FRAME AND BODY
SUPPRESSION GP-SOUNDTAILGATE GP
HOOD GP
LINES GP
FRAME AND BODY
SUPPRESSION GP-SOUND
#SEBP41900780
283-9149: SUPPRESSION GP-SOUND
283-9149 SUPPRESSION GP-SOUND
S/N B1N613-UP
PART OF 277-8756 SUPPRESSION AR-SOUND
AN ATTACHMENT
S/N B1N613-UP
PART OF 277-8756 SUPPRESSION AR-SOUND
AN ATTACHMENT
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2U-2452 | [10] | LOCKNUT | |
| 2. | 2U-2453 | [10] | WASHER (5.6X12.6X1.22-MM THK) | |
| 3. | 2U-2589 | [10] | BOLT | |
| 4. | 340-5233 | [10] | CLIP | |
| 5. | 7K-1181 | [4] | STRAP-CABLE | |
| 6. | 124-3243 E | SEAL (64-CM) | ||
| 6A. | 124-3243 E | SEAL (54-CM) | ||
| 6B. | 124-3243 E | SEAL (59-CM) | ||
| 6C. | 124-3243 E | SEAL (38-CM) | ||
| 7. | 215-4406 | [1] | PANEL-INSULATION (FRONT) | |
| 8. | 215-4407 | [1] | PANEL-INSULATION (REAR) | |
| 9. | 215-6564 | [1] | PANEL-INSULATION (END) | |
| 10. | 215-7475 | [1] | PLATE-BAFFLE | |
| 11. | 215-7476 | [1] | PLATE-BAFFLE | |
| 12. | 216-5114 | [2] | PLATE-SUPPORT | |
| 13. | 216-5115 | [1] | PLATE-SUPPORT | |
| 14. | 314-8309 C | [2] | STRIP-RUBBER | |
| 15. | 217-8014 | [2] | STRAP | |
| 16. | 217-9487 | [1] | SEAL | |
| 17. | 217-9645 | [1] | INSULATION | |
| 18. | 218-1507 | [2] | PLATE-SUPPORT | |
| 19. | 241-0607 | [1] | BRACKET AS | |
| 20. | 257-7094 | [1] | SEAL | |
| 21. | 263-9899 | [1] | PLATE-BAFFLE | |
| 22. | 263-9900 | [1] | PLATE-BAFFLE | |
| 23. | 266-4043 | [1] | SEAL-RUBBER | |
| 24. | 277-9910 | [1] | PLATE-BAFFLE | |
| 25. | 279-3189 | [1] | PLATE | |
| 26. | 9X-8699 E | SEAL (80-CM EACH) | ||
| 27. | 131-3540 M | [8] | LOCKNUT (M8X1.25-THD) | |
| 28. | 5C-7261 M | [6] | NUT (M8X1.25-THD) | |
| 29. | 5P-4116 | [8] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 30. | 7X-0578 | [8] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 31. | 7X-0613 | [3] | WASHER-HARD (8.8X25.5X5-MM THK) | |
| 32. | 7X-7729 | [16] | WASHER (11X25X3-MM THK) | |
| 33. | 8T-0389 M | [12] | LOCKNUT (M10X1.5-THD) | |
| 34. | 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | |
| 35. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 36. | 8T-4136 M | [12] | BOLT (M10X1.5X25-MM) | |
| 37. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 38. | 8T-4189 M | [3] | BOLT (M8X1.25X20-MM) | |
| 39. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 40. | 8T-4224 | [12] | WASHER-HARD (8.8X16X2-MM THK) | |
| 41. | 8T-4908 M | [8] | BOLT (M8X1.25X25-MM) | |
| 42. | 8T-7547 M | [6] | BOLT (M8X1.25X30-MM) | |
| 43. | 5P-5905 D | SEAL (0.6-M) | ||
| 43A. | 5P-5905 D | SEAL (0.13-M) | ||
| 43B. | 5P-5905 D | SEAL (0.18-M) | ||
| 43C. | 5P-5905 D | SEAL (1.1-M) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP41900781
232-0198: TAILGATE AR
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3U-2837 | [2] | PAD-THRUST | |
| 2. | 4U-3165 | [2] | DISC | |
| 4. | 233-1363 | [2] | PIVOT (TAILGATE) | |
| 5. | 154-4812 | [2] | ABSORBER-SHOCK | |
| 6. | 154-6369 B | [4] | SHIM (3-MM THK) | |
| 7. | 167-9033 B | [4] | SHIM (6-MM THK) | |
| 8. | 176-4022 | [1] | PLATE AS-TAILGATE | |
| 9. | 192-9067 | [4] | BUSHING | |
| 10. | 192-9068 | [2] | PIN | |
| 11. | 219-6336 | [2] | PLATE | |
| 12. | 257-7244 | [2] | LINK (LONG) | |
| 13. | 225-8755 | [2] | CHAIN AS | |
| 14. | 227-4058 | [1] | ARM AS (SCISSORS, RH) | |
| 15. | 227-4059 | [1] | ARM AS (SCISSORS, LH) | |
| 16. | 257-7245 | [2] | LINK (SHORT) | |
| 18. | 3E-9411 | [18] | WASHER-HARD (17.5X38X6-MM THK) | |
| 19. | 7X-2489 M | [4] | BOLT (M24X3X100-MM) | |
| 20. | 6V-7676 M | [6] | NUT (M24X3-THD) | |
| 21. | 6V-8237 | [6] | WASHER (26X44X4-MM THK) | |
| 22. | 7X-2554 M | [22] | BOLT (M16X2X70-MM) | |
| 23. | 7X-2557 M | [4] | BOLT (M16X2X140-MM) | |
| 24. | 9X-8257 | [16] | WASHER (17.5X30X3.5-MM THK) | |
| 25. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 26. | 8T-4167 | [4] | WASHER-HARD (26X44X4-MM THK) | |
| 27. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8T-4778 M | [4] | LOCKNUT (M16X2-THD) | |
| 29. | 9X-8913 M | [2] | BOLT (M24X3X300-MM) | |
| 30. | 8T-0668 M | [6] | BOLT (M24X3X110-MM) | |
| 31. | 7X-2475 M | [4] | BOLT (M16X2X130-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP41900782
300-8486: TAILGATE AR
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3U-2837 | [2] | PAD-THRUST | |
| 2. | 4U-3165 | [2] | DISC | |
| 3. | 154-4812 | [2] | ABSORBER-SHOCK | |
| 4. | 154-6369 B | [12] | SHIM (3-MM THK) | |
| 5. | 337-0716 B | [3] | SHIM (6-MM THK) | |
| 6. | 192-9067 | [4] | BUSHING | |
| 7. | 192-9068 | [2] | PIN | |
| 8. | 304-8267 | [1] | ARM AS (RH) | |
| 9. | 304-8268 | [1] | ARM AS (LH) | |
| 10. | 233-1363 | [2] | PIVOT (TAILGATE) | |
| 11. | 257-7244 B | [2] | LINK (LONG) | |
| 12. | 257-7245 B | [2] | LINK (SHORT) | |
| 13. | 300-8478 | [2] | CHAIN AS | |
| 14. | 300-8479 | [1] | PLATE AS (TAILGATE) | |
| 15. | 305-3593 | [2] | PLATE (ANCHOR) | |
| 16. | 305-4173 | [18] | SPACER (17.5X38X25-MM THK) | |
| 17. | 198-4771 | [6] | WASHER-HARD (26X47X12-MM THK) | |
| 18. | 198-4780 | [8] | WASHER-HARD (17.5X32X8-MM THK) | |
| 19. | 6V-7676 M | [6] | NUT (M24X3-THD) | |
| 20. | 6V-8132 M | [6] | BOLT (M24X3X120-MM) | |
| 21. | 7X-2489 M | [4] | BOLT (M24X3X100-MM) | |
| 22. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 23. | 7X-2557 M | [8] | BOLT (M16X2X140-MM) | |
| 24. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 25. | 8T-4167 | [12] | WASHER-HARD (26X44X4-MM THK) | |
| 26. | 8T-4175 M | [18] | BOLT (M16X2X90-MM) | |
| 27. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8T-4778 M | [4] | LOCKNUT (M16X2-THD) | |
| 29. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| 30. | 9X-8913 M | [2] | BOLT (M24X3X300-MM) | |
| 31. | 7X-2556 BM | [18] | BOLT (M16X2X100-MM) | |
| 32. | 8T-4173 BM | [18] | BOLT (M16X2X110-MM) | |
| 33. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 34. | 5D-9231 | [2] | CONNECTOR | |
| 35. | 5U-7151 | [2] | CAP-GREASE | |
| 36. | 8L-6557 | [2] | CONNECTOR | |
| 37. | 250-3345 I | [1] | HOSE AS | |
| 38. | 7X-2558 BM | [8] | BOLT (M16X2X150-MM) | |
| 39. | 360-4699 B | [2] | SHIM (1-MM THK) | |
| 40. | 169-4040 B | [4] | SHIM (2-MM THK) | |
| B | USE AS REQUIRED | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP41900783
152-7024: TILT GP-HOOD
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 204-7016 | [1] | ACTUATOR GP-POWER (HOOD TILT) | |
| 8N-1540 | [1] | PIN-CONNECTOR (12-GA TO 14-GA) | ||
| 8N-1541 | [1] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 2. | 206-7688 | [1] | BRACKET AS | |
| 3. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 4. | 8T-4139 M | [3] | BOLT (M12X1.75X30-MM) | |
| 5. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | |
| M | METRIC PART | |||
#SEBP41900784
152-7024: TILT GP-HOOD
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 277-6918 C | [1] | ACTUATOR AS | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 206-7688 | [1] | BRACKET AS | |
| 3. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 4. | 8T-4139 M | [3] | BOLT (M12X1.75X30-MM) | |
| 5. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 6. | 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | |
| 7. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP41900785
191-5963: TILT GP-HOOD
191-5963 TILT GP-HOOD -RH
S/N B1N1-UP
PART OF 152-7025, 223-1464 HOOD GP-ENGINE
ALSO AN ATTACHMENT
S/N B1N1-UP
PART OF 152-7025, 223-1464 HOOD GP-ENGINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 188-0432 | [4] | BEARING | |
| 2. | 188-0433 | [1] | PLATE | |
| 3. | 192-1180 | [1] | PLATE AS | |
| 4. | 192-1181 | [8] | WASHER-PLASTIC (18.1X30X1.5-MM THK) | |
| 5. | 207-4296 | [1] | LINK-FRONT | |
| 6. | 207-4297 | [1] | LINK-REAR | |
| 7. | 207-4715 | [1] | CONNECTOR AS | |
| 8. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| 9. | 176-5311 M | [4] | LOCKNUT (M16X2-THD) | |
| 10. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 11. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| M | METRIC PART | |||
#SEBP41900786
202-6378: TILT GP-HOOD
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 188-0432 | [4] | BEARING | |
| 2. | 188-0433 | [1] | PLATE | |
| 3. | 192-1180 | [1] | PLATE AS | |
| 4. | 192-1181 | [8] | WASHER-PLASTIC (18.1X30X1.5-MM THK) | |
| 5. | 207-4296 | [1] | LINK-FRONT | |
| 6. | 207-4715 | [1] | CONNECTOR AS | |
| 7. | 217-6348 | [1] | LINK AS | |
| 7X-7729 | [2] | WASHER (11X25X3-MM THK) | ||
| 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | ||
| 217-6350 | [1] | LINK-FRONT | ||
| 217-6351 | [1] | LINK-REAR | ||
| 8. | 176-5311 M | [4] | LOCKNUT (M16X2-THD) | |
| 9. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 10. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 11. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
#SEBP41900787
260-2607: TILT GP-HOOD
260-2607 TILT GP-HOOD -LH
S/N B1N134-UP
PART OF 152-7025, 223-1464 HOOD GP-ENGINE
ALSO AN ATTACHMENT
S/N B1N134-UP
PART OF 152-7025, 223-1464 HOOD GP-ENGINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 188-0432 | [4] | BEARING | |
| 2. | 318-2240 | [1] | PLATE AS | |
| 3. | 318-2243 | [1] | PLATE | |
| 4. | 192-1181 | [8] | WASHER-PLASTIC (18.1X30X1.5-MM THK) | |
| 5. | 207-4715 | [1] | CONNECTOR AS | |
| 6. | 260-2610 | [1] | LINK AS-ADJUSTMENT | |
| 7X-7729 | [2] | WASHER (11X25X3-MM THK) | ||
| 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | ||
| 217-6350 | [1] | LINK-FRONT (FRONT) | ||
| 217-6351 | LINK-REAR (REAR) | |||
| 260-2612 | [1] | SPACER | ||
| 7. | 260-2611 | [1] | LINK-FRONT | |
| 8. | 176-5311 M | [4] | LOCKNUT (M16X2-THD) | |
| 9. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 10. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 11. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
#SEBP41900788
254-6753: VALVE GP-LUBE DISTRIBUTION
254-6753 VALVE GP-LUBE DISTRIBUTION -12-INJECTOR
S/N B1N1-UP
PART OF 254-6752 LINES GP-AUTOMATIC LUBRICATION
AN ATTACHMENT
S/N B1N1-UP
PART OF 254-6752 LINES GP-AUTOMATIC LUBRICATION
AN ATTACHMENT
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 177-3517 | [6] | INJECTOR AS-GREASE (NO. 4) | |
| 2. | 177-3518 | [3] | INJECTOR AS-GREASE (NO. 8) | |
| (EACH INJECTOR AS INCLUDES) | ||||
| 277-3072 M | [1] | NUT (M10X1-THD) | ||
| 277-3073 | [1] | FITTING-COMPRESSION | ||
| 3. | 177-3524 | [11] | PLUG | |
| 4. | 178-2734 | [1] | PLUG | |
| 5. | 220-8581 | [1] | BLOCK (12-INJECTOR) | |
| 6. | 221-1583 | [4] | COUPLING | |
| 7. | 178-2746 | [1] | INJECTOR AS-GREASE (NO. 9) | |
| 277-3072 M | [1] | NUT (M10X1-THD) | ||
| 277-3073 | [1] | FITTING-COMPRESSION | ||
| 8. | 161-9030 E | HOSE (310-CM EACH) | ||
| 8A. | 161-9030 E | HOSE (230-CM EACH) | ||
| 8B. | 161-9030 E | HOSE (250-CM) | ||
| 8C. | 161-9030 E | HOSE (25-CM EACH) | ||
| 8D. | 161-9030 E | HOSE (28-CM) | ||
| 9. | 192-6212 | [1] | INJECTOR AS-GREASE (NO. 10) | |
| 277-3072 M | [1] | NUT (M10X1-THD) | ||
| 277-3073 | [1] | FITTING-COMPRESSION | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP41900789
254-6756: VALVE GP-LUBE DISTRIBUTION
254-6756 VALVE GP-LUBE DISTRIBUTION -REAR, 7-INJECTOR
S/N B1N1-UP
PART OF 254-6755 LINES GP-AUTOMATIC LUBRICATION
AN ATTACHMENT
S/N B1N1-UP
PART OF 254-6755 LINES GP-AUTOMATIC LUBRICATION
AN ATTACHMENT
For full view, you need register
Parts for your 735 ARTICULATED TRUCK:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 177-3524 | [7] | PLUG | |
| 2. | 178-2746 | [5] | INJECTOR AS-GREASE (NO. 9) | |
| (EACH INCLUDES) | ||||
| 277-3072 M | [1] | NUT (M10X1-THD) | ||
| 277-3073 | [1] | FITTING-COMPRESSION | ||
| 3. | 179-1660 | [2] | PLUG | |
| 4. | 221-1584 | [2] | COUPLING | |
| 5. | 221-1585 | [2] | INJECTOR AS-GREASE (NO. 8.5) | |
| (EACH INCLUDES) | ||||
| 277-3072 M | [1] | NUT (M10X1-THD) | ||
| 277-3073 | [1] | FITTING-COMPRESSION | ||
| 6. | 220-8573 | [1] | BLOCK (7-INJECTOR) | |
| 7. | 161-9030 E | HOSE (90-CM EACH) | ||
| 7A. | 161-9030 E | HOSE (200-CM) | ||
| 7B. | 161-9030 E | HOSE (250-CM) | ||
| 8. | 192-5987 | [2] | GASKET | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
