AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

252-9395 GUARD GP-RADIATOR S/N B1R1-UP PART OF 238-8921 GUARD GP-RADIATOR 740 EJECTOR TRUCK


COOLING SYSTEM
RADIATOR GP
FRAME AND BODY
HITCH GP
GUARD GP
HOOD GP

EJECTOR TRUCK 740 EJECTOR TRUCK B1R
 740 Ejector Articulated Truck B1R00001-UP (MACHINE) POWERED BY C15 Engine SEBP4192 740 B1R   (2005)

COOLING SYSTEM

RADIATOR GP
GUARD GP-RADIATOR
238-8921 GUARD GP-RADIATOR
GUARD GP-RADIATOR
238-8921 GUARD GP-RADIATOR
GUARD GP-RADIATOR
252-9395 GUARD GP-RADIATOR
 

#SEBP41920610
 

252-9395: GUARD GP-RADIATOR

252-9395 GUARD GP-RADIATOR
S/N B1R1-UP
PART OF 238-8921 GUARD GP-RADIATOR
i02239607 SEBP4192
2529395 GUARD GP-RADIATOR Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-6940 [1] GRILL (TOP)  
2. 252-9396 [1] GRILL (BOTTOM)  
3. 252-9397 [1] PANEL AS (RH)  
4. 089-7960 [20] WASHER (5.3X25X1.6-MM THK)  
5. 5C-2874 M [20] NUT (M5X0.8-THD)  
  M   METRIC PART
 

#SEBP41920611
 

190-2768: HITCH GP

190-2768 HITCH GP
S/N B1R1-UP
PART OF 141-6857 HITCH GP-OSCILLATING
i03502080 SEBP4192
1902768 HITCH GP Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-8351 [1] PIVOT AS  
2. 153-8352 [1] TUBE  
3. 7X-2489 M [2] BOLT (M24X3X100-MM)  
4. 8T-4167 [28] WASHER-HARD (26X44X4-MM THK)  
5. 8T-6380 M [26] BOLT (M24X3X130-MM)  
  M   METRIC PART
 

#SEBP41920612
 

141-6857: HITCH GP-OSCILLATING

141-6857 HITCH GP-OSCILLATING
S/N B1R1-359
PART OF 204-2014 AXLE & FRAME AR
i01444951 SEBP4192
1416857 HITCH GP-OSCILLATING Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2U-5388 [1] SEAL-V-RING  
2. 3B-8485 [2] ELBOW  
3. 5U-7151 [2] CAP-GREASE  
4. 107-8126 [2] BEARING  
5. 156-4078 [1] PIN-HITCH  
6. 156-4081 [1] WASHER (115X118X5-MM THK)  
7. 156-4083 [1] SPACER-SPECIAL (13-MM THK)  
8. 156-4085 [1] WASHER-SPECIAL  
9. 156-4087 [1] SPACER (8.6-MM THK)  
10. 185-4306 [1] WASHER-SPECIAL  
11. 300-3930 [1] PIN-HITCH  
12. 187-3579 [1] SPACER-BEARING  
13. 190-2768 Y [1] HITCH GP  
14. 195-3659 [1] SPACER (80X118X14-MM THK)  
15. 170-8555 M [2] BOLT (M16X2X90-MM)  
16. 1H-6227 [1] SEAL-O-RING  
17. 1K-6992 [1] RING-LOCK  
18. 2H-3931 [1] SEAL-O-RING  
19. 8T-0658 M [1] BOLT (M20X2.5X180-MM)  
20. 6V-8569 M [1] BOLT (M20X2.5X200-MM)  
21. 153-5044 [1] WASHER-HARD (21.5X45X6-MM THK)  
22. 8T-4132 M [2] NUT (M16X2-THD)  
23. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
24. 8T-3282 [1] WASHER-HARD (22X35X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41920613
 

141-6857: HITCH GP-OSCILLATING

141-6857 HITCH GP-OSCILLATING
S/N B1R360-UP
PART OF 204-2014 AXLE & FRAME AR
i02713533 SEBP4192
1416857 HITCH GP-OSCILLATING Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2U-5388 [1] SEAL-V-RING  
2. 3B-8485 [2] ELBOW  
3. 5U-7151 [2] CAP-GREASE  
4. 332-1648 [2] BEARING-SELF-ALIGNING  
5. 156-4078 [1] PIN-HITCH  
6. 461-2111 [1] WASHER (115X180X5-MM THK)  
7. 156-4083 [1] SPACER-SPECIAL (13-MM THK)  
8. 425-3355 [1] WASHER  
9. 156-4087 [1] SPACER (8.6-MM THK)  
10. 185-4306 [1] WASHER-SPECIAL  
11. 301-6951 [1] PIN-HITCH  
12. 187-3579 [1] SPACER-BEARING  
13. 190-2768 Y [1] HITCH GP  
14. 195-3659 [1] SPACER (80X118X14-MM THK)  
15. 170-8555 M [2] BOLT (M16X2X90-MM)  
16. 1H-6227 [1] SEAL-O-RING  
17. 1K-6992 [1] RING-LOCK  
18. 2H-3931 [1] SEAL-O-RING  
20. 6V-8569 M [2] BOLT (M20X2.5X200-MM)  
21. 153-5044 [2] WASHER-HARD (21.5X45X6-MM THK)  
22. 8T-4132 M [2] NUT (M16X2-THD)  
23. 9X-8257 [2] WASHER (17.5X30X3.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41920614
 

228-2605: HOOD & GUARD AR

228-2605 HOOD & GUARD AR
S/N B1R1-UP
PART OF 227-0746 GENERAL AR
i02627299 SEBP4192
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  162-5126 Y [1] GUARD GP-PLATFORM  
    S/N B1R1-258
  289-4713 Y [1] GUARD GP-PLATFORM  
    S/N B1R259-UP
  238-8921 Y [1] GUARD GP-RADIATOR  
  149-0104 Y [1] GUARD GP-WINDOW  
  152-7025 Y [1] HOOD GP-ENGINE  
  152-7024 Y [1] TILT GP-HOOD  
  Y   SEPARATE ILLUSTRATION
 

#SEBP41920615
 

152-7025: HOOD GP-ENGINE

152-7025 HOOD GP-ENGINE
S/N B1R1-193
PART OF 228-2605 HOOD & GUARD AR
i02251943 SEBP4192
1527025 HOOD GP-ENGINE Parts scheme 1527025 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-2773 [2] SOCKET  
2. 187-4425 [1] GRILL AS  
  4I-7924 [2] WASHER (4.5X40X1.2-MM THK)  
  123-0707 M [2] SCREW-HEX SOCKET (M4X0.7X20-MM)  
  178-9983 M [2] LOCKNUT (M4X0.7-THD)  
  196-1044 [1] PLATE (CATERPILLAR)  
3. 260-2608 C [1] FRAME AS-HOOD  
4. 190-0282 [1] DUCT  
5. 190-2171 [1] BRACKET AS (RH)  
6. 190-2172 [1] BRACKET AS (LH)  
    (EACH BRACKET AS INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
7. 191-5963 Y [1] TILT GP-HOOD (RH)  
8. 191-5964 [1] HOOD AS  
  202-7837 [22] SUPPORT  
  218-3528 [2] STRIP  
9. 192-5453 [1] SUPPORT AS-HOOD  
10. 193-3809 [2] PIN-GUIDE  
11. 260-2607 CY [1] TILT GP-HOOD (LH)  
12. 202-7838 [22] RETAINER  
13. 202-7839 [22] FASTENER  
14. 206-8077 [2] PLATE-ANGLE  
15. 209-2287 [1] BAFFLE  
16. 209-2288 [1] PLATE  
17. 210-1917 [1] GRILL  
18. 216-2218 [2] PLATE-SPACER  
19. 217-0561 [1] LINER (TOP RH)  
20. 217-0562 [1] LINER (TOP LH)  
21. 217-0563 [1] LINER (TOP LH)  
22. 217-0564 [1] LINER (LOWER RH)  
23. 217-0565 [1] LINER (LOWER LH)  
24. 217-0566 [1] LINER (UPPER RH)  
25. 217-0567 [1] LINER (UPPER LH)  
26. 218-2529 [8] PLUG  
27. 237-5510 Y [1] WIRING GP-LIGHTING  
28. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
29. 5C-7261 M [6] NUT (M8X1.25-THD)  
30. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
31. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
32. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
33. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
34. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
35. 7X-7729 [25] WASHER (11X25X3-MM THK)  
36. 8T-0338 M [2] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
37. 8T-4121 [26] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4133 M [4] NUT (M10X1.5-THD)  
39. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
41. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
42. 8T-4186 CM [6] BOLT (M10X1.5X40-MM)  
43. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
44. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
45. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
46. 8T-4244 M [4] NUT (M12X1.75-THD)  
47. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
48. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
49. 8T-5005 CM [6] BOLT (M10X1.5X70-MM)  
50. 8T-4172 CM [1] BOLT (M10X1.5X80-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41920616
 

152-7025: HOOD GP-ENGINE

152-7025 HOOD GP-ENGINE
S/N B1R194-405
PART OF 228-2605 HOOD & GUARD AR
i02506511 SEBP4192
1527025 HOOD GP-ENGINE Parts scheme 1527025 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-2773 [2] SOCKET  
2. 187-4425 [1] GRILL AS  
  4I-7924 [2] WASHER (4.5X40X1.2-MM THK)  
  123-0707 M [2] SCREW-HEX SOCKET (M4X0.7X20-MM)  
  178-9983 M [2] LOCKNUT (M4X0.7-THD)  
  196-1044 [1] PLATE (CATERPILLAR)  
3. 190-0282 [1] DUCT  
4. 190-2171 [1] BRACKET AS (RH)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
5. 190-2172 [1] BRACKET AS (LH)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
6. 191-5963 Y [1] TILT GP-HOOD (RH)  
7. 191-5964 [1] HOOD AS  
8. 192-5453 [1] SUPPORT AS-HOOD  
9. 193-3809 [2] PIN-GUIDE  
10. 202-7838 [22] RETAINER  
11. 202-7839 [22] FASTENER  
12. 206-8077 [2] PLATE-ANGLE  
13. 209-2287 [1] BAFFLE  
14. 209-2288 [1] PLATE  
15. 210-1917 [1] GRILL  
16. 216-2218 [2] PLATE-SPACER  
17. 217-0561 [1] LINER (TOP RH)  
18. 217-0562 [1] LINER (TOP LH)  
19. 217-0563 [1] LINER (TOP LH)  
20. 217-0564 [1] LINER (LOWER RH)  
21. 217-0565 [1] LINER (LOWER LH)  
22. 217-0566 [1] LINER (UPPER RH)  
23. 217-0567 [1] LINER (UPPER LH)  
24. 218-2529 [8] PLUG  
25. 237-5510 Y [1] WIRING GP-LIGHTING  
26. 260-2607 Y [1] TILT GP-HOOD (LH)  
27. 277-8312 C [1] FRAME AS-HOOD  
28. 287-5590 [2] PLATE AS  
29. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
30. 5C-7261 M [6] NUT (M8X1.25-THD)  
31. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
32. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
34. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
35. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
36. 7X-7729 [25] WASHER (11X25X3-MM THK)  
37. 8T-0338 M [2] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
38. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
40. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
41. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
42. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
43. 8T-4186 M [5] BOLT (M10X1.5X40-MM)  
44. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
45. 8T-4223 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4244 M [4] NUT (M12X1.75-THD)  
48. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
49. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
50. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41920617
 

152-7025: HOOD GP-ENGINE

152-7025 HOOD GP-ENGINE
S/N B1R406-UP
PART OF 228-2605 HOOD & GUARD AR
i02915720 SEBP4192
1527025 HOOD GP-ENGINE Parts scheme 1527025 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-2773 [2] SOCKET  
2. 187-4425 [1] GRILL AS  
  4I-7924 [2] WASHER (4.5X40X1.2-MM THK)  
  123-0707 M [2] SCREW-HEX SOCKET (M4X0.7X20-MM)  
  178-9983 M [2] LOCKNUT (M4X0.7-THD)  
  196-1044 [1] PLATE (CATERPILLAR)  
3. 190-0282 [1] DUCT  
4. 190-2171 [1] BRACKET AS (LH)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
5. 190-2172 [1] BRACKET AS (RH)  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
6. 191-5963 Y [1] TILT GP-HOOD (RH)  
7. 191-5964 [1] HOOD AS  
  202-7837 [22] SUPPORT  
  218-3528 [2] STRIP  
8. 192-5453 [1] SUPPORT AS-HOOD  
9. 193-3809 [2] PIN-GUIDE  
10. 202-7838 [22] RETAINER  
11. 202-7839 [22] FASTENER  
12. 206-8077 [2] PLATE-ANGLE  
13. 209-2287 [1] BAFFLE  
14. 209-2288 [1] PLATE  
15. 210-1917 [1] GRILL  
16. 216-2218 [2] PLATE-SPACER  
17. 217-0561 [1] LINER (TOP RH)  
18. 217-0562 [1] LINER (TOP LH)  
19. 217-0563 [1] LINER (TOP LH)  
20. 217-0564 [1] LINER (LOWER RH)  
21. 217-0565 [1] LINER (LOWER LH)  
22. 217-0566 [1] LINER (UPPER RH)  
23. 217-0567 [1] LINER (UPPER LH)  
24. 218-2529 [8] PLUG  
25. 237-5510 Y [1] WIRING GP-LIGHTING  
26. 260-2607 Y [1] TILT GP-HOOD (LH)  
27. 277-8312 [1] FRAME AS-HOOD  
  7T-1099 [5] LINK  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
28. 287-5590 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
29. 316-2311 C [2] PLATE  
30. 316-2314 C [2] SEAL  
31. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
32. 5C-7261 M [6] NUT (M8X1.25-THD)  
33. 5P-1076 C [8] WASHER-HARD (13.5X30X4-MM THK)  
34. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
35. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
36. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
37. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
38. 7X-7729 [25] WASHER (11X25X3-MM THK)  
39. 8T-0338 M [2] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
40. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
41. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
42. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
43. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
44. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
45. 8T-4186 M [5] BOLT (M10X1.5X40-MM)  
46. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
47. 8T-4223 C [16] WASHER-HARD (13.5X25.5X3-MM THK)  
48. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
49. 8T-4244 M [4] NUT (M12X1.75-THD)  
50. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
51. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
52. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
53. 323-9871 [2] SHIM  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41920618
 

223-1464: HOOD GP-ENGINE

223-1464 HOOD GP-ENGINE
S/N B1R1-405
PART OF 290-8546 PRECLEANER AR
AN ATTACHMENT
i02527585 SEBP4192
2231464 HOOD GP-ENGINE Parts scheme 2231464 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-2773 [2] SOCKET  
2. 187-4425 [1] GRILL AS  
  4I-7924 [2] WASHER (4.5X40X1.2-MM THK)  
  123-0707 M [2] SCREW-HEX SOCKET (M4X0.7X20-MM)  
  178-9983 M [2] LOCKNUT (M4X0.7-THD)  
  196-1044 [1] PLATE (CATERPILLAR)  
3. 190-2171 [1] BRACKET AS  
4. 190-2172 [1] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
5. 191-5963 Y [1] TILT GP-HOOD (RH)  
6. 192-5453 [1] SUPPORT AS-HOOD  
7. 193-3809 [2] PIN-GUIDE  
8. 202-7838 [21] RETAINER  
9. 202-7839 [21] FASTENER  
10. 206-8077 [2] PLATE-ANGLE  
11. 209-2287 [1] BAFFLE  
12. 209-2288 [1] PLATE  
13. 210-1917 [1] GRILL  
14. 216-2218 [2] PLATE-SPACER  
15. 217-0561 [1] LINER (TOP RH)  
16. 217-0562 [1] LINER (TOP LH)  
17. 217-0563 [1] LINER (TOP LH)  
18. 217-0564 [1] LINER (LOWER, RH)  
19. 217-0566 [1] LINER (UPPER, RH)  
20. 218-2529 [6] PLUG  
21. 223-1465 [1] HOOD AS  
  202-7837 [21] SUPPORT  
  218-3528 [2] STRIP  
22. 223-1887 [1] LINER-HOOD (LOWER, LH)  
23. 237-5510 Y [1] WIRING GP-LIGHTING  
24. 260-2607 Y [1] TILT GP-HOOD (LH)  
25. 277-8312 [1] FRAME AS-HOOD  
  7T-1099 [5] LINK  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
26. 287-5590 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
27. 290-8579 [1] LINER-UPPER  
28. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
29. 5C-7261 M [6] NUT (M8X1.25-THD)  
30. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
31. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
32. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
33. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
34. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
35. 7X-7729 [20] WASHER (11X25X3-MM THK)  
36. 8T-0338 M [2] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
37. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
38. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
39. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
40. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
41. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
42. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
43. 8T-4223 [20] WASHER-HARD (13.5X25.5X3-MM THK)  
44. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
45. 8T-4244 M [4] NUT (M12X1.75-THD)  
46. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
47. 8T-4956 M [4] BOLT (M12X1.75X35-MM)  
48. 8T-5005 M [6] BOLT (M10X1.5X70-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP41920619
 

223-1464: HOOD GP-ENGINE

223-1464 HOOD GP-ENGINE
S/N B1R406-UP
PART OF 290-8546 PRECLEANER AR
AN ATTACHMENT
i02916501 SEBP4192
2231464 HOOD GP-ENGINE Parts scheme 2231464 HOOD GP-ENGINE Parts scheme
  For full view, you need register

Parts for your 740 EJECTOR TRUCK:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9G-2773 [2] SOCKET  
2. 187-4425 [1] GRILL AS  
  4I-7924 [2] WASHER (4.5X40X1.2-MM THK)  
  123-0707 M [2] SCREW-HEX SOCKET (M4X0.7X20-MM)  
  178-9983 M [2] LOCKNUT (M4X0.7-THD)  
  196-1044 [1] PLATE (CATERPILLAR)  
3. 190-2171 [1] BRACKET AS  
4. 190-2172 [1] BRACKET AS  
    (EACH BRACKET AS INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
5. 191-5963 Y [1] TILT GP-HOOD (RH)  
6. 192-5453 [1] SUPPORT AS-HOOD  
7. 193-3809 [2] PIN-GUIDE  
8. 202-7838 [21] RETAINER  
9. 202-7839 [21] FASTENER  
10. 206-8077 [2] PLATE-ANGLE  
11. 209-2287 [1] BAFFLE  
12. 209-2288 [1] PLATE  
13. 210-1917 [1] GRILL  
14. 216-2218 [2] PLATE-SPACER  
15. 217-0561 [1] LINER (TOP RH)  
16. 217-0562 [1] LINER (TOP LH)  
17. 217-0563 [1] LINER (TOP LH)  
18. 217-0564 [1] LINER (LOWER RH)  
19. 217-0566 [1] LINER (UPPER RH)  
20. 218-2529 [6] PLUG  
21. 223-1465 [1] HOOD AS  
  202-7837 [21] SUPPORT  
22. 223-1887 [1] LINER-HOOD (LOWER, LH)  
23. 237-5510 Y [1] WIRING GP-LIGHTING  
24. 260-2607 Y [1] TILT GP-HOOD (LH)  
25. 277-8312 [1] FRAME AS-HOOD  
  7T-1099 [5] LINK  
  8T-3597 M [4] NUT-WELD (M12X1.75-THD)  
26. 287-5590 [2] PLATE AS  
    (EACH INCLUDES)
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
27. 290-8579 [1] LINER-UPPER (LH)  
28. 316-2311 C [2] PLATE  
29. 316-2314 C [2] SEAL  
30. 131-3540 M [8] LOCKNUT (M8X1.25-THD)  
31. 5C-7261 M [6] NUT (M8X1.25-THD)  
32. 5P-1076 C [8] WASHER-HARD (13.5X30X4-MM THK)  
33. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
34. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
35. 6V-9189 M [2] LOCKNUT (M8X1.25-THD)  
36. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
37. 7X-7729 [20] WASHER (11X25X3-MM THK)  
38. 8T-0338 M [2] BOLT-SOCKET HEAD (M8X1.25X45-MM)  
39. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
40. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
41. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
42. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
43. 8T-4184 M [2] BOLT (M12X1.75X45-MM)  
44. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
45. 8T-4223 C [16] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 8T-4224 [6] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4244 M [4] NUT (M12X1.75-THD)  
48. 8T-4908 M [8] BOLT (M8X1.25X25-MM)  
49. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
50. 8T-5005 M [4] BOLT (M10X1.5X70-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 740 :

GUARD GP-RADIATOR
238-8921 GUARD GP-RADIATOR
GUARD GP-RADIATOR
238-8921 GUARD GP-RADIATOR
GUARD GP-PLATFORM
289-4713 GUARD GP-PLATFORM
GUARD GP-PLATFORM
162-5126 GUARD GP-PLATFORM
GUARD GP-MUD
209-3531 GUARD GP-MUD
GUARD GP-HYDRAULIC TANK
200-0148 GUARD GP-HYDRAULIC TANK
GUARD GP-EJECTOR SPILL
192-4573 GUARD GP-EJECTOR SPILL
GUARD GP-CRANKCASE
298-5916 GUARD GP-CRANKCASE
HITCH GP
190-2768 HITCH GP
HITCH GP-OSCILLATING
141-6857 HITCH GP-OSCILLATING
HITCH GP-OSCILLATING
141-6857 HITCH GP-OSCILLATING
228-2605 HOOD & GUARD AR
HOOD GP-ENGINE
152-7025 HOOD GP-ENGINE
HOOD GP-ENGINE
152-7025 HOOD GP-ENGINE
HOOD GP-ENGINE
152-7025 HOOD GP-ENGINE
HOOD GP-ENGINE
223-1464 HOOD GP-ENGINE
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.