HYDRAULIC SYSTEM
LINES GP-CYLINDERMANIFOLD GP
MOTOR GP
TANK GP
PUMP GP
HYDRAULIC SYSTEM
LINES GP-CYLINDER
#SEBP38450850
244-5588: LINES GP-TILT CYLINDER
244-5588 LINES GP-TILT CYLINDER
S/N N1A4392-UP
PART OF 244-5611 HYDRAULIC AR-3 VALVE
S/N N1A4392-UP
PART OF 244-5611 HYDRAULIC AR-3 VALVE
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 3. | 254-3571 | [1] | BRACKET AS | |
| 4. | 258-8784 I | [1] | HOSE AS | |
| 5. | 258-8785 | [1] | TUBE AS | |
| 6. | 258-8786 | [1] | TUBE AS | |
| 7. | 258-8787 | [1] | TUBE AS | |
| 8. | 263-4978 I | [1] | HOSE AS | |
| 9. | 273-1888 | [2] | GUARD | |
| 11. | 1P-3703 | [1] | SEAL-RECTANGULAR | |
| 12. | 1P-3704 | [6] | SEAL-RECTANGULAR | |
| 14. | 1P-5767 | [6] | FLANGE-HALF | |
| 15. | 6V-0400 | [2] | FLANGE-HALF | |
| 16. | 7Y-4538 | [6] | CLAMP-HALF | |
| 17. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| 19. | 8T-4194 CM | [16] | BOLT (M12X1.75X50-MM) | |
| 20. | 8T-4223 | [36] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8T-4648 M | [4] | BOLT (M12X1.75X70-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP38450851
242-1307: MANIFOLD GP-CONTROL
242-1307 MANIFOLD GP-CONTROL -BRAKE CHARGE, HYD FAN CONTROL
S/N N1A1-UP
PART OF 237-0435 LINES GP-HYD FAN DR & OIL CLR
S/N N1A1-UP
PART OF 237-0435 LINES GP-HYD FAN DR & OIL CLR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 252-9256 Y | [1] | VALVE GP-DIVERTER (HYDRAULIC FAN) | |
| 2. | 158-9956 Y | [1] | VALVE GP-CHECK (BRAKE OIL) | |
| 3. | 239-0621 J | [1] | VALVE GP-DIVERTER (HYDRAULIC TANK) | |
| 4. | 256-9997 | [1] | VALVE GP-RELIEF (HYDRAULIC TANK) | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 161-6154 | [1] | SEAL-O-RING | ||
| 6E-0381 | [1] | RING-BACKUP | ||
| 5. | 245-8355 H | [1] | VALVE GP-RELIEF (BRAKE) | |
| 2M-9780 H | [1] | SEAL-O-RING | ||
| 161-6149 H | [1] | SEAL-O-RING | ||
| 161-6161 H | [2] | RING-BACKUP | ||
| 6. | 249-5227 Y | [1] | VALVE GP-SHUTTLE (BRAKE ACCUMULATOR) | |
| 7. | 239-0618 L | [1] | VALVE GP-SHUTTLE (BRAKE, HYDRAULIC FAN) | |
| 3H-0442 L | [1] | SEAL-O-RING | ||
| 8. | 183-7595 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(BRAKE, HYDRAULIC FAN) | |
| 9. | 6E-5066 | [1] | SCREEN (HYDRAULIC)(CONTROL VALVE MANIFOLD) | |
| 10. | 246-0535 | [1] | PLUG-ORIFICE | |
| 11. | 9S-8001 | [2] | PLUG | |
| 12. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 13. | 4J-7533 | [2] | SEAL-O-RING | |
| 14. | 3J-1907 | [2] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 200-6282 J | [1] | KIT-SEAL (DIVERTER VALVE) | ||
| (INCLUDES SEALS & RINGS) | ||||
| 133-5545 H | [1] | KIT-SEAL | ||
| (INCLUDES SEALS & RINGS) | ||||
| 239-5195 L | [1] | KIT-SEAL (SHUTTLE VALVE) | ||
| (INCLUDES SEALS & RINGS) | ||||
| H | KIT MARKED H SERVICES PART(S) MARKED H | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450852
242-1307: MANIFOLD GP-CONTROL
242-1307 MANIFOLD GP-CONTROL -BRAKE CHARGE, HYD FAN CONTROL
S/N N1A1-4569
PART OF 237-0435 LINES GP-HYD FAN DR & OIL CLR
S/N N1A1-4569
PART OF 237-0435 LINES GP-HYD FAN DR & OIL CLR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 252-9256 JY | [1] | VALVE GP-DIVERTER (HYDRAULIC FAN) | |
| 2. | 158-9956 Y | [1] | VALVE GP-CHECK (BRAKE OIL) | |
| 3. | 4J-7533 | [2] | SEAL-O-RING | |
| 4. | 3J-1907 | [2] | SEAL-O-RING | |
| 5. | 245-8355 | [1] | VALVE GP-RELIEF (BRAKE) | |
| 2M-9780 H | [1] | SEAL-O-RING | ||
| 161-6149 H | [1] | SEAL-O-RING | ||
| 161-6161 H | [2] | RING-BACKUP | ||
| 6. | 257-8414 Y | [1] | VALVE GP-SHUTTLE (BRAKE ACCUMULATOR) | |
| 7. | 239-0618 CL | [1] | VALVE GP-SHUTTLE (BRAKE, HYDRAULIC FAN) | |
| 3H-0442 | [1] | SEAL-O-RING | ||
| 8. | 183-7595 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(BRAKE, HYDRAULIC FAN) | |
| 9. | 6E-5066 C | [1] | SCREEN (HYDRAULIC)(CONTROL VALVE MANIFOLD) | |
| 10. | 282-5394 C | [1] | PLUG-ORIFICE | |
| 11. | 9S-8001 | [3] | PLUG | |
| 12. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 15. | 282-5397 CJT | [1] | VALVE GP-RELIEF & DIVERTER (HYDRAULIC TANK) | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6E-0381 | [1] | RING-BACKUP | ||
| 161-6154 | [1] | SEAL-O-RING | ||
| 16. | 282-5393 C | [1] | PLUG-ORIFICE | |
| AVAILABLE REPAIR KIT(S): | ||||
| 200-6282 J | [1] | KIT-SEAL (DIVERTER VALVE) | ||
| (INCLUDES SEALS & RINGS) | ||||
| 133-5545 H | [1] | KIT-SEAL | ||
| 239-5195 L | [1] | KIT-SEAL (SHUTTLE VALVE) | ||
| (INCLUDES SEALS & RINGS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| H | KIT MARKED H INCLUDES PART(S) MARKED H | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| T | VALVE GP INCLUDES RELIEF VALVE & DIVERTER VALVE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450853
352-1587: MANIFOLD GP-CONTROL
352-1587 MANIFOLD GP-CONTROL
S/N N1A4570-UP
PART OF 237-0435 LINES GP-HYD FAN DR & OIL CLR
S/N N1A4570-UP
PART OF 237-0435 LINES GP-HYD FAN DR & OIL CLR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 239-0605 Y | [1] | VALVE GP-DIVERTER | |
| 2. | 158-9956 Y | [1] | VALVE GP-CHECK | |
| 3. | 356-5129 | [1] | VALVE GP-PRIORITY | |
| 4. | 245-8355 J | [1] | VALVE GP-RELIEF (HYDRAULIC TANK) | |
| 5. | 257-8414 Y | [1] | VALVE GP-SHUTTLE (BRAKE ACCUMULATOR) | |
| 6. | 474-0524 H | [1] | VALVE GP-SHUTTLE (BRAKE, HYDRAULIC FAN) | |
| 7. | 183-7595 Y | [1] | VALVE GP-SOLENOID (24-VOLT) | |
| 8. | 6E-5066 | [1] | SCREEN (HYDRAULIC) | |
| 9. | 3J-7354 | [3] | SEAL-O-RING | |
| 10. | 9S-8002 | [3] | PLUG (7/16-20-THD) | |
| 11. | 253-3376 | [1] | PIN-THREADED | |
| 12. | 4J-7533 | [5] | SEAL-O-RING | |
| 13. | 9S-8001 | [5] | PLUG | |
| AVAILABLE REPAIR KIT(S): | ||||
| 133-5545 J | [1] | KIT-SEAL | ||
| (INCLUDES O-RING SEALS & BACKUP RINGS) | ||||
| 457-5280 H | [1] | KIT-SEAL (SHUTTLE VALVE) | ||
| (INCLUDES O-RING SEAL & BACKUP RING) | ||||
| H | KIT MARKED H SERVICES PART(S) MARKED H | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450854
269-9398: MANIFOLD GP-VALVE
269-9398 MANIFOLD GP-VALVE -END COVER
S/N N1A1-4275
PART OF 256-3643, 261-3682, 261-3683, 261-4171, 261-4172 VALVE GP-MAIN CONTROL
S/N N1A1-4275
PART OF 256-3643, 261-3682, 261-3683, 261-4171, 261-4172 VALVE GP-MAIN CONTROL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-9535 | [2] | SEAL-O-RING | |
| 2. | 6E-5066 | [1] | SCREEN (HYDRAULIC) | |
| 3. | 225-0300 Y | [1] | VALVE GP-SOLENOID (HYDRAULIC LOCKOUT) | |
| 4. | 282-4349 H | [1] | VALVE GP-PRESSURE REDUCING (PILOT OIL) | |
| 5. | 6J-3134 | [4] | SEAL-O-RING | |
| 6. | 254-5789 J | [1] | VALVE GP-RELIEF (PUMP MARGIN PRESSURE) | |
| 7. | 8T-1158 M | [1] | BOLT-SOCKET HEAD (M8X1.25X20-MM) | |
| 8. | 148-8395 | [1] | PLUG AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 9. | 158-9956 Y | [1] | VALVE GP-CHECK (PILOT OIL) | |
| 10. | 162-0177 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 11. | 173-3993 | [16] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 4J-7533 | [1] | SEAL-O-RING | ||
| 9S-8001 | [1] | PLUG | ||
| 12. | 183-7263 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 13. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 14. | 4J-0524 | [2] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 224-7135 H | [1] | KIT-SEAL (PRESSURE REDUCING VALVE) | ||
| (KIT INCLUDES RINGS & SEALS) | ||||
| 239-6336 J | [1] | KIT-SEAL (RELIEF VALVE) | ||
| (KIT INCLUDES RINGS & SEALS) | ||||
| H | KIT MARKED H SERVICES PART(S) MARKED H | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450855
269-9398: MANIFOLD GP-VALVE
269-9398 MANIFOLD GP-VALVE -END COVER
S/N N1A4276-UP
PART OF 256-3643, 261-3682, 261-3683, 261-4171, 261-4172 VALVE GP-MAIN CONTROL
S/N N1A4276-UP
PART OF 256-3643, 261-3682, 261-3683, 261-4171, 261-4172 VALVE GP-MAIN CONTROL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4J-9535 | [2] | SEAL-O-RING | |
| 2. | 283-3462 C | [1] | SCREEN | |
| 3. | 333-8242 C | [1] | VALVE GP-SOLENOID (24-VOLT)(HYDRAULIC LOCKOUT) | |
| 250-6148 | [1] | COIL AS (24-VOLT) | ||
| 4. | 335-1074 CH | [1] | VALVE GP-PRESSURE REDUCING (PILOT OIL) | |
| 5. | 6J-3134 | [4] | SEAL-O-RING | |
| 6. | 328-0730 CJ | [1] | VALVE GP-RELIEF (PUMP MARGIN PRESSURE) | |
| 8. | 148-8395 | [1] | PLUG AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 9. | 177-3868 CL | [1] | VALVE GP-CHECK (PILOT OIL) | |
| 10. | 162-0177 C | [7] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 11. | 173-3993 | [16] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 4J-7533 | [1] | SEAL-O-RING | ||
| 9S-8001 | [1] | PLUG | ||
| 12. | 183-7263 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 13. | 1P-3705 | [1] | SEAL-RECTANGULAR | |
| 14. | 4J-0524 | [2] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 224-7135 H | [1] | KIT-SEAL (PRESSURE REDUCING VALVE) | ||
| (INCLUDES RINGS & SEALS) | ||||
| 239-6336 J | [1] | KIT-SEAL (RELIEF VALVE) | ||
| (INCLUDES RINGS & SEALS) | ||||
| 120-9051 L | [1] | KIT-SEAL (CHECK VALVE) | ||
| (INCLUDES RINGS & SEALS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| H | KIT MARKED H SERVICES PART(S) MARKED H | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
#SEBP38450856
271-9248: MANIFOLD GP-VALVE
271-9248 MANIFOLD GP-VALVE -INLET
S/N N1A1-UP
PART OF 256-3643, 261-3682, 261-3683, 261-4171, 261-4172 VALVE GP-MAIN CONTROL
S/N N1A1-UP
PART OF 256-3643, 261-3682, 261-3683, 261-4171, 261-4172 VALVE GP-MAIN CONTROL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 096-3831 | [1] | ORIFICE | |
| 3. | 6E-5066 | [1] | SCREEN (HYDRAULIC) | |
| 4. | 193-1665 Y | [1] | VALVE GP-PRESSURE REDUCING (SIGNAL DUPLICATION) | |
| 5. | 346-0475 J | [1] | VALVE GP-RELIEF (LOAD SENSING SIGNAL) | |
| 8. | 148-8395 | [1] | PLUG AS | |
| 8A. | 3K-0360 | [1] | SEAL-O-RING | |
| 8B. | 9S-8005 | [1] | PLUG (3/4-16-THD) | |
| 9. | 162-0177 | [1] | PLUG AS | |
| 9A. | 3J-1907 | [1] | SEAL-O-RING | |
| 9B. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 10. | 173-3993 | [6] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 10A. | 4J-7533 | [1] | SEAL-O-RING | |
| 10B. | 9S-8001 | [1] | PLUG | |
| AVAILABLE REPAIR KIT(S): | ||||
| 359-1297 J | [1] | KIT-SEAL | ||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450857
246-6152: MOTOR GP-GEAR
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 250-0492 | [4] | BOLT (M12X1.75X115-MM) | |
| 2. | 136-9030 | [4] | WASHER (12.5X18X1.5-MM THK) | |
| 3. | 150-3378 J | [1] | SEAL-SHAFT | |
| 4. | 096-0194 J | [1] | RING-RETAINING | |
| 5. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 6. | 3J-1907 | [1] | SEAL-O-RING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 194-9632 J | [1] | KIT-SEAL (GEAR MOTOR) | ||
| (INCLUDES RINGS & SEALS) | ||||
| J | REPAIR KIT(S) MARKED J SERVICES PART(S) MARKED J | |||
#SEBP38450858
237-0960: MOUNTING GP-HYDRAULIC TANK
237-0960 MOUNTING GP-HYDRAULIC TANK
S/N N1A1-UP
PART OF 237-0238 HYDRAULIC AR-2 VALVE
S/N N1A1-UP
PART OF 237-0238 HYDRAULIC AR-2 VALVE
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6T-6080 | [8] | MOUNT-RUBBER | |
| 2. | 257-0500 | [1] | BRACKET AS (LH) | |
| 3. | 257-0499 | [1] | BRACKET AS (RH) | |
| 4. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 5. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| 6. | 8T-6381 M | [4] | BOLT (M20X2.5X120-MM) | |
| 7. | 8T-7971 | [8] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 8. | 8X-0674 | [4] | WASHER (22X100X10-MM THK) | |
| M | METRIC PART | |||
#SEBP38450859
385-8575: PUMP & MOUNTING GP-AIR
385-8575 PUMP & MOUNTING GP-AIR -VARIABLE PITCH FAN
S/N N1A1-UP
PART OF 330-0824 CONTROL AR-FAN
S/N N1A1-UP
PART OF 330-0824 CONTROL AR-FAN
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 8T-9658 | [3] | SPACER (8.2X12.7X25.4-MM THK) | |
| 3. | 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | |
| 4. | 155-0576 | [6] | MOUNT-ISOLATION | |
| 5. | 374-1603 C | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 6. | 394-1108 C | [1] | BRACKET AS | |
| 7. | 368-4198 C | [1] | PUMP AS-AIR (VARIABLE PITCH FAN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
