AIR INLET AND EXHAUST SYSTEM
LINES GP-AIRMANIFOLD GP-EXHAUST
MANIFOLD GP-INLET
MUFFLER GP
EXHAUST GP
AIR INLET AND EXHAUST SYSTEM
LINES GP-AIR
#SEBP41880160
229-7230: LINES GP-AIR
229-7230 LINES GP-AIR -TURBOCHARGER
S/N B1L1-594
PART OF 226-8623 ENGINE & TRANSMISSION AR
S/N B1L1-594
PART OF 226-8623 ENGINE & TRANSMISSION AR
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS#SEBP41880161
229-7230: LINES GP-AIR
229-7230 LINES GP-AIR -TURBOCHARGER
S/N B1L595-UP
PART OF 226-8623 ENGINE & TRANSMISSION AR
S/N B1L595-UP
PART OF 226-8623 ENGINE & TRANSMISSION AR
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS#SEBP41880162
236-5751: LINES GP-AIR
236-5751 LINES GP-AIR -AFTERCOOLER
S/N B1L1-UP
PART OF 226-8623 ENGINE & TRANSMISSION AR
S/N B1L1-UP
PART OF 226-8623 ENGINE & TRANSMISSION AR
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7C-7534 | [3] | HOSE | |
| 2. | 8T-4985 | [20] | CLAMP-HOSE | |
| 3. | 9X-2201 | [8] | CLAMP-HOSE | |
| 4. | 145-5181 | [1] | SPACER (13.5X25X12-MM THK) | |
| 5. | 255-3336 | [1] | ANGLE AS | |
| 8T-3597 M | [1] | NUT-WELD (M12X1.75-THD) | ||
| 6. | 237-7321 | [4] | CONNECTOR-HOSE | |
| 7. | 238-1832 | [1] | TUBE | |
| 8. | 238-1833 | [1] | TUBE | |
| 9. | 238-1834 | [1] | TUBE | |
| 10. | 238-1835 | [1] | TUBE | |
| 11. | 238-2618 | [1] | TUBE | |
| 12. | 103-0892 | [4] | GROMMET | |
| 13. | 6V-6782 | [4] | CLIP (SLOT) | |
| 14. | 6V-6783 | [4] | CLIP (TAB) | |
| 15. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 17. | 8T-4183 M | [1] | BOLT (M12X1.75X40-MM) | |
| 18. | 8T-4184 M | [2] | BOLT (M12X1.75X45-MM) | |
| 19. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 20. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8T-4244 M | [2] | NUT (M12X1.75-THD) | |
| M | METRIC PART | |||
#SEBP41880163
224-5383: MANIFOLD GP-EXHAUST
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-4369 | [12] | SPACER (12X19X23.5-MM THK) | |
| 2. | 283-2238 | [6] | GASKET | |
| 3. | 231-9030 | [2] | MANIFOLD-EXHAUST (END) | |
| 4. | 229-3567 | [1] | MANIFOLD-EXHAUST (CENTER) | |
| 5. | 116-3715 M | [12] | STUD-TAPERLOCK (M10X1.5X85-MM) | |
| 6. | 9X-6620 M | [12] | LOCKNUT (M10X1.5-THD) | |
| 7. | 6V-5839 | [12] | WASHER (11X21X2.5-MM THK) | |
| 8. | 245-9750 M | [4] | STUD-TAPERLOCK (M10X1.5X50-MM) | |
| M | METRIC PART | |||
#SEBP41880164
247-2833: MANIFOLD GP-EXHAUST
247-2833 MANIFOLD GP-EXHAUST
S/N TXE1-UP; RSX2240-UP
PROVIDES A LOW STRESS FOOT CENTER SECTION
PART OF 228-4410, 292-9282, 349-4471 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TXE1-UP; RSX2240-UP
PROVIDES A LOW STRESS FOOT CENTER SECTION
PART OF 228-4410, 292-9282, 349-4471 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4P-4369 | [12] | SPACER (12X19X23.5-MM THK) | |
| 2. | 283-2238 | [6] | GASKET | |
| 3. | 247-2834 | [1] | MANIFOLD-EXHAUST (CENTER) | |
| 4. | 231-9030 | [2] | MANIFOLD-EXHAUST (END) | |
| 5. | 116-3715 M | [12] | STUD-TAPERLOCK (M10X1.5X85-MM) | |
| 6. | 9X-6620 M | [12] | LOCKNUT (M10X1.5-THD) | |
| 7. | 6V-5839 | [12] | WASHER (11X21X2.5-MM THK) | |
| 8. | 9X-8281 M | [4] | STUD-TAPERLOCK (M10X1.5X45-MM) | |
| M | METRIC PART | |||
#SEBP41880165
222-3092: MANIFOLD GP-INLET
222-3092 MANIFOLD GP-INLET
S/N TXE1-UP; RSX1-UP
PART OF 228-4410, 292-9282, 349-4471 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
S/N TXE1-UP; RSX1-UP
PART OF 228-4410, 292-9282, 349-4471 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 121-5908 M | [1] | STUD (M10X1.5X105-MM) | |
| 2. | 375-8478 | [1] | MANIFOLD-INLET | |
| 3. | 230-3518 | [1] | GASKET-MANIFOLD | |
| 4. | 132-5789 | [1] | CLIP (LADDER) | |
| 5. | 183-3407 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 5A. | 214-7568 | [1] | SEAL-O-RING | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 6. | 176-9237 M | [1] | BOLT-SPECIAL (M10X1.5-THD) | |
| 7. | 6V-3822 M | [10] | BOLT (M10X1.5X35-MM) | |
| 8. | 6V-6353 | [1] | SEAL-O-RING | |
| 9. | 6V-5839 | [12] | WASHER (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
#SEBP41880166
229-8090: MUFFLER GP
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-5272 B | [3] | WASHER (12.7X31.7X2-MM THK) | |
| 2. | 6U-5219 | [1] | U-CLAMP AS | |
| 3. | 8T-6431 | [2] | ROD END | |
| 4. | 9N-1941 | [1] | CLAMP-V BAND | |
| 5. | 142-0485 M | [2] | NUT (M10X1.5-THD) | |
| 6. | [1] | MUFFLER AS | ||
| 7. | 173-2328 | [1] | PIPE AS | |
| 8. | 173-2331 | [1] | PIPE AS | |
| 9. | 175-3377 | [1] | SUPPORT AS | |
| 10. | 175-3380 | [2] | PLATE | |
| 11. | 175-4780 | [1] | PLATE AS | |
| 12. | 175-7262 | [1] | PLATE | |
| 13. | 175-9076 | [2] | MOUNTING | |
| 14. | 175-9077 | [1] | PLATE | |
| 15. | 175-9078 | [1] | PLATE | |
| 16. | 175-9079 M | [1] | ROD-LINK | |
| 17. | 176-8102 | [1] | CLAMP | |
| 18. | 176-8232 | [1] | TUBE AS | |
| 19. | 176-8234 | [2] | CLAMP | |
| 20. | 176-8237 | [1] | CLAMP | |
| 21. | 197-4834 | [1] | SEAL | |
| 22. | 197-4835 | [1] | PLATE-RETAINER | |
| 23. | 202-1838 | [1] | CLAMP-V BAND | |
| 24. | 202-1839 | [2] | CLAMP-V BAND | |
| 25. | 205-3625 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 26. | 211-2326 | [3] | BOSS | |
| 27. | 211-4635 | [1] | PIPE-EXHAUST | |
| 28. | 216-9945 | [1] | PIPE GP-EXHAUST (TAIL) | |
| 29. | 226-2659 B | [2] | WASHER-BELLEVILLE | |
| 30. | 232-4836 | [1] | SUPPORT AS | |
| 31. | 234-1703 | [1] | TUBE AS | |
| 32. | 5C-7261 M | [10] | NUT (M8X1.25-THD) | |
| 33. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 34. | 6V-7687 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 35. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 36. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 37. | 7X-2537 M | [2] | BOLT (M8X1.25X35-MM) | |
| 38. | 7X-2550 M | [1] | BOLT (M12X1.75X110-MM) | |
| 39. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 40. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4184 M | [6] | BOLT (M12X1.75X45-MM) | |
| 42. | 8T-4189 M | [8] | BOLT (M8X1.25X20-MM) | |
| 43. | 8T-4192 M | [6] | BOLT (M12X1.75X25-MM) | |
| 44. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 45. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 46. | 8T-4224 B | [20] | WASHER-HARD (8.8X16X2-MM THK) | |
| 47. | 8T-6685 M | [1] | BOLT (M10X1.5X110-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP41880167
229-8090: MUFFLER GP
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-5272 B | [3] | WASHER (12.7X31.7X2-MM THK) | |
| 2. | 6U-5219 | [1] | U-CLAMP AS | |
| 3. | 8C-5608 C | [3] | SPACER (6.5X9.5X25.4-MM THK) | |
| 4. | 8T-6431 | [2] | ROD END | |
| 5. | 9N-1941 | [1] | CLAMP-V BAND | |
| 6. | 9X-9896 C | [6] | MOUNT (ISOLATION) | |
| 7. | 142-0485 M | [2] | NUT (M10X1.5-THD) | |
| 8. | [1] | MUFFLER AS | ||
| 9. | 173-2328 | [1] | PIPE AS | |
| 10. | 173-2331 | [1] | PIPE AS | |
| 11. | 175-3377 | [1] | SUPPORT AS | |
| 12. | 175-3380 | [2] | PLATE | |
| 13. | 175-7262 | [1] | PLATE | |
| 14. | 175-9079 M | [1] | ROD-LINK | |
| 15. | 176-8102 | [1] | CLAMP | |
| 16. | 176-8232 | [1] | TUBE AS | |
| 17. | 176-8234 | [2] | CLAMP | |
| 18. | 176-8237 | [1] | CLAMP | |
| 19. | 197-4834 | [1] | SEAL | |
| 20. | 197-4835 | [1] | PLATE-RETAINER | |
| 21. | 202-1838 | [1] | CLAMP-V BAND | |
| 22. | 202-1839 | [2] | CLAMP-V BAND | |
| 23. | 205-3625 | [1] | PLATE AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 24. | 211-2326 | [3] | BOSS | |
| 25. | 211-4635 | [1] | PIPE-EXHAUST | |
| 26. | 226-2659 B | [2] | WASHER-BELLEVILLE | |
| 27. | 232-4836 | [1] | SUPPORT AS | |
| 28. | 234-1703 | [1] | TUBE AS | |
| 29. | 249-2844 C | [3] | WASHER (12.7X31.7X1-MM THK) | |
| 30. | 264-3334 C | [1] | PLATE AS | |
| 175-4782 | [1] | BOSS | ||
| 31. | 264-3336 C | [1] | PIPE GP-EXHAUST (TAIL) | |
| 32. | 264-6226 C | [1] | PLATE-MOUNTING | |
| 33. | 264-7477 C | [1] | PLATE-MOUNTING | |
| 34. | 264-8816 C | [4] | SPACER (10.5X16X8.5-MM THK) | |
| 35. | 287-0310 C | [1] | SPACER (11X20X70-MM THK) | |
| 36. | 5C-2890 CM | [3] | NUT (M6X1-THD) | |
| 37. | 5C-7261 CM | [4] | NUT (M8X1.25-THD) | |
| 38. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 39. | 6V-7687 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 40. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 41. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 42. | 7X-2550 M | [1] | BOLT (M12X1.75X110-MM) | |
| 43. | 7X-7729 C | [8] | WASHER (11X25X3-MM THK) | |
| 44. | 8C-8451 CM | [3] | BOLT (M6X1X40-MM) | |
| 45. | 8T-4121 C | [3] | WASHER-HARD (11X21X2.5-MM THK) | |
| 46. | 8T-4133 CM | [2] | NUT (M10X1.5-THD) | |
| 47. | 8T-4184 M | [6] | BOLT (M12X1.75X45-MM) | |
| 48. | 8T-4185 CM | [2] | BOLT (M10X1.5X50-MM) | |
| 49. | 8T-4189 CM | [6] | BOLT (M8X1.25X20-MM) | |
| 50. | 8T-4192 M | [6] | BOLT (M12X1.75X25-MM) | |
| 51. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 52. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 53. | 8T-4224 C | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 54. | 8T-6685 M | [1] | BOLT (M10X1.5X110-MM) | |
| 55. | 8T-7547 CM | [2] | BOLT (M8X1.25X30-MM) | |
| 56. | 9X-6165 C | [6] | WASHER (6.5X22X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP41880168
279-4913: MUFFLER GP
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-5272 B | [3] | WASHER (12.7X31.7X2-MM THK) | |
| 2. | 6U-2703 | [1] | BRACKET-ANGLE | |
| 3. | 6U-5219 | [2] | U-CLAMP AS | |
| 4. | 8C-5608 C | [3] | SPACER (6.5X9.5X25.4-MM THK) | |
| 5. | 8T-6431 | [2] | ROD END | |
| 6. | 9N-1941 | [1] | CLAMP-V BAND | |
| 7. | 9X-9896 C | [6] | MOUNT (ISOLATION) | |
| 8. | 142-0485 M | [2] | NUT (M10X1.5-THD) | |
| 9. | 173-2328 | [1] | PIPE AS | |
| 10. | 175-9079 M | [1] | ROD-LINK | |
| 11. | 176-8234 | [2] | CLAMP | |
| 12. | 190-5341 | [1] | CLAMP | |
| 13. | 197-4834 | [1] | SEAL | |
| 14. | 197-4835 | [1] | PLATE-RETAINER | |
| 15. | 202-1838 | [3] | CLAMP-V BAND | |
| 16. | 205-3625 | [1] | PLATE AS | |
| 17. | 211-2326 | [3] | BOSS | |
| 18. | 211-4635 | [1] | PIPE-EXHAUST | |
| 19. | 226-2659 B | [2] | WASHER-BELLEVILLE | |
| 20. | 232-4836 | [1] | SUPPORT AS | |
| 21. | 249-2844 | [3] | WASHER (12.7X31.7X1-MM THK) | |
| 22. | 264-3334 C | [1] | PLATE AS | |
| 175-4782 | [1] | BOSS | ||
| 23. | 264-3336 C | [1] | PIPE GP-EXHAUST | |
| 24. | 264-6226 C | [1] | PLATE-MOUNTING | |
| 25. | 264-7477 C | [1] | PLATE-MOUNTING | |
| 26. | 264-8816 C | [4] | SPACER (10.5X16X8.5-MM THK) | |
| 27. | 276-5176 | [2] | STRAP-MUFFLER | |
| 28. | 279-4914 | [1] | SILENCER-EXHAUST | |
| 29. | 279-4915 | [1] | TUBE AS | |
| 30. | 279-4917 | [1] | TUBE AS | |
| 31. | 279-4918 | [1] | BRACKET AS | |
| 279-5654 | [1] | PLATE-SUPPORT | ||
| 32. | 279-5660 | [1] | TUBE AS | |
| 33. | 279-8075 | [1] | PLATE | |
| 34. | 287-0310 C | [1] | SPACER (11X20X70-MM THK) | |
| 35. | 5C-2890 CM | [3] | NUT (M6X1-THD) | |
| 36. | 5C-7261 CM | [4] | NUT (M8X1.25-THD) | |
| 37. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 38. | 5P-7470 | [1] | CLIP (SLOT) | |
| 39. | 5P-7471 | [1] | CLIP (TAB) | |
| 40. | 5P-8182 | [1] | GROMMET (46-MM ID) | |
| 41. | 6V-7687 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 42. | 6V-7744 M | [1] | LOCKNUT (M10X1.5-THD) | |
| 43. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 44. | 7X-2550 M | [1] | BOLT (M12X1.75X110-MM) | |
| 45. | 7X-7729 C | [7] | WASHER (11X25X3-MM THK) | |
| 46. | 8C-8451 CM | [3] | BOLT (M6X1X40-MM) | |
| 47. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 48. | 8T-4133 CM | [3] | NUT (M10X1.5-THD) | |
| 49. | 8T-4172 M | [1] | BOLT (M10X1.5X80-MM) | |
| 50. | 8T-4184 M | [6] | BOLT (M12X1.75X45-MM) | |
| 51. | 8T-4185 CM | [2] | BOLT (M10X1.5X50-MM) | |
| 52. | 8T-4189 CM | [6] | BOLT (M8X1.25X20-MM) | |
| 53. | 8T-4192 M | [6] | BOLT (M12X1.75X25-MM) | |
| 54. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
| 55. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 56. | 8T-4224 C | [8] | WASHER-HARD (8.8X16X2-MM THK) | |
| 57. | 8T-6685 M | [1] | BOLT (M10X1.5X110-MM) | |
| 58. | 8T-7547 CM | [2] | BOLT (M8X1.25X30-MM) | |
| 59. | 9X-6165 C | [6] | WASHER (6.5X22X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP41880169
149-0048: PIPE GP-EXHAUST
149-0048 PIPE GP-EXHAUST -FRONT
S/N B1L1-UP
PART OF 190-7353, 254-0511 PIPE GP-EXHAUST
AN ATTACHMENT
S/N B1L1-UP
PART OF 190-7353, 254-0511 PIPE GP-EXHAUST
AN ATTACHMENT
For full view, you need register
Parts for your 725 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1W-2431 | [1] | CLAMP-BAND | |
| 2. | 9X-2201 | [2] | CLAMP-HOSE | |
| 3. | 179-3361 | [1] | PIPE AS | |
| 4. | 180-0352 | [1] | PIPE AS | |
| 5. | 310-6814 | [1] | SUPPORT AS (SHIELD) | |
| 6. | 186-1425 | [1] | DUCT AS | |
| 7. | 186-5065 | [2] | CLAMP (STEPPED) | |
| 8. | 190-5938 | [1] | TUBE-FLEXIBLE | |
| 9. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 11. | 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
