AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

211-4248 WIRING GP-ENGINE S/N EAT1-UP PART OF 213-9275 COMMON AR Type 1 430E BACKHOE LOADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP

BACKHOE LOADER 430E BACKHOE LOADER EAT
 430E Backhoe Loader Center Pivot EAT00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3708 430E EAT   (2006)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-CONTROL
267-5634 WIRING GP-CONTROL
WIRING GP-CONTROL
267-5635 WIRING GP-CONTROL
WIRING GP-ENGINE
211-4248 WIRING GP-ENGINE
WIRING GP-ENGINE
211-4248 WIRING GP-ENGINE
WIRING GP-ENGINE
263-9483 WIRING GP-ENGINE
WIRING GP-EXTENDABLE STICK
230-7514 WIRING GP-EXTENDABLE STICK
 

#SEBP37080180
 

211-4248: WIRING GP-ENGINE

211-4248 WIRING GP-ENGINE
S/N EAT1-UP
PART OF 213-9275 COMMON AR
Type 1
i02121182 SEBP3708
2114248 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-4818 [1] LOCKWASHER (EXTERNAL TOOTH)  
2. 7K-1181 [16] STRAP-CABLE  
3. 7Y-3883 [1] CABLE AS  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(40-CM)  
4. 189-3158 [4] SUPPRESSOR-ARC  
5. 164-9425 [1] HORN AS (12-VOLT, LOW TONE)  
6. 235-8747 [1] SWITCH-TEMPERATURE (ENGINE COOLANT)  
7. 238-9397 [1] RESISTOR AS  
8. 244-3106 [1] SENDER AS-TEMPERATURE (12V)(ENGINE COOLANT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
9. 246-8051 [1] HARNESS AS-ENGINE  
10. 251-9570 [1] PLATE AS  
11. 274-3774 [2] CAP-CONNECTOR  
12. 115-1615 [1] RELAY AS (12-VOLT)(FUEL PUMP)  
12A. 115-1615 [1] RELAY AS (12-VOLT)(START)  
12B. 115-1615 [1] RELAY AS (12-VOLT)(STARTING AID)  
13. 199-9751 [1] SEAL-O-RING  
14. 3S-2093 [24] STRAP-CABLE  
15. 4P-7581 [9] CLIP (LADDER)  
16. 4P-8134 [7] CLIP (LADDER)  
17. 5C-2874 M [2] NUT (M5X0.8-THD)  
18. 8F-1434 [2] LOCKWASHER  
19. 8F-3590 [1] LOCKWASHER  
20. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
21. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
23. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
24. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
25. 8T-4171 M [3] BOLT (M6X1X12-MM)  
26. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
27. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
28. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-5093 M [1] BOLT-LOCKING (M8X1.25X25-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37080181
 

211-4248: WIRING GP-ENGINE

211-4248 WIRING GP-ENGINE
S/N EAT1-UP
PART OF 213-9275 COMMON AR
Type 2
i03384084 SEBP3708
2114248 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 C [14] STRAP-CABLE  
2. 7Y-3883 [1] CABLE AS  
  1S-7251 [2] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(40-CM)  
3. 164-9425 [1] HORN AS (12-VOLT, LOW TONE)  
4. 189-3158 C [1] SUPPRESSOR-ARC  
5. 235-8747 [1] SWITCH-TEMPERATURE (ENGINE COOLANT)  
6. 244-3106 [1] SENDER AS-TEMPERATURE (12V)(ENGINE COOLANT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 246-8051 [1] HARNESS AS-ENGINE  
  3S-2093 [41] STRAP-CABLE  
  6V-0491 [4] TERMINAL-BLADE (14-GA TO 18-GA)  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
  9X-1054 [3] PLUG AS-CONNECTOR (4-PIN)  
  9X-1055 [6] TERMINAL-RECEPTACLE (12-GA)  
  100-5041 [6] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  100-6674 [2] SEAL-CONNECTOR  
  9W-0844 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  123-7615 [2] CONNECTOR (1-PIN)  
  124-5640 [2] TERMINAL-SOCKET  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)  
  5P-1478 [1] TERMINAL-FORK (10-GA TO 12-GA, NO. 10 SCREW)  
  128-4172 [1] TERMINAL AS-RING (6-GA TO 8-GA)  
  6V-9023 E TUBE-HEAT SHRINK (12.7-MM DIA)(4-CM)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  7N-7221 [1] TERMINAL-BLADE (18-GA TO 22-GA)  
  7N-9017 [3] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [19] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  167-3693 [1] PLUG AS-CONNECTOR (31-PIN)  
  180-9340 [69] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  189-3158 [3] SUPPRESSOR-ARC  
  238-9397 [1] RESISTOR AS  
  274-3774 [5] CAP-CONNECTOR  
8. 251-9570 [1] PLATE AS  
9. 115-1615 [1] RELAY AS (12-VOLT)(FUEL PUMP)  
9A. 115-1615 [1] RELAY AS (12-VOLT)(START)  
9B. 115-1615 [1] RELAY AS (12-VOLT)(STARTING AID)  
10. 199-9751 [1] SEAL-O-RING  
11. 3J-4818 [2] LOCKWASHER (EXTERNAL TOOTH)  
12. 3S-2093 C [29] STRAP-CABLE  
13. 4P-7581 [9] CLIP (LADDER)  
14. 4P-8134 [7] CLIP (LADDER)  
15. 5C-2874 M [2] NUT (M5X0.8-THD)  
16. 8F-1434 [2] LOCKWASHER  
17. 8F-3590 [1] LOCKWASHER  
18. 8T-0328 [2] WASHER-HARD (5.5X10X1-MM THK)  
19. 8T-4121 [11] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
21. 8T-4137 M [7] BOLT (M10X1.5X20-MM)  
22. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
23. 8T-4171 M [3] BOLT (M6X1X12-MM)  
24. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
25. 8T-4205 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
26. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 8T-5093 M [1] BOLT-LOCKING (M8X1.25X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP37080182
 

263-9483: WIRING GP-ENGINE

263-9483 WIRING GP-ENGINE
S/N EAT1-UP
PART OF 269-2126, 269-2127 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i02447141 SEBP3708
2639483 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-0404 [1] SWITCH AS-PRESSURE (HYDRAULIC OIL FILTER BYPASS)  
2. 250-1448 [1] CONNECTOR  
3. 263-9484 [1] HARNESS AS-SENSOR (PLATFORM)  
4. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)  
  137-6645 [1] PAD-CONNECTOR  
5. 273-3284 [1] INDICATOR AS (HYD OIL TEMP, FILTER)  
  111-7899 [1] GASKET  
6. 3J-1907 [1] SEAL-O-RING  
7. 3K-0360 [1] SEAL-O-RING  
8. 3S-2093 [4] STRAP-CABLE  
9. 4P-7581 [1] CLIP (LADDER)  
 

#SEBP37080183
 

230-7514: WIRING GP-EXTENDABLE STICK

230-7514 WIRING GP-EXTENDABLE STICK
S/N EAT1-UP
PART OF 271-1403 STICK GP-EXTENDABLE
AN ATTACHMENT
i02121687 SEBP3708
2307514 WIRING GP-EXTENDABLE STICK Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 290-6811 [1] HARNESS AS-WIRING (EXTENDABLE STICK)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  6V-8523 E HOSE (255-CM)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
2. 3S-2093 [4] STRAP-CABLE  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP37080184
 

246-8042: WIRING GP-GRADE CONTROL

246-8042 WIRING GP-GRADE CONTROL
S/N EAT1-1304
PART OF 213-9309, 291-9207 BACKHOE AR-EXTENDABLE STICK, 213-9306, 291-9206 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
i02121309 SEBP3708
2468042 WIRING GP-GRADE CONTROL Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0599 [1] CLAMP-BAND  
2. 5P-3860 [2] CLAMP-HOSE  
3. 9R-2053 [3] BLOCK  
4. 177-2215 B [11] STRAP-DUAL CLAMP  
5. 268-7761 [1] HARNESS AS-PLATFORM (DISPLAY)  
  6V-8523 E HOSE (124-CM)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [16] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [8] PLUG-SEAL  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUEDS RECEPTACLE AS & WEDGE)
  9W-0844 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  180-9340 [18] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [3] STRAP-CABLE (WHITE)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(5-CM)  
6. 1S-6420 [1] CLIP  
7. 3S-2093 [24] STRAP-CABLE  
9. 4P-7581 [1] CLIP (LADDER)  
10. 7K-1181 [12] STRAP-CABLE  
12. 232-1792 [1] HORN (24-VOLT TO 12-VOLT)  
13. 290-6804 [1] HARNESS AS-SENSOR (SWING)  
  5P-0767 E HOSE (208-CM)  
  9X-3401 E [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUEDS RECEPTACLE AS & WEDGE)
  180-9340 [6] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
14. 290-6805 [1] HARNESS AS-SENSOR (BOOM, STICK, BUCKET)  
  5P-0767 E HOSE (107-CM)  
  6V-8523 E HOSE (105-CM)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2271 [4] KIT-CONNECTING PLUG (4-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUEDS RECEPTACLE AS & WEDGE)
  180-9340 [12] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
15. 305-3103 [1] GUARD  
16. 305-3104 [2] SLEEVE-ABRASION  
17. 305-3102 B [6] GUARD  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP37080185
 

246-8042: WIRING GP-GRADE CONTROL

246-8042 WIRING GP-GRADE CONTROL
S/N EAT1305-UP
PART OF 213-9309, 291-9207 BACKHOE AR-EXTENDABLE STICK, 213-9306, 291-9206 BACKHOE AR-STANDARD STICK
AN ATTACHMENT
i03097760 SEBP3708
2468042 WIRING GP-GRADE CONTROL Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-0599 [1] CLAMP-BAND  
2. 5P-3860 [2] CLAMP-HOSE  
3. 9R-2053 [3] BLOCK  
4. 177-2215 B [11] STRAP-DUAL CLAMP  
5. 268-7761 [1] HARNESS AS-PLATFORM (DISPLAY)  
  6V-8523 E HOSE (124-CM)  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-3401 [16] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [16] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [8] PLUG-SEAL  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  9W-0844 [1] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  180-9340 [18] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [3] STRAP-CABLE (WHITE)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(35-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
6. 1S-6420 [1] CLIP  
7. 3S-2093 [24] STRAP-CABLE  
9. 4P-7581 [1] CLIP (LADDER)  
10. 7K-1181 [12] STRAP-CABLE  
12. 232-1792 [1] HORN (24-VOLT TO 12-VOLT)  
13. 290-6804 [1] HARNESS AS-SENSOR (SWING)  
  7I-1024 E GUARD-HOSE (164-CM)  
  5P-0767 E HOSE (208-CM)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [6] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  1P-0810 B TAPE-ELECTRICAL  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
14. 290-6805 [1] HARNESS AS-SENSOR (BOOM, STICK, BUCKET)  
  5P-0767 E HOSE (107-CM)  
  6V-8523 E HOSE (105-CM)  
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [6] PIN-CONNECTOR (14-GA TO 16-GA)  
  155-2271 [4] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [4] PLUG-SEAL  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [12] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
16. 305-3104 [2] SLEEVE-ABRASION  
17. 305-3102 B [6] GUARD  
18. 212-3416 C [3] SCREW-PAN HEAD (8-16X0.5-IN)  
19. 206-1649 C [1] BRACKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
 

#SEBP37080186
 

211-4269: WIRING GP-HEATER

211-4269 WIRING GP-HEATER
S/N EAT1-UP
PART OF 269-2125, 269-2126 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
i02098562 SEBP3708
2114269 WIRING GP-HEATER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-6055 [1] HARNESS AS-HEATER & AIR COND (PLATFORM)  
  228-5856 [2] CONNECTOR (10-PIN)  
  213-0139 [5] PIN (4-MM)  
  9X-3401 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
    -OR-
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  177-9648 [1] KIT-CONNECTING PLUG (2-PIN)  
  177-9656 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [1] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  8L-8413 [29] STRAP-CABLE (WHITE)  
  122-4401 [1] TERMINAL  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8067 [1] TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)  
  091-2436 [7] TERMINAL-BLADE (18-GA TO 22-GA)  
  104-1995 [11] TERMINAL-BLADE (14-GA TO 18-GA)  
  9X-1055 [2] TERMINAL-RECEPTACLE (12-GA)  
  100-5041 [2] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
2. 214-4695 [1] SWITCH AS-ROCKER (BLOWER FAN SPEED)  
3. 214-4703 [1] SWITCH AS-ROCKER (HEATER)  
    (EACH SWITCH AS INCLUDES)
  111-7899 [1] GASKET  
4. 275-0570 [1] BAR-BUS  
5. 276-7287 Y [1] RELAY GP (12-VOLT)(POWER DISTRIBUTION)  
6. 115-1615 [1] RELAY AS (12-VOLT)(AIR CONDITIONER)  
7. 3S-2093 [8] STRAP-CABLE  
8. 5C-2890 M [1] NUT (M6X1-THD)  
9. 5C-7261 M [1] NUT (M8X1.25-THD)  
10. 8T-9534 M [1] BOLT (M6X1X50-MM)  
11. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
13. 8T-8799 [1] BOOT (RED)  
14. 8T-4171 M [1] BOLT (M6X1X12-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37080187
 

211-4262: WIRING GP-KICKOUT & POSITIONER

211-4262 WIRING GP-KICKOUT & POSITIONER
S/N EAT1-UP
PART OF 213-9300 LOADER AR
Type 1
i02095350 SEBP3708
2114262 WIRING GP-KICKOUT & POSITIONER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-7790 [1] BRACKET AS  
2. 206-1486 [1] SWITCH AS-ROLLER (KICKOUT, POSITIONER)  
  2H-3922 [1] LOCKWASHER  
  6V-8363 [2] SCREW (10-32X0.312-IN)  
  6V-8370 [1] NUT-HEX (3/4-32-THD)  
  8F-1434 [2] LOCKWASHER  
  9X-0199 [1] BOOT-SWITCH  
3. 233-7977 [1] HARNESS AS-WIRING (KICKOUT, POSITIONER)  
4. 3S-2093 [31] STRAP-CABLE  
5. 8T-4138 M [2] BOLT (M6X1X20-MM)  
6. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 225-7992 [1] HARNESS AS-WIRING (KICKOUT, POSITIONER)  
8. 9X-7344 [1] GROMMET  
9. 160-2245 G SLEEVE-ABRASION (12-IN)  
  G   ORDER BY THE INCH
  M   METRIC PART
 

#SEBP37080188
 

211-4262: WIRING GP-KICKOUT & POSITIONER

211-4262 WIRING GP-KICKOUT & POSITIONER
S/N EAT1-UP
PART OF 213-9300 LOADER AR
Type 2
i02536785 SEBP3708
2114262 WIRING GP-KICKOUT & POSITIONER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-7790 [1] BRACKET AS  
2. 206-1486 [1] SWITCH AS-ROLLER (KICKOUT, POSITIONER)  
  2H-3922 [1] LOCKWASHER  
  6V-8363 [2] SCREW (10-32X0.312-IN)  
  6V-8370 [1] NUT-HEX (3/4-32-THD)  
  8F-1434 [2] LOCKWASHER  
  9X-0199 [1] BOOT-SWITCH  
3. 233-7977 [1] HARNESS AS-WIRING (KICKOUT, POSITIONER)  
4. 3S-2093 [31] STRAP-CABLE  
5. 8T-4138 M [2] BOLT (M6X1X20-MM)  
6. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 225-7992 [1] HARNESS AS-WIRING (KICKOUT, POSITIONER)  
8. 9X-7344 [1] GROMMET  
9. 160-2246 CG SLEEVE-ABRASION (12-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  G   ORDER BY THE INCH
  M   METRIC PART
 

#SEBP37080189
 

211-4262: WIRING GP-KICKOUT & POSITIONER

211-4262 WIRING GP-KICKOUT & POSITIONER
S/N EAT1-UP
PART OF 213-9300 LOADER AR
Type 3
i02676092 SEBP3708
2114262 WIRING GP-KICKOUT & POSITIONER Parts scheme
  For full view, you need register

Parts for your 430E BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 118-7790 [1] BRACKET AS  
2. 206-1486 [1] SWITCH AS-ROLLER (KICKOUT, POSITIONER)  
  2H-3922 [1] LOCKWASHER  
  6V-8363 [2] SCREW (10-32X0.312-IN)  
  6V-8370 [1] NUT-HEX (3/4-32-THD)  
  8F-1434 [2] LOCKWASHER  
  9X-0199 [1] BOOT-SWITCH  
3. 233-7977 [1] HARNESS AS-WIRING (KICKOUT, POSITIONER)  
  6V-8523 E HOSE (453-CM)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  5P-1476 [2] TERMINAL-FORK (14-GA TO 16-GA, NO. 10 SCREW)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
4. 3S-2093 [35] STRAP-CABLE  
5. 8T-4138 M [2] BOLT (M6X1X20-MM)  
6. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 290-6801 C [1] HARNESS AS-WIRING (RETURN TO DIG)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (ECAH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  8T-8737 [1] PLUG-SEAL  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [6] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  189-3158 [1] SUPPRESSOR-ARC  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
8. 9X-7344 [1] GROMMET  
9. 160-2246 G SLEEVE-ABRASION (11.9-IN)  
10. 7K-1181 C [1] STRAP-CABLE  
11. 6K-0806 [2] STRAP-CABLE  
12. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
13. 4P-7429 [1] CLIP (LADDER)  
14. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
15. 205-9920 [1] STRAP-CABLE  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  G   ORDER BY THE INCH
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3054C Engines for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog 430E :

WIRING GP-CONTROL
267-5635 WIRING GP-CONTROL
WIRING GP-CONTROL
267-5634 WIRING GP-CONTROL
WIRING GP-CONTROL
267-5633 WIRING GP-CONTROL
WIRING GP-CONSOLE
290-6803 WIRING GP-CONSOLE
WIRING GP-CONSOLE
211-4245 WIRING GP-CONSOLE
WIRING GP-CONSOLE
211-4241 WIRING GP-CONSOLE
WIRING GP-AIR CONDITIONER
211-4268 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
211-4268 WIRING GP-AIR CONDITIONER
WIRING GP-ENGINE
211-4248 WIRING GP-ENGINE
WIRING GP-ENGINE
263-9483 WIRING GP-ENGINE
WIRING GP-EXTENDABLE STICK
230-7514 WIRING GP-EXTENDABLE STICK
WIRING GP-GRADE CONTROL
246-8042 WIRING GP-GRADE CONTROL
WIRING GP-GRADE CONTROL
246-8042 WIRING GP-GRADE CONTROL
WIRING GP-HEATER
211-4269 WIRING GP-HEATER
WIRING GP-KICKOUT & POSITIONER
211-4262 WIRING GP-KICKOUT & POSITIONER
WIRING GP-KICKOUT & POSITIONER
211-4262 WIRING GP-KICKOUT & POSITIONER

Truck sale:

 
69,000 
Caterpillar 430EST, Construction
- backhoe loader
IIASA - IMPORTADORA INDUSTR. AGRICOLA SA
Ecuador
Caterpillar 430EST, Construction
39,500 
Caterpillar 430EST, Construction
- backhoe loader
HOLT OF CALIFORNIA
Caterpillar 430EST, Construction
38,000 
Caterpillar 430EST, Construction
- backhoe loader
QUINN COMPANY
Caterpillar 430EST, Construction
38,000 
Caterpillar 430EST, Construction
- backhoe loader
QUINN COMPANY
Caterpillar 430E EMPTH, Construction
91,500 
Caterpillar 430E EMPTH, Construction
- backhoe loader
WHEELER MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.