315-4400 KIT-PUMP S/N NBD142-840; MEY173-310 FIELD REPLACEMENT FOR @@@@@283-6116@@@@@ 330D L EXCAVATOR

315-4400: KIT-PUMP

315-4400 KIT-PUMP
S/N NBD142-840; MEY173-310
FIELD REPLACEMENT FOR @@@@@283-6116@@@@@

Parts for your 330D L EXCAVATOR:

Part No	Qty	Parts name
315-4393 Y	[1]	PUMP GP-PISTON & GEAR
		-OR-
322-8733 Y	[1]	PUMP GP-MAIN HYDRAULIC

8T-4189 M	[4]	BOLT (M8X1.25X20-MM)
132-5789	[2]	CLIP (LADDER)
307-5129	[1]	CONNECTOR AS
2S-4078	[1]	SEAL-O-RING
5K-9090	[1]	SEAL-O-RING
307-5130	[1]	CONNECTOR
221-8912	[2]	FLANGE
319-0908	[1]	HARNESS AS-SENSOR
319-0909	[1]	HARNESS AS-SENSOR
260-2180	[2]	SENSOR AS-PRESSURE
095-1777	[1]	RING-BACKUP
260-2191	[1]	SEAL-O-RING
7K-1181	[2]	STRAP-CABLE
307-5123	[1]	SUPPORT AS
8T-4224	[4]	WASHER-HARD (8.8X16X2-MM THK)
M		METRIC PART
R		REMANUFACTURED PART MAY BE AVAILABLE
Y		SEPARATE ILLUSTRATION

482-9910: KIT-VALVE

KIT-VALVE

482-9910 KIT-VALVE
S/N GBC1-UP; NBD1-UP; MEY1-UP
****PROVIDES A NEW UPGRADE KIT (VALVE AR-CHECK & RELIEF) FOR THE BOOM LOWERING CONTROL
FOR USE WITH SPECIAL INSTRUCTIONS REHS8138 FOR INSTALLATION OF KIT
FIELD INSTALLATION

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
4I-0800 I	[1]	HOSE AS
4I-0818 I	[1]	HOSE AS
7K-1181	[15]	STRAP-CABLE
087-6583 I	[1]	HOSE AS
113-6738 I	[1]	HOSE AS
133-5813	[2]	BAND-MARKER (GRAY, P)
266-0982	[1]	GUARD

		(ABOVE PARTS ARE PART OF THE 255-1855 PILOT LINES GROUP.)

3K-0360	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-9876	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8363 ADAPTER ASSEMBLY.)

6V-8397	[2]	SEAL-O-RING
6V-9836	[1]	TEE-SWIVEL

		(ABOVE PARTS ARE PART OF THE 148-8433 ADAPTER ASSEMBLY.)

1P-3702	[2]	SEAL-RECTANGULAR
1P-3703	[2]	SEAL-RECTANGULAR
4J-5268	[1]	SEAL-O-RING
5K-9090	[2]	SEAL-O-RING
6V-9746	[1]	SEAL-O-RING
7M-8485	[1]	SEAL-O-RING
8T-5005 M	[4]	BOLT (M10X1.5X70-MM)
185-0488	[1]	BLOCK
207-6449	[1]	BLOCK
223-6732	[1]	TUBE AS

		(ABOVE PARTS ARE PART OF THE 255-2077 RETURN LINES GROUP.)

5K-9090	[1]	SEAL-O-RING
6V-9008	[1]	ELBOW
7M-8485	[1]	SEAL-O-RING

		(ABOVE PARTS ARE PART OF THE 148-8357 ADAPTER ASSEMBLY.)

3K-0360	[1]	SEAL-O-RING
9S-4185	[1]	PLUG (3/4-16-THD)

		(ABOVE PARTS ARE PART OF THE 148-8411 PLUG ASSEMBLY.)

124-2123	[1]	COUPLING-ORFS
124-2155	[1]	COUPLING AS

		(ABOVE PARTS ARE PACKAGED WITH 194-0354, & 111-CM 122-6883.)

124-2121	[1]	COUPLING-PERMANENT
124-2153	[1]	COUPLING

		(ABOVE PARTS ARE PACKAGED WITH 260-8086, & 119-CM 122-6882.)

432-2105	[1]	COUPLING AS
432-2111	[1]	COUPLING AS

		(ABOVE PARTS ARE PACKAGED WITH 275-1418, 82-CM 161-1818, & 85-CM 7Y-5074.)

8T-8899	[1]	ELBOW
228-7092	[1]	SEAL-O-RING

		(ABOVE PARTS ARE PART OF THE 329-5528 ELBOW ADAPTER ASSEMBLY.)

1P-3703	[2]	SEAL-RECTANGULAR
1P-3704	[2]	SEAL-RECTANGULAR
4I-9521	[2]	BAND-MARKER (RED, L1)
4I-9522	[2]	BAND-MARKER (YELLOW, L2)
4I-9525	[2]	BAND-MARKER (ORANGE, R1)
4I-9526	[2]	BAND-MARKER (WHITE, R2)
5K-9090	[2]	SEAL-O-RING
7J-9108	[2]	SEAL-O-RING
7K-1181	[22]	STRAP-CABLE
8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
8T-4139 M	[10]	BOLT (M12X1.75X30-MM)
8T-4176 M	[2]	BOLT (M12X1.75X90-MM)
8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
8T-4223	[20]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4648 M	[8]	BOLT (M12X1.75X70-MM)
108-3819 M	[8]	BOLT-SOCKET HEAD (M12X1.75X70-MM)
108-7550	[4]	CLIP
149-1738	[4]	CLIP
245-5120	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
245-5122	[1]	BLOCK
263-1962 Y	[2]	VALVE GP-LOAD CONTROL (BOOM LOWERING, DRIFT REDUCTION)
270-5692 Y	[1]	VALVE GP-MANUAL (BOOM LOWER)
418-9212	[1]	TUBE AS
418-9213	[1]	TUBE AS
418-9214	[1]	PIPE AS
418-9216	[1]	PIPE AS
465-5185	[2]	SUPPORT AS
		(EACH INCLUDES)
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
465-5188	[1]	SUPPORT AS
465-5190	[1]	SUPPORT AS

		(ABOVE PARTS ARE PART OF THE 418-5071 BOOM CYLINDER LINES GROUP

3J-1907	[8]	SEAL-O-RING
6V-8397	[8]	SEAL-O-RING
6V-8636	[8]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8336 ADAPTER ASSEMBLIES.)

3D-2824	[4]	SEAL-O-RING
6V-8713	[4]	CONNECTOR
7J-9108	[4]	SEAL-O-RING

		(ABOVE PARTS ARE PART OF THE 148-8341 ADAPTER ASSEMBLIES.)

3D-2824	[1]	SEAL-O-RING
6V-9007	[1]	ELBOW
6V-9746	[1]	SEAL-O-RING

		(ABOVE PARTS ARE PART OF THE 148-8347 ADAPTER ASSEMBLY.)

3J-7354	[2]	SEAL-O-RING
6V-8397	[2]	SEAL-O-RING
6V-9200	[2]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8361 ADAPTER ASSEMBLIES.)

3J-1907	[4]	SEAL-O-RING
6V-8397	[4]	SEAL-O-RING
6V-8724	[4]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8378 ADAPTER ASSEMBLIES.)

3K-0360	[1]	SEAL-O-RING
9S-4185	[1]	PLUG (3/4-16-THD)

		(ABOVE PARTS ARE PART OF THE 148-8411 PLUG ASSEMBLY.)

124-2114	[4]	COUPLING

		(ABOVE PARTS ARE PACKAGED WITH 2-245-5110, 442-CM 122-6879, & 530-CM 7I-7439.)

124-2114	[4]	COUPLING

		(ABOVE PARTS ARE PACKAGED WITH 2-245-5113, 486-CM 122-6879, & 426-CM 7I-7439.)

323-6157	[4]	COUPLING AS-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 2-245-5116, 300-CM 161-1815, & 426-CM 7I-7439.)

124-2119	[1]	COUPLING-PERMANENT
124-2150	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 2-260-8278, 105-CM 122-6881, & 123-CM 7I-1024.)

I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART
Y		SEPARATE ILLUSTRATION

482-9911: KIT-VALVE

KIT-VALVE

482-9911 KIT-VALVE
S/N GBC1-UP; NBD1-UP; MEY1-UP
+TO PROVIDE A NEW UPGRADE KIT (VALVE AR-CHECK & RELIEF) FOR BOOM LOWERING CONTROL
FOR USE WITH SPECIAL INSTRUCTIONS REHS8138 FOR INSTALLATION OF KIT
FIELD INSTALLATION

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-3705	[2]	SEAL-RECTANGULAR
6V-8397	[2]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-6868 M	[4]	BOLT (M12X1.75X80-MM)
093-1290	[1]	CLAMP
093-1294	[2]	CLAMP
108-1782 M	[4]	BOLT-SOCKET HEAD (M12X1.75X90-MM)
202-6752	[1]	SUPPORT AS
216-6515	[2]	CLIP
259-7692 Y	[1]	VALVE GP-LOAD CONTROL (DRIFT REDUCTION, VAR ADJ BOOM)
268-7208	[1]	TUBE AS
268-7209	[1]	TUBE AS
268-7211	[1]	TUBE AS
268-7213	[1]	TUBE AS
447-1708 M	[2]	BOLT (M16X2X80-MM)
447-1711 M	[2]	BOLT (M16X2X50-MM)
451-2175	[4]	WASHER-HARD (17.5X30X3.5-MM THK)
465-5193	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
465-5196	[1]	SUPPORT AS

		(ABOVE PARTS ARE PART OF THE 237-3199 STICK CYLINDER LINES GROUP (STICK LOWERING CONTROL.)

3D-2824	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-8633	[1]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8328 ADAPTER ASSEMBLY.)

3J-1907	[2]	SEAL-O-RING
4J-5477	[2]	SEAL-O-RING
6V-8627	[2]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8368 ADAPTER ASSEMBLIES.)

5Q-4212	[2]	CLIP
6V-8398	[2]	SEAL-O-RING
6V-9168	[2]	NUT (11/16-16-THD)
7K-1181	[5]	STRAP-CABLE
8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
8T-4223	[10]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4244 M	[8]	NUT (M12X1.75-THD)
8T-5001 M	[2]	BOLT (M12X1.75X130-MM)
179-5235	[8]	CLIP
179-5254	[2]	PLATE
193-6662	[1]	PLATE
212-5419 I	[2]	HOSE AS
282-5718	[1]	TUBE AS
356-8170	[1]	PLATE
447-1704 M	[2]	BOLT (M16X2X90-MM)
451-2175	[2]	WASHER-HARD (17.5X30X3.5-MM THK)

		(ABOVE PARTS ARE PART OF THE 237-3200 BOOM LINES GROUP.)

149-8476	[4]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 5I-4393, & 83-CM 205-3719.)

6V-8397	[4]	SEAL-O-RING
6V-8994	[2]	UNION (STRAIGHT)

		(ABOVE PARTS ARE PART OF THE 149-5452 ADAPTER ASSEMBLIES.)

4I-9523	[4]	BAND-MARKER (BLUE, L3)
7K-1181	[9]	STRAP-CABLE
133-5813	[2]	BAND-MARKER (GRAY, P)
201-9379	[1]	BLOCK

		(ABOVE PARTS ARE PART OF THE 255-1854 PILOT LINES GROUP.)

149-8474	[1]	COUPLING-PERMANENT
149-8501	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 269-9944, 349-CM 205-3717, & 177-CM 7I-3717.)

149-8474	[1]	COUPLING-PERMANENT
149-8501	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 285-2592, 190-CM 205-3717, & 218-CM 7I-7439.)

3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8636	[1]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8336 ADAPTER ASSEMBLY.)

3K-0360	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-8625	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8364 ADAPTER ASSEMBLY.)

3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8724	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8378 ADAPTER ASSEMBLY.)

6V-8397	[4]	SEAL-O-RING
6V-9836	[2]	TEE-SWIVEL

		(ABOVE PARTS ARE PART OF THE 148-8433 ADAPTER ASSEMBLIES.)

149-8476	[2]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 116-CM 205-3719 & 156-CM 7I-7439.)

I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART
Y		SEPARATE ILLUSTRATION

483-5893: KIT-VALVE

KIT-VALVE

483-5893 KIT-VALVE
S/N GBC1-UP; NBD1-UP; MEY1-UP
***PROVIDE A NEW UPGRADE KIT (VALVE AR-CHECK & RELIEF) FOR BOOM LOWERING CONTROL
FOR USE WITH SPECIAL INSTRUCTIONS REHS8138 FOR INSTALLATION OF KIT
FIELD INSTALLATION

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Part No	Qty	Parts name
1P-3705	[2]	SEAL-RECTANGULAR
6V-8397	[2]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
8T-4121	[7]	WASHER-HARD (11X21X2.5-MM THK)
8T-4186 M	[3]	BOLT (M10X1.5X40-MM)
8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-6868 M	[4]	BOLT (M12X1.75X80-MM)
093-1290	[1]	CLAMP
093-1294	[2]	CLAMP
108-1782 M	[4]	BOLT-SOCKET HEAD (M12X1.75X90-MM)
202-6752	[1]	SUPPORT AS
216-6515	[2]	CLIP
259-7692 Y	[1]	VALVE GP-LOAD CONTROL (DRIFT REDUCTION, VAR ADJ BOOM)
268-7208	[1]	TUBE AS
268-7209	[1]	TUBE AS
268-7211	[1]	TUBE AS
268-7213	[1]	TUBE AS
447-1708 M	[2]	BOLT (M16X2X80-MM)
447-1711 M	[2]	BOLT (M16X2X50-MM)
451-2175	[4]	WASHER-HARD (17.5X30X3.5-MM THK)
465-5193	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)
465-5196	[1]	SUPPORT AS
465-5193	[1]	SUPPORT AS
8T-3490 M	[2]	NUT-WELD (M10X1.5-THD)

		(ABOVE PARTS ARE PART OF THE 237-3199 STICK CYLINDER LINES GROUP (STICK LOWERING CONTROL.)

3D-2824	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-8633	[1]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8328 ADAPTER ASSEMBLY.)

3J-1907	[2]	SEAL-O-RING
4J-5477	[2]	SEAL-O-RING
6V-8627	[2]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8368 ADAPTER ASSEMBLIES.)

5Q-4212	[2]	CLIP
6V-8398	[2]	SEAL-O-RING
6V-9168	[2]	NUT (11/16-16-THD)
7K-1181	[4]	STRAP-CABLE
8T-4139 M	[6]	BOLT (M12X1.75X30-MM)
8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
8T-4244 M	[6]	NUT (M12X1.75-THD)
8T-5001 M	[2]	BOLT (M12X1.75X130-MM)
143-4294 I	[2]	HOSE AS
179-5235	[6]	CLIP
179-5254	[2]	PLATE
193-6662	[1]	PLATE
282-5722	[1]	TUBE AS
356-8170	[1]	PLATE
447-1704 M	[2]	BOLT (M16X2X90-MM)
451-2175	[2]	WASHER-HARD (17.5X30X3.5-MM THK)

		(ABOVE PARTS ARE PART OF THE 237-3202 BOOM LINES GROUP.)

149-8476	[2]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 5I-4393, & 83-CM 205-3719.)

6V-8397	[4]	SEAL-O-RING
6V-8994	[2]	UNION (STRAIGHT)

		(ABOVE PARTS ARE PART OF THE 149-5452 ADAPTER ASSEMBLY.)

4I-9523	[4]	BAND-MARKER (BLUE, L3)
7K-1181	[9]	STRAP-CABLE
133-5813	[2]	BAND-MARKER (GRAY, P)
201-9379	[1]	BLOCK

		(ABOVE PARTS ARE PART OF THE 255-1854 PILOT LINES GROUP.)

3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8636	[1]	CONNECTOR

		(ABOVE PARTS ARE PART OF THE 148-8336 ADAPTER ASSEMBLY.)

3K-0360	[1]	SEAL-O-RING
6V-8398	[1]	SEAL-O-RING
6V-8625	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8364 ADAPTER ASSEMBLY.)

3J-1907	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
6V-8724	[1]	ELBOW

		(ABOVE PARTS ARE PART OF THE 148-8378 ADAPTER ASSEMBLY.)

6V-8397	[4]	SEAL-O-RING
6V-9836	[2]	TEE-SWIVEL

		(ABOVE PARTS ARE PART OF THE 148-8433 ADAPTER ASSEMBLIES.)

149-8474	[1]	COUPLING-PERMANENT
149-8501	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 269-9944, 349-CM 205-3717, & 177-CM 7I-7439.)

149-8474	[1]	COUPLING-PERMANENT
149-8501	[1]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 285-2592, 190-CM 205-3717, & 218-CM 7I-7439.)

149-8476	[2]	COUPLING-PERMANENT

		(ABOVE PARTS ARE PACKAGED WITH 116-CM 205-3719, & 156-CM 7I-7439 & 437-0481.)

I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART
Y		SEPARATE ILLUSTRATION

234-6613: LEVER GP-CONTROL

LEVER GP-CONTROL

234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
PART OF 245-7923, 421-1434 CONSOLE GP-OPERATOR

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[1]	STRAP-CABLE
2.	4I-3038	[2]	WASHER (3.3X8X0.5-MM THK)
3.	111-4799	[1]	SWITCH AS-LIMIT (HYDRAULIC LOCKOUT)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	5P-5998 D		TUBE (0.3-M)
4.	185-8286 M	[2]	SCREW-MACHINE (M4X0.7X8-MM)
5.	234-6615	[1]	KNOB
6.	087-4683	[2]	LOCKWASHER
7.	120-9027 M	[2]	SCREW-PAN HEAD (M3X0.5X16-MM)
	D		ORDER BY THE METER
	M		METRIC PART

237-3191: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

237-3191 LINES GP-AUXILIARY HYDRAULIC -REACH BOOM, HIGH PRESSURE
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
Type 1
AN ATTACHMENT

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-4139 M	[12]	BOLT (M12X1.75X30-MM)
2.	447-1703 M	[8]	BOLT (M16X2X120-MM)
3.	8T-4183 M	[16]	BOLT (M12X1.75X40-MM)
4.	8T-4184 M	[4]	BOLT (M12X1.75X45-MM)
5.	8T-4194 M	[20]	BOLT (M12X1.75X50-MM)
6.	173-7916	[16]	CLAMP-HALF
7.	1P-5767	[8]	FLANGE-HALF
8.	202-6758 I	[2]	HOSE AS
9.	216-6578	[2]	PLATE
10.	253-6434	[2]	PLATE
11.	253-6441	[4]	PLATE
12.	1P-3704	[4]	SEAL-RECTANGULAR
13.	1P-3705	[4]	SEAL-RECTANGULAR
14.	193-6648	[1]	TUBE AS
15.	193-6650	[1]	TUBE AS
16.	197-2100	[1]	TUBE AS
17.	197-2101	[1]	TUBE AS
18.	216-6579	[1]	TUBE AS
19.	216-6580	[1]	TUBE AS
20.	451-2175	[8]	WASHER-HARD (17.5X30X3.5-MM THK)
21.	8T-4223	[36]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

237-3191: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

237-3191 LINES GP-AUXILIARY HYDRAULIC -REACH BOOM, HIGH PRESSURE
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
Type 2
AN ATTACHMENT

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	132-1596 C	[4]	PLATE
2.	193-6648	[1]	TUBE AS
3.	193-6650	[1]	TUBE AS
4.	197-2100	[1]	TUBE AS
5.	197-2101	[1]	TUBE AS
6.	202-6758 I	[2]	HOSE AS
7.	216-6579	[1]	TUBE AS
8.	216-6580	[1]	TUBE AS
9.	368-9399 C	[2]	PLATE
10.	368-9402 C	[1]	PLATE
11.	368-9403 C	[1]	PLATE
12.	447-1703 M	[8]	BOLT (M16X2X120-MM)
13.	451-2175 C	[20]	WASHER-HARD (17.5X30X3.5-MM THK)
14.	453-1259 CM	[12]	BOLT (M16X2X40-MM)
15.	173-7916 C	[4]	CLAMP-HALF
16.	1P-3704	[4]	SEAL-RECTANGULAR
17.	1P-3705	[4]	SEAL-RECTANGULAR
18.	1P-5767	[8]	FLANGE-HALF
19.	306-1354 C	[12]	CLAMP-HALF
20.	8T-4183 CM	[20]	BOLT (M12X1.75X40-MM)
21.	8T-4194 M	[20]	BOLT (M12X1.75X50-MM)
22.	8T-4223 C	[24]	WASHER-HARD (13.5X25.5X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

237-3192: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

237-3192 LINES GP-AUXILIARY HYDRAULIC -REACH BOOM, HIGH PRESSURE
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
Type 1
AN ATTACHMENT

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	179-5090	[1]	PLATE
2.	193-6662	[1]	PLATE
3.	202-7021	[2]	CLIP
4.	245-2184	[1]	TUBE AS
5.	245-2187	[1]	TUBE AS
6.	245-2190	[1]	TUBE AS
7.	245-2193	[1]	TUBE AS
8.	245-2196	[1]	TUBE AS
9.	245-2199	[1]	TUBE AS
10.	253-6458	[2]	CLIP AS
12.	268-7112	[8]	CLIP
13.	253-6585	[1]	PLATE
14.	253-6586	[1]	PLATE
15.	093-1291	[4]	CLAMP
16.	6V-8398	[4]	SEAL-O-RING
17.	7J-9108	[4]	SEAL-O-RING
18.	7X-2555 M	[2]	BOLT (M16X2X80-MM)
19.	7Y-3732	[2]	CLIP
20.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
21.	8T-4133 M	[4]	NUT (M10X1.5-THD)
22.	8T-4139 M	[12]	BOLT (M12X1.75X30-MM)
23.	8T-4184 M	[4]	BOLT (M12X1.75X45-MM)
24.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
25.	8T-4223	[18]	WASHER-HARD (13.5X25.5X3-MM THK)
26.	8T-4244 M	[12]	NUT (M12X1.75-THD)
27.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
28.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
	M		METRIC PART

237-3192: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

237-3192 LINES GP-AUXILIARY HYDRAULIC -REACH BOOM, HIGH PRESSURE
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
Type 2
AN ATTACHMENT

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	179-5090	[1]	PLATE
2.	193-6662	[1]	PLATE
3.	202-7021	[2]	CLIP
4.	245-2184	[1]	TUBE AS
5.	245-2187	[1]	TUBE AS
6.	245-2190	[1]	TUBE AS
7.	245-2193	[1]	TUBE AS
8.	245-2196	[1]	TUBE AS
9.	245-2199	[1]	TUBE AS
10.	253-6458	[1]	CLIP AS
11.	268-7112	[8]	CLIP
12.	288-7412 C	[2]	CLIP AS
13.	288-7413 C	[2]	CLIP AS
14.	288-7416 C	[1]	PLATE
15.	288-7417 C	[1]	PLATE
16.	288-7641	[1]	CLIP AS
17.	093-1291 C	[2]	CLAMP
18.	6V-8398	[4]	SEAL-O-RING
19.	7J-9108	[4]	SEAL-O-RING
20.	7X-2555 M	[2]	BOLT (M16X2X80-MM)
21.	7Y-3732	[2]	CLIP
22.	8T-4121 C	[2]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4133 CM	[2]	NUT (M10X1.5-THD)
24.	8T-4139 M	[12]	BOLT (M12X1.75X30-MM)
25.	8T-4184 M	[4]	BOLT (M12X1.75X45-MM)
26.	8T-4185 CM	[2]	BOLT (M10X1.5X50-MM)
27.	8T-4194 CM	[4]	BOLT (M12X1.75X50-MM)
28.	8T-4223 C	[22]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	8T-4244 M	[12]	NUT (M12X1.75-THD)
30.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
31.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

237-3192: LINES GP-AUXILIARY HYDRAULIC

LINES GP-AUXILIARY HYDRAULIC

237-3192 LINES GP-AUXILIARY HYDRAULIC -REACH BOOM, HIGH PRESSURE
S/N GBC1-UP; NBD1-UP; EDX1-UP; MEY1-UP
Type 3
AN ATTACHMENT

Parts for your 330D L EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	187-9833	[1]	PLATE
2.	193-6662	[1]	PLATE
3.	202-7021	[2]	CLIP
4.	245-2184	[1]	TUBE AS
5.	245-2187	[1]	TUBE AS
6.	245-2190	[1]	TUBE AS
7.	245-2193	[1]	TUBE AS
8.	245-2196	[1]	TUBE AS
9.	245-2199	[1]	TUBE AS
10.	253-6458	[1]	CLIP AS
11.	268-7112	[8]	CLIP
12.	294-3794 C	[2]	CLIP AS
13.	294-3795 C	[2]	CLIP AS
14.	294-3798 C	[1]	PLATE
15.	294-3799 C	[1]	PLATE
16.	288-7641	[1]	CLIP AS
17.	093-1291	[2]	CLAMP
18.	6V-8398	[4]	SEAL-O-RING
19.	7J-9108	[4]	SEAL-O-RING
20.	447-1708 M	[2]	BOLT (M16X2X80-MM)
21.	7Y-3732	[2]	CLIP
22.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4133 M	[2]	NUT (M10X1.5-THD)
24.	8T-4139 M	[12]	BOLT (M12X1.75X30-MM)
25.	8T-4184 M	[4]	BOLT (M12X1.75X45-MM)
26.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
27.	8T-4194 M	[4]	BOLT (M12X1.75X50-MM)
28.	8T-4223	[22]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	8T-4244 M	[12]	NUT (M12X1.75-THD)
30.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
31.	451-2175	[2]	WASHER-HARD (17.5X30X3.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

Information:

HYDRAULIC SYSTEM

PUMP GP

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Wear on Swash Plate Support in Side By Side Pumps on Certain Excavators{5070}
Wear on Swash Plate Support in Side By Side Pumps on Certain Excavators{5070}

Specifications

Fan Drive Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Pump Control Valve (Hydraulic Fan) - Pressure Compensator
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Auxiliary Pump Drive and Mounting
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Pump Control Valve
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Gear Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Main Hydraulic Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Fan Drive Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Main Hydraulic Pump
330D, 336D, 336D2, 340D and 340D2 Excavators Machine System Specifications

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Service Letter-China

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS

Service Letter-Asia

Systems Operation

Pump Control (Main Hydraulic) - Main Pump Regulator
330D, 336D and 340D Excavators Hydraulic System

Gear Pump (Pilot)
330D, 336D and 340D Excavators Hydraulic System

Solenoid Valve (Proportional Reducing) - Power Shift System
330D, 336D and 340D Excavators Hydraulic System

Main Hydraulic Pump
330D, 336D and 340D Excavators Hydraulic System

Negative Flow Control System
330D, 336D and 340D Excavators Hydraulic System

Reuse And Salvage Guidelines

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Information Release Memo

CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS
CAT REMAN EXPANDS HYD GEAR & PISTON PUMP & MOTOR OPTIONS

Service Letter-APD

PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 242-6916 GASKET OF THE MAIN HYDRAULIC PUMP ON CERTAIN 330D, 330D L, 330D LN OEM, 330D MH, 330D MH FCR, 330D MH HCR, 330D OEM, 345C, 345C L, 345C MH FCR, 345C MH HCR, AND 345C OEM EXCAVATORS

Testing and Adjusting

Main Hydraulic Pump Air - Purge
330D, 336D and 340D Excavators Hydraulic System

Swing Speed and Overswing on Level Ground - Check
330D, 336D and 340D Excavators Hydraulic System

Swing Speed and Swing Drift on a Slope - Check
330D, 336D and 340D Excavators Hydraulic System

Main Pump (Flow) - Test - Constant Horsepower Flow Control for Stage 1 Pump
330D, 336D and 340D Excavators Hydraulic System

Pump Control (Negative Flow) - Test - Stage 1 Pump
330D, 336D and 340D Excavators Hydraulic System

Pump Control (Negative Flow) - Adjust - Stage 1 Pump
330D, 336D and 340D Excavators Hydraulic System

Gear Pump (Pilot) - Test
330D, 336D and 340D Excavators Hydraulic System

Pump Control (Output Flow) - Adjust - Stage 1 Pump
330D, 336D and 340D Excavators Hydraulic System

Main Pump (Flow) - Test - Constant Horsepower Flow Control for Stage 2 Pump
330D, 336D and 340D Excavators Hydraulic System

Pump Control (Output Flow) - Adjust - Stage 2 Pump
330D, 336D and 340D Excavators Hydraulic System

Pump Control (Negative Flow) - Test - Stage 2 pump
330D, 336D and 340D Excavators Hydraulic System

Bench Test Procedures

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}

Disassembly and Assembly

Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement

Fan Group (Includes Fan, Fan Guard, Fan Shroud, and Hydraulic Fan Motor) - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement

Gear Pump (Auxiliary) - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Gear Pump (Auxiliary) - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Gear Pump (Pilot) - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Gear Pump (Pilot) - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Piston Pump (Hydraulic Fan) - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Piston Pump (Hydraulic Fan) - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Main Hydraulic Pump - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Main Hydraulic Pump - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Gear Pump (Auxiliary) - Disassemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Gear Pump (Auxiliary) - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Engine and Main Hydraulic Pump - Remove
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement

Engine and Main Hydraulic Pump - Install
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit C9 Engine Supplement

Main Hydraulic Pump - Disassemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Main Hydraulic Pump - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Piston Pump (Hydraulic Fan) - Disassemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Piston Pump (Hydraulic Fan) - Assemble
330D, 336D, 336D2, 340D and 340D2 Excavators and 336D MHPU Mobile Hydraulic Power Unit Machine Systems

Service Magazine

Correction to Testing and Adjusting , "Main Pump (Flow) - Test" {5070}
2007/08/06

New Seals in the Main Hydraulic Pump Prevent Oil Leaks from the Pump Shaft {5070, 7555}
2010/07/30

Improve Sealing for the Head Group on the Main Hydraulic Pump for Certain 330D and 345C Excavators {5070}
2009/11/05

A New Gear Pump Group (MEDIUM PRESSURE) is Now Used on Certain Excavators {5073}
2010/06/24

Key Differences Between Similar Double Piston Pump Offerings for Certain Excavators, Forest Machines, and Mobile Hydraulic Power Units {5070}
Key Differences Between Similar Double Piston Pump Offerings for Certain Excavators, Forest Machines, and Mobile Hydraulic Power Units {5070}

Caterpillar Parts SIS Catalog 330D L :

Truck sale:

130,000

Caterpillar 330DL, Construction
- Crawler Excavators
WYOMING MACHINERY

Caterpillar 330DL, Construction
- Crawler Excavators
BERGERAT MONNOYEUR S.A.S.
France

56,700

Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines

Caterpillar 330DL, Construction
- Crawler Excavators
MANTRAC GHANA LIMITED
Ghana

73,710

Caterpillar 330DL, Construction
- Crawler Excavators
MONARK EQUIPMENT
Philippines