AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

436-8369 KIT-GASKET -SINGLE CYLINDER HEAD S/N BXY1-UP CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP FOR USE WITH @@@@@225-6065@@@@@, @@@@@281-6452@@@@@, @@@@@281-6453@@@@@, @@@@@349-4448@@@@@, @@@@@349-4449@@@@@ 988H


SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
LUBRICANTS & FLUIDS
LINES GP-DIAGNOSTIC

WHEEL LOADER 988H WHEEL LOADER BXY
 988H Wheel Loader BXY00001-UP (MACHINE) POWERED BY C18 Engine SEBP3906 988H BXY   (2004)

SERVICE EQUIPMENT AND SUPPLIES

GASKET & SEAL KITS
375-7728 KIT-TRANSMISSION GASKET
KIT-GASKET
348-3295 KIT-GASKET
436-8369 KIT-GASKET
492-1201 KIT-GASKET
 

#SEBP39061810
 

436-8369: KIT-GASKET

436-8369 KIT-GASKET -SINGLE CYLINDER HEAD
S/N BXY1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO SINGLE CYLINDER HEAD KIT PART NUMBERS 317-8750-UP
FOR USE WITH @@@@@225-6065@@@@@, @@@@@281-6452@@@@@, @@@@@281-6453@@@@@, @@@@@349-4448@@@@@, @@@@@349-4449@@@@@
i05586789 SEBP3906
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  243-1159 [18] FASTENER AS  
    (EACH INCLUDES)
  149-7378 [1] GROMMET  
  4P-4460 [1] GASKET (TURBOCHARGER, OIL SUPPLY)  
  7N-7559 [1] GASKET  
  227-1204 [1] GASKET  
  357-1752 [1] GASKET-TURBOCHARGER  
  359-0908 [1] GASKET-CYLINDER HEAD  
  139-3550 [1] GASKET-REGULATOR (HOUSING)  
  4N-1156 [1] GASKET-REGULATOR COVER  
  375-2467 M [4] LOCKNUT-FLANGE (M10X1.5-THD)  
  5P-5678 D SEAL (3-M)  
  142-2329 [1] SEAL  
  160-7271 [1] SEAL  
  272-0390 [1] SEAL  
  3E-6772 [24] SEAL (WATER)(WATER)  
  6V-0128 [1] SEAL-CONNECTOR  
  3S-9643 [2] SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR)  
  3J-1907 [1] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  3P-1155 [1] SEAL-O-RING  
  5E-8771 [1] SEAL-O-RING  
  5P-0840 [2] SEAL-O-RING  
  6V-1197 [1] SEAL-O-RING  
  6V-3251 [1] SEAL-O-RING  
  6V-6609 [6] SEAL-O-RING  
  6V-9027 [1] SEAL-O-RING  
  8C-3089 [1] SEAL-O-RING  
  214-7566 [3] SEAL-O-RING  
  214-7568 [10] SEAL-O-RING  
  238-5078 [2] SEAL-O-RING  
  238-5080 [2] SEAL-O-RING  
  242-9537 [3] SEAL-VALVE COVER  
  281-8261 [6] SLEEVE AS-EXHAUST  
  357-0351 M [4] STUD-TAPERLOCK (M10X1.5X60-MM)  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP39061811
 

492-1201: KIT-GASKET

492-1201 KIT-GASKET
S/N BXY1-UP
SINGLE CYLINDER HEAD GASKET KIT
i06621290 SEBP3906
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4P-4460 [1] GASKET  
  7N-7559 [1] GASKET  
  227-1204 [1] GASKET  
  357-1752 [1] GASKET-TURBOCHARGER  
  359-0908 [1] GASKET-CYLINDER HEAD  
  139-3550 [1] GASKET-REGULATOR (HOUSING)  
  4N-1156 [1] GASKET-REGULATOR COVER  
  149-7378 [18] GROMMET  
  375-2467 M [4] LOCKNUT-FLANGE (M10X1.5-THD)  
  142-2329 [1] SEAL  
  160-7271 [1] SEAL  
  272-0390 [1] SEAL  
  359-1439 [24] SEAL AS-WATER  
  6V-0128 [1] SEAL-CONNECTOR  
  126-2702 [1] SEAL-INTEGRAL  
  198-6068 [1] SEAL-INTEGRAL  
  3S-9643 [2] SEAL-LIP TYPE  
  3J-7354 [1] SEAL-O-RING  
  5E-8771 [1] SEAL-O-RING  
  5P-0840 [2] SEAL-O-RING  
  6V-1197 [1] SEAL-O-RING  
  6V-3251 [1] SEAL-O-RING  
  6V-6609 [9] SEAL-O-RING  
  6V-9027 [2] SEAL-O-RING  
  8C-3089 [1] SEAL-O-RING  
  117-8801 [1] SEAL-O-RING  
  214-7566 [3] SEAL-O-RING  
  214-7568 [12] SEAL-O-RING  
  238-5078 [2] SEAL-O-RING  
  238-5080 [3] SEAL-O-RING  
  242-9537 [3] SEAL-VALVE COVER  
  281-8261 [6] SLEEVE AS-EXHAUST  
  357-0351 M [4] STUD-TAPERLOCK (M10X1.5X60-MM)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
  M   METRIC PART
 

#SEBP39061812
 

388-1992: KIT-PREVENTIVE MAINTENANCE

388-1992 KIT-PREVENTIVE MAINTENANCE
S/N BXY1-UP
250 HOURS
i04760333 SEBP3906
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  169-8373 [1] BOTTLE GP-FLUID SAMPLING  
   
  326-1643 [1] FILTER AS-WATER SEP & FUEL  
  106-3969 [1] FILTER ELEMENT AS-AIR (PRIMARY)  
   
  8P-5343 [1] FILTER ELEMENT-CAB AIR  
  275-2604 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  2J-0157 [1] SEAL-O-RING  
 

#SEBP39061813
 

388-2217: KIT-PREVENTIVE MAINTENANCE

388-2217 KIT-PREVENTIVE MAINTENANCE
S/N BXY1-UP
500 HOURS
i04760343 SEBP3906
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  169-8373 [9] BOTTLE GP-FLUID SAMPLING  
   
  106-3969 [1] FILTER ELEMENT AS-AIR (PRIMARY)  
  167-2009 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
   
  8P-5343 [1] FILTER ELEMENT-CAB AIR  
  133-5673 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
  275-2604 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  1G-8878 [5] FILTER-OIL (ADVANCED EFFICIENCY)  
  126-1817 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)  
  2S-8439 [1] SEAL-O-RING  
  5F-0149 [1] SEAL-O-RING  
  6F-4855 [1] SEAL-O-RING  
  7M-8485 [4] SEAL-O-RING  
 

#SEBP39061814
 

388-2220: KIT-PREVENTIVE MAINTENANCE

388-2220 KIT-PREVENTIVE MAINTENANCE
S/N BXY1-UP
1000 HOURS
i04760345 SEBP3906
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  169-8373 [9] BOTTLE GP-FLUID SAMPLING  
   
  326-1643 [1] FILTER AS-WATER SEP & FUEL  
   
  106-3969 [1] FILTER ELEMENT AS-AIR (PRIMARY)  
  1R-0732 [2] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)  
  167-2009 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
  8P-5343 [1] FILTER ELEMENT-CAB AIR  
  9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
  275-2604 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  1G-8878 [5] FILTER-OIL (ADVANCED EFFICIENCY)  
  2J-0157 [1] SEAL-O-RING  
  2S-8439 [1] SEAL-O-RING  
  5F-0149 [1] SEAL-O-RING  
  6F-4855 [1] SEAL-O-RING  
  6J-2419 [1] SEAL-O-RING  
  7M-8485 [4] SEAL-O-RING  
 

#SEBP39061815
 

388-2221: KIT-PREVENTIVE MAINTENANCE

388-2221 KIT-PREVENTIVE MAINTENANCE
S/N BXY1-UP
2000 HOURS
i04760346 SEBP3906
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  169-8373 [9] BOTTLE GP-FLUID SAMPLING  
   
  4N-4668 [1] BREATHER AS (ENGINE)  
  7S-7809 [1] CAP AS-RADIATOR  
  106-3969 [1] FILTER ELEMENT AS-AIR (PRIMARY)  
  167-2009 [1] FILTER ELEMENT AS-OIL (ULTRA HIGH EFFICIENCY)  
  6I-2506 [1] FILTER ELEMENT AS-AIR (SECONDARY)  
  1R-0732 [2] FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)  
  326-1643 [1] FILTER AS-WATER SEP & FUEL  
  507-0646 [1] BREATHER AS  
  3D-2824 SEAL-O-RING  
   
  9G-5127 [1] BREATHER (ATMOSPHERIC)  
  8P-5343 [1] FILTER ELEMENT-CAB AIR  
  9M-2341 [1] FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)  
  275-2604 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  1G-8878 [5] FILTER-OIL (ADVANCED EFFICIENCY)  
  2P-3230 [1] GASKET  
  5S-4629 [2] GASKET-VALVE  
  5S-1213 [1] PLATE-PRESSURE VALVE  
  2S-8439 [1] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
  3J-1907 [4] SEAL-O-RING  
  5F-0149 [1] SEAL-O-RING  
  5M-2057 [1] SEAL-O-RING  
  6F-4855 [1] SEAL-O-RING  
  6J-2419 [1] SEAL-O-RING  
  7M-8485 [8] SEAL-O-RING  
  8H-2778 [1] SEAL-RING  
  6U-1989 [3] VALVE-RELIEF  
 

#SEBP39061816
 

509-9360: KIT-PREVENTIVE MAINTENANCE

509-9360 KIT-PREVENTIVE MAINTENANCE
S/N BXY1-UP
500 HOUR PREVENTATIVE MAINTENANCE KIT
i06904858 SEBP3906
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  423-8524 Y [1] FILTER GP-WATER SEP & FUEL  
  337-5270 [1] FILTER ELEMENT AS-OIL (TRANSMISSION)  
  095-1678 [1] SEAL-O-RING  
  1R-1808 [1] FILTER-ENGINE OIL (ADVANCED EFFICIENCY)  
  1R-0762 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
  465-6502 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP39061817
 

226-1970: LINES GP-DIAGNOSTIC

226-1970 LINES GP-DIAGNOSTIC -XMSN, LOCKUP TORQUE CONVERTER-REMOTE PRESSURE TAPS
S/N BXY1-2172
PART OF 231-7842 TORQUE CONVERTER AR-LOCKUP
i01967325 SEBP3906
2261970 LINES GP-DIAGNOSTIC Parts scheme 2261970 LINES GP-DIAGNOSTIC Parts scheme 2261970 LINES GP-DIAGNOSTIC Parts scheme 2261970 LINES GP-DIAGNOSTIC Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-6205 [3] SPACER (0.438X0.875X1.281-IN THK)  
2. 6V-0852 [10] CAP-DUST  
3. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
4. 165-6750 [1] BRACKET AS  
  8T-3597 M [1] NUT-WELD (M12X1.75-THD)  
5. 185-6250 [10] FITTING AS  
6. 228-4388 [1] BRACKET  
7. 228-4389 [1] HOSE AS (TC IMPELLER CLUTCH PRESSURE)  
8. 228-4390 [1] HOSE AS (TC LOCKUP CLUTCH PRESSURE)  
9. 228-4391 [1] HOSE AS (TORQUE CONVERTER OUTLET PRESS)  
10. 228-4392 [1] HOSE AS (TORQUE CONVERTER INLET PRESS)  
11. 228-4393 [1] HOSE AS (XMSN CLUTCH 6 PRESSURE)  
12. 228-4394 [1] HOSE AS (XMSN CLUTCH 5 PRESSURE)  
13. 228-4395 [1] HOSE AS (XMSN CLUTCH 4 PRESSURE)  
14. 228-4396 [1] HOSE AS (XMSN CLUTCH 3 PRESSURE)  
15. 228-4397 [1] HOSE AS (XMSN CLUTCH 2 PRESSURE)  
16. 228-4403 [1] HOSE AS (XMSN CLUTCH 1 PRESSURE)  
17. 148-8325 [9] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8641 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
18. 148-8368 [1] ELBOW AS  
  6V-8627 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
19. 170-4735 [10] RING-RETAINING  
20. 1S-6420 [1] CLIP  
21. 4J-5477 [10] SEAL-O-RING  
22. 6D-4246 [3] CLIP (LOOP)  
23. 6V-1228 [1] CLIP  
24. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
25. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
26. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
27. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 8T-6466 M [3] BOLT (M10X1.5X60-MM)  
29. 9X-8250 [2] CLIP (LOOP)  
30. 206-2723 E GUARD-HOSE (94.5-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP39061818
 

226-1971: LINES GP-DIAGNOSTIC

226-1971 LINES GP-DIAGNOSTIC -TRANSMISSION, STANDARD TC-REMOTE PRESSURE TAPS
S/N BXY1-2171
PART OF 231-7844 TORQUE CONVERTER AR-LOCKUP
i01967385 SEBP3906
2261971 LINES GP-DIAGNOSTIC Parts scheme 2261971 LINES GP-DIAGNOSTIC Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-6205 [3] SPACER (0.438X0.875X1.281-IN THK)  
2. 6V-0852 [9] CAP-DUST  
3. 118-6878 [1] BRACKET AS  
4. 165-6750 [1] BRACKET AS  
5. 185-6250 [9] FITTING AS  
6. 228-4388 [1] BRACKET  
7. 228-4389 [1] HOSE AS (TC IMPELLER CLUTCH PRESSURE)  
8. 228-4391 [1] HOSE AS (TORQUE CONVERTER OUTLET PRESS)  
9. 228-4392 [1] HOSE AS (TORQUE CONVERTER INLET PRESS)  
10. 228-4393 [1] HOSE AS (XMSN CLUTCH 6 PRESSURE)  
11. 228-4394 [1] HOSE AS (XMSN CLUTCH 5 PRESSURE)  
12. 228-4395 [1] HOSE AS (XMSN CLUTCH 4 PRESSURE)  
13. 228-4396 [1] HOSE AS (XMSN CLUTCH 3 PRESSURE)  
14. 228-4397 [1] HOSE AS (XMSN CLUTCH 2 PRESSURE)  
15. 228-4403 [1] HOSE AS (XMSN CLUTCH 1 PRESSURE)  
16. 148-8325 [8] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8641 [1] CONNECTOR  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
17. 148-8368 [1] ELBOW AS  
  6V-8627 [1] ELBOW  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
18. 170-4735 [9] RING-RETAINING  
19. 4J-5477 [9] SEAL-O-RING  
20. 6V-1228 [1] CLIP  
21. 6V-2383 [2] CLIP  
22. 8M-2773 [3] CLIP (LOOP)  
23. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
25. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
26. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 8T-6466 M [3] BOLT (M10X1.5X60-MM)  
28. 9X-8250 [3] CLIP (LOOP)  
29. 206-2723 E GUARD-HOSE (95-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP39061819
 

311-7600: LINES GP-DIAGNOSTIC

311-7600 LINES GP-DIAGNOSTIC
S/N BXY2173-3999
PART OF 231-7842 TORQUE CONVERTER AR-LOCKUP
i02928075 SEBP3906
3117600 LINES GP-DIAGNOSTIC Parts scheme 3117600 LINES GP-DIAGNOSTIC Parts scheme
  For full view, you need register

Parts for your 988H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6B-6205 [3] SPACER (0.438X0.875X1.281-IN THK)  
2. 6V-0852 [10] CAP-DUST  
3. 118-6878 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
4. 165-6750 [1] BRACKET AS  
5. 185-6250 [10] FITTING AS  
6. 311-7595 [1] BRACKET  
7. 311-7596 [1] HOSE AS  
8. 311-7597 [1] HOSE AS  
9. 311-7598 [1] HOSE AS  
10. 311-7599 [1] HOSE AS  
11. 311-7603 [1] HOSE AS  
12. 311-7604 [1] HOSE AS  
13. 311-7605 [1] HOSE AS  
14. 311-7606 [1] HOSE AS  
15. 311-7607 [1] HOSE AS  
16. 311-7608 [1] HOSE AS  
17. 148-8325 [9] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8641 [1] CONNECTOR  
18. 148-8368 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  4J-5477 [1] SEAL-O-RING  
  6V-8627 [1] ELBOW  
19. 170-4735 [10] RING-RETAINING  
20. 1S-0994 [3] CLIP (LOOP)  
21. 1S-6420 [1] CLIP  
22. 223-3490 [3] CLIP  
23. 4J-5477 [10] SEAL-O-RING  
24. 6V-1228 [1] CLIP  
25. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
27. 8T-4139 M [3] BOLT (M12X1.75X30-MM)  
28. 8T-4223 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-6466 M [3] BOLT (M10X1.5X60-MM)  
30. 206-2723 E GUARD-HOSE (33-CM)  
30A. 206-2723 E GUARD-HOSE (37-CM)  
31. 7I-1024 E GUARD-HOSE (54-CM)  
32. 5I-4200 E GUARD (34-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

Information:

Truck Engine News
The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/31
Engine News
The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/22
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 24M MOTOR GRADERS, 385C, AND 390D EXCAVATORS, 631G WHEEL TRACTOR-SCRAPERS, 772 OFF-HIGHWAY TRUCKS, 834H WHEEL DOZERS, 988H WHEEL LOADERS, AD45B UNDERGROUND ARTICULATED TRUCKS, D9T TRACK-TYPE TRACTORS, PM-200, AND PM-201 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 24M MOTOR GRADERS, 385C, AND 390D EXCAVATORS, 631G WHEEL TRACTOR-SCRAPERS, 772 OFF-HIGHWAY TRUCKS, 834H WHEEL DOZERS, 988H WHEEL LOADERS, AD45B UNDERGROUND ARTICULATED TRUCKS, D9T TRACK-TYPE TRACTORS, PM-200, AND PM-201 COLD PLANERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 24M MOTOR GRADERS, 385C, AND 390D EXCAVATORS, 631G WHEEL TRACTOR-SCRAPERS, 772 OFF-HIGHWAY TRUCKS, 834H WHEEL DOZERS, 988H WHEEL LOADERS, AD45B UNDERGROUND ARTICULATED TRUCKS, D9T TRACK-TYPE TRACTORS, PM-200, AND PM-201 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 24M MOTOR GRADERS, 385C, AND 390D EXCAVATORS, 631G WHEEL TRACTOR-SCRAPERS, 772 OFF-HIGHWAY TRUCKS, 834H WHEEL DOZERS, 988H WHEEL LOADERS, AD45B UNDERGROUND ARTICULATED TRUCKS, D9T TRACK-TYPE TRACTORS, PM-200, AND PM-201 COLD PLANERS
Service Letter-Asia
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 24M MOTOR GRADERS, 385C, AND 390D EXCAVATORS, 631G WHEEL TRACTOR-SCRAPERS, 772 OFF-HIGHWAY TRUCKS, 834H WHEEL DOZERS, 988H WHEEL LOADERS, AD45B UNDERGROUND ARTICULATED TRUCKS, D9T TRACK-TYPE TRACTORS, PM-200, AND PM-201 COLD PLANERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CYLINDER LINERS ON CERTAIN 24M MOTOR GRADERS, 385C, AND 390D EXCAVATORS, 631G WHEEL TRACTOR-SCRAPERS, 772 OFF-HIGHWAY TRUCKS, 834H WHEEL DOZERS, 988H WHEEL LOADERS, AD45B UNDERGROUND ARTICULATED TRUCKS, D9T TRACK-TYPE TRACTORS, PM-200, AND PM-201 COLD PLANERS
Disassembly and Assembly
Duo-Cone Conventional Seals - Install
988H and 988K Wheel Loaders Power Train
Service Magazine
Improvement to the Seal Reduces Leaks in the Transfer Case {3159}
2004/01/26
An Improved Three-Piece Oil Pan Gasket is Now Used {1302, 7555}
2007/12/31
New C18 Cylinder Liners and O-ring Seals are Used {1201, 1216, 1216}
2008/08/11
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2009/01/26
A New Gasket is Used in the Engine Oil Pan Group {1302}
2009/01/26
An Improved Seal is Used {1157, 7555}
2009/02/02
Improved Gaskets for the Oil Filter Base Are Now Used on Certain Engines {1306, 1308, 7555}
2009/10/29
A New Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on Certain Machine Engines {1124, 1201, 7555}
2010/03/02
The 1U-8846 Gasket Sealant Is Canceled {7555}
2011/02/02
A New Oil Pan Gasket Is Available for Certain C15 and C18 Tier 3 Machine Engines {1302, 7555}
2012/04/17
Valve Cover Isolation Seals Are Now Used on Certain Machines {1107, 7555}
2011/12/07
A New Improved Seal Is Now Used in the Reman Water Pumps in the Engines of Certain Machines {1000, 1361, 7555}
2012/05/10
New Water Pump Seal and Pumps Used on Certain 3500, G3500, and C175 Engines {1361, 7555}
2013/12/16
An Improved Valve Cover Seal Is Used on Certain Machine Engines {1107, 7553, 7555}
2014/07/31

Caterpillar Parts SIS Catalog 988H :

KIT-GASKET
348-3295 KIT-GASKET
FILM GP
291-5560 FILM GP
FILM GP
252-9667 FILM GP
FILM GP
236-7530 FILM GP
CAP GP-PROTECTION
9G-9288 CAP GP-PROTECTION
TIP-PENETRATION
135-9600 TIP-PENETRATION
7Y-0602 TIP-LONG
TIP-LONG
264-2226 TIP-LONG
492-1201 KIT-GASKET
388-1992 KIT-PREVENTIVE MAINTENANCE
388-2217 KIT-PREVENTIVE MAINTENANCE
388-2220 KIT-PREVENTIVE MAINTENANCE
388-2221 KIT-PREVENTIVE MAINTENANCE
509-9360 KIT-PREVENTIVE MAINTENANCE
LINES GP-DIAGNOSTIC
226-1970 LINES GP-DIAGNOSTIC
LINES GP-DIAGNOSTIC
226-1971 LINES GP-DIAGNOSTIC

Truck sale:

 
 
Caterpillar 988H
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 988H, Wheel Loaders, Construction
 
Caterpillar 988H, Wheel Loaders, Construction
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 988H, Wheel Loaders, Construction
 
Caterpillar 988H, Wheel Loaders, Construction
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
Caterpillar 988H, Wheel Loaders, Construction
114,704 
Caterpillar 988H, Wheel Loaders, Construction
- Wheel Loaders
CAVPOWER
Caterpillar 988H, Wheel Loaders, Construction
1,008,026 
Caterpillar 988H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CANADA
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.