-4837 [1] CLIP  
17. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
18. 224-2926 [1] HARNESS AS-CAB (SIDE PANEL, RH)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [2] STRAP-CABLE  
19. 205-0826 [1] FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE)  
20. 224-2930 [1] BRACKET AS  
21. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
22. 149-5050 [1] RELAY (24-VOLT)(MAIN RELAY)  
22A. 149-5050 [1] RELAY (24-VOLT)(NEUTRAL START)  
23. 7X-2619 M [2] BOLT (M6X1X10-MM)  
24. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
25. 237-5693 [1] HARNESS AS-CONSOLE (RH)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [8] STRAP-CABLE  
  7K-1181 [1] STRAP-CABLE  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
26. 163-6795 [1] STRAP-CABLE  
27. 224-2929 [1] COVER AS  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-5655 [1] LAMP AS (24-VOLT)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
28. 224-2934 [1] PANEL  
29. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
30. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
31. 206-5208 [1] COIL AS (EXCITER)  
32. 206-5162 [2] KEY AS-ELECTRONIC (SECURITY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  198-5389 [1] FILM-IDENTIFICATION (IGNITION SWITCH)  
  200-5125 [1] FILM-IDENTIFICATION (IGNITION SWITCH)  
33. 219-6314 [2] KEY RING (IDENTIFICATION)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620317
 

227-7068: WIRING GP-CHASSIS

227-7068 WIRING GP-CHASSIS -MACHINE SECURITY
S/N JCD1-UP; JNK1-UP
Type 2
AN ATTACHMENT
i02387100 SEBP3662
2277068 WIRING GP-CHASSIS Parts scheme 2277068 WIRING GP-CHASSIS Parts scheme 2277068 WIRING GP-CHASSIS Parts scheme 2277068 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [33] STRAP-CABLE  
2. 237-7926 [1] HARNESS AS-CHASSIS  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [8] STRAP-CABLE  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 3S-2093 [5] STRAP-CABLE  
4. 224-2928 [1] HARNESS AS-CONTROL (MACHINE SECURITY SYSTEM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
5. 222-3870 [1] COIL AS (FERRITE)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [4] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 E SLEEVE (15-CM)  
6. 227-7094 [1] SHEET AS  
7. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
8. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
9. 207-5262 CY [1] ELECTRONICS GP-MACHINE (SECURITY)  
10. 8T-4137 M [6] BOLT (M10X1.5X20-MM)  
11. 7X-0818 M [3] BOLT (M8X1.25X45-MM)  
12. 5P-1075 [3] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 155-0576 [6] MOUNT-ISOLATION  
14. 6I-1418 [3] SPACER (8.2X12.7X28.7-MM THK)  
15. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
16. 111-4837 [1] CLIP  
17. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
18. 224-2926 [1] HARNESS AS-CAB (SIDE PANEL, RH)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [2] STRAP-CABLE  
19. 225-5927 C [1] FILM-INSTRUCTION (MACHINE SECURITY, READ OMM)  
20. 224-2930 [1] BRACKET AS  
21. 111-4836 [6] CLIP  
22. 149-5050 [1] RELAY (24-VOLT)(MAIN RELAY)  
22A. 149-5050 [1] RELAY (24-VOLT)(NEUTRAL START)  
23. 7X-2619 M [3] BOLT (M6X1X10-MM)  
24. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
25. 237-5693 [1] HARNESS AS-CONSOLE (RH)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [8] STRAP-CABLE  
  7K-1181 [1] STRAP-CABLE  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [3] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
26. 163-6795 [1] STRAP-CABLE  
27. 224-2929 [1] COVER AS  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  165-5655 [1] LAMP AS (24-VOLT)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
28. 224-2934 [1] PANEL  
29. 6V-5210 M [4] SCREW-MACHINE (M4X0.7X10-MM)  
30. 096-6166 [4] WASHER-HARD (4.5X9X1-MM THK)  
31. 206-5208 [1] COIL AS (EXCITER)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36620318
 

221-1024: WIRING GP-COLD WEATHER

221-1024 WIRING GP-COLD WEATHER
S/N JCD1-UP; JNK1-UP
PART OF 220-1889, 266-2933 COLD WEATHER AR
AN ATTACHMENT
i02326384 SEBP3662
2211024 WIRING GP-COLD WEATHER Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8V-0622 [1] CABLE AS-BATTERY  
  5P-0761 E CABLE (00-GA, RED)(14-CM)  
  9G-0003 [1] COVER AS-TERMINAL (BLACK)  
  9G-0004 [1] COVER AS-TERMINAL (RED)  
    (EACH COVER-TERMINAL INCLUDES)
  8L-8413 [1] STRAP-CABLE (WHITE)  
  8C-5917 [1] TERMINAL AS-BATTERY (POSITIVE)  
  8T-9757 [1] TERMINAL AS-BATTERY (NEGATIVE)  
    (EACH TERMINAL AS-BATTERY INCLUDES)
  1M-6119 [2] BOLT (5/16-18X1.375-IN)  
  1M-6120 [2] NUT (5/16-18-THD)  
2. 222-7736 [1] PANEL GP-WIRING  
3. 8T-4189 M [5] BOLT (M8X1.25X20-MM)  
4. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
5. 116-0118 [1] CLIP  
6. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
7. 222-0669 [1] HARNESS AS-STARTING AID  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 7K-1181 B [10] STRAP-CABLE  
9. 3E-6455 [1] SWITCH AS-PRESSURE (ENGINE OIL PRESSURE)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
10. 9X-9730 [2] BATTERY GP (12-VOLT)  
    (EACH INCLUDES)
  7N-0060 [6] VENT AS  
11. 9X-2028 M [4] BOLT (M8X1.25X220-MM)  
12. 219-6234 [1] PLATE AS  
13. 220-0372 [1] PLATE  
14. 222-8994 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0761 E CABLE (00-GA, RED)(325-CM)  
  8N-0869 [1] COVER-TERMINAL (RED)(STARTING MOTOR)  
  8N-1725 [1] COVER AS-TERMINAL (RED)(BATTERY)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
15. 161-3115 [1] COVER  
16. 161-3117 [2] KNOB AS  
    (EACH INCLUDES)
  7X-2533 M [1] BOLT (M6X1X35-MM)  
17. 4I-5049 M [2] NUT-SPACER (M6X1-THD)  
18. 8T-5005 M [6] BOLT (M10X1.5X70-MM)  
19. 7X-7729 [6] WASHER (11X25X3-MM THK)  
20. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
21. 222-0858 [1] SUPPORT AS  
22. 7K-1181 B [27] STRAP-CABLE  
23. 231-7966 [1] HARNESS AS-WIRING (FUEL HEATER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  [1] PLUG AS  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP36620319
 

221-1024: WIRING GP-COLD WEATHER

221-1024 WIRING GP-COLD WEATHER
S/N JNK1-UP
PART OF 220-1889 COLD WEATHER AR
AN ATTACHMENT
i01787661 SEBP3662
2211024 WIRING GP-COLD WEATHER Parts scheme
  For full view, you need register

Parts for your 330C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 221-5175 [1] HARNESS AS-CHASSIS  
  102-8802 [6] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [2] KIT-RECEPTACLE (4-PIN)  
  102-8805 [4] KIT-RECEPTACLE (6-PIN)  
  102-8801 [4] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [15] STRAP-CABLE  
  8T-8827 [2] BOOT (RED)  
  153-2620 [1] PLUG AS-CONNECTOR (54-PIN, BLACK)  
  163-6759 [1] SEAL  
  153-2630 [1] PLUG AS-CONNECTOR (54-PIN, BROWN)  
  163-6759 [1] SEAL  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [12] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL )
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
2. 222-7736 [1] PANEL GP-WIRING  
3. 8T-4189 M [5] BOLT (M8X1.25X20-MM)  
4. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
5. 116-0118 [1] CLIP  
6. 8T-4199 M [1] BOLT (M8X1.25X12-MM)  
7. 222-0669 [1] HARNESS AS-STARTING AID  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE& INTERFACE SEAL)
8. 7K-1181 [10] STRAP-CABLE  
9. 3E-6455 [1] SWITCH AS-PRESSURE (ENGINE OIL PRESSURE)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
10. 9X-9730 [2] BATTERY GP (12-VOLT)  
    (EACH INCLUDES)
  7N-0060 [6] VENT AS  
11. 9X-2028 M [4] BOLT (M8X1.25X220-MM)  
12. 219-6234 [1] PLATE AS  
13. 220-0372 [1] PLATE  
14. 222-8994 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0761 E CABLE (00-GA, RED)(325-CM)  
  8N-0869 [1] COVER-TERMINAL (RED)(STARTING MOTOR)  
  8N-1725 [1] COVER AS-TERMINAL (RED)(BATTERY)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
15. 161-3115 [1] COVER  
16. 161-3117 [2] KNOB AS  
    (EACH INCLUDES)
  7X-2533 M [1] BOLT (M6X1X35-MM)  
17. 4I-5049 M [2] NUT-SPACER (M6X1-THD)  
18. 8T-5005 M [6] BOLT (M10X1.5X70-MM)  
19. 7X-7729 [6] WASHER (11X25X3-MM THK)  
20. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
21. 222-0858 [1] SUPPORT AS  
22. 7K-1181 B [27] STRAP-CABLE  
23. 231-7966 [1] HARNESS AS-WIRING (FUEL HEATER)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  [1] PLUG AS  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C-9 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 01 System Voltage Low
C-9 Engine for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 03 Digital Sensor Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0263 FMI 04 Digital Sensor Supply short to ground
C-9 Engine for Caterpillar Built Machines
Electrical Connectors - Inspect
C-9 Engine for Caterpillar Built Machines
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0100 FMI 04 Engine Oil Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
C-9 Engine for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
C-9 Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for the 973C Track-Type Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C-9 Engine for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
C-9 Engine for Caterpillar Built Machines
How To Use the Functional Tests
C-9 Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 11 Injector Actuation Pressure system fault
C-9 Engine for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
C-9 Engine for the 973C Track-Type Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C-9 Engine for the 973C Track-Type Loader
Cat Data Link Circuit - Test
C-9 Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
C-9 Engine for Caterpillar Built Machines
CID 0091 FMI 02 Incorrect Throttle Switch inputs
C-9 Engine for the 973C Track-Type Loader
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
C-9 Engine for Caterpillar Built Machines
CID 0320 FMI 02 Speed/Timing Sensor Loss of Signal
C-9 Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0164 FMI 04 Injector Actuation Pressure voltage low
C-9 Engine for the 973C Track-Type Loader
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
C-9 Engine for the 973C Track-Type Loader
CID 1715 FMI 03 Engine Oil Temperature Sensor #2 short to +batt
C-9 Engine for Caterpillar Built Machines
CID 1715 FMI 04 Engine Oil Temperature Sensor #2 short to ground
C-9 Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Analog Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
C-9 Engine for Caterpillar Built Machines
Engine Speed/Timing Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
C-9 Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 03 Start Relay short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 05 Start Relay open circuit
C-9 Engine for the 973C Track-Type Loader
CID 0444 FMI 06 Start Relay short to ground
C-9 Engine for the 973C Track-Type Loader
Start Relay Circuit - Test
C-9 Engine for the 973C Track-Type Loader
Sensors and Electrical Connectors
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C-9 Engine for the 973C Track-Type Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
C-9 Engine for the 973C Track-Type Loader
Engine Wiring Information
C-9 Engine for Caterpillar Built Machines
User Defined Shutdown Input Circuit - Test
C-9 Engine for Caterpillar Built Machines
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C-9 Engine for Caterpillar Built Machines
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C-9 Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
A New Engine Oil Grade Plug 0W20 Is Now Available {1408}
2002/04/22
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 330C :

WIRING GP-CAB
235-8317 WIRING GP-CAB
WIRING GP-CAB
235-8317 WIRING GP-CAB
WIRING GP-CAB
235-1748 WIRING GP-CAB
WIRING GP-CAB
211-7989 WIRING GP-CAB
WIRING GP-CAB
211-7989 WIRING GP-CAB
WIRING GP-CAB
184-7622 WIRING GP-CAB
WIRING GP-BOOM FLOAT
193-3405 WIRING GP-BOOM FLOAT
WIRING GP-BOOM FLOAT
193-3405 WIRING GP-BOOM FLOAT
WIRING GP-CAB RISER
220-3147 WIRING GP-CAB RISER
WIRING GP-CAB RISER
220-3147 WIRING GP-CAB RISER
WIRING GP-CHASSIS
193-3393 WIRING GP-CHASSIS
WIRING GP-CHASSIS
193-3393 WIRING GP-CHASSIS
WIRING GP-CHASSIS
193-3393 WIRING GP-CHASSIS
WIRING GP-CHASSIS
227-7068 WIRING GP-CHASSIS
WIRING GP-CHASSIS
227-7068 WIRING GP-CHASSIS
WIRING GP-COLD WEATHER
221-1024 WIRING GP-COLD WEATHER

Truck sale:

Caterpillar 330C
 
Caterpillar 330C
- Crawler Excavators
CGT - COMPAGNIA GENERALE TRATTORI
 
375,750 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Caterpillar 330 CF, Crawler Excavators, Construction
379,533 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
372,345 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
 
330,000 
Caterpillar 330 CF, Crawler Excavators, Construction
- Crawler Excavators
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.