194-3200 WIRING GP-REAR -PLATFORM S/N CCP282-UP PART OF 207-3667, 210-2045, 277-5455, 277-5456 CONVERSION AR-CERTIFICATION AN ATTACHMENT 160H



ELECTRICAL AND STARTING SYSTEM
WIRING GP
LIGHTING GP
WIRING GP
POWER TRAIN
AUTOSHIFT AR

MOTOR GRADER 160H MOTOR GRADER CCP
 160H Motor Grader CCP00001-UP (MACHINE) POWERED BY 3176C Engine SEBP3686 160H CCP   (2002)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-REAR
178-0163 WIRING GP-REAR
WIRING GP-REAR
194-3200 WIRING GP-REAR
WIRING GP-REAR
194-3200 WIRING GP-REAR
WIRING GP-REAR
251-1080 WIRING GP-REAR
WIRING GP-REAR LIGHTING
184-1299 WIRING GP-REAR LIGHTING
WIRING GP-REAR LIGHTING
193-8253 WIRING GP-REAR LIGHTING
 

#SEBP36860310
 

194-3200: WIRING GP-REAR

194-3200 WIRING GP-REAR -PLATFORM
S/N CCP282-UP
PART OF 207-3667, 210-2045, 277-5455, 277-5456 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i02304023 SEBP3686
1943200 WIRING GP-REAR Parts scheme 1943200 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3E-7842 [1] RESISTOR AS  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  5P-5677 D WIRE (18-GA, BLACK)(0.1-M)  
  6T-3610 [1] RESISTOR  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3S-2093 [9] STRAP-CABLE  
3. 134-3355 [1] STRAP AS  
4. 7K-1181 [1] STRAP-CABLE  
5. 8W-3642 [1] CABLE AS  
  5P-0747 CABLE (00-GA, BLACK)(90-CM)  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  9G-8909 [1] COVER-TERMINAL (BLACK)  
6. 8W-8527 [1] SLEEVE  
7. 8W-8528 [4] SLEEVE  
8. 9L-1566 [1] SUPPORT  
9. 9L-3059 [1] SUPPORT-TUBE  
10. 9M-4594 [2] SPACER (0.406X0.875X0.75-IN THK)  
11. 9U-2277 [1] CLIP AS  
12. 061-7661 [1] CABLE AS  
  5P-0747 E CABLE (00-GA, BLACK)(42-CM)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
13. 106-8704 [1] SUPPRESSOR AS-ARC  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 118-7809 [1] PLATE  
15. 123-3688 [1] PLATE AS  
  7L-0811 [1] DOWEL  
16. 123-3689 [1] PLATE AS  
17. 123-3692 [1] ARM  
18. 123-3695 [1] PLATE  
19. 139-2116 [1] SWITCH GP-TOGGLE (ENGINE SHUTDOWN)  
20. 139-6122 [1] BOSS  
21. 254-9243 C [1] HARNESS AS-TRANSMISSION  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  110-6846 [1] PLUG AS-CONNECTOR (40-PIN)  
  9X-0141 [1] PLUG AS-CONNECTOR (40-PIN)  
  110-6848 [1] PLUG AS-CONNECTOR (40-PIN)  
  126-1774 [1] COVER-CONNECTOR  
22. 169-5414 [1] CLIP  
23. 178-0101 [1] CABLE AS (RED)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
  5P-0761 E CABLE (00-GA, RED)(87-CM)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
24. 178-0102 [1] CABLE AS (RED)  
  5P-0761 E CABLE (00-GA, RED)(148-CM)  
  1S-7252 [2] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  9X-6932 [2] BOOT-TERMINAL  
25. 179-2187 [1] HARNESS AS-REAR CHASSIS  
  127-5483 [5] PLUG AS-CONNECTOR (1-PIN)  
  127-5485 [1] PLUG AS-CONNECTOR (1-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
26. 187-1008 [1] SENDER AS-POSITION (ARTICULATION)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  9X-1813 E SLEEVE (15-CM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
27. 195-0434 [1] BRACKET  
28. 196-2970 [1] HARNESS AS-REAR LIGHTING  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
29. 197-1459 [1] PLATE  
30. 033-8248 [1] CLIP (LOOP)  
31. 109-0361 [1] FILM-INSTRUCTION (ENGINE SHUTDOWN)  
32. 115-3073 [1] CLIP AS-CONNECTING  
33. 130-5300 [5] CLIP  
34. 130-5301 [1] CLIP  
35. 174-5907 [7] CLIP (LOOP)  
36. 1S-0994 [1] CLIP (LOOP)  
37. 1S-0996 [2] CLIP  
38. 3E-0154 Y [1] SWITCH GP-MAGNETIC (SECONDARY STEERING RELAY)  
39. 3E-5169 [1] GUARD-SWITCH  
40. 4D-1432 [2] SPACER (12.52X17.14X45.72-MM THK)  
41. 4D-7388 [2] CLIP (LOOP)  
42. 4D-7794 [4] CLIP  
43. 4K-8864 [1] CLIP (LOOP)  
44. 4S-4455 [3] CLIP  
45. 5M-3062 [1] BOLT (3/8-16X0.75-IN)  
46. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
47. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
48. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
49. 6D-4244 [3] CLIP (LOOP)  
50. 6D-4246 [3] CLIP (LOOP)  
51. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
52. 6V-6893 [3] BOLT (6-32X0.375-IN)  
53. 6V-8801 [1] NUT (3/8-16-THD)  
54. 7C-4354 [6] CLIP  
55. 7X-2537 M [1] BOLT (M8X1.25X35-MM)  
56. 7X-7729 [1] WASHER (11X25X3-MM THK)  
57. 8D-9671 [1] CLIP  
58. 8M-2773 [3] CLIP (LOOP)  
59. 8T-4121 [34] WASHER-HARD (11X21X2.5-MM THK)  
60. 8T-4133 M [6] NUT (M10X1.5-THD)  
61. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
62. 8T-4137 M [21] BOLT (M10X1.5X20-MM)  
63. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
64. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
65. 8T-4191 M [2] BOLT (M10X1.5X16-MM)  
66. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
67. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
68. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
69. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
70. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
71. 8T-4226 [1] WASHER-PLATED (10.5X45X3-MM THK)  
72. 8T-4896 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
73. 8T-6870 M [2] BOLT (M8X1.25X70-MM)  
74. 8T-9364 [2] BOLT (1/4-20X0.625-IN)  
75. 8W-8909 [3] SLEEVE  
76. 8X-5489 [1] SLEEVE  
77. 139-6857 [1] PLATE  
78. 8T-4195 M [1] BOLT (M10X1.5X30-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36860311
 

251-1080: WIRING GP-REAR

251-1080 WIRING GP-REAR
S/N CCP294-UP
PART OF 247-6453 GRADE CONTROL AR
AN ATTACHMENT
i02383658 SEBP3686
2511080 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3S-2093 C [6] STRAP-CABLE  
2. 125-6390 [1] PLATE-INFORMATION (ENGINE)  
3. 246-1682 [1] WIRE AS  
4. 132-5789 [1] CLIP (LADDER)  
5. 263-9458 C [1] WIRE AS  
6. 4B-4863 [2] WASHER (4.7X11X1.2-MM THK)  
7. 4D-7794 C [1] CLIP  
8. 6T-3644 [1] CIRCUIT BREAKER AS (20-AMPERE)(GRADE CONTROL)  
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
9. 9M-4704 [2] BOLT (8-32X1-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP36860312
 

184-1299: WIRING GP-REAR LIGHTING

184-1299 WIRING GP-REAR LIGHTING -BACKUP ALARM, LIGHTS
S/N CCP1-UP
PART OF 159-7195 GENERAL AR
i01679181 SEBP3686
1841299 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3S-2093 [9] STRAP-CABLE  
2. 213-9100 [1] ALARM AS (BACKUP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-5623 D WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1813 BE SLEEVE  
3. 231-4527 [1] HARNESS AS-REAR LIGHTING  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [3] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
4. 130-5300 [5] CLIP  
5. 135-0426 Y [2] LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)  
6. 5C-2890 M [6] NUT (M6X1-THD)  
7. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
8. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
9. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
10. 4D-9517 [1] CLIP  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36860313
 

193-8253: WIRING GP-REAR LIGHTING

193-8253 WIRING GP-REAR LIGHTING -BACKUP ALARM, LIGHTS, EU
S/N CCP1-192
PART OF 191-9231 COOLING AR
AN ATTACHMENT
i01705572 SEBP3686
1938253 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3S-2093 [12] STRAP-CABLE  
2. 5C-9930 [1] LAMP GP (STOP, TURN, TAIL, RH)  
  4V-8116 [1] LAMP (24-VOLT, 5-WATT)  
  5C-9584 [2] LAMP (24-VOLT, 21-WATT)  
  6C-0109 [1] LAMP AS  
  5M-6725 [1] SCREW-TAPPING (8-18X0.625-IN)  
  8L-5828 [1] SCREW-TAPPING (8-18X0.875-IN)  
  188-9694 [1] LENS (RED, YELLOW)  
  188-9695 [1] SEAL  
3. 5C-9931 [1] LAMP GP (STOP, TAIL, TURN, LH)  
  4V-8116 [1] LAMP (24-VOLT, 5-WATT)  
  5C-9584 [2] LAMP (24-VOLT, 21-WATT)  
  6C-0110 [1] LAMP AS  
  5M-6725 [1] SCREW-TAPPING (8-18X0.625-IN)  
  8L-5828 [1] SCREW-TAPPING (8-18X0.875-IN)  
  188-9694 [1] LENS (RED, YELLOW)  
  188-9695 [1] SEAL  
4. 6C-5233 [1] BRACKET AS  
5. 6C-5234 [1] BRACKET AS  
6. 7V-7835 [1] ARM AS  
  5C-9563 [1] SPACER (11.02X26.67X55-MM THK)  
7. 7V-7838 [1] ARM AS  
  5C-9563 [1] SPACER (11.02X26.67X55-MM THK)  
8. 7X-2393 [4] BUMPER-CONICAL  
9. 9S-1316 [2] SPRING  
10. 112-5555 [2] ROD  
11. 156-0283 [2] WASHER-HARD (8.4X35X2.5-MM THK)  
12. 196-4609 [1] HARNESS AS-REAR LIGHTING  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
13. 208-7933 [2] PLATE  
15. 2V-3216 [2] CLIP (LOOP)  
16. 3B-5301 [2] PIN-COTTER  
17. 5C-2890 M [6] NUT (M6X1-THD)  
18. 5C-7261 M [4] NUT (M8X1.25-THD)  
19. 8D-5641 [4] BEARING  
20. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
22. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
23. 8T-4171 M [2] BOLT (M6X1X12-MM)  
24. 8T-4173 M [2] BOLT (M16X2X110-MM)  
25. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
26. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
29. 9M-5870 [2] GROMMET  
30. 8T-4133 M [2] NUT (M10X1.5-THD)  
31. 8T-4198 M [2] BOLT (M10X1.5X100-MM)  
32. 123-6449 Y [1] ALARM GP (BACKUP)  
33. 130-5300 [3] CLIP  
34. 160-1744 [2] BRACKET  
35. 213-1413 [1] HARNESS AS-REAR LIGHTING (RH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
36. 213-1414 [1] HARNESS AS-REAR LIGHTING (LH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36860314
 

193-8253: WIRING GP-REAR LIGHTING

193-8253 WIRING GP-REAR LIGHTING -BACKUP ALARM, LIGHTS, EU
S/N CCP1-UP
PART OF 207-3667, 210-2045, 277-5455, 277-5456 CONVERSION AR-CERTIFICATION, 191-9231 COOLING AR
AN ATTACHMENT
i01930474 SEBP3686
1938253 WIRING GP-REAR LIGHTING Parts scheme 1938253 WIRING GP-REAR LIGHTING Parts scheme 1938253 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)  
2. 3S-2093 [13] STRAP-CABLE  
3. 5C-9930 [1] LAMP GP (RH)  
  4V-8116 [1] LAMP (24-VOLT, 5-WATT)(TAIL)  
  5C-9584 [2] LAMP (24-VOLT, 21-WATT)(STOP)  
  6C-0109 [1] LAMP AS (STOP, TURN, TAIL, RH)  
  5M-6725 [1] SCREW-TAPPING (8-18X0.625-IN)  
  8L-5828 [1] SCREW-TAPPING (8-18X0.875-IN)  
  188-9694 [1] LENS (RED, YELLOW)  
  188-9695 [1] SEAL  
4. 5C-9931 [1] LAMP GP (LH)  
  4V-8116 [1] LAMP (24-VOLT, 5-WATT)(TAIL)  
  5C-9584 [2] LAMP (24-VOLT, 21-WATT)(STOP)  
  6C-0110 [1] LAMP AS (STOP, TAIL, TURN, LH)  
  5M-6725 [1] SCREW-TAPPING (8-18X0.625-IN)  
  8L-5828 [1] SCREW-TAPPING (8-18X0.875-IN)  
  188-9694 [1] LENS (RED, YELLOW)  
  188-9695 [1] SEAL  
5. 6C-5233 [1] BRACKET AS (RH)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
6. 6C-5234 [1] BRACKET AS (LH)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 7K-1181 [7] STRAP-CABLE  
8. 7V-7835 [1] ARM AS (RH)  
  5C-9563 [1] SPACER (11.02X26.67X55-MM THK)  
9. 7V-7838 [1] ARM AS (LH)  
  5C-9563 [1] SPACER (11.02X26.67X55-MM THK)  
10. 7X-2393 [4] BUMPER-CONICAL  
11. 9S-1316 [2] SPRING  
12. 9G-7101 [1] SPACER (11X20X30-MM THK)  
13. 112-5555 [2] ROD  
14. 156-0283 [2] WASHER-HARD (8.4X35X2.5-MM THK)  
15. 160-1744 [2] BRACKET  
16. 196-4609 [1] HARNESS AS-REAR LIGHTING  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
17. 208-7933 [2] PLATE  
18. 213-1413 [1] HARNESS AS-REAR LIGHTING (RH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
19. 213-1414 [1] HARNESS AS-REAR LIGHTING (LH)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
20. 213-9100 [1] ALARM AS (BACKUP)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-5623 D WIRE-ELECTRICAL (16-GA, BLACK)(0.4-M)  
  9X-1813 E SLEEVE (31-CM)  
21. 291-1049 [1] PLATE  
22. 306-3046 [1] HARNESS AS-REAR  
23. 130-5300 [3] CLIP  
24. 2V-3216 [2] CLIP (LOOP)  
25. 3B-5301 [2] PIN-COTTER  
26. 5C-2890 M [7] NUT (M6X1-THD)  
27. 5C-7261 M [4] NUT (M8X1.25-THD)  
28. 5P-1076 [2] WASHER-HARD (13.5X30X4-MM THK)  
29. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
30. 5P-9297 [1] CLIP (LOOP)  
31. 7G-7053 [2] GROMMET  
32. 8D-5641 [4] BEARING  
33. 8T-2501 [1] BOLT (3/8-16X2-IN)  
34. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
35. 8T-4122 [4] WASHER-HARD (17X32X3.5-MM THK)  
36. 8T-4133 M [2] NUT (M10X1.5-THD)  
37. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
38. 8T-4138 M [1] BOLT (M6X1X20-MM)  
39. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
40. 8T-4171 M [2] BOLT (M6X1X12-MM)  
41. 8T-4173 M [2] BOLT (M16X2X110-MM)  
42. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
43. 8T-4205 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
44. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4778 M [2] LOCKNUT (M16X2-THD)  
47. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
48. 9X-6165 [2] WASHER (6.5X22X2.5-MM THK)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP36860315
 

161-1020: WIRING GP-SECONDARY STEERING

161-1020 WIRING GP-SECONDARY STEERING
S/N CCP1-UP
PART OF 166-3302 STEERING AR-SECONDARY
AN ATTACHMENT
i01858216 SEBP3686
1611020 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 2L-0273 [1] FITTING (RUBBER)  
2. 3E-0154 Y [1] SWITCH GP-MAGNETIC (SECONDARY STEERING)  
3. 3E-6450 [1] SWITCH AS-PRESSURE (SECONDARY STEERING)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
4. 3E-7842 [1] RESISTOR AS (SECONDARY STEERING INDICATOR)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  6T-3610 [1] RESISTOR  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
5. 3S-2093 [2] STRAP-CABLE  
6. 9L-1566 [1] SUPPORT  
7. 9W-1442 [2] FUSE (10-AMPERE)  
8. 118-7809 [1] PLATE  
9. 132-6640 Y [1] CONTROL GP-SECONDARY STEERING  
10. 134-3355 [1] STRAP AS  
11. 140-8864 [1] CABLE AS  
  1S-7252 [2] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(20-CM)  
12. 178-0101 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0761 E CABLE (00-GA, RED)(87-CM)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
13. 178-0102 [1] CABLE AS  
  1S-7252 [2] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)(148CM)  
  5P-0761 E CABLE (00-GA, RED)(148-CM)  
  9X-6932 [2] BOOT-TERMINAL  
14. 194-2903 [1] ELBOW AS  
  8T-0119 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
15. 195-0434 [1] BRACKET  
16. 197-1459 [1] PLATE  
17. 130-5300 [1] CLIP  
18. 174-5907 [3] CLIP (LOOP)  
19. 3E-6754 [1] GROMMET  
20. 3K-0360 [1] SEAL-O-RING  
21. 5C-2890 M [2] NUT (M6X1-THD)  
22. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
23. 6V-1322 [4] BOLT (1/4-20X0.375-IN)  
24. 6V-8801 [2] NUT (3/8-16-THD)  
25. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4133 M [2] NUT (M10X1.5-THD)  
27. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
28. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
31. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
32. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
33. 3E-8765 [1] SWITCH AS (24-VOLT)(SECONDARY STEERING)  
  3E-8816 [1] ACTUATOR  
  3E-8825 [2] LAMP (24-VOLT)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP36860316
 

159-5845: WIRING GP-STEERING CONSOLE

159-5845 WIRING GP-STEERING CONSOLE
S/N CCP1-UP
PART OF 159-7195 GENERAL AR
i01674815 SEBP3686
1595845 WIRING GP-STEERING CONSOLE Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3E-0109 [3] PLUG (ROCKER SWITCH)  
2. 3E-6477 [1] RELAY AS (24-VOLT)(TAIL, PANEL LAMPS)  
3. 3S-2093 [8] STRAP-CABLE  
4. 9W-1441 [1] FUSE (15-AMPERE)  
5. 9W-1442 [11] FUSE (10-AMPERE)  
6. 102-9383 [1] PLATE  
7. 112-6175 [2] SWITCH AS-LIMIT (TRANSMISSION NEUTRALIZER)  
    (EACH INCLUDES)
  6V-8376 [3] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [3] LOCKWASHER  
8. 239-8335 [1] HARNESS AS-CONSOLE (STEERING)  
  174-7566 [2] BLOCK AS-FUSE  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  127-5484 [2] RECEPTACLE AS-CONNECTOR (1-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
9. 180-4028 [2] BRACKET  
10. 180-7033 [1] COVER  
11. 186-1714 [1] FILM-FUSE (LH)  
12. 186-1715 [1] FILM-FUSE (RH)  
13. 194-4181 [1] RESISTOR AS  
  8C-3334 [1] RIVET-TUBULAR  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  1S-9593 [1] STRAP-CABLE  
  5P-6008 D TUBE-HEAT SHRINK (6.35-MM DIA)(0.1-M)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
14. 130-5300 [2] CLIP  
15. 139-2120 [1] SWITCH AS (DIFFERENTIAL LOCK CONTROL)  
  3E-8825 [2] LAMP (24-VOLT)  
  123-5861 [1] ACTUATOR  
16. 151-4957 M [4] BOLT-SOCKET HEAD (M3X0.5X25-MM)  
17. 174-8131 M [1] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
18. 228-5009 [4] CLIP  
19. 3C-6969 M [4] NUT (M3X0.5-THD)  
20. 3E-9324 [1] SWITCH AS (PANEL LIGHTS)  
  3E-8783 [1] ACTUATOR  
  3E-8825 [1] LAMP (24-VOLT)  
21. 3E-8763 [1] SWITCH AS (24-VOLT)(TAIL LIGHTS)  
  3E-8825 [1] LAMP (24-VOLT)  
  3E-9323 [1] ACTUATOR  
22. 3L-8187 [4] LOCKWASHER  
23. 4B-1281 [4] SCREW-MACHINE (1/4-20X0.625-IN)  
24. 4B-4274 [16] WASHER (5.5X13X1.2-MM THK)  
25. 4D-1212 [1] GROMMET  
26. 5C-2890 M [3] NUT (M6X1-THD)  
27. 5C-8312 M [1] NUT (M4X0.7-THD)  
28. 5C-9553 M [2] BOLT (M6X1X16-MM)  
29. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
30. 6D-4244 [2] CLIP (LOOP)  
31. 6J-0488 [1] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
32. 6V-8185 [4] NUT (1/4-20-THD)  
33. 6V-8801 [1] NUT (3/8-16-THD)  
34. 8C-7508 [2] LOCKWASHER  
36. 8L-6521 [8] BOLT (10-32X0.5-IN)  
37. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
38. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
39. 8T-4971 M [1] BOLT (M6X1X30-MM)  
40. 9P-2553 [1] SPACER (6.83X10.28X11-MM THK)  
41. 9X-1046 M [6] SCREW (M4X0.7X18-MM)  
42. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
43. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
44. 3E-0109 [1] PLUG (ROCKER SWITCH)(ETHER STARTING AID)  
45. 3E-0109 [1] PLUG (ROCKER SWITCH)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP36860317
 

159-5853: WIRING GP-STEERING CONSOLE

159-5853 WIRING GP-STEERING CONSOLE -EU
S/N CCP1-UP
PART OF 207-3667, 210-2045, 277-5455, 277-5456 CONVERSION AR-CERTIFICATION
AN ATTACHMENT
i01684446 SEBP3686
1595853 WIRING GP-STEERING CONSOLE Parts scheme 1595853 WIRING GP-STEERING CONSOLE Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 3E-0109 [3] PLUG (ROCKER SWITCH)  
2. 3E-6477 [3] RELAY AS (24-VOLT)(TAIL,PANEL LAMPS)  
3. 3S-2093 [8] STRAP-CABLE  
4. 8X-5153 [1] FILM-FACE (TURN SIGNAL, HAZARD)  
5. 8X-5154 [1] FILM-FACE (HEADLIGHTS HIGH, LOW BEAM)  
6. 9W-1441 [1] FUSE (15-AMPERE)  
7. 9W-1442 [12] FUSE (10-AMPERE)  
8. 102-9383 [1] PLATE  
9. 112-6175 [1] SWITCH AS-LIMIT (TRANSMISSION NEUTRALIZER)  
  6V-8376 [3] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [3] LOCKWASHER  
10. 173-3064 [1] SWITCH GP-ROTARY (TURN SIGNAL, HAZARD)  
  5L-7200 [1] SCREW (8-32X0.375-IN)  
  9B-7233 [1] LOCKWASHER  
11. 173-4490 [1] FLASHER AS (24-VOLT)(24 VOLT)  
12. 180-4028 [2] BRACKET  
13. 180-7033 [1] COVER  
14. 186-1715 [1] FILM-FUSE (LH)  
15. 194-4181 [1] RESISTOR AS (PANEL LAMP DIMMER)  
16. 239-8336 [1] HARNESS AS-CONSOLE  
  174-7566 [2] BLOCK AS-FUSE  
  127-5483 [1] PLUG AS-CONNECTOR (1-PIN)  
  127-5484 [2] RECEPTACLE AS-CONNECTOR (1-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
  102-8801 [2] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [2] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
17. 197-5453 [1] FILM-FUSE (RH)  
18. 089-7960 [2] WASHER (5.3X25X1.6-MM THK)  
19. 103-5678 [1] SWITCH AS-ROTARY (HEADLIGHT DIMMER)  
  5L-7200 [1] SCREW (8-32X0.375-IN)  
  9B-7233 [1] LOCKWASHER  
20. 130-5300 [2] CLIP  
21. 139-2120 [1] SWITCH AS (DIFFERENTIAL LOCK CONTROL)  
  3E-8825 [2] LAMP (24-VOLT)  
  123-5861 [1] ACTUATOR  
22. 151-4957 M [4] BOLT-SOCKET HEAD (M3X0.5X25-MM)  
23. 174-8131 M [2] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
24. 228-5009 [4] CLIP  
25. 3C-6969 M [4] NUT (M3X0.5-THD)  
26. 3E-8772 [1] SWITCH-ROCKER (24-VOLT)(HEADLIGHTS)  
  3E-8825 [2] LAMP (24-VOLT)  
  3E-9326 [1] ACTUATOR  
27. 3E-9324 [1] SWITCH AS (PANEL BACKLIGHTS)  
  3E-8825 [1] LAMP (24-VOLT)  
  3E-8783 [1] ACTUATOR  
28. 3L-8187 [4] LOCKWASHER  
29. 4B-1281 [4] SCREW-MACHINE (1/4-20X0.625-IN)  
30. 4B-2047 [2] NUT (10-24-THD)  
31. 4B-4274 [18] WASHER (5.5X13X1.2-MM THK)  
32. 4D-1212 [1] GROMMET  
33. 5C-2890 M [3] NUT (M6X1-THD)  
34. 5C-8312 M [2] NUT (M4X0.7-THD)  
35. 5C-9553 M [2] BOLT (M6X1X16-MM)  
36. 5M-6755 [2] SCREW-MACHINE (10-24X0.562-IN)  
37. 5P-4115 [2] WASHER-HARD (7.2X19X2-MM THK)  
38. 6D-4244 [2] CLIP (LOOP)  
39. 6J-0488 [1] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
40. 6V-8185 [4] NUT (1/4-20-THD)  
41. 6V-8801 [1] NUT (3/8-16-THD)  
42. 8C-7508 [4] LOCKWASHER  
44. 8L-6521 [8] BOLT (10-32X0.5-IN)  
45. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
46. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
47. 8T-4971 M [1] BOLT (M6X1X30-MM)  
48. 8X-6296 [1] LEVER (TURN SIGNAL, HAZARD)  
49. 9P-2553 [1] SPACER (6.83X10.28X11-MM THK)  
50. 9X-1046 M [6] SCREW (M4X0.7X18-MM)  
51. 9X-2042 M [1] SCREW-TRUSS HEAD (M6X1X12-MM)  
52. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
53. 112-6175 [1] SWITCH AS-LIMIT (BRAKE PEDAL)  
  6V-8376 [3] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [3] LOCKWASHER  
54. 8X-6296 [1] LEVER (HEADLIGHT DIMMER)  
  M   METRIC PART
 

#SEBP36860318
 

117-2760: WIRING GP-UNIT INJECTOR

117-2760 WIRING GP-UNIT INJECTOR
S/N 3PD1-UP
PART OF 161-1751, 285-6406 ENGINE AR
i01855238 SEBP3686
1172760 WIRING GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
1. 4P-9537 [1] HARNESS AS-WIRING (UNIT INJECTOR)  
2. 2V-3216 [4] CLIP (LOOP)  
3. 7X-2468 [3] CLIP  
4. 7E-6508 [6] CAP AS  
5. 6V-8214 M [9] BOLT (M6X1X20-MM)  
6. 5P-0537 [9] WASHER-HARD (7.2X14.5X2-MM THK)  
  M   METRIC PART
 

#SEBP36860319
 

161-0764: AUTOSHIFT AR

161-0764 AUTOSHIFT AR -TRANSMISSION
S/N CCP1-UP
PART OF 207-3667, 210-2045, 277-5455, 277-5456 CONVERSION AR-CERTIFICATION, 197-5958, 236-3949 SNOW AR-MOTOR GRADER
AN ATTACHMENT
i01816435 SEBP3686
  For full view, you need register

Parts for your 160H MOTOR GRADER:

Pos. Part No Qty Parts name Comments
  Z [1] ELECTRONICS GP-POWER TRAIN (AUTOSHIFT)  
  3E-8763 [1] SWITCH AS (24-VOLT)(AUTOSHIFT TRANSMISSION)  
  3E-8784 [1] ACTUATOR  
  3E-8825 [1] LAMP (24-VOLT)(AUTOSHIFT)  
  Z   NOT SERVICED SEPARATELY
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3176C and 3196 Engines for Caterpillar Built Machines
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3176C and 3196 Engines for Caterpillar Built Machines
CID 0168 FMI 01 System Voltage Low
3176C and 3196 Engines for Caterpillar Built Machines
CID 0168 FMI 00 System Voltage High
3176C and 3196 Engines for Caterpillar Built Machines
CID 0545 FMI 05 Ether Start Relay open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0545 FMI 06 Ether Start Relay short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Electrical Connectors - Inspect
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0174 FMI 03 Fuel Temperature open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0174 FMI 04 Fuel Temperature short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0274 FMI 04 Atmospheric Pressure short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0041 FMI 04 8 Volt DC Supply short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0248 FMI 09 Cat Data Link not communicating
3176C and 3196 Engines for Caterpillar Built Machines
CID 0283 FMI 05 Filter Restrict Lamp open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Throttle Position Sensor Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Digital Sensor Supply Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Cooling Fan Bypass Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 05 Engine Cooling Fan Bypass Solenoid open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1076 FMI 06 Engine Cooling Fan Bypass Solenoid short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0091 FMI 08 Throttle Position signal abnormal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0283 FMI 06 Filter Restrict Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0548 FMI 06 Throttle Lock Lamp short
3176C and 3196 Engines for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3176C and 3196 Engines for Caterpillar Built Machines
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C and 3196 Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Position Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0788 FMI 02 Loss of Engine Retarder Selector Switch Signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Compression Brake Lamp Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 05 Retarder Indicator Lamp open circuit
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1586 FMI 06 Retarder Indicator Lamp short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3176C and 3196 Engines for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3176C and 3196 Engines for Caterpillar Built Machines
Cat Data Link Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Lock Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
Sensors and Electrical Connectors
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Throttle Position Sensor Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Air Filter Restriction Lamp - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0190 FMI 02 Loss of Engine Speed Signal
3176C and 3196 Engines for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
Sensors and Electrical Connectors
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Shutdown Switch Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0275 FMI 03 Right Turbo Inlet Pressure open/short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0275 FMI 04 Right Turbo Inlet Pressure short to ground
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0485 FMI 05 Engine Fan Rev Solenoid open circuit
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0485 FMI 06 Engine Fan Rev Solenoid short to ground
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Fan Reversing Solenoid Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0486 FMI 02 Engine Fan Reverse Switch inputs incorrect
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3176C and 3196 Engines for Caterpillar Built Machines
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Wiring Information
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3176C, 3196 and 3406E Engines for 725, 730, 735, 740, and 740 Ejector Articulated Trucks
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3176C, 3196 and 3406E Engines for Caterpillar Built Machines
Engine Shutdown Switch Circuit - Test
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 160H :

WIRING GP-REAR
194-3200 WIRING GP-REAR
WIRING GP-REAR
178-0163 WIRING GP-REAR
WIRING GP-REAR
178-0163 WIRING GP-REAR
WIRING GP-REAR
178-0163 WIRING GP-REAR
WIRING GP-REAR
159-5877 WIRING GP-REAR
WIRING GP-REAR
159-5877 WIRING GP-REAR
WIRING GP-GRADE CONTROL
252-5709 WIRING GP-GRADE CONTROL
WIRING GP-FRONT
247-6433 WIRING GP-FRONT
WIRING GP-REAR
251-1080 WIRING GP-REAR
WIRING GP-REAR LIGHTING
184-1299 WIRING GP-REAR LIGHTING
WIRING GP-REAR LIGHTING
193-8253 WIRING GP-REAR LIGHTING
WIRING GP-REAR LIGHTING
193-8253 WIRING GP-REAR LIGHTING
WIRING GP-SECONDARY STEERING
161-1020 WIRING GP-SECONDARY STEERING
WIRING GP-STEERING CONSOLE
159-5845 WIRING GP-STEERING CONSOLE
WIRING GP-STEERING CONSOLE
159-5853 WIRING GP-STEERING CONSOLE
WIRING GP-UNIT INJECTOR
117-2760 WIRING GP-UNIT INJECTOR

Truck sale:

Caterpillar 160H
 
Caterpillar 160H
- motor graders
WESTERN STATES EQUIPMENT
 
 
Caterpillar 160H, motor graders, Construction


Caterpillar 160H, motorgrader mijnbouw, Bouw
90.000 
Caterpillar 160H, motorgrader mijnbouw, Bouw

WAGNER EQUIPMENT CO
Caterpillar 160H, motorgrader mijnbouw, Bouw
69.912 
Caterpillar 160H, motorgrader mijnbouw, Bouw
- motor graders
MICHIGAN CAT
Caterpillar 160H, motorgrader mijnbouw, Bouw
74.912 
Caterpillar 160H, motorgrader mijnbouw, Bouw
- motor graders
MICHIGAN CAT