OPERATOR STATION
HEATER GPSEAT GP
RADIO GP
AIR CONDITIONER GP
OPERATOR STATION
HEATER GP
#SEBP41951140
205-3645: HEATER GP-CAB
205-3645 HEATER GP-CAB
S/N J8B1-1882
PART OF 263-3278 HEATER GP-CAB
FIELD REPLACEMENT ORDER @@@@@339-8555@@@@@, @@@@@339-8556@@@@@, @@@@@339-8557@@@@@, @@@@@339-8558@@@@@, @@@@@339-8559@@@@@, @@@@@339-8560@@@@@, @@@@@339-8561@@@@@, @@@@@339-8562@@@@@
ALSO AN ATTACHMENT
S/N J8B1-1882
PART OF 263-3278 HEATER GP-CAB
FIELD REPLACEMENT ORDER @@@@@339-8555@@@@@, @@@@@339-8556@@@@@, @@@@@339-8557@@@@@, @@@@@339-8558@@@@@, @@@@@339-8559@@@@@, @@@@@339-8560@@@@@, @@@@@339-8561@@@@@, @@@@@339-8562@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(HEATER, AIR CONDITIONER) | |
| 2. | 3E-5464 | [1] | SWITCH AS-THERMOSTAT (HVAC)(HEATER, AIR CONDITIONER) | |
| 3. | 5V-1474 | [12] | SCREW-FORMING (10-16X0.625-IN) | |
| 4. | 9X-2185 | [3] | SCREW (8-15X0.44-IN) | |
| 5. | 131-3093 | [1] | BUSHING | |
| 6. | 133-8715 | [1] | GROMMET | |
| 7. | 136-6505 | [2] | INSULATION | |
| 8. | 306-9992 | [1] | COIL AS-HEATER | |
| 9. | 216-8732 | [1] | COIL AS-EVAPORATOR | |
| 10. | [1] | COVER | ||
| 11. | 225-2338 | [1] | GASKET | |
| 12. | 225-2339 | [1] | SEAL | |
| 13. | 245-1596 | [1] | ACTUATOR | |
| 14. | 248-2921 Y | [1] | RESISTOR GP-CAB HEATER | |
| 15. | 248-2923 | [3] | FITTING-DRAIN | |
| 16. | 248-2931 | [1] | PLATE | |
| 17. | 248-6772 | [4] | SCREW-MACHINE (8-16X7.75-IN) | |
| 18. | 249-9311 | [1] | HARNESS AS-HEATER & AIR COND | |
| 239-9368 | [1] | RESISTOR AS | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 19. | 264-0461 | [1] | PLATE | |
| 20. | 264-0462 | [1] | PLATE | |
| 21. | 264-0465 | [1] | PLATE AS | |
| 22. | 264-0466 | [1] | PLATE AS | |
| 23. | 264-0467 | [1] | PLATE | |
| 24. | 264-0468 | [1] | PLATE | |
| 25. | 268-8792 | [1] | MOTOR AS-BLOWER (24-VOLT, A/C, HEATER) | |
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 26. | 264-1476 | [1] | VALVE AS-WATER | |
| 27. | 266-3447 | [1] | CASE AS | |
| 117-9066 | [1] | LATCH AS | ||
| 28. | 129-3178 M | [9] | LOCKNUT (M6X1-THD) | |
| 29. | 3B-4501 | [2] | LOCKWASHER | |
| 30. | 4M-6582 | [1] | SEAL-O-RING | |
| 31. | 4P-8134 | [3] | CLIP (LADDER) | |
| 32. | 6C-3680 | [2] | RIVET-POP | |
| 33. | 6P-1301 | [1] | GROMMET | |
| 34. | 6V-7357 M | [5] | BOLT (M6X1X25-MM) | |
| 35. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 36. | 8T-6631 | [2] | SCREW-MACHINE (8-32X0.5-IN) | |
| 37. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| 38. | 5P-5639 D | SEAL (0.26-M EACH) | ||
| 39. | 267-8575 H | TUBE (6-DM EACH) | ||
| 40. | 278-3354 | [1] | FILM-INSTRUCTION (HVAC WATER, DRAINING, FILLING) | |
| 41. | 225-4174 | [1] | FITTING-DRAIN | |
| 42. | 5P-7070 D | INSULATION-STRIP (1.3-M) | ||
| 43. | 3S-2093 | [7] | STRAP-CABLE | |
| D | ORDER BY THE METER | |||
| H | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41951141
207-1407: HEATER GP-CAB
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 209-8217 | [1] | FILTER ELEMENT-CAB AIR (STANDARD EFFICIENCY)(CAB) | |
| 2. | 216-4998 | [1] | PLATE AS | |
| 3. | 238-0479 | [1] | FILTER ELEMENT-AIR (STANDARD)(CAB) | |
| 4. | 248-2929 | [1] | GASKET | |
| 5. | 248-2930 | [1] | GASKET | |
| 6. | 263-3278 Y | [1] | HEATER GP-CAB | |
| 7. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 8. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 9. | 5P-6882 D | SEAL (0.2-M) | ||
| 10. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 11. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 12. | 280-8785 | [1] | BRACKET AS | |
| 13. | 7K-1181 | [1] | STRAP-CABLE | |
| 14. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 15. | 242-1583 M | [2] | STUD (M10X1.5X75-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41951142
263-3278: HEATER GP-CAB
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP41951143
174-2231: HOUSING GP-SEAT SUSPENSION
174-2231 HOUSING GP-SEAT SUSPENSION
S/N J8B1-2203
PART OF 160-7165 SUSPENSION GP-SEAT
ALSO AN ATTACHMENT
S/N J8B1-2203
PART OF 160-7165 SUSPENSION GP-SEAT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1Y-7927 | [1] | PIN | |
| 2. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| 3. | 2M-7819 | [4] | RING-RETAINING | |
| 4. | 3D-2975 | [2] | RING-RETAINING | |
| 5. | 4B-5059 | [6] | WASHER (15X29.5X2.5-MM THK) | |
| 6. | 4N-2927 | [2] | RACE-THRUST BEARING | |
| 7. | 5D-4822 | [2] | RING-RETAINING | |
| 8. | 5P-8445 | [4] | RING-RETAINING | |
| 9. | 5V-0770 | [2] | BOLT-CARRIAGE (1/4-20X0.74-IN) | |
| 10. | 7M-7219 | [1] | BEARING-THRUST | |
| 11. | 7V-5191 | [2] | SPACER (28X10X7.1-MM THK) | |
| 12. | 8L-8413 | [2] | STRAP-CABLE (WHITE) | |
| 13. | 8S-7803 | [4] | RING-RETAINING | |
| 14. | 8Y-6041 | [1] | ARM AS | |
| 15. | 8Y-6045 | [1] | CAM | |
| 16. | 8Y-6046 | [1] | PIN | |
| 17. | 8Y-6047 | [2] | PIN | |
| 18. | 8Y-6060 | [2] | ROLLER | |
| 19. | 8Y-6062 | [1] | LINK-ACTUATOR | |
| 20. | 8Y-6063 | [1] | LINK-ACTUATOR | |
| 21. | 8Y-6064 | [2] | ROLLER-SLIDER | |
| 22. | 8Y-6066 | [1] | SPRING | |
| 23. | 8Y-6067 | [1] | SPACER (10.54-MM THK) | |
| 24. | 8Y-6068 | [1] | NUT (3/8X16-THD) | |
| 25. | 8Y-6069 | [1] | ADJUSTER AS | |
| 26. | 9X-8918 | [3] | SCREW-FLAT HEAD (8-32X0.5-IN) | |
| 27. | 095-0878 | [1] | PIN-SPRING | |
| 28. | 131-4242 | [1] | BOLT (3/8-16X5.18-IN) | |
| 29. | 131-5167 | [1] | KNOB AS-ADJUSTMENT (SEAT SUSPENSION) | |
| 30. | 161-5967 | [1] | SHAFT | |
| 31. | 174-2237 | [1] | FRAME AS-SUSPENSION | |
| 32. | JZ | [1] | KNOB-HEIGHT (SEAT SUSPENSION) | |
| 33. | JZ | [1] | KNOB-HEIGHT (SEAT SUSPENSION) | |
| 34. | LZ | [2] | SPRING | |
| 35. | LZ | [2] | BUSHING | |
| 36. | VZ | [2] | SPRING | |
| 37. | VZ | [2] | SPACER | |
| 38. | VZ | [2] | BUSHING-GUIDE | |
| 39. | VZ | [2] | ROD | |
| 40. | PZ | [1] | TAPE-INDICATOR | |
| 41. | PZ | [1] | GUIDE | |
| 42. | SZ | [1] | PIN | |
| 43. | SZ | [1] | FOLLOWER-CAM | |
| 44. | TZ | [1] | PIN | |
| 45. | TZ | [1] | FOLLOWER-CAM | |
| 46. | UZ | [2] | ROLLER AS | |
| 47. | UZ | [1] | ROLLER AS | |
| 48. | QZ | [3] | BUMPER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5945 J | [1] | KIT-SUSPENSION KNOB (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| 8Y-6859 L | [1] | KIT-SPRING (SUSPENSION SEAT) | ||
| 8Y-6860 V | [1] | KIT-SPRING (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| 100-3224 P | [1] | KIT-INDICATOR (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| 100-5179 Q | [1] | KIT-BUMPER (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| 108-4086 S | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| 108-4087 T | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| 108-4103 U | [1] | KIT-BEARING (SUSPENSION SEAT) | ||
| J | KIT MARKED J INCLUDES PART(S) MARKED J | |||
| L | KIT MARKED L INCLUDES PARTS MARKED L AND RETAINING RING | |||
| P | KIT MARKED P INCLUDES PARTS MARKED P AND CABLE STRAP | |||
| Q | KIT MARKED Q INCLUDES PART(S) MARKED Q | |||
| S | KIT MARKED S INCLUDES PART(S) MARKED S | |||
| T | KIT MARKED T INCLUDES PART(S) MARKED T | |||
| U | KIT MARKED U INCLUDES PART(S) MARKED U | |||
| V | KIT MARKED V INCLUDES PART(S) MARKED V | |||
| Z | NOT SERVICED SEPARATELY | |||
#SEBP41951144
214-1760: INSTALLATION GP-RADIO
214-1760 INSTALLATION GP-RADIO
S/N J8B1-UP
PART OF 213-1100, 286-9188, 295-0710 CAB AR
Type 1
ALSO AN ATTACHMENT
S/N J8B1-UP
PART OF 213-1100, 286-9188, 295-0710 CAB AR
Type 1
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-4356 | [4] | WASHER-HARD (17.5X30X6-MM THK) | |
| 2. | 4N-9915 | [4] | GROMMET AS | |
| 3. | 6V-7646 | [4] | WASHER-HARD (7.2X25X2-MM THK) | |
| 4. | 6Y-7385 | [1] | BRACKET | |
| 5. | 8E-1118 | [1] | ANTENNA AS | |
| 6. | 8K-1433 | [1] | GROMMET | |
| 7. | 9U-8263 | [1] | COVER | |
| 8. | 9U-8746 | [1] | CABLE AS-COAXIAL | |
| 9. | 168-8772 | [2] | SPEAKER AS-RADIO | |
| 10. | 108-3138 | [1] | BRACKET AS | |
| 11. | 217-8433 | [1] | FILM-NOTICE (RADIO) | |
| 12. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 13. | 8T-4171 M | [1] | BOLT (M6X1X12-MM) | |
| 14. | 9X-1046 M | [8] | SCREW (M4X0.7X18-MM) | |
| 15. | 9X-8256 | [1] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP41951145
214-1760: INSTALLATION GP-RADIO
214-1760 INSTALLATION GP-RADIO
S/N J8B1-UP
PART OF 213-1100, 286-9188, 295-0710 CAB AR
Type 2
ALSO AN ATTACHMENT
S/N J8B1-UP
PART OF 213-1100, 286-9188, 295-0710 CAB AR
Type 2
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8E-1118 | [1] | ANTENNA AS | |
| 2. | 9U-8263 | [1] | COVER | |
| 3. | 9U-8746 | [1] | CABLE AS-COAXIAL | |
| 4. | 168-8772 | [2] | SPEAKER AS-RADIO | |
| 5. | 363-2235 C | [1] | BRACKET | |
| 6. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 7. | 5P-4115 C | [4] | WASHER-HARD (7.2X19X2-MM THK) | |
| 8. | 9X-1046 M | [8] | SCREW (M4X0.7X18-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP41951146
339-8555: KIT-AIR CONDITIONER
339-8555 KIT-AIR CONDITIONER
S/N J8B1-1882
FIELD REPLACEMENT FOR @@@@@205-3645@@@@@
FOR USE WITH REHS4363
FIELD INSTALLATION
S/N J8B1-1882
FIELD REPLACEMENT FOR @@@@@205-3645@@@@@
FOR USE WITH REHS4363
FIELD INSTALLATION
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2V-9121 H | [2] | FITTING | ||
| 3E-7404 | [4] | CLAMP-HOSE | ||
| 298-2660 Y | [1] | HEATER & AIR CONDITIONER GP | ||
| -OR- | ||||
| 418-6835 Y | [1] | HEATER & AIR CONDITIONER GP | ||
| 308-0855 | [1] | FILTER GP-CAB AIR | ||
| 151-8366 | [1] | VALVE-DUST (AIR CLEANER) | ||
| 231-0167 | [1] | FILTER ELEMENT AS-AIR (PRIMARY) | ||
| -OR- | ||||
| 326-7963 | [1] | FILTER ELEMENT-CAB AIR (ULTRA HIGH EFFICIENCY, CARBON) | ||
| 310-2181 | [1] | PLATE AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 310-2182 | [1] | DOOR AS-ACCESS | ||
| 8T-3490 M | [6] | NUT-WELD (M10X1.5-THD) | ||
| 119-5916 | [1] | CLIP | ||
| 326-0309 H | [2] | ELBOW | ||
| 326-0310 H | [2] | NUT (13/16-18-THD) | ||
| 326-0311 H | [2] | SLEEVE | ||
| 9D-3767 | [1] | PLUG-BUTTON | ||
| 9R-2821 M | [1] | BOSS (M10X1.5X15-MM) | ||
| 391-4209 E | HOSE (97-CM) | |||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | ||
| 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | ||
| 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 248-2930 | [1] | GASKET | ||
| 248-2929 | [1] | GASKET | ||
| 1U-9763 | [3] | OIL-VACUUM PUMP | ||
| 452-7318 | [1] | BRACKET AS | ||
| 444-3513 | [1] | HOSE AS | ||
| 458-2087 | [1] | HOSE AS | ||
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 257-3226 | [1] | DRYER AS-REFRIGERANT (IN-LINE) | ||
| 7X-2049 | [1] | ORIFICE AS-AIR CONDITIONER | ||
| 178-3336 M | [2] | NUT-HEX FLANGE (M8X1.25-THD) | ||
| 9X-7383 | [1] | SEAL-O-RING | ||
| 9X-7381 | [1] | SEAL-O-RING | ||
| 9X-7380 | [1] | SEAL-O-RING | ||
| E | ORDER BY THE CENTIMETER | |||
| H | PARTS MARKED H FOR USE WITH 298-2660 HEATER & AIR CONDITIONER GP | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41951147
339-8556: KIT-AIR CONDITIONER
339-8556 KIT-AIR CONDITIONER
S/N J8B1-1882
FIELD REPLACEMENT FOR @@@@@205-3645@@@@@
FOR USE WITH REHS4363
FIELD INSTALLATION
S/N J8B1-1882
FIELD REPLACEMENT FOR @@@@@205-3645@@@@@
FOR USE WITH REHS4363
FIELD INSTALLATION
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2V-9121 H | [2] | FITTING | ||
| 3E-7404 | [5] | CLAMP-HOSE | ||
| 067-3676 | [1] | REDUCER | ||
| 298-2654 | [1] | ELBOW-REDUCER | ||
| 298-2660 Y | [1] | HEATER & AIR CONDITIONER GP | ||
| -OR- | ||||
| 418-6835 Y | [1] | HEATER & AIR CONDITIONER GP | ||
| 308-0855 | [1] | FILTER GP-CAB AIR | ||
| 151-8366 | [1] | VALVE-DUST (AIR CLEANER) | ||
| 231-0167 | [1] | FILTER ELEMENT AS-AIR (PRIMARY) | ||
| -OR- | ||||
| 326-7963 | [1] | FILTER ELEMENT-CAB AIR (ULTRA HIGH EFFICIENCY, CARBON) | ||
| 309-6514 | [1] | BRACKET AS | ||
| 4M-6953 | [2] | WASHER-HARD (24X38X3.5-MM THK) | ||
| 7T-1099 | [1] | LINK | ||
| 309-6515 | [1] | BRACKET AS | ||
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 309-6516 Y | [1] | HARNESS AS-HEATER & AIR COND | ||
| 310-2181 | [1] | PLATE AS | ||
| (EACH INCLUDES) | ||||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 310-2182 | [1] | DOOR AS-ACCESS | ||
| 8T-3490 M | [6] | NUT-WELD (M10X1.5-THD) | ||
| 316-1161 | [1] | TUBE | ||
| 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | ||
| 119-5916 | [1] | CLIP | ||
| 326-0309 H | [2] | ELBOW | ||
| 326-0310 H | [2] | NUT (13/16-18-THD) | ||
| 326-0311 H | [2] | SLEEVE | ||
| 5P-0599 | [1] | CLAMP-BAND | ||
| 5P-1717 | [2] | CLAMP-HOSE | ||
| 8T-4138 M | [4] | BOLT (M6X1X20-MM) | ||
| 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | ||
| 9G-1307 | [1] | GROMMET | ||
| 9R-2821 M | [1] | BOSS (M10X1.5X15-MM) | ||
| 391-4209 E | HOSE (97-CM) | |||
| 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | ||
| 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | ||
| 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 7K-1181 | [4] | STRAP-CABLE | ||
| 248-2930 | [1] | GASKET | ||
| 248-2929 | [1] | GASKET | ||
| 1U-9763 | [3] | OIL-VACUUM PUMP | ||
| 444-3513 | [1] | HOSE AS | ||
| 458-2087 | [1] | HOSE AS | ||
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 257-3226 | [1] | DRYER AS-REFRIGERANT (IN-LINE) | ||
| 7X-2049 | [1] | ORIFICE AS-AIR CONDITIONER | ||
| 178-3336 M | [2] | NUT-HEX FLANGE (M8X1.25-THD) | ||
| 9X-7383 | [1] | SEAL-O-RING | ||
| 9X-7381 | [1] | SEAL-O-RING | ||
| 9X-7380 | [1] | SEAL-O-RING | ||
| E | ORDER BY THE CENTIMETER | |||
| H | PARTS MARKED H FOR USE WITH 298-2660 HEATER & AIR CONDITIONER GP | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41951148
339-8557: KIT-AIR CONDITIONER
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 308-0857 Y | [1] | FILTER GP-CAB AIR (ADVANCED EFFICIENCY) | ||
| 418-6835 Y | [1] | HEATER & AIR CONDITIONER GP | ||
| 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | ||
| 298-2651 | [1] | BRACKET AS | ||
| 171-2419 M | [1] | STUD-WELD (M10X1.5X35-MM) | ||
| 8C-8778 M | [1] | STUD-WELD (M8X1.25X25-MM) | ||
| 140-3943 M | [2] | STUD | ||
| 298-2657 | [1] | BRACKET AS | ||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 298-2658 | [1] | BRACKET AS | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 308-0852 | [1] | BRACKET AS | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 235-0320 | [1] | CAP AS-AIR CLEANER (PRECLEANER) | ||
| 3E-7404 | [1] | CLAMP-HOSE | ||
| 3E-7404 | [2] | CLAMP-HOSE | ||
| 298-2656 | [1] | COVER AS | ||
| 257-3226 | [1] | DRYER AS-REFRIGERANT (IN-LINE) | ||
| 7X-2049 | [1] | ORIFICE AS-AIR CONDITIONER | ||
| 154-7105 | [1] | ELBOW | ||
| 326-0309 | [2] | ELBOW | ||
| 2V-9121 | [2] | FITTING | ||
| 248-2929 | [1] | GASKET | ||
| 248-2930 | [1] | GASKET | ||
| 445-1028 | [1] | HOSE AS | ||
| 445-1029 | [1] | HOSE AS | ||
| 326-0310 | [2] | NUT (13/16-18-THD) | ||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 5C-7261 M | [1] | NUT (M8X1.25-THD) | ||
| 8T-4133 M | [2] | NUT (M10X1.5-THD) | ||
| 178-3336 M | [2] | NUT-HEX FLANGE (M8X1.25-THD) | ||
| 9D-3767 | [1] | PLUG-BUTTON | ||
| 227-5334 | [1] | SEAL | ||
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 9X-7380 | [1] | SEAL-O-RING | ||
| 9X-7381 | [1] | SEAL-O-RING | ||
| 9X-7383 | [1] | SEAL-O-RING | ||
| 326-0311 | [2] | SLEEVE | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 7K-1181 | [1] | STRAP-CABLE | ||
| 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | ||
| 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP41951149
339-8558: KIT-AIR CONDITIONER
339-8558 KIT-AIR CONDITIONER
S/N J8B1-1882
FIELD REPLACEMENT FOR @@@@@205-3645@@@@@
FOR USE WITH REHS4362
FIELD INSTALLATION
S/N J8B1-1882
FIELD REPLACEMENT FOR @@@@@205-3645@@@@@
FOR USE WITH REHS4362
FIELD INSTALLATION
For full view, you need register
Parts for your D8T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 308-0857 Y | [1] | FILTER GP-CAB AIR (ADVANCED EFFICIENCY) | ||
| 418-6835 Y | [1] | HEATER & AIR CONDITIONER GP | ||
| 8T-4138 M | [4] | BOLT (M6X1X20-MM) | ||
| 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | ||
| 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | ||
| 298-2651 | [1] | BRACKET AS | ||
| 171-2419 M | [1] | STUD-WELD (M10X1.5X35-MM) | ||
| 8C-8778 M | [1] | STUD-WELD (M8X1.25X25-MM) | ||
| 140-3943 M | STUD | |||
| 298-2658 | [1] | BRACKET AS | ||
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 308-0852 | [1] | BRACKET AS | ||
| 8T-3612 M | [2] | NUT-WELD (M8X1.25-THD) | ||
| 309-6517 | [1] | BRACKET AS | ||
| 7T-1099 | [2] | LINK | ||
| 326-6601 | [1] | BRACKET AS | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 5P-0599 | [1] | CLAMP-BAND | ||
| 3E-7404 | [3] | CLAMP-HOSE | ||
| 298-2656 | [1] | COVER AS | ||
| 257-3226 | [1] | DRYER AS-REFRIGERANT (IN-LINE) | ||
| 7X-2049 | [1] | ORIFICE AS-AIR CONDITIONER | ||
| 154-7105 | [1] | ELBOW | ||
| 326-0309 | [2] | ELBOW | ||
| 2V-9121 | [2] | FITTING | ||
| 248-2929 | [1] | GASKET | ||
| 248-2930 | [1] | GASKET | ||
| 9G-1307 | [1] | GROMMET | ||
| 283-0775 | [1] | HOSE | ||
| 445-1028 | [1] | HOSE AS | ||
| 445-1029 | [1] | HOSE AS | ||
| 326-0310 | [2] | NUT (13/16-18-THD) | ||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 5C-7261 M | [1] | NUT (M8X1.25-THD) | ||
| 8T-4133 M | [2] | NUT (M10X1.5-THD) | ||
| 178-3336 M | [2] | NUT-HEX FLANGE (M8X1.25-THD) | ||
| 1U-9763 | [3] | OIL-VACUUM PUMP | ||
| 227-5334 | [1] | SEAL | ||
| 327-0282 | [1] | SEAL-INTEGRAL (1/2-IN) | ||
| 327-0283 | [1] | SEAL-INTEGRAL (3/4-IN) | ||
| 9X-7380 | [1] | SEAL-O-RING | ||
| 9X-7381 | [1] | SEAL-O-RING | ||
| 9X-7383 | [1] | SEAL-O-RING | ||
| 326-0311 | [2] | SLEEVE | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 7K-1181 | [3] | STRAP-CABLE | ||
| 117-8929 | [4] | WASHER (6.6X22X2-MM THK) | ||
| 9X-6165 | [2] | WASHER (6.5X22X2.5-MM THK) | ||
| 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4224 | [3] | WASHER-HARD (8.8X16X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
