HYDRAULIC SYSTEM
MOUNTING GPCYLINDER GP
PUMP GP
TANK GP
VALVE GP-BANK
HYDRAULIC SYSTEM
MOUNTING GP
#SEBP37070530
9R-4668: MOUNTING GP-CYLINDER
9R-4668 MOUNTING GP-CYLINDER -MULTIPURPOSE BUCKET
S/N HBE1-UP
PART OF 252-9048, 252-9053, 318-7250 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
S/N HBE1-UP
PART OF 252-9048, 252-9053, 318-7250 BUCKET AR-MULTIPURPOSE
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS#SEBP37070531
246-9309: MOUNTING GP-LINES
246-9309 MOUNTING GP-LINES
S/N HBE1-UP
PART OF 229-3006, 229-3007, 229-3010 BACKHOE AR-EXTENDABLE STICK, 229-3000, 229-3001 BACKHOE AR-STANDARD STICK
Type 1
AN ATTACHMENT
S/N HBE1-UP
PART OF 229-3006, 229-3007, 229-3010 BACKHOE AR-EXTENDABLE STICK, 229-3000, 229-3001 BACKHOE AR-STANDARD STICK
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS#SEBP37070532
246-9309: MOUNTING GP-LINES
246-9309 MOUNTING GP-LINES
S/N HBE1-UP
PART OF 229-3006, 229-3007, 229-3010 BACKHOE AR-EXTENDABLE STICK, 229-3000, 229-3001 BACKHOE AR-STANDARD STICK
Type 2
AN ATTACHMENT
S/N HBE1-UP
PART OF 229-3006, 229-3007, 229-3010 BACKHOE AR-EXTENDABLE STICK, 229-3000, 229-3001 BACKHOE AR-STANDARD STICK
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 248-4277 C | [2] | PLATE | |
| (NOT REQUIRED WITH EUROPEAN MACHINES) | ||||
| -OR- | ||||
| 339-7689 C | [2] | PLATE AS | ||
| (REQUIRED WITH EUROPEAN MACHINES) | ||||
| 2. | 303-4230 | [2] | BLOCK | |
| 3. | 304-3551 | [2] | BLOCK | |
| 4. | 304-3552 | [2] | BLOCK | |
| 5. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 6. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 7. | 5P-5148 C | [2] | STRAP-CABLE | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP37070533
247-7867: PUMP GP-PISTON
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 232-3587 | [1] | KIT-BEARING (FRONT) | |
| (INCLUDES CUP & CONE) | ||||
| 2. | 232-3586 | [1] | KIT-BEARING (REAR) | |
| (INCLUDES CUP & CONE) | ||||
| 3. | 296-6715 | [1] | KIT-BEARING (PISTON PUMP) | |
| (INCLUDES BEARINGS & PINS) | ||||
| 4. | 263-5514 | [1] | SHAFT-DRIVE | |
| 5. | 260-3146 | [1] | SWASHPLATE | |
| 6. | 260-3149 | [1] | KIT-CYLINDER (PISTON PUMP) | |
| (INCLUDES PISTON AS, RETAINER, RETAINER GUIDE, PINS, BLOCK, SPRING, SPRING SEATS & RING) | ||||
| 7. | 260-3147 | [1] | PLATE | |
| 8. | 248-1348 Y | [1] | VALVE GP-CONTROL (PRESSUE, FLOW COMPENSATOR) | |
| 9. | 3J-1907 J | [1] | SEAL-O-RING | |
| 10. | 3K-0360 J | [1] | SEAL-O-RING | |
| 11. | 232-3591 J | [1] | SEAL-LIP TYPE | |
| 12. | 6J-7855 | [1] | RING-RETAINING | |
| 13. | 2M-9780 J | [2] | SEAL-O-RING | |
| 14. | 341-7656 | [1] | CAP-END | |
| 15. | 359-5232 | [1] | ROD-PISTON | |
| 16. | 307-3049 J | [1] | PLUG AS | |
| 17. | 3J-7354 J | [4] | SEAL-O-RING | |
| 18. | 6J-2245 J | [1] | SEAL-O-RING | |
| 19. | 234-4173 J | [4] | SEAL-O-RING | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
| AVAILABLE REPAIR KIT(S): | ||||
| 307-3043 J | [1] | KIT-SEAL | ||
| (INCLUDES O-RING SEALS, LIP SEALS, END CAP, PISTON RINGS, PLUG, RING SEALS & NUT) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37070534
296-6714: PUMP GP-PISTON
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 232-3587 | [1] | KIT-BEARING (AUXILIARY PUMP) | |
| 2. | 232-3586 | [1] | KIT-BEARING (AUXILIARY PUMP) | |
| (EACH KIT BEARING INCLUDES CUP & CONE) | ||||
| 3. | 296-6715 | [1] | KIT-BEARING | |
| (INCLUDES BEARING & DOWEL PIN) | ||||
| 4. | 263-5514 | [1] | SHAFT-DRIVE | |
| 5. | 260-3146 | [1] | SWASHPLATE | |
| 6. | 260-3149 | [1] | KIT-CYLINDER (PISTON PUMP) | |
| (INCLUDES PISTON AS, SLIPPER RETAINER, GUIDE, HOLD DOWN PIN, CYLINER BLOCK, SPRING SEATS, SPRING, & RETAINING RING) | ||||
| 7. | 260-3147 | [1] | PLATE | |
| 8. | 248-1348 Y | [1] | VALVE GP-CONTROL (GENERATOR PUMP) | |
| 9. | 232-3591 J | [1] | SEAL-LIP TYPE | |
| 10. | 6J-7855 | [1] | RING-RETAINING | |
| 11. | 2M-9780 J | [2] | SEAL-O-RING | |
| 12. | 3J-1907 J | [1] | SEAL-O-RING | |
| 13. | 3K-0360 J | [1] | SEAL-O-RING | |
| 14. | 8L-2777 J | [1] | SEAL-O-RING | |
| 15. | 6J-2245 J | [1] | SEAL-O-RING | |
| 16. | 3J-7354 J | [4] | SEAL-O-RING | |
| 17. | 234-4173 J | [4] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 260-3150 J | [1] | KIT-SEAL (PISTON PUMP) | ||
| (ALSO INCLUDES SEAL RING, CAP SEAL, PISTON RING, & RING BACKUP) | ||||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPERATELY | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37070535
128-5596: SHAFT GP-PUMP DRIVE
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 130-8150 | [1] | RING-RETAINING |
#SEBP37070536
245-8777: TANK & MTG GP-HYDRAULIC
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5P-4961 | [3] | CLAMP-HOSE | |
| 3. | 5P-1442 E | HOSE (124-CM) | ||
| 3A. | 5P-1442 E | HOSE (8-CM) | ||
| 5. | 9M-0164 | [1] | CLAMP-HOSE | |
| 6. | 9R-9925 | [1] | FILTER ELEMENT-BREATHER (HYDRAULIC TANK) | |
| 7. | 127-4471 | [1] | CLAMP-HOSE | |
| 8. | 132-3056 | [1] | SEAL-O-RING | |
| 9. | 210-7773 | [1] | BRACKET AS | |
| 10. | 222-4067 | [6] | BOLT-SOCKET HEAD (M5X0.8X14-MM) | |
| 11. | 234-6927 | [1] | HOSE | |
| 12. | 293-4671 | [1] | TUBE AS | |
| 13. | 235-5843 | [1] | DIFFUSER AS | |
| 14. | 237-3797 | [1] | CAP-FILL (HYDRAULIC OIL) | |
| 15. | 245-8778 Y | [1] | TANK GP-HYDRAULIC | |
| 16. | 217-8185 | [1] | ELBOW AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9X-3982 | [1] | ELBOW | ||
| 17. | 6D-3479 | [1] | CLIP (LOOP) | |
| 18. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 20. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 21. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 22. | 8T-4179 M | [3] | BOLT (M12X1.75X20-MM) | |
| 23. | 8T-4191 M | [4] | BOLT (M10X1.5X16-MM) | |
| 24. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37070537
245-8778: TANK GP-HYDRAULIC
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS#SEBP37070538
230-4940: VALVE AR-BANK 2
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 206-1645 Y | [1] | CONTROL GP-HYDRAULIC HAND (LOADER) | ||
| 219-8566 Y | [1] | FASTENER GP-VALVE (BANK) | ||
| 246-5293 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 246-5292 Y | [1] | LINES GP-TILT CYLINDER | ||
| 248-0481 Y | [1] | VALVE GP-BANK 2 | ||
| 251-5625 | [1] | FILM-INSTRUCTION (BUCKET CONTROL) | ||
| (ON RH CONSOLE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP37070539
230-4942: VALVE AR-BANK 3
For full view, you need register
Parts for your 422E BACKHOE LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 209-3364 Y | [1] | CONTROL GP-HYDRAULIC HAND (LOADER) | ||
| 219-8566 Y | [1] | FASTENER GP-VALVE (BANK) | ||
| 246-5293 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 246-8478 Y | [1] | LINES GP-LOADER AUXILIARY | ||
| 246-5292 Y | [1] | LINES GP-TILT CYLINDER | ||
| 248-0482 Y | [1] | VALVE GP-BANK 3 | ||
| 251-5626 | [1] | FILM-INSTRUCTION (BUCKET CONTROL) | ||
| (ON RH CONSOLE) | ||||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 422E :
Truck sale:
$23,594 USD
