AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

369-3545 CONTROL GP-TRANSMISSION HYD S/N KYP1-UP PART OF 369-3543 TRANSMISSION AR 730 ARTICULATED TRUCK


POWER TRAIN
CONTROL GP-TRANSMISSION HYD
COOLER GP
DIFFERENTIAL & BEVEL GEAR GP

ARTICULATED TRUCK 730 ARTICULATED TRUCK B1M
 730 Articulated Truck B1M00001-UP (MACHINE) POWERED BY C11 Engine SEBP4189 730 B1M   (2004)

POWER TRAIN

CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
234-2974 CONTROL GP-TRANSMISSION HYD
CONTROL GP-TRANSMISSION HYD
369-3545 CONTROL GP-TRANSMISSION HYD
 

#SEBP41890460
 

369-3545: CONTROL GP-TRANSMISSION HYD

369-3545 CONTROL GP-TRANSMISSION HYD
S/N KYP1-UP
PART OF 369-3543 TRANSMISSION AR
i05070652 SEBP4189
3693545 CONTROL GP-TRANSMISSION HYD Parts scheme 3693545 CONTROL GP-TRANSMISSION HYD Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1V-6341 [2] SEAL  
2. 2H-6184 [1] SEAL-O-RING  
3. 2P-1692 [1] SEAL-O-RING  
4. 3S-2093 [22] STRAP-CABLE  
5. 6D-7889 [6] SEAL-O-RING  
6. 6V-0852 [10] CAP-DUST  
7. 8T-7000 [2] SEAL  
8. 9M-9545 [1] SEAL-O-RING  
9. 124-9401 [1] CLIP (TAB)  
10. 134-2252 Y [1] SENSOR GP-TEMPERATURE (8-VOLT)(AXLE OIL)  
11. 149-0978 Y [1] VALVE GP-RETARDER HYD CONTROL  
12. 171-1526 [1] GUARD  
13. 172-7970 Y [1] VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL)  
14. 180-3178 [1] VALVE GP-RELIEF (TORQUE CONVERTER INLET)  
15. 183-9358 [1] PLATE  
16. 189-5746 Y [1] SENSOR GP-SPEED (ENGINE)  
17. 191-8305 [2] SENSOR GP-SPEED (4-WHEEL DRIVE)  
    (EACH INCLUDES)
  137-6645 [1] PAD-CONNECTOR  
18. 193-0421 Y [1] SENSOR GP-SPEED (TORQUE CONVERTER OUTPUT)  
19. 209-6632 Y [1] VALVE GP-BYPASS (TRANSMISSION OIL FILTER)  
20. 214-7568 [1] SEAL-O-RING  
21. 230-3166 [1] VALVE GP-RELIEF (TORQUE CONVERTER OUTLET)  
22. 244-3114 Y [6] VALVE GP-MODULATING (24-VOLT)(TRANSMISSION HYDRAULIC CONTROL)  
23. 245-1158 Y [1] HARNESS AS-TRANSMISSION  
24. 245-1159 [1] BRACKET  
25. 246-2584 [1] BRACKET AS  
26. 315-9835 [3] ELBOW AS  
    (EACH INCLUDES)
  6V-0484 [1] ELBOW  
  214-7568 [1] SEAL-O-RING  
27. 117-1385 [2] SEAL-O-RING  
28. 130-5300 [2] CLIP  
29. 132-5789 [9] CLIP (LADDER)  
30. 4B-1226 [1] SCREW-MACHINE (10-24X6.35-MM)  
31. 4P-7428 [1] CLIP (LADDER)  
32. 4P-7429 [2] CLIP (LADDER)  
33. 4P-7581 [6] CLIP (LADDER)  
34. 5P-8245 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 5P-8347 M [10] BOLT (M8X1.25X70-MM)  
36. 5P-9085 [3] CLIP (LOOP)  
37. 6A-5591 M [1] BOLT (M12X1.75X25-MM)  
38. 6V-3940 M [1] BOLT (M8X1.25X25-MM)  
39. 6V-5215 M [5] BOLT (M8X1.25X16-MM)  
40. 6V-5839 [7] WASHER (11X21X2.5-MM THK)  
41. 6V-8455 M [7] BOLT (M10X1.5X16-MM)  
42. 8M-1112 [1] SEAL-O-RING  
43. 8T-0100 M [12] BOLT (M8X1.25X60-MM)  
44. 8T-0106 M [4] BOLT (M12X1.75X100-MM)  
45. 9M-1974 [28] WASHER-HARD (8.8X16X2-MM THK)  
46. 9X-4609 [1] SEAL-O-RING  
47. 9X-8268 [2] WASHER (17.5X30X3.5-MM THK)  
48. 369-3540 [1] PLATE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41890461
 

275-7641: COOLER GP-OIL

275-7641 COOLER GP-OIL
S/N B1M392-UP
PART OF 226-8620 INSTALLATION AR-MACHINE, 282-8716 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT
i02506750 SEBP4189
2757641 COOLER GP-OIL Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 285-3821 [1] CORE AS-OIL COOLER (POWER TRAIN)  
1A. 6V-8637 [2] CONNECTOR  
2. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
3. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 8T-4244 M [2] NUT (M12X1.75-THD)  
  M   METRIC PART
 

#SEBP41890462
 

237-8054: COOLER GP-POWER TRAIN OIL

237-8054 COOLER GP-POWER TRAIN OIL
S/N B1M1-391
PART OF 229-1414 LINES GP-COOLANT
i02072651 SEBP4189
2378054 COOLER GP-POWER TRAIN OIL Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-0113 [1] CORE AS-OIL COOLER (POWER TRAIN)  
  5M-6214 [2] PLUG (1/8-27 PTF)  
2. 194-3946 [2] FLANGE  
3. 197-0492 [1] BONNET AS  
4. 197-4508 [1] BONNET AS  
5. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
6. 153-6237 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9004 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
7. 2M-5414 [2] GASKET  
8. 4L-9337 [4] BOLT (3/8-16X1.5-IN)  
9. 8M-4986 [2] SEAL-O-RING  
10. 8T-4896 [12] WASHER-HARD (10.2X18.5X2.5-MM THK)  
11. 9B-7237 [8] BOLT (3/8-16X1.25-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41890463
 

227-8354: COOLER GP-TRANSMISSION OIL

227-8354 COOLER GP-TRANSMISSION OIL
S/N TXE1-UP; KYP1-UP; RSX1-16801
PART OF 227-8353 ENGINE AR, 292-9283, 349-4472 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i02068596 SEBP4189
2278354 COOLER GP-TRANSMISSION OIL Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-0795 [2] GASKET  
2. 8M-9307 [1] PLUG (TRANSMISSION OIL COOLER)  
3. 8S-4304 [1] BONNET-XMSN OIL COOLER  
4. 9Y-6089 [1] GASKET  
5. 122-9934 [1] CORE AS-OIL COOLER (TRANSMISSION)  
6. 124-5043 [1] COUPLING  
7. 231-3178 [1] BRACKET  
8. 242-4198 [1] BRACKET  
9. 242-4199 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
10. 360-1906 [1] ELBOW  
11. 0S-1592 [3] BOLT (5/8-11X1.25-IN)  
12. 0S-1620 [8] BOLT (1/2-13X0.75-IN)  
13. 1A-1460 [4] BOLT (1/2-13X2-IN)  
14. 1J-3619 [2] COVER  
15. 2N-5243 [2] SEAL-O-RING  
16. 353-5124 [1] PLUG AS  
  6V-3250 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
17. 353-5144 [1] PLUG AS  
  6V-5064 [1] SEAL-O-RING  
  9S-9334 [1] PLUG  
18. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
19. 3J-6933 [2] GASKET  
20. 5P-8245 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
22. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
23. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
24. 6V-3668 M [2] BOLT (M12X1.75X30-MM)  
25. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
26. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
27. 6V-5839 [2] WASHER (11X21X2.5-MM THK)  
28. 6V-5842 M [2] BOLT (M10X1.5X40-MM)  
29. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
30. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
31. 9X-8873 [2] BOLT (1/2-13X2.25-IN)  
32. 9X-8876 [2] BOLT (1/2-13X4.75-IN)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41890464
 

354-7467: COOLER GP-TRANSMISSION OIL

354-7467 COOLER GP-TRANSMISSION OIL
S/N TXE1-UP; RSX16802-UP
PART OF 292-9283 ENGINE AR-COMPLETE
i04034496 SEBP4189
3547467 COOLER GP-TRANSMISSION OIL Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-0795 [2] GASKET  
2. 8E-9571 [2] WASHER-HARD (8.8X16X7-MM THK)  
3. 8M-9307 [1] PLUG  
4. 8S-4304 [1] BONNET-XMSN OIL COOLER  
5. 9Y-6089 [1] GASKET  
6. 122-9934 [1] CORE AS-OIL COOLER (TRANSMISSION)  
7. 124-5043 [1] COUPLING  
8. 231-3178 [1] BRACKET  
9. 349-3309 [1] ELBOW  
10. 353-5124 [1] PLUG AS  
  6V-3250 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
11. 353-5144 [1] PLUG AS  
  6V-5064 [1] SEAL-O-RING  
  9S-9334 [1] PLUG  
12. 354-5010 BRACKET AS  
13. 355-4656 [2] STUD  
14. 0S-1592 [3] BOLT (5/8-11X1.25-IN)  
15. 0S-1620 [8] BOLT (1/2-13X0.75-IN)  
16. 1A-1460 [4] BOLT (1/2-13X2-IN)  
17. 1J-3619 [2] COVER  
18. 2N-5243 [2] SEAL-O-RING  
19. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
20. 3H-7654 [4] WASHER-HARD (13.5X22.5X3-MM THK)  
21. 3J-6933 [2] GASKET  
22. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
24. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
25. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
26. 6V-3668 M [2] BOLT (M12X1.75X30-MM)  
27. 6V-5219 M [5] BOLT (M8X1.25X40-MM)  
28. 6V-8188 [2] NUT (1/2-13-THD)  
29. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
30. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
31. 7X-0584 [2] WASHER-HARD (13.5X20.5X2-MM THK)  
32. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41890465
 

354-7467: COOLER GP-TRANSMISSION OIL

354-7467 COOLER GP-TRANSMISSION OIL
S/N TXE1-UP; RSX16802-UP
PART OF 292-9283, 349-4472 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i04314515 SEBP4189
3547467 COOLER GP-TRANSMISSION OIL Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-0795 [2] GASKET  
2. 8E-9571 [2] WASHER-HARD (8.8X16X7-MM THK)  
3. 8M-9307 [1] PLUG  
4. 8S-4304 [1] BONNET-XMSN OIL COOLER  
5. 9Y-6089 [1] GASKET  
6. 122-9934 [1] CORE AS-OIL COOLER (TRANSMISSION)  
7. 124-5043 [1] COUPLING  
8. 231-3178 [1] BRACKET  
9. 349-3309 [1] ELBOW  
10. 353-5124 [1] PLUG AS  
  6V-3250 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
11. 353-5144 [1] PLUG AS  
  6V-5064 [1] SEAL-O-RING  
  9S-9334 [1] PLUG  
12. 0S-1592 [3] BOLT (5/8-11X1.25-IN)  
13. 0S-1620 [8] BOLT (1/2-13X0.75-IN)  
14. 1A-1460 [4] BOLT (1/2-13X2-IN)  
15. 1J-3619 [2] COVER  
16. 2N-5243 [2] SEAL-O-RING  
17. 3E-4353 [2] WASHER-HARD (11X25X3-MM THK)  
18. 3H-7654 [4] WASHER-HARD (13.5X22.5X3-MM THK)  
19. 3J-6933 [2] GASKET  
20. 5P-8245 C [4] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
22. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
23. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
24. 6V-3668 M [2] BOLT (M12X1.75X30-MM)  
25. 6V-5219 M [5] BOLT (M8X1.25X40-MM)  
26. 9X-8873 C [2] BOLT (1/2-13X2.25-IN)  
27. 7B-3235 [4] BOLT (1/2-13X1.375-IN)  
28. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
29. 7X-0584 [2] WASHER-HARD (13.5X20.5X2-MM THK)  
30. 8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
31. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
32. 242-4199 C [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
33. 242-4198 C [1] BRACKET  
34. 8T-4186 CM [2] BOLT (M10X1.5X40-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41890466
 

354-7467: COOLER GP-TRANSMISSION OIL

354-7467 COOLER GP-TRANSMISSION OIL
S/N TXE1-UP; RSX1-UP
PART OF 292-9283, 349-4472 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i05343747 SEBP4189
3547467 COOLER GP-TRANSMISSION OIL Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2S-0795 [2] GASKET  
3. 8M-9307 [1] PLUG  
4. 8S-4304 [1] BONNET-XMSN OIL COOLER  
5. 9Y-6089 [1] GASKET  
6. 122-9934 [1] CORE AS-OIL COOLER (TRANSMISSION)  
7. 124-5043 [1] COUPLING  
8. 451-7256 [1] BRACKET  
9. 442-4952 C [1] ELBOW  
10. 353-5124 [1] PLUG AS  
  6V-3250 [1] SEAL-O-RING  
  9S-8004 [1] PLUG (9/16-18-THD)  
11. 353-5144 [1] PLUG AS  
  6V-5064 [1] SEAL-O-RING  
  9S-9334 [1] PLUG  
12. 354-5010 [1] BRACKET AS  
13. 355-4656 [2] STUD  
14. 099-3649 CM [3] BOLT (M8X1.25X40-MM)  
15. 1J-3619 [2] COVER  
16. 2N-5243 [2] SEAL-O-RING  
17. 3J-6933 [2] GASKET  
18. 6F-7062 [1] WASHER (12.7X19.05X1.83-MM THK)  
19. 6V-8188 [2] NUT (1/2-13-THD)  
20. 7X-0333 [2] BOLT (1/2-13X4.75-IN)  
21. 7X-0343 C [3] BOLT (5/8-11X1.25-IN)  
22. 7X-0584 C [6] WASHER-HARD (13.5X20.5X2-MM THK)  
23. 7X-7729 C [2] WASHER (11X25X3-MM THK)  
24. 8C-4436 C [4] BOLT (1/2-13X1.375-IN)  
25. 8T-4122 C [3] WASHER-HARD (17X32X3.5-MM THK)  
26. 6V-8675 CM [2] BOLT (M12X1.75X35-MM)  
27. 8T-4195 CM [2] BOLT (M10X1.5X30-MM)  
28. 8T-4223 C [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 8T-4224 C [3] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-4835 C [4] BOLT (1/2-13X2-IN)  
31. 8T-9383 C [8] BOLT (1/2-13X0.75-IN)  
32. 117-3036 [1] SEAL-O-RING  
33. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP41890467
 

147-6790: DIFFERENTIAL & BEVEL GEAR GP

147-6790 DIFFERENTIAL & BEVEL GEAR GP -FRONT, REAR
S/N B1M1-UP
PART OF 147-6600, 250-9572 AXLE GP-REAR
AN ATTACHMENT
i01268732 SEBP4189
1476790 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4693 [2] CUP-BEARING  
2. 1P-4694 [2] CONE-BEARING  
3. 3S-1374 [3] SPRING  
4. 5L-2031 [1] CUP-BEARING  
5. 5P-9505 [1] CONE-BEARING  
6. 6V-3950 [1] CONE-BEARING  
7. 127-1960 M [8] SCREW-FLAT HEAD (M6X1X16-MM)  
8. 136-6324 [6] DISC-FRICTION  
9. 138-1486 [2] CAGE-BEARING  
10. 138-1487 [2] RING-ADJUSTMENT  
11. 138-1488 [2] LOCK  
12. 138-1490 [3] SPACER (10.2X18X15-MM THK)  
13. 138-1504 [1] PISTON HOUSING  
14. 138-1508 [1] HUB  
15. 138-3689 Y [1] CARRIER GP-DIFFERENTIAL (FRONT, REAR)  
16. 138-4096 B [5] SHIM (0.05-MM THK)  
17. 138-4097 B [5] SHIM (0.08-MM THK)  
18. 138-4098 B [3] SHIM (0.12-MM THK)  
19. 138-4099 B [1] SHIM (0.5-MM THK)  
20. 1J-2860 [1] CUP-BEARING  
21. 147-7247 [1] GEAR SET-BEVEL (47-TEETH)  
22. 147-7248 [1] CAGE  
23. 147-7249 [1] RETAINER-SEAL  
24. 151-8268 [1] HUB AS  
25. 151-8274 [6] PLATE-CLUTCH  
26. 151-8275 [2] PLATE-CLUTCH  
27. 151-8397 [2] PLATE  
28. 160-8060 [1] PISTON  
29. 163-1921 [1] TUBE  
30. 176-5445 [1] SPACER (65.35X95.5X8-MM THK)  
31. 193-4302 Y [1] DIFFERENTIAL GP  
32. 217-3252 [1] BEARING-NEEDLE  
33. 224-2323 [1] BEARING-THRUST  
34. 250-7858 [1] LOCKNUT  
35. 0S-1603 [28] BOLT (1/2-20X1.5-IN)  
36. 123-4003 [1] SEAL-LIP TYPE  
37. 4J-2506 [2] SEAL-O-RING  
38. 4K-6804 [1] SEAL-O-RING  
39. 5C-9553 M [4] BOLT (M6X1X16-MM)  
40. 5F-3106 [1] SEAL-O-RING  
41. 5P-8245 [32] WASHER-HARD (13.5X25.5X3-MM THK)  
42. 7X-0909 M [4] BOLT (M12X1.75X140-MM)  
43. 7X-7729 [3] WASHER (11X25X3-MM THK)  
44. 8C-3347 [2] PIN-ROLL  
45. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
46. 8T-4195 M [19] BOLT (M10X1.5X30-MM)  
47. 9F-1399 [2] SEAL-O-RING  
48. 1U-8846 B [1] SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41890468
 

147-7380: DIFFERENTIAL & BEVEL GEAR GP

147-7380 DIFFERENTIAL & BEVEL GEAR GP -AXLE, FRONT, REAR
S/N B1M1-UP
PART OF 147-7400 AXLE GP-FRONT, 147-7700 AXLE GP-REAR
ALSO AN ATTACHMENT
i01269984 SEBP4189
1477380 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4693 [1] CUP-BEARING  
2. 1P-4694 [1] CONE-BEARING  
3. 3S-1374 [3] SPRING  
4. 5L-2031 [1] CUP-BEARING  
5. 5P-9505 [1] CONE-BEARING  
6. 6V-3950 [1] CONE-BEARING  
7. 8S-9075 [1] CONE-BEARING  
8. 8S-9076 [1] CUP-BEARING  
9. 127-1960 M [8] SCREW-FLAT HEAD (M6X1X16-MM)  
10. 136-6324 [7] DISC-FRICTION  
11. 138-1486 [1] CAGE-BEARING  
12. 138-1487 [1] RING-ADJUSTMENT  
13. 138-1488 [1] LOCK  
14. 138-1490 [3] SPACER (10.2X18X15-MM THK)  
15. 138-1504 [1] PISTON HOUSING  
16. 138-3623 [1] CAGE  
17. 138-3624 [1] RING  
18. 138-3626 [1] LOCK  
19. 138-3638 [1] HUB  
20. 138-4096 B [5] SHIM (0.05-MM THK)  
21. 138-4097 B [5] SHIM (0.08-MM THK)  
22. 138-4098 B [3] SHIM (0.12-MM THK)  
23. 138-4099 B [1] SHIM (0.5-MM THK)  
24. 1J-2860 [1] CUP-BEARING  
25. 143-8691 Y [1] CARRIER GP-DIFFERENTIAL (AXLE, FRONT, REAR)  
26. 147-6792 [1] GEAR SET-BEVEL (40-TEETH)  
27. 147-7248 [1] CAGE  
28. 147-7249 [1] RETAINER-SEAL  
29. 151-8269 [1] HUB AS  
30. 151-8274 [7] PLATE-CLUTCH  
31. 151-8275 [2] PLATE-CLUTCH  
32. 151-8397 [2] PLATE  
33. 160-8060 [1] PISTON  
34. 163-1921 [1] TUBE  
35. 176-5445 [1] SPACER (65.35X95.5X8-MM THK)  
36. 193-4303 Y [1] DIFFERENTIAL GP (DRIVE AXLE)  
37. 217-3252 [1] BEARING-NEEDLE  
38. 224-2323 [1] BEARING-THRUST  
39. 250-7858 [1] LOCKNUT  
40. 0S-1603 [30] BOLT (1/2-20X1.5-IN)  
41. 123-4003 [1] SEAL-LIP TYPE  
42. 4J-2506 [2] SEAL-O-RING  
43. 4K-6804 [1] SEAL-O-RING  
44. 5C-9553 M [4] BOLT (M6X1X16-MM)  
45. 5F-3106 [1] SEAL-O-RING  
46. 5P-8245 [34] WASHER-HARD (13.5X25.5X3-MM THK)  
47. 7X-0909 M [4] BOLT (M12X1.75X140-MM)  
48. 7X-7729 [3] WASHER (11X25X3-MM THK)  
49. 8C-3347 [2] PIN-ROLL  
50. 8T-4121 [16] WASHER-HARD (11X21X2.5-MM THK)  
51. 8T-4195 M [19] BOLT (M10X1.5X30-MM)  
52. 9F-1399 [2] SEAL-O-RING  
53. 1U-8846 B [1] SEALANT-GASKET  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41890469
 

188-1408: DIFFERENTIAL & BEVEL GEAR GP

188-1408 DIFFERENTIAL & BEVEL GEAR GP -AXLE, CENTER
S/N B1M1-741
PART OF 147-6800 AXLE GP-CENTER
ALSO AN ATTACHMENT
i01473190 SEBP4189
1881408 DIFFERENTIAL & BEVEL GEAR GP Parts scheme
  For full view, you need register

Parts for your 730 ARTICULATED TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-4693 [1] CUP-BEARING  
2. 1P-4694 [1] CONE-BEARING  
3. 2D-9572 [1] SEAL-O-RING  
4. 3L-9409 [1] CUP-BEARING  
5. 3S-1374 [3] SPRING  
6. 5L-2031 [1] CUP-BEARING  
7. 5P-9505 [1] CONE-BEARING  
8. 6V-3950 [1] CONE-BEARING  
9. 7T-8858 [1] CONE-BEARING  
10. 8H-7801 [1] CONE-BEARING  
11. 8H-7803 [1] CUP-BEARING  
12. 8S-9075 [1] CONE-BEARING  
13. 8S-9076 [1] CUP-BEARING  
14. 9D-1853 [2] RETAINER  
15. 9D-1854 [1] SPACER-SPECIAL (12.7-MM THK)  
16. 127-1960 M [8] SCREW-FLAT HEAD (M6X1X16-MM)  
17. 136-6324 [7] DISC-FRICTION  
18. 138-1486 [1] CAGE-BEARING  
19. 138-1487 [1] RING-ADJUSTMENT  
20. 138-1488 [1] LOCK  
21. 138-1490 [3] SPACER (10.2X18X15-MM THK)  
22. 138-1497 [1] CAGE  
23. 138-1504 [1] PISTON HOUSING  
24. 138-3623 [1] CAGE  
25. 138-3624 [1] RING  
26. 138-3626 [1] LOCK  
27. 138-3628 [1] SPACER (79X103X16.4-MM THK)  
28. 138-3638 [1] HUB  
29. 138-4096 [5] SHIM (0.05-MM THK)  
30. 138-4097 [5] SHIM (0.08-MM THK)  
31. 138-4098 [3] SHIM (0.12-MM THK)  
32. 138-4099 [1] SHIM (0.5-MM THK)  
33. 1J-2860 [1] CUP-BEARING  
34. 147-6793 [1] GEAR SET-BEVEL (40-TEETH)  
35. 147-7246 [1] RETAINER-SEAL  
36. 151-8269 [1] HUB AS  
37. 151-8274 [7] PLATE-CLUTCH  
38. 151-8275 [2] PLATE-CLUTCH  
39. 151-8397 [2] PLATE  
40. 152-5464 [1] GEAR (33-TEETH)  
41. 160-8060 [1] PISTON  
42. 162-7183 [1] SEAL-LIP TYPE  
43. 163-1921 [1] TUBE  
44. 168-8410 [1] GEAR AS (33-TEETH)  
45. 176-5445 [1] SPACER (65.35X95.5X8-MM THK)  
46. 188-1002 Y [1] CARRIER GP-DIFFERENTIAL (AXLE, CENTER)  
47. 193-4303 CY [1] DIFFERENTIAL GP (DRIVE AXLE)  
48. 250-7858 [1] LOCKNUT  
49. 217-3252 [1] BEARING-NEEDLE  
50. 224-2323 [1] BEARING-THRUST  
51. 0S-1603 [30] BOLT (1/2-20X1.5-IN)  
52. 138-4114 [4] SHIM (0.08-MM THK)  
53. 138-4115 [5] SHIM (0.12-MM THK)  
54. 184-4338 [1] SHIM (0.92-MM THK)  
55. 1S-2199 [2] DOWEL  
56. 4J-2506 [2] SEAL-O-RING  
57. 4K-6804 [1] SEAL-O-RING  
58. 5C-9553 M [4] BOLT (M6X1X16-MM)  
59. 5P-8245 [34] WASHER-HARD (13.5X25.5X3-MM THK)  
60. 6V-5057 [1] SEAL-O-RING  
61. 7X-0909 M [4] BOLT (M12X1.75X140-MM)  
62. 7X-7729 [3] WASHER (11X25X3-MM THK)  
63. 8C-3347 [2] PIN-ROLL  
64. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
65. 8T-4195 M [13] BOLT (M10X1.5X30-MM)  
66. 9F-1399 [1] SEAL-O-RING  
67. 1U-8846 B SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Technical Information Bulletin
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
ECPC Valves May Fail on Cat Transmission Systems {3073, 3139, 3167}
Specifications
Relief Valve (Transmission Hydraulic Control)
725, 730 and 730 EJECTOR Articulated Trucks Power Train
Transmission Hydraulic Control
725, 730 and 730 EJECTOR Articulated Trucks Power Train
Systems Operation
Relief Valve (Transmission Hydraulic Control)
725, 730 and 730 EJECTOR Articulated Trucks Power Train
Transmission Hydraulic Control
725, 730 and 730 EJECTOR Articulated Trucks Power Train
Bench Test Procedures
Bench Test Procedure For A 725, 725C, 725C Series 2, 730and 730 Ejector Articulated Truck Transmission {3030, 3073, 3139}
Bench Test Procedure For A 725, 725C, 725C Series 2, 730and 730 Ejector Articulated Truck Transmission {3030, 3073, 3139}
Troubleshooting
MID 027 - CID 0707 - FMI 03
725, 730 , 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0707 - FMI 05
725, 730 , 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0707 - FMI 06
725, 730 , 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0708 - FMI 03
725, 730 , 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0708 - FMI 05
725, 730 , 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
MID 027 - CID 0708 - FMI 06
725, 730 , 730 EJECTOR, 735, 740 and 740 EJECTOR Articulated Trucks Power Train Electronic Control System - AT
Disassembly and Assembly
Relief Valve (Transmission Hydraulic Control) - Remove and Install
725, 730 and 730 EJECTOR Articulated Trucks Power Train
Service Magazine
An Improved Modulating Valve Is Now Used on Certain Cat Products {3139}
2013/06/26
An Improved O-Ring Seal is Now Used in the Transmission Clutch Solenoid Modulating Valves {3073, 3167}
2009/03/09

Caterpillar Parts SIS Catalog 730 :

CONTROL GP-TRANSMISSION HYD
234-2974 CONTROL GP-TRANSMISSION HYD
CONTROL GP-DIFFERENTIAL LOCK
209-0042 CONTROL GP-DIFFERENTIAL LOCK
CONTROL GP-DIFFERENTIAL LOCK
196-9238 CONTROL GP-DIFFERENTIAL LOCK
CASE GP-TRANSFER
233-0996 CASE GP-TRANSFER
CARRIER GP-PLANETARY
148-9350 CARRIER GP-PLANETARY
CARRIER GP-DIFFERENTIAL
369-1019 CARRIER GP-DIFFERENTIAL
CARRIER GP-DIFFERENTIAL
369-1018 CARRIER GP-DIFFERENTIAL
369-1017 CARRIER GP-DIFFERENTIAL
COOLER GP-OIL
275-7641 COOLER GP-OIL
COOLER GP-POWER TRAIN OIL
237-8054 COOLER GP-POWER TRAIN OIL
COOLER GP-TRANSMISSION OIL
227-8354 COOLER GP-TRANSMISSION OIL
COOLER GP-TRANSMISSION OIL
354-7467 COOLER GP-TRANSMISSION OIL
COOLER GP-TRANSMISSION OIL
354-7467 COOLER GP-TRANSMISSION OIL
COOLER GP-TRANSMISSION OIL
354-7467 COOLER GP-TRANSMISSION OIL
DIFFERENTIAL & BEVEL GEAR GP
147-6790 DIFFERENTIAL & BEVEL GEAR GP
DIFFERENTIAL & BEVEL GEAR GP
147-7380 DIFFERENTIAL & BEVEL GEAR GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.