180-9823 GUARD GP-TRACK GUIDE -ROTATING BUSHING TRACK S/N WGB1-UP; RKG1-UP PART OF 183-1881, 183-1882, 184-6600, 220-4347 UNDERCARRIAGE AR AN ATTACHMENT D5G



UNDERCARRIAGE
GUARD GP
IDLER GP

TRACK-TYPE TRACTOR D5G TRACK-TYPE TRACTOR RKG
 D5G XL & D5G LGP Track-Type Tractors RKG00001-UP (MACHINE) POWERED BY 3046 Engine SEBP3827 D5G RKG   (2002)

UNDERCARRIAGE

GUARD GP
GUARD GP-IDLER
104-3626 GUARD GP-IDLER
GUARD GP-RECOIL MECHANISM
174-5921 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
231-0095 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
231-0095 GUARD GP-RECOIL MECHANISM
GUARD GP-TRACK GUIDE
174-5924 GUARD GP-TRACK GUIDE
GUARD GP-TRACK GUIDE
180-9823 GUARD GP-TRACK GUIDE
GUARD GP-TRACK GUIDE
276-1705 GUARD GP-TRACK GUIDE
GUARD GP-TRACK GUIDE
276-1765 GUARD GP-TRACK GUIDE
GUARD GP-TRACK ROLLER
183-2379 GUARD GP-TRACK ROLLER
GUARD GP-TRACK ROLLER
276-1715 GUARD GP-TRACK ROLLER
 

#SEBP38270240
 

180-9823: GUARD GP-TRACK GUIDE

180-9823 GUARD GP-TRACK GUIDE -ROTATING BUSHING TRACK
S/N WGB1-UP; RKG1-UP
PART OF 183-1881, 183-1882, 184-6600, 220-4347 UNDERCARRIAGE AR
AN ATTACHMENT
i01952076 SEBP3827
1809823 GUARD GP-TRACK GUIDE Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 2B-7557 [4] CORK  
2. 132-3861 [2] GUARD  
3. 165-2046 [1] GUARD AS (RH INNER)  
4. 165-2047 [1] GUARD AS (LH INNER)  
5. 174-6983 [1] GUARD AS (RH)  
6. 174-6985 [1] GUARD AS (LH)  
7. 180-9833 [1] GUARD AS (LH-OUTER)  
8. 180-9832 [1] GUARD AS (RH-OUTER)  
9. 180-9834 [1] GUARD AS (RH INNER)  
10. 180-9835 [1] GUARD AS (LH INNER)  
11. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
12. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
14. 8T-4136 M [14] BOLT (M10X1.5X25-MM)  
15. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
16. 8T-4173 M [16] BOLT (M16X2X110-MM)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
 

#SEBP38270241
 

276-1705: GUARD GP-TRACK GUIDE

276-1705 GUARD GP-TRACK GUIDE
S/N WGB1-UP; RKG1-UP
PART OF 231-0065, 231-0085 UNDERCARRIAGE AR
AN ATTACHMENT
i02459479 SEBP3827
2761705 GUARD GP-TRACK GUIDE Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 2B-7557 [4] CORK  
2. 132-3861 [2] GUARD  
3. 294-9287 [1] GUARD AS (RH)  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
4. 294-9289 [1] GUARD AS (LH)  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
5. 276-1690 [1] GUARD AS (RH INNER)  
6. 276-1691 [1] GUARD AS (LH INNER)  
7. 276-1699 [1] GUARD AS (RH OUTER)  
8. 276-1700 [1] GUARD AS (LH OUTER)  
9. 276-1701 [1] GUARD AS (RH INNER)  
10. 276-1702 [1] GUARD AS (LH INNER)  
11. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
12. 8T-4121 [14] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4122 [16] WASHER-HARD (17X32X3.5-MM THK)  
14. 8T-4136 M [14] BOLT (M10X1.5X25-MM)  
15. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
16. 8T-4173 M [16] BOLT (M16X2X110-MM)  
  M   METRIC PART
 

#SEBP38270242
 

276-1765: GUARD GP-TRACK GUIDE

276-1765 GUARD GP-TRACK GUIDE
S/N WGB1-UP; RKG1-UP
AN ATTACHMENT
i02798682 SEBP3827
2761765 GUARD GP-TRACK GUIDE Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 276-1695 [2] GUARD AS  
2. 198-4778 [8] WASHER-HARD (13.5X30X12-MM THK)  
3. 8T-4194 M [8] BOLT (M12X1.75X50-MM)  
  M   METRIC PART
 

#SEBP38270243
 

183-2379: GUARD GP-TRACK ROLLER

183-2379 GUARD GP-TRACK ROLLER
S/N WGB1-UP; RKG1-UP
CANNOT BE USED WITH @@@@@183-1881@@@@@, @@@@@183-1882@@@@@, @@@@@184-6600@@@@@, @@@@@220-4347@@@@@
AN ATTACHMENT
i01943591 SEBP3827
1832379 GUARD GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8Y-3413 [4] TAB  
2. 8Y-7125 [10] PIPE  
3. 138-1946 [4] PLATE  
4. 152-7146 M [10] BOLT (M12X1.75X300-MM)  
5. 180-7321 [4] PLATE  
6. 183-2381 [2] GUARD AS (LH)  
7. 183-2382 [2] GUARD AS (RH)  
8. 2M-0849 [20] WASHER-HARD (13.5X25.5X5-MM THK)  
9. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
11. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
12. 8T-4184 M [8] BOLT (M12X1.75X45-MM)  
13. 8T-4223 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 8T-4244 M [10] NUT (M12X1.75-THD)  
15. 8T-4956 M [20] BOLT (M12X1.75X35-MM)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
 

#SEBP38270244
 

276-1715: GUARD GP-TRACK ROLLER

276-1715 GUARD GP-TRACK ROLLER
S/N WGB1-UP; RKG1-UP
AN ATTACHMENT
i02510461 SEBP3827
2761715 GUARD GP-TRACK ROLLER Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 8Y-7125 [10] PIPE  
2. 152-7146 M [10] BOLT (M12X1.75X300-MM)  
3. 180-7321 [4] PLATE  
4. 276-1680 [2] GUARD AS  
5. 276-1681 [2] GUARD AS  
6. 276-1718 [4] PLATE  
7. 2M-0849 [20] WASHER-HARD (13.5X25.5X5-MM THK)  
8. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
11. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
12. 8T-4223 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
13. 8T-4244 M [10] NUT (M12X1.75-THD)  
14. 8T-4956 M [20] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
 

#SEBP38270245
 

174-5928: IDLER GP-FRONT

174-5928 IDLER GP-FRONT
S/N WGB1-UP; RKG1-UP
PART OF 174-5906, 174-5909 UNDERCARRIAGE AR
Type 1
i01942240 SEBP3827
1745928 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1B-1067 [2] WASHER (13.5X50.8X11.1-MM THK)  
2. 2V-9025 [2] PILOT-RECOIL SPRING  
3. 3G-3259 [2] SEAL AS  
4. 4T-5613 [2] RING-WEAR  
5. 6S-7220 B [4] PLATE AS  
6. 5M-6708 [2] WASHER (0.609X1.25X0.219-IN THK)  
9. 7X-0588 [8] WASHER-HARD (17X27X3.5-MM THK)  
10. 8Y-6659 [2] SPRING-RECOIL  
11. 214-1420 [2] GUARD AS  
    (EACH INCLUDES)
11A. 5P-9891 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
11B. 7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
12. 9H-4105 [4] DOWEL  
13. 174-7004 [2] YOKE AS  
14. 229-9382 [2] SEAL-WIPER  
15. 174-6999 [2] STOP  
16. 174-7000 [2] STOP  
17. 177-1072 [1] ADJUSTER AS (RH)  
18. 177-1073 [1] ADJUSTER AS (LH)  
19. 184-6592 Y [1] IDLER GP-TRACK (RH)  
20. 184-6593 Y [1] IDLER GP-TRACK (LH)  
21. 190-8609 [2] VALVE-FILL  
22. 4J-5268 [2] SEAL-O-RING  
23. 6S-3286 B [16] SHIM (1.5-MM THK)  
24. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
25. 7X-0584 [24] WASHER-HARD (13.5X20.5X2-MM THK)  
26. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4140 M [8] BOLT (M16X2X60-MM)  
28. 8T-4183 M [24] BOLT (M12X1.75X40-MM)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP38270246
 

174-5928: IDLER GP-FRONT

174-5928 IDLER GP-FRONT
S/N WGB1-UP; RKG1-UP
PART OF 174-5906, 174-5909 UNDERCARRIAGE AR
Type 2
i03143661 SEBP3827
1745928 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1B-1067 [2] WASHER (13.5X50.8X11.1-MM THK)  
2. 2V-9025 [2] PILOT-RECOIL SPRING  
3. 3G-3259 [2] SEAL AS  
4. 4T-5613 [2] RING-WEAR  
5. 6S-7220 [4] PLATE AS  
6. 5M-6708 [2] WASHER (0.609X1.25X0.219-IN THK)  
9. 7X-0588 [8] WASHER-HARD (17X27X3.5-MM THK)  
10. 8Y-6659 [2] SPRING-RECOIL  
11. 214-1420 [2] GUARD AS  
    (EACH INCLUDES)
11A. 5P-9891 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
11B. 7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
12. 9H-4105 [4] DOWEL  
13. 174-7004 [2] YOKE AS  
14. 229-9382 C [2] SEAL-WIPER  
15. 321-1170 C [2] STOP  
16. 321-1171 C [2] STOP  
17. 177-1072 [1] ADJUSTER AS (RH)  
18. 177-1073 [1] ADJUSTER AS (LH)  
19. 184-6592 CY [2] IDLER GP-TRACK  
21. 190-8609 [2] VALVE-FILL  
22. 4J-5268 [2] SEAL-O-RING  
23. 6S-3286 B [16] SHIM (1.5-MM THK)  
24. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
25. 7X-0584 [24] WASHER-HARD (13.5X20.5X2-MM THK)  
26. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
27. 7X-2556 CM [8] BOLT (M16X2X100-MM)  
28. 8T-4183 M [24] BOLT (M12X1.75X40-MM)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP38270247
 

183-1860: IDLER GP-FRONT

183-1860 IDLER GP-FRONT -ROTATING BUSHING TRACK
S/N WGB1-UP; RKG1-UP
PART OF 183-1881, 183-1882, 184-6600, 220-4347 UNDERCARRIAGE AR
AN ATTACHMENT
i01952077 SEBP3827
1831860 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1B-1067 [2] WASHER (13.5X50.8X11.1-MM THK)  
2. 2V-9025 [2] PILOT-RECOIL SPRING  
3. 3G-3259 [2] SEAL AS  
4. 4T-5613 [2] RING-WEAR  
5. 6S-7220 B [4] PLATE AS  
6. 5M-6708 [2] WASHER (0.609X1.25X0.219-IN THK)  
9. 7X-0588 [8] WASHER-HARD (17X27X3.5-MM THK)  
10. 8Y-6659 [2] SPRING-RECOIL  
11. 214-1420 [2] GUARD AS  
    (EACH INCLUDES)
11A. 5P-9891 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
11B. 7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
12. 9H-4105 [4] DOWEL  
13. 155-8681 [2] YOKE AS  
14. 229-9382 [2] SEAL-WIPER  
15. 174-6999 [2] STOP  
16. 174-7000 [2] STOP  
17. 177-1072 [1] ADJUSTER AS (RH)  
18. 177-1073 [1] ADJUSTER AS (LH)  
19. 184-6592 Y [1] IDLER GP-TRACK (RH)  
20. 184-6593 Y [1] IDLER GP-TRACK (LH)  
21. 190-8609 [2] VALVE-FILL  
22. 4J-5268 [2] SEAL-O-RING  
23. 6S-3286 B [16] SHIM (1.5-MM THK)  
24. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
25. 7X-0584 [24] WASHER-HARD (13.5X20.5X2-MM THK)  
26. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
27. 8T-4140 M [8] BOLT (M16X2X60-MM)  
28. 8T-4183 M [24] BOLT (M12X1.75X40-MM)  
29. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
30. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP38270248
 

231-0105: IDLER GP-FRONT

231-0105 IDLER GP-FRONT
S/N WGB1-UP; RKG1-UP
PART OF 231-0065, 231-0085 UNDERCARRIAGE AR
AN ATTACHMENT
i02459476 SEBP3827
2310105 IDLER GP-FRONT Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1B-1067 [2] WASHER (13.5X50.8X11.1-MM THK)  
2. 2V-9025 [2] PILOT-RECOIL SPRING  
3. 3G-3259 [2] SEAL AS  
4. 4T-5613 [2] RING-WEAR  
5. 5M-6708 [2] WASHER (0.609X1.25X0.219-IN THK)  
6. 5P-9891 [2] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
7. 7B-3028 [8] SCREW-DRIVE (NO 4X 3/16-IN)  
8. 7X-0588 [8] WASHER-HARD (17X27X3.5-MM THK)  
9. 214-1420 [2] GUARD AS  
    (EACH INCLUDES)
  5P-9891 [1] PLATE-WARNING (HIGH PRESSURE CYLINDER)  
  7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
10. 9H-4105 [4] DOWEL  
11. 321-1170 [2] STOP  
12. 321-1171 [2] STOP  
13. 190-8609 [2] VALVE-FILL  
14. 229-9382 [2] SEAL-WIPER  
15. 231-0072 [2] SPRING-RECOIL  
16. 231-0108 [1] ADJUSTER AS (RH)  
17. 231-0109 [1] ADJUSTER AS (LH)  
18. 250-0367 Y [2] IDLER GP-TRACK  
19. 250-9485 [2] YOKE AS  
20. 252-5169 [2] GUARD AS (RH)  
21. 252-5170 [2] GUARD AS (LH)  
22. 4J-5268 [2] SEAL-O-RING  
23. 6S-3286 B [16] SHIM (1.5-MM THK)  
24. 7X-0451 [2] NUT-FULL (1-1/4-7-THD)  
25. 7X-0584 [16] WASHER-HARD (13.5X20.5X2-MM THK)  
26. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
27. 7X-2556 M [8] BOLT (M16X2X100-MM)  
28. 8T-4183 M [16] BOLT (M12X1.75X40-MM)  
29. 8T-4195 M [12] BOLT (M10X1.5X30-MM)  
30. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP38270249
 

184-6592: IDLER GP-TRACK

184-6592 IDLER GP-TRACK -RH
S/N WGB1-UP; RKG1-UP
PART OF 174-5928, 183-1860 IDLER GP-FRONT
ALSO AN ATTACHMENT
i01949501 SEBP3827
1846592 IDLER GP-TRACK Parts scheme
  For full view, you need register

Parts for your D5G TRACK-TYPE TRACTOR:

Pos. Part No Qty Parts name Comments
1. 1V-9611 [2] BUSHING AS-ROLLER  
    (EACH INCLUDES)
1A. 9B-2289 [2] PIN  
1B. 7K-1089 [1] BUSHING-TERMINAL  
2. 2M-2858 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  1M-3097 [2] RING-SEALING  
3. 5M-5000 [2] LOCK-PIN  
4. 6Y-0473 [1] PLUG-CLEAR  
5. 7G-4332 [1] STOPPER  
6. 8E-7899 [1] SHAFT-FRONT IDLER  
7. 9U-9065 [1] IDLER-TRACK  
8. 174-7006 [1] BEARING (LH)  
9. 174-7007 [1] BEARING (RH)  
10. 1H-8128 [2] SEAL-O-RING  
11. 7F-8267 [2] SEAL-O-RING  
12. 7X-0618 [2] WASHER-HARD (13.5X40X5-MM THK)  
13. 8C-6877 [2] BOLT (7/16-14X1.75-IN)  
14. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 9B-7237 [12] BOLT (3/8-16X1.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Caterpillar Parts SIS Catalog D5G :

GUARD GP-TRACK GUIDE
174-5924 GUARD GP-TRACK GUIDE
GUARD GP-RECOIL MECHANISM
231-0095 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
231-0095 GUARD GP-RECOIL MECHANISM
GUARD GP-RECOIL MECHANISM
174-5921 GUARD GP-RECOIL MECHANISM
GUARD GP-IDLER
104-3626 GUARD GP-IDLER
FRAME GP-TRACK ROLLER
231-0075 FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
180-9714 FRAME GP-TRACK ROLLER
FRAME GP-TRACK ROLLER
180-9714 FRAME GP-TRACK ROLLER
GUARD GP-TRACK GUIDE
276-1705 GUARD GP-TRACK GUIDE
GUARD GP-TRACK GUIDE
276-1765 GUARD GP-TRACK GUIDE
GUARD GP-TRACK ROLLER
183-2379 GUARD GP-TRACK ROLLER
GUARD GP-TRACK ROLLER
276-1715 GUARD GP-TRACK ROLLER
IDLER GP-FRONT
174-5928 IDLER GP-FRONT
IDLER GP-FRONT
174-5928 IDLER GP-FRONT
IDLER GP-FRONT
183-1860 IDLER GP-FRONT
IDLER GP-FRONT
231-0105 IDLER GP-FRONT

Truck sale:

Caterpillar D5G, Construction
62,500 USD 
Caterpillar D5G, Construction
- Dozers
MILTON CAT
Caterpillar D5G, Construction
48,000 
Caterpillar D5G, Construction
- Dozers
MACALLISTER MACHINERY CO., INC
CATERPILLAR D5G 2007
 
CATERPILLAR D5G 2007
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR D5G 2004
 
CATERPILLAR D5G 2004
- TRACK TYPE TRACTORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
CATERPILLAR D5G 2002
 
CATERPILLAR D5G 2002
- TRACK TYPE TRACTORS
WHAYNE SUPPLY CO