246-9309 MOUNTING GP-LINES S/N SHA1-UP PART OF 209-9929, 213-9293, 291-9203 BACKHOE AR-EXTENDABLE STICK, 209-9924, 213-9290, 291-9202 BACKHOE AR-STANDARD STICK Type 2 AN ATTACHMENT 416E



HYDRAULIC SYSTEM
CYLINDER GP
PUMP GP
TANK GP
VALVE GP-CONTROL
VALVE GP-BANK

BACKHOE LOADER 416E BACKHOE LOADER SHA
 416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3701 416E SHA   (2006)

HYDRAULIC SYSTEM

CYLINDER GP
LINES GP-COUPLER
424-8970 LINES GP-COUPLER
MOUNTING GP-LINES
246-9309 MOUNTING GP-LINES
MOUNTING GP-LINES
246-9309 MOUNTING GP-LINES
BRACE GP-LIFT CYLINDER
218-0745 BRACE GP-LIFT CYLINDER
PAD & GUARD GP-STABILIZER
133-3362 PAD & GUARD GP-STABILIZER
PAD & GUARD GP-STABILIZER
133-3362 PAD & GUARD GP-STABILIZER
 

#SEBP37010450
 

246-9309: MOUNTING GP-LINES

246-9309 MOUNTING GP-LINES
S/N SHA1-UP
PART OF 209-9929, 213-9293, 291-9203 BACKHOE AR-EXTENDABLE STICK, 209-9924, 213-9290, 291-9202 BACKHOE AR-STANDARD STICK
Type 2
AN ATTACHMENT
i03383080 SEBP3701
2469309 MOUNTING GP-LINES Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 248-4277 [2] PLATE  
2. 311-2513 C [2] BLOCK  
3. 311-2514 C [2] BLOCK  
4. 311-2515 C [2] BLOCK  
5. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP37010451
 

247-7867: PUMP GP-PISTON

247-7867 PUMP GP-PISTON
S/N SHA1-2590; SHA2613-2622
PART OF 214-2198 HYDRAULIC AR
i02368048 SEBP3701
2477867 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 232-3587 [1] KIT-BEARING (FRONT)  
    (INCLUDES CUP & CONE)
2. 232-3586 [1] KIT-BEARING (REAR)  
    (INCLUDES CUP & CONE)
3. 296-6715 [1] KIT-BEARING  
    (INCLUDES BEARINGS & PINS)
4. 263-5514 [1] SHAFT-DRIVE  
5. 260-3146 [1] SWASHPLATE  
6. 260-3149 [1] KIT-CYLINDER (PISTON PUMP)  
    (INCLUDES PISTON AS, RETAINER, RETAINER GUIDE, PINS, BLOCK, SPRING, SPRING SEATS & RING)
7. 260-3147 [1] PLATE  
8. 248-1348 [1] VALVE GP-CONTROL (GENERATOR PUMP)  
9. 3J-1907 [1] SEAL-O-RING  
10. 3K-0360 [1] SEAL-O-RING  
11. 232-3591 [1] SEAL-LIP TYPE  
12. 6J-7855 [1] RING-RETAINING  
13. 2M-9780 [2] SEAL-O-RING  
14. 8L-2777 [1] SEAL-O-RING  
15. 6J-2245 [1] SEAL-O-RING  
16. 3J-7354 [4] SEAL-O-RING  
17. 234-4173 [4] SEAL-O-RING  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  260-3150 [1] KIT-SEAL (PISTON PUMP)  
    (INCLUDES RINGS & SEALS)
 

#SEBP37010452
 

296-6714: PUMP GP-PISTON

296-6714 PUMP GP-PISTON
S/N SHA2591-2612; SHA2623-UP
PART OF 214-2198 HYDRAULIC AR
i02779366 SEBP3701
2966714 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 232-3587 [1] KIT-BEARING (AUXILIARY PUMP)  
2. 232-3586 [1] KIT-BEARING (AUXILIARY PUMP)  
    (EACH BEARING KIT INCLUDES CUP & CONE)
3. 296-6715 [1] KIT-BEARING (SWASHPLATE)  
    (INCLUDES BEARINGS & DOWEL PINS)
4. 263-5514 [1] SHAFT-DRIVE  
5. 260-3146 [1] SWASHPLATE  
6. 260-3149 [1] KIT-CYLINDER (PISTON PUMP)  
    (INCLUDES PISTON AS, SLIPPER RETAINER, GUIDE, HOLD DOWN PINS, CYLINER BLOCK, SEAT SPRINGS, SPRING & RETAINING RING)
7. 260-3147 [1] PLATE  
8. 248-1348 Y [1] VALVE GP-CONTROL (GENERATOR PUMP)  
9. 232-3591 L [1] SEAL-LIP TYPE  
10. 6J-7855 [1] RING-RETAINING  
11. 2M-9780 L [2] SEAL-O-RING  
12. 3J-1907 L [1] SEAL-O-RING  
13. 3K-0360 L [1] SEAL-O-RING  
14. 307-3049 L [1] PLUG AS  
15. 6J-2245 L [1] SEAL-O-RING  
16. 3J-7354 L [4] SEAL-O-RING  
17. 234-4173 L [4] SEAL-O-RING  
18. 359-5232 [1] ROD-PISTON  
19. 341-7656 [1] CAP-END  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  307-3043 L [1] KIT-SEAL (PISTON PUMP)  
    (ALSO INCLUDES SEAL RINGS, CAP SEAL, PISTON RINGS & PARTS MARKED J IN THE GRAPHIC)
  L   KIT MARKED L SERVICES PART(S) MARKED L
  Y   SEPARATE ILLUSTRATION
 

#SEBP37010453
 

128-5596: SHAFT GP-PUMP DRIVE

128-5596 SHAFT GP-PUMP DRIVE
S/N SHA1-UP
PART OF 112-1826 DRIVE & MTG GP-PUMP
AN ATTACHMENT
i00200993 SEBP3701
1285596 SHAFT GP-PUMP DRIVE Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 130-8150 [1] RING-RETAINING  
 

#SEBP37010454
 

245-8777: TANK & MTG GP-HYDRAULIC

245-8777 TANK & MTG GP-HYDRAULIC
S/N SHA1-2280
PART OF 214-2198 HYDRAULIC AR
i02096852 SEBP3701
2458777 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 1P-4278 [1] CLAMP-HOSE  
2. 5D-1026 [2] CLAMP-BAND  
3. 5P-1442 E HOSE (124-CM)  
4. 5P-1505 E HOSE (8-CM)  
5. 9M-0164 [1] CLAMP-HOSE  
6. 9R-9925 [1] FILTER ELEMENT-BREATHER (HYDRAULIC TANK)  
7. 127-4471 [1] CLAMP-HOSE  
8. 132-3056 [1] SEAL-O-RING  
9. 210-7773 [1] BRACKET AS  
10. 222-4067 [6] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
11. 234-6927 [1] HOSE  
12. 293-4671 [1] TUBE AS  
13. 235-5843 [1] DIFFUSER AS  
14. 237-3797 [1] CAP-FILL (HYDRAULIC OIL)  
15. 245-8778 [1] TANK GP-HYDRAULIC  
  246-5286 [1] TANK  
  253-8295 [1] GAUGE-SIGHT (FLUID LEVEL)  
16. 150-3026 [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  6V-4292 [1] ELBOW  
17. 6D-3479 [1] CLIP (LOOP)  
18. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
20. 7X-7729 [4] WASHER (11X25X3-MM THK)  
21. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
22. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
23. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37010455
 

245-8777: TANK & MTG GP-HYDRAULIC

245-8777 TANK & MTG GP-HYDRAULIC
S/N SHA2281-UP
PART OF 214-2198 HYDRAULIC AR
i02760894 SEBP3701
2458777 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 5P-4961 C [3] CLAMP-HOSE  
3. 5P-1442 CE HOSE (8-CM)  
3A. 5P-1442 CE HOSE (124-CM)  
5. 9M-0164 [1] CLAMP-HOSE  
6. 9R-9925 [1] FILTER ELEMENT-BREATHER (HYDRAULIC TANK)  
7. 127-4471 [1] CLAMP-HOSE  
8. 132-3056 [1] SEAL-O-RING  
9. 210-7773 [1] BRACKET AS  
10. 222-4067 [6] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
11. 234-6927 [1] HOSE  
12. 293-4671 [1] TUBE AS  
13. 235-5843 [1] DIFFUSER AS  
14. 237-3797 [1] CAP-FILL (HYDRAULIC OIL)  
15. 245-8778 [1] TANK GP-HYDRAULIC  
  246-5286 [1] TANK  
  253-8295 [1] GAUGE-SIGHT (FLUID LEVEL)  
16. 217-8185 C [1] ELBOW AS  
  3K-0360 [1] SEAL-O-RING  
  9X-3982 [1] ELBOW  
17. 6D-3479 [1] CLIP (LOOP)  
18. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
20. 7X-7729 [4] WASHER (11X25X3-MM THK)  
21. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
22. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
23. 8T-4191 M [4] BOLT (M10X1.5X16-MM)  
24. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-0328 [6] WASHER-HARD (5.5X10X1-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37010456
 

418-9152: VALVE & MTG GP-COUPLER

418-9152 VALVE & MTG GP-COUPLER
S/N SHA1-UP
PART OF 424-8970 LINES GP-COUPLER
AN ATTACHMENT
i06153590 SEBP3701
4189152 VALVE & MTG GP-COUPLER Parts scheme
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
1. 249-7160 [1] VALVE GP-SOLENOID (12-VOLT)(AXLE SPEED SELECT)  
2. 249-7859 [2] VALVE GP-SHUTTLE (QUICK COUPLER)  
3. 261-7997 [1] HARNESS AS-WIRING (JUMPER)  
 

#SEBP37010457
 

209-9943: VALVE AR-BANK 2

209-9943 VALVE AR-BANK 2
S/N SHA1-UP
AN ATTACHMENT
i02115806 SEBP3701
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
  206-1645 Y [1] CONTROL GP-HYDRAULIC HAND (LOADER)  
  219-8566 Y [1] FASTENER GP-VALVE (BANK)  
  220-5973 Y [1] KICKOUT & POSITIONER GP  
  248-0481 Y [1] VALVE GP-BANK 2  
  211-4262 Y [1] WIRING GP-KICKOUT & POSITIONER  
   
  251-5625 [1] FILM-INSTRUCTION (BUCKET CONTROL)  
    (ON RIGHT HAND CONSOLE)
  Y   SEPARATE ILLUSTRATION
 

#SEBP37010458
 

209-9944: VALVE AR-BANK 3

209-9944 VALVE AR-BANK 3
S/N SHA1-UP
AN ATTACHMENT
i02273097 SEBP3701
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
  209-3364 Y [1] CONTROL GP-HYDRAULIC HAND (LOADER)  
  219-8566 Y [1] FASTENER GP-VALVE (BANK)  
  220-5973 Y [1] KICKOUT & POSITIONER GP  
  246-8478 Y [1] LINES GP-LOADER AUXILIARY  
  248-0482 Y [1] VALVE GP-BANK 3  
  211-4262 Y [1] WIRING GP-KICKOUT & POSITIONER  
   
  251-5626 [1] FILM-INSTRUCTION (BUCKET CONTROL)  
    (ON RH CONSOLE)
  Y   SEPARATE ILLUSTRATION
 

#SEBP37010459
 

209-9934: VALVE AR-BANK 6

209-9934 VALVE AR-BANK 6
S/N SHA1-UP
FOR USE WITH @@@@@209-9924@@@@@
AN ATTACHMENT
i02115805 SEBP3701
  For full view, you need register

Parts for your 416E BACKHOE LOADER:

Pos. Part No Qty Parts name Comments
  228-3974 Y [1] LINES GP-STABILIZER  
  290-8077 Y [1] MOUNTING GP-BANK VALVE  
  248-0483 Y [1] VALVE GP-BANK 6  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Magazine
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 416E :

MOUNTING GP-LINES
246-9309 MOUNTING GP-LINES
MOUNTING GP-CYLINDER
263-8577 MOUNTING GP-CYLINDER
MOUNTING GP-CYLINDER
221-4265 MOUNTING GP-CYLINDER
MOUNTING GP-BANK VALVE
290-8077 MOUNTING GP-BANK VALVE
MOUNTING GP-BANK VALVE
290-8077 MOUNTING GP-BANK VALVE
MOUNTING GP-BANK VALVE
219-8564 MOUNTING GP-BANK VALVE
MOUNTING GP-BANK VALVE
219-8564 MOUNTING GP-BANK VALVE
MANIFOLD GP-RIDE CONTROL
245-8780 MANIFOLD GP-RIDE CONTROL
PUMP GP-PISTON
247-7867 PUMP GP-PISTON
PUMP GP-PISTON
296-6714 PUMP GP-PISTON
SHAFT GP-PUMP DRIVE
128-5596 SHAFT GP-PUMP DRIVE
TANK & MTG GP-HYDRAULIC
245-8777 TANK & MTG GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
245-8777 TANK & MTG GP-HYDRAULIC
VALVE & MTG GP-COUPLER
418-9152 VALVE & MTG GP-COUPLER
209-9943 VALVE AR-BANK 2
209-9944 VALVE AR-BANK 3

Truck sale:

Caterpillar 416EOEM, Construction
43,300 
Caterpillar 416EOEM, Construction
- backhoe loader
EMPIRE MACHINERY
Caterpillar 18 BUCKET FOR 416E, Construction
525 
Caterpillar 18 BUCKET FOR 416E, Construction
- bucket
KELLY TRACTOR CO.
Caterpillar 416 E, Construction
80,500 
Caterpillar 416 E, Construction
- backhoe loader
MILTON CAT
CATERPILLAR 416E 2012
 
CATERPILLAR 416E 2012
- BACKHOE LOADERS
Please Contact your local Cat Dealer
Brazil
CATERPILLAR 416E 2006
 
CATERPILLAR 416E 2006
- BACKHOE LOADERS
PETERSON TRACTOR CO