AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

282-3069 LINKAGE AR-FELLING HEAD S/N 1031235-UP AN ATTACHMENT TK722 TRACK FELLER BUNCHER


IMPLEMENTS
LINKAGE GP
STICK GP

TRACK FELLER BUNCHER TK722 TRACK FELLER BUNCHER 103
 TK722 Track Feller Buncher 10300001-UP (MACHINE) POWERED BY C-9 Engine SEBP3752 TK722 103   (2001)

IMPLEMENTS

LINKAGE GP
LINKAGE AR-FELLING HEAD
212-8010 LINKAGE AR-FELLING HEAD
LINKAGE AR-FELLING HEAD
282-3069 LINKAGE AR-FELLING HEAD
LINKAGE AR-HARVESTER HEAD
218-2974 LINKAGE AR-HARVESTER HEAD
246-6201 LINKAGE AR-HARVESTER HEAD
LINKAGE AR-HARVESTER HEAD
252-8713 LINKAGE AR-HARVESTER HEAD
LINKAGE AR-HARVESTER HEAD
282-3012 LINKAGE AR-HARVESTER HEAD
LINKAGE AR-INTERMITTENT SAW
252-8717 LINKAGE AR-INTERMITTENT SAW
LINKAGE GP-FELLING HEAD
212-8014 LINKAGE GP-FELLING HEAD
 

#SEBP37520470
 

282-3069: LINKAGE AR-FELLING HEAD

282-3069 LINKAGE AR-FELLING HEAD
S/N 1031235-UP
AN ATTACHMENT
i02438670 SEBP3752
2823069 LINKAGE AR-FELLING HEAD Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-8011 Y [1] BOOM GP  
2. 212-8012 Y [1] STICK GP (FELLING HEAD)  
3. 212-8014 Y [1] LINKAGE GP-FELLING HEAD  
4. 212-8018 Y [1] WIRING GP-BOOM (FLOODLIGHTS)  
5. 217-9703 Y [1] LINES GP-STICK  
6. 217-9705 Y [1] LINES GP-BOOM (FELLING HEAD)  
7. 218-1917 Y [1] LINES GP-GREASE (BOOM, STICK)  
8. 282-3102 Y [1] LINES GP-FRONT (BOOM, FELLING HEAD)  
9. 282-3108 Y [1] LINES GP-MOTOR  
10. 282-3109 Y [1] CYLINDER & MTG GP-STICK & SAW (HARVESTER HEAD, LH)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520471
 

218-2974: LINKAGE AR-HARVESTER HEAD

218-2974 LINKAGE AR-HARVESTER HEAD
S/N 1031-UP
CANNOT BE USED WITH @@@@@212-8010@@@@@
AN ATTACHMENT
i01844161 SEBP3752
2182974 LINKAGE AR-HARVESTER HEAD Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-8011 Y [1] BOOM GP  
2. 212-8016 Y [1] STICK GP (HARVESTER HEAD)  
3. 217-9698 Y [1] VALVE & MTG GP-MAIN CONTROL (5-BANK, HARVESTER HEAD)  
4. 217-9702 Y [1] CYLINDER AR-HYDRAULIC (BOOM, STICK)  
5. 217-9704 Y [1] LINES GP-STICK  
6. 217-9706 Y [1] LINES GP-BOOM  
7. 217-9708 Y [1] LINES GP-FRONT  
8. 218-1918 Y [1] LINES GP-GREASE (BOOM)  
9. 222-3097 Y [1] PUMP & MTG GP-MAIN HYDRAULIC (HARVESTER HEAD)  
10. 223-0671 Y [1] CONTROL & MTG GP-JOYSTICK (HARVESTER HEAD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520472
 

246-6201: LINKAGE AR-HARVESTER HEAD

246-6201 LINKAGE AR-HARVESTER HEAD
S/N 1031-UP
AN ATTACHMENT
i02228933 SEBP3752
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  223-0671 Y [1] CONTROL & MTG GP-JOYSTICK (HARVESTER HEAD)  
  217-9702 Y [1] CYLINDER AR-HYDRAULIC (BOOM, STICK)  
  217-9708 Y [1] LINES GP-FRONT  
  222-3097 Y [1] PUMP & MTG GP-MAIN HYDRAULIC (HARVESTER HEAD)  
  217-9698 Y [1] VALVE & MTG GP-MAIN CONTROL (5-BANK, HARVESTER HEAD)  
  150-3073 [3] PLUG AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-9512 [1] PLUG (1-7/16-12-THD)  
  164-5581 [8] PLUG AS  
    (EACH INCLUDES)
  6V-9511 [1] PLUG (1-3/16-12-THD)  
  6V-9746 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520473
 

252-8713: LINKAGE AR-HARVESTER HEAD

252-8713 LINKAGE AR-HARVESTER HEAD
S/N 1031-UP
FOR USE WITH HEAD THAT WEIGHS NO MORE THAN 5500-POUNDS AND HAS A MAXIMUM CUT CAPACITY OF 23-INCHES
CANNOT BE USED WITH @@@@@212-8010@@@@@, @@@@@242-5335@@@@@, @@@@@246-6201@@@@@, @@@@@218-2974@@@@@, @@@@@252-8717@@@@@
AN ATTACHMENT
i02228954 SEBP3752
2528713 LINKAGE AR-HARVESTER HEAD Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 217-9697 Y [1] VALVE & MTG GP-MAIN CONTROL (7-BANK)  
2. 217-9700 Y [1] PUMP & MTG GP-MAIN HYDRAULIC (FELLING HEAD)  
3. 223-0671 Y [1] CONTROL & MTG GP-JOYSTICK (HARVESTER HEAD)  
4. 226-5001 Y [1] BOOM GP  
5. 226-5002 Y [1] STICK GP (HARVESTER HEAD)  
6. 248-6874 Y [1] CYLINDER AR-HYDRAULIC (BOOM, STICK)  
7. 253-2602 Y [1] LINES GP-STICK  
8. 253-2603 Y [1] LINES GP-BOOM (HARVESTER HEAD)  
9. 253-2604 Y [1] LINES GP-FRONT (BOOM, HARVESTER HEAD)  
10. 253-2605 Y [1] LINES GP-GREASE (BOOM, STICK)  
11. 253-2606 Y [1] WIRING GP-BOOM (FLOODLIGHTS)  
12. 253-2607 Y [1] LINES GP-SAW  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520474
 

282-3012: LINKAGE AR-HARVESTER HEAD

282-3012 LINKAGE AR-HARVESTER HEAD
S/N 1031235-UP
AN ATTACHMENT
i02444232 SEBP3752
2823012 LINKAGE AR-HARVESTER HEAD Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 226-5001 Y [1] BOOM GP  
2. 226-5002 Y [1] STICK GP (HARVESTER HEAD)  
3. 253-2602 Y [1] LINES GP-STICK  
4. 253-2603 Y [1] LINES GP-BOOM (HARVESTER HEAD)  
5. 253-2605 Y [1] LINES GP-GREASE (BOOM, STICK)  
6. 253-2606 Y [1] WIRING GP-BOOM (FLOODLIGHTS)  
7. 282-3013 Y [1] CYLINDER & MTG GP-STICK  
8. 282-3065 Y [1] LINES GP-FRONT (BOOM, HARVESTER HEAD)  
9. 354-8192 [1] GUARD GP-LINES  
  5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
  8T-4194 M [4] BOLT (M12X1.75X50-MM)  
  349-6105 [1] PLATE  
  354-8191 [1] SEAL  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520475
 

252-8717: LINKAGE AR-INTERMITTENT SAW

252-8717 LINKAGE AR-INTERMITTENT SAW
S/N 1031-UP
FOR USE WITH HEAD THAT WEIGHS NO MORE THAN 8000-POUNDS AND HAS MAXIMUM CUT CAPACITY OF 22-INCHES
CANNOT BE USED WITH @@@@@212-8010@@@@@, @@@@@252-8713@@@@@, @@@@@246-6201@@@@@
AN ATTACHMENT
i02229156 SEBP3752
2528717 LINKAGE AR-INTERMITTENT SAW Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-8011 Y [1] BOOM GP  
2. 212-8012 Y [1] STICK GP (FELLING HEAD)  
3. 212-8014 Y [1] LINKAGE GP-FELLING HEAD  
4. 212-8018 Y [1] WIRING GP-BOOM (FLOODLIGHTS)  
5. 256-0349 Y [1] VALVE & MTG GP-MAIN CONTROL (7-BANK)  
6. 217-9700 Y [1] PUMP & MTG GP-MAIN HYDRAULIC (FELLING HEAD)  
7. 217-9701 Y [1] CYLINDER AR-HYDRAULIC (BOOM, STICK, SAW TILT)  
8. 217-9703 Y [1] LINES GP-STICK  
9. 217-9705 Y [1] LINES GP-BOOM (FELLING HEAD)  
10. 217-9707 Y [1] LINES GP-FRONT (BOOM, FELLING HEAD)  
11. 256-0350 Y [1] LINES GP-SAW  
12. 218-1917 Y [1] LINES GP-GREASE (BOOM, STICK)  
13. 259-1068 [1] FILM-INSTRUCTION (JOYSTICK CONTROL, PATTERN 1)  
    (INSIDE CAB ON RIGHT HAND WINDOW)
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520476
 

212-8014: LINKAGE GP-FELLING HEAD

212-8014 LINKAGE GP-FELLING HEAD
S/N 1031-UP
PART OF 212-8010, 282-3069 LINKAGE AR-FELLING HEAD, 252-8717 LINKAGE AR-INTERMITTENT SAW
AN ATTACHMENT
i01865083 SEBP3752
2128014 LINKAGE GP-FELLING HEAD Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-2498 B [2] SHIM (1.6-MM THK)  
2. 093-0083 B [2] SHIM (1-MM THK)  
3. 093-0086 B [2] SHIM (1-MM THK)  
4. 093-0115 B [2] SHIM (2-MM THK)  
5. 093-0118 B [2] SHIM (2-MM THK)  
6. 228-4923 [1] PIN  
7. 228-4924 [1] PIN  
8. 212-8075 [1] LINK AS  
  7Y-3427 [4] BUSHING  
9. 213-0094 [1] LINK AS  
10. 213-0095 [1] LINK  
11. 096-0854 [6] SEAL-LIP TYPE  
12. 7Y-2496 B [2] SHIM (1.6-MM THK)  
13. 8T-4131 M [4] NUT (M20X2.5-THD)  
14. 8T-4170 M [2] BOLT (M20X2.5X150-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37520477
 

212-7999: STICK AS

212-7999 STICK AS
S/N 1031-UP
PART OF 212-8016 STICK GP
AN ATTACHMENT
i02312351 SEBP3752
2127999 STICK AS Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 212-8008 [1] STICK AS  
2. 212-8009 [1] EXTENSION AS  
3. 226-4967 [1] TUBE  
4. 226-4968 [1] PIN  
5. 226-4969 [1] PIN  
6. Y [1] CYLINDER GP-STICK  
7. 234-2993 [1] CHANNEL  
8. 234-2994 [2] BUSHING  
9. 234-2995 [2] TRUNNION  
10. 234-2996 [2] PAD  
11. 234-3006 [4] PAD  
12. 234-3007 [1] PAD  
13. 234-3008 [1] PAD  
14. 234-3009 [2] PLATE  
15. 234-3010 [2] PAD  
16. 234-3011 [1] PAD  
17. 234-3012 [1] PAD  
18. 234-3013 B [4] SHIM  
19. 234-3014 B [2] SHIM  
20. 234-3015 B [2] SHIM  
21. 234-3016 [16] BLOCK  
22. 234-3017 [52] BOLT (3/8-16X0.875-IN)  
23. 234-3018 [20] SCREW-MACHINE  
24. 1D-4683 [2] BOLT-CARRIAGE (3/8-16X1-IN)  
25. 2H-3793 [1] LOCKNUT (1-1/4-7-THD)  
26. 5P-2228 [3] BOLT (1/2-13X1-IN)  
27. 6V-8801 [2] NUT (3/8-16-THD)  
28. 7G-8839 [2] SPACER (13.5X57X6-MM THK)  
29. 7X-0325 [4] BOLT (1/2-13X2.5-IN)  
30. 7X-0533 [1] WASHER-HARD (34X55X6-MM THK)  
31. 7Y-2397 [2] BUSHING  
32. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 9X-4597 [2] SEAL-LIP TYPE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP37520478
 

212-8012: STICK GP

212-8012 STICK GP -FELLING HEAD
S/N 1031-205
PART OF 212-8010 LINKAGE AR-FELLING HEAD, 252-8717 LINKAGE AR-INTERMITTENT SAW
AN ATTACHMENT
i01834683 SEBP3752
2128012 STICK GP Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-2498 B [4] SHIM (1.6-MM THK)  
2. 093-0083 B [4] SHIM (1-MM THK)  
3. 093-0115 B [4] SHIM (2-MM THK)  
4. 093-1434 [2] SEAL-LIP TYPE  
5. 107-3157 [2] WASHER (22X76.2X6-MM THK)  
6. 212-8015 [1] STICK & BEARING AS  
6A. 7Y-2395 [2] BUSHING  
6B. 7Y-2397 [2] BUSHING  
6C. 7Y-3427 [2] BUSHING  
  8T-4967 M [4] STUD-WELD (M10X1.5X23-MM)  
7. 212-8076 [1] PLATE  
8. 212-8078 [2] PIN AS  
9. 212-8121 [2] GUARD  
10. 213-0100 [4] PLATE AS  
    (EACH INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
11. 096-0854 [2] SEAL-LIP TYPE  
12. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
14. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
15. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
16. 8T-4223 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
17. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
18. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
19. 9X-4597 [2] SEAL-LIP TYPE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP37520479
 

212-8012: STICK GP

212-8012 STICK GP -FELLING HEAD
S/N 103206-UP
PART OF 212-8010, 282-3069 LINKAGE AR-FELLING HEAD, 252-8717 LINKAGE AR-INTERMITTENT SAW
AN ATTACHMENT
i02228273 SEBP3752
2128012 STICK GP Parts scheme
  For full view, you need register

Parts for your TK722 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-2498 B [4] SHIM (1.6-MM THK)  
2. 093-0083 B [4] SHIM (1-MM THK)  
3. 093-0115 B [4] SHIM (2-MM THK)  
4. 093-1434 [2] SEAL-LIP TYPE  
5. 107-3157 [2] WASHER (22X76.2X6-MM THK)  
6. 212-8076 [1] PLATE  
7. 212-8078 [2] PIN AS  
8. 9X-4597 [2] SEAL-LIP TYPE  
9. 213-0100 [4] PLATE AS  
    (EACH INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
10. 258-5544 C [1] STICK & BEARING AS  
10A. 107-9845 [2] BUSHING  
10B. 7Y-2397 [2] BUSHING  
10C. 7Y-3427 [2] BUSHING  
  8T-4967 M [4] STUD-WELD (M10X1.5X23-MM)  
11. 096-0854 [2] SEAL-LIP TYPE  
12. 8T-4956 M [3] BOLT (M12X1.75X35-MM)  
13. 8T-4123 [2] WASHER (3.62X5.75X0.375-MM THK)  
14. 8T-4780 M [2] BOLT (M20X2.5X30-MM)  
15. 8T-4139 M [16] BOLT (M12X1.75X30-MM)  
16. 8T-4223 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Operation and Maintenance Manual
Tilt Linkage Bearings - Lubricate
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Special Instruction
Instructions for Converting Intermittent Saw to Hot Saw{5051, 5051, 5057, 6543}
Instructions for Converting Intermittent Saw to Hot Saw{5051, 5051, 5057, 6543}
Instructions for Converting Hot Saw to Harvester Head Saw{5051, 5051, 5057, 6543}
Instructions for Converting Hot Saw to Harvester Head Saw{5051, 5051, 5057, 6543}
Instructions for Converting Hot Saw to Intermittent Saw {5051, 5051, 5057, 6543}
Instructions for Converting Hot Saw to Intermittent Saw {5051, 5051, 5057, 6543}
Instructions for Converting Intermittent Saw to Harvester Head Saw{5051, 5051, 5057, 6543}
Instructions for Converting Intermittent Saw to Harvester Head Saw{5051, 5051, 5057, 6543}
Instructions for Converting Harvester Head Saw to Intermittent Saw {5051, 5051, 5057, 6543}
Instructions for Converting Harvester Head Saw to Intermittent Saw {5051, 5051, 5057, 6543}
Technical Information Bulletin
Inspection of the Standard Linkage of the Boom and Stick Is Needed on Certain Track Feller Bunchers{6000, 6501, 6502}
Inspection of the Standard Linkage of the Boom and Stick Is Needed on Certain Track Feller Bunchers{6000, 6501, 6502}
Specifications
Felling Head Linkage
TK711 Track Feller Buncher, TK721
Track Feller Buncher, TK722
Track Feller Buncher and TK732
Track Feller Buncher Machine Systems
Disassembly and Assembly
Felling Head Linkage - Remove
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems
Felling Head Linkage - Install
TK711, TK721, TK722 and TK732 Track Feller Bunchers Machine Systems
Service Magazine
Special Instruction, REHS2491 , "Instructions for Converting Intermittent Saw to Hot Saw " Is Available {5051, 5051, 5057, 6543}
2005/05/02
Special Instruction, REHS2624 , "Instructions for Converting Hot Saw to Intermittent Saw " Is Available {5051, 5051, 5057, 6543}
2005/06/06

Caterpillar Parts SIS Catalog TK722 :

LINKAGE AR-FELLING HEAD
212-8010 LINKAGE AR-FELLING HEAD
LINES GP-GREASE
253-2605 LINES GP-GREASE
LINES GP-GREASE
218-1918 LINES GP-GREASE
LINES GP-GREASE
218-1918 LINES GP-GREASE
LINES GP-GREASE
218-1917 LINES GP-GREASE
BOOM GP
226-5001 BOOM GP
BOOM GP
212-8011 BOOM GP
BOOM GP
212-8011 BOOM GP
LINKAGE AR-HARVESTER HEAD
218-2974 LINKAGE AR-HARVESTER HEAD
246-6201 LINKAGE AR-HARVESTER HEAD
LINKAGE AR-HARVESTER HEAD
252-8713 LINKAGE AR-HARVESTER HEAD
LINKAGE AR-HARVESTER HEAD
282-3012 LINKAGE AR-HARVESTER HEAD
LINKAGE AR-INTERMITTENT SAW
252-8717 LINKAGE AR-INTERMITTENT SAW
LINKAGE GP-FELLING HEAD
212-8014 LINKAGE GP-FELLING HEAD
STICK AS
212-7999 STICK AS
STICK GP
212-8012 STICK GP

Truck sale:

CATERPILLAR TK722 2004
$90,000 USD 
CATERPILLAR TK722 2004
- FORESTRY - FELLER BUNCHERS - TRACK
HOLT OF CALIFORNIA
- Pleasant Grove - California - 95668
CATERPILLAR TK722 2003
 
CATERPILLAR TK722 2003
- FORESTRY - FELLER BUNCHERS - TRACK
FINNING (CANADA)
16830 107 Avenue NW - Edmonton - Alber
2005 CAT TK722
USD $70,861 
2005 CAT TK722

Major Equipment Sales
Prince George, British Columbia, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.