SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOLCHARTS & FILMS
GASKET & SEAL KITS
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOL
#SEBP37431650
276-4214: BOX GP-TOOL
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-1384 | [1] | BUMPER-CONICAL | |
| 2. | 326-0610 N | [1] | LATCH AS | |
| 1H-3244 | [4] | LOCKWASHER | ||
| 095-1207 M | [2] | NUT (M12X1.75-THD) | ||
| 326-0612 | [2] | WASHER-TAB | ||
| 344-5673 M | [4] | NUT (M6X1-THD) | ||
| 3. | 305-3159 | [1] | PAWL | |
| 4. | 245-3839 | [1] | BOX AS-TOOL | |
| 8T-2321 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 5. | 245-3842 | [1] | SHEET | |
| 6. | 435-4353 | [1] | ANGLE AS (LH) | |
| 7. | 435-4349 | [1] | ANGLE AS (RH) | |
| 8. | 5P-1076 | [12] | WASHER-HARD (13.5X30X4-MM THK) | |
| 9. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4139 M | [6] | BOLT (M12X1.75X30-MM) | |
| 11. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-4192 M | [6] | BOLT (M12X1.75X25-MM) | |
| 13. | 3E-6602 E | SEAL (19-CM EACH) | ||
| 13A. | 3E-6602 E | SEAL (43.8-CM EACH) | ||
| 14. | 110-8457 | [1] | BOOT | |
| 15. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| ****STANDARD REMOVAL**** | ||||
| 245-3928 FJ | BOX GP-TOOL | |||
| E | ORDER BY THE CENTIMETER | |||
| F | NOT SHOWN | |||
| J | PART OF STANDARD CHASSIS AR | |||
| M | METRIC PART | |||
| N | REQUIRES CORPORATE KEY | |||
#SEBP37431651
243-0445: FILM GP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | FILM-STRIPE (CAT 966H, LH) | ||
| 2. | [1] | FILM-STRIPE (HOOD, LH REAR) | ||
| 3. | [1] | FILM-STRIPE (HOOD, RH REAR) | ||
| 4. | [1] | FILM-STRIPE (CAT 966H, RH) | ||
| 5. | 206-6305 | [2] | FILM-STRIPE (RED REFLECTIVE)(13.5-CM EACH) | |
| 6. | 209-0516 | [1] | FILM-IDENTIFICATION (CATERPILLAR, FRONT WINDOW) | |
| 7. | 197-4859 | [1] | FILM-IDENTIFICATION (CATERPILLAR, REAR CAB) | |
| 8. | 253-0861 | [1] | FILM-INFORMATION (CAT POWER, ACERT TECHNOLOGY) | |
#SEBP37431652
297-0938: FILM GP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-4930 E | FILM-STRIPE (RED REFLECTIVE)(13.5-CM EACH) | ||
| 2. | 197-4859 | [1] | FILM-IDENTIFICATION (CATERPILLAR, REAR CAB) | |
| 3. | 209-0516 | [1] | FILM-IDENTIFICATION (CATERPILLAR, FRONT WINDOW) | |
| 4. | 253-0861 | [2] | FILM-INFORMATION (CAT POWER, ACERT TECHNOLOGY) | |
| 5. | [1] | FILM-IDENTIFICATION (CAT 966H, RH) | ||
| 6. | [1] | FILM-IDENTIFICATION (CAT 966H, LH) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP37431653
343-6179: FILM GP
343-6179 FILM GP
S/N A6D1-UP
S/N A6D1-UP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 225-4130 | [2] | FILM-WARNING (FLYING DEBRIS, STAY BACK, U.S.) |
#SEBP37431654
382-0800: FILM GP
382-0800 FILM GP -FOREST MACHINE
S/N A6D1-UP
S/N A6D1-UP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 381-9078 | [2] | FILM-IDENTIFICATION (FOREST MACHINE) |
#SEBP37431655
382-0801: FILM GP
382-0801 FILM GP -SCRAP HANDLER
S/N A6D1-UP
S/N A6D1-UP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 381-9077 | [2] | FILM-IDENTIFICATION (SCRAP HANDLER) |
#SEBP37431656
382-0802: FILM GP
382-0802 FILM GP -WASTE HANDLER
S/N A6D1-UP
S/N A6D1-UP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 381-9075 | [2] | FILM-IDENTIFICATION (WASTE HANDLER) |
#SEBP37431657
315-6672: KIT-GASKET
315-6672 KIT-GASKET
S/N A6D1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD REPLACEMENT ORDER @@@@@363-6420@@@@@
S/N A6D1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE REAR COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD REPLACEMENT ORDER @@@@@363-6420@@@@@
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4N-1059 | [1] | GASKET | ||
| 7C-1583 | [1] | GASKET | ||
| 7C-1728 | [1] | SEAL-CRANKSHAFT (REAR) | ||
| 1H-5728 | [1] | SEAL-O-RING | ||
| 1J-9671 | [1] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 5D-9344 | [1] | SEAL-O-RING | ||
| 5P-7814 | [1] | SEAL-O-RING | ||
| 107-6280 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT: | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
#SEBP37431658
325-1636: KIT-GASKET
325-1636 KIT-GASKET -TURBOCHARGER
S/N A6D1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBOCHARGER(S) AND ATTACHED LINES. THE FOLLOWING TURBOCHARGER MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBOCHARGER KIT PART NUMBER 317-8751-UP
FIELD REPLACEMENT ORDER @@@@@363-4540@@@@@
S/N A6D1-UP
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBOCHARGER(S) AND ATTACHED LINES. THE FOLLOWING TURBOCHARGER MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBOCHARGER KIT PART NUMBER 317-8751-UP
FIELD REPLACEMENT ORDER @@@@@363-4540@@@@@
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 197-8418 | [1] | GASKET | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 274-6851 | [1] | GASKET-TURBOCHARGER | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 8C-3089 | [1] | SEAL-O-RING | ||
| 033-5853 | [1] | SEAL-O-RING | ||
| 225-6948 | [1] | SEAL-O-RING | ||
| 9X-8281 M | [4] | STUD-TAPERLOCK (M10X1.5X45-MM) | ||
| M | METRIC PART | |||
#SEBP37431659
325-1830: KIT-GASKET
325-1830 KIT-GASKET
S/N A6D1-UP
KIT CONTAINS GASKET, SEALS, BENDABLE LOCKS TO REINSTALL SINGLE CYLINDER HEAD.. ALSO INCLUDES TURBO MOUNTING HARDWARE: BOLTS, NUTS, WASHERS,STUDS AND SPACERS.
FIELD REPLACEMENT ORDER 436-8428 KIT-GASKET (SCH)
FOR USE WITH @@@@@234-7850@@@@@, @@@@@234-7850@@@@@, DV147- ENGINE ARRANGEMENT S/N RSX 1-1316, MACHINE S/N FMW 1-UP, TT149- ENGINE ARRANGEMENT S/N RSX 1-1316, MACHINE S/N A6D 1-UP
S/N A6D1-UP
KIT CONTAINS GASKET, SEALS, BENDABLE LOCKS TO REINSTALL SINGLE CYLINDER HEAD.. ALSO INCLUDES TURBO MOUNTING HARDWARE: BOLTS, NUTS, WASHERS,STUDS AND SPACERS.
FIELD REPLACEMENT ORDER 436-8428 KIT-GASKET (SCH)
FOR USE WITH @@@@@234-7850@@@@@, @@@@@234-7850@@@@@, DV147- ENGINE ARRANGEMENT S/N RSX 1-1316, MACHINE S/N FMW 1-UP, TT149- ENGINE ARRANGEMENT S/N RSX 1-1316, MACHINE S/N A6D 1-UP
For full view, you need register
Parts for your 966H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 197-8418 | [1] | GASKET | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 221-9392 | [1] | GASKET | ||
| 283-2238 | [6] | GASKET | ||
| 230-3518 | [1] | GASKET-MANIFOLD | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 224-6361 | [1] | SEAL | ||
| 227-5075 | [1] | SEAL | ||
| 272-0389 | [1] | SEAL | ||
| 3S-9643 | [1] | SEAL-LIP TYPE (REGULATOR HOUSING) | ||
| 2M-9780 | [2] | SEAL-O-RING | ||
| 3J-1907 | [4] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3K-0360 | [2] | SEAL-O-RING | ||
| 5P-5598 | [1] | SEAL-O-RING | ||
| 6V-5048 | [3] | SEAL-O-RING | ||
| 6V-5063 | [5] | SEAL-O-RING | ||
| 6V-6353 | [1] | SEAL-O-RING | ||
| 6V-6609 | [5] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-9027 | [2] | SEAL-O-RING | ||
| 7L-6580 | [2] | SEAL-O-RING | ||
| 8C-3089 | [1] | SEAL-O-RING | ||
| 8L-2777 | [6] | SEAL-O-RING | ||
| 8L-2786 | [1] | SEAL-O-RING | ||
| 9X-7380 | [1] | SEAL-O-RING | ||
| 9X-7430 | [6] | SEAL-O-RING | ||
| 033-5853 | [1] | SEAL-O-RING | ||
| 166-2904 | [12] | SEAL-O-RING | ||
| 189-9377 | [1] | SEAL-O-RING | ||
| 214-7568 | [10] | SEAL-O-RING | ||
| 225-6948 | [1] | SEAL-O-RING | ||
| 228-7089 | [1] | SEAL-O-RING | ||
| 229-5711 | [1] | SEAL-VALVE COVER | ||
| 163-2478 | [24] | SEAL-VALVE STEM | ||
| 9X-8281 M | [4] | STUD-TAPERLOCK (M10X1.5X45-MM) | ||
| 212-7728 | [10] | ISOLATOR AS | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE LIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
Information:
SERVICE EQUIPMENT AND SUPPLIES
BOX GP-TOOL
Service Magazine
