AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

148-4626 DRIVE GP-SWING -WITHOUT MOTOR, REAR S/N SBE192-UP; JCM175-UP PART OF 227-6130 DRIVE GP-SWING 385C


HYDRAULIC SYSTEM
DRIVE GP
FILTER GP

EXCAVATOR 385C EXCAVATOR JCM
 385C L Excavator JCM00001-UP (MACHINE) POWERED BY C-18 Engine SEBP4203 385C JCM   (2003)

HYDRAULIC SYSTEM

DRIVE GP
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
DRIVE GP-SWING
148-4598 DRIVE GP-SWING
DRIVE GP-SWING
148-4598 DRIVE GP-SWING
DRIVE GP-SWING
148-4626 DRIVE GP-SWING
DRIVE GP-SWING
148-4626 DRIVE GP-SWING
DRIVE GP-SWING
227-6130 DRIVE GP-SWING
DRIVE GP-SWING
227-6131 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
148-4627 FASTENER GP-SWING & FINAL DR
 

#SEBP42030760
 

148-4626: DRIVE GP-SWING

148-4626 DRIVE GP-SWING -WITHOUT MOTOR, REAR
S/N SBE192-UP; JCM175-UP
PART OF 227-6130 DRIVE GP-SWING
i03545101 SEBP4203
1484626 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4602 [4] GEAR-PLANETARY (24-TEETH)  
2. 094-1528 [8] WASHER (53X84X1-MM THK)  
3. 148-4608 [4] SHAFT-PLANETARY  
4. 191-2525 [1] COVER-HOUSING  
5. 148-4600 [1] GEAR-SUN (17-TEETH)  
6. 7I-7684 M [2] SPACER (50X79.6X6-MM THK)  
7. 199-4672 [1] CONNECTOR AS  
  6V-9746 [1] SEAL-O-RING  
8. 199-4674 [1] PIPE AS  
9. 096-1441 [1] RING-RETAINING  
10. 093-1730 [1] RING-RETAINING  
11. 148-4601 [1] GEAR-SUN (17-TEETH)  
12. 191-2511 [1] CARRIER-PLANETARY  
13. 114-1322 [1] RING-RETAINING  
14. 148-4607 [1] CARRIER-PLANETARY  
15. 148-4604 [1] GEAR-RING (67-TEETH)  
18. 110-7149 [1] RING-RETAINING  
19. 9U-8693 [1] BEARING-ROLLER  
20. 7I-7619 [1] BEARING-ROLLER  
21. 128-9170 [2] SEAL-LIP TYPE  
22. 199-4496 [1] SHAFT-PINION  
23. 7I-7611 [1] CAGE  
24. 453-3447 M [10] BOLT (M12X1.75X40-MM)  
25. 451-2182 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 5M-4454 [1] SEAL-O-RING  
27. 191-2524 [1] HOUSING  
28. 6V-7238 [1] VALVE-SHUTOFF  
29. 3K-0360 [1] SEAL-O-RING  
30. 148-4611 [8] WASHER (71.3X112X1-MM THK)  
31. 191-2514 [8] BEARING AS  
32. 148-4609 [4] SHAFT-PLANETARY  
33. 148-4603 [4] GEAR-PLANETARY (24-TEETH)  
34. 099-5194 [8] PIN-SPRING  
35. 453-4169 M [24] BOLT (M16X2X200-MM)  
36. 451-2175 [24] WASHER-HARD (17.5X30X3.5-MM THK)  
37. 191-2513 [4] BEARING AS-ROLLER  
38. 227-6221 C [1] BREATHER AS (SWING DRIVE)  
  4H-6112 [1] BREATHER (SWING DRIVE)  
  227-6215 [1] BOSS (1/4-18-THD)  
  267-6785 PIPE  
39. 171-9413 [1] SPACER (140.5X160X103.2-MM THK)  
40. 199-4681 [1] GAUGE-OIL LEVEL (SWING DRIVE)  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP42030761
 

227-6130: DRIVE GP-SWING

227-6130 DRIVE GP-SWING -WITH MOTOR, REAR
S/N SBE1-UP; JCM1-UP
PART OF 227-6129 POWER TRAIN AR
i02121025 SEBP4203
2276130 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4626 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, REAR)  
2. 234-4534 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42030762
 

227-6131: DRIVE GP-SWING

227-6131 DRIVE GP-SWING -WITH MOTOR, FRONT
S/N SBE1-UP; JCM1-UP
PART OF 227-6129 POWER TRAIN AR
i02124719 SEBP4203
2276131 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 148-4598 Y [1] DRIVE GP-SWING (WITHOUT MOTOR, FRONT)  
2. 234-4536 Y [1] MOTOR & MTG GP-SWING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42030763
 

148-4627: FASTENER GP-SWING & FINAL DR

148-4627 FASTENER GP-SWING & FINAL DR
S/N SBE1-UP; JCM1-UP
PART OF 227-6129 POWER TRAIN AR
i01525436 SEBP4203
1484627 FASTENER GP-SWING & FINAL DR Parts scheme 1484627 FASTENER GP-SWING & FINAL DR Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0283 M [48] BOLT (M30X3.5X110-MM)  
2. 9X-8399 [48] WASHER (33X56X6-MM THK)  
3. 173-9779 M [46] BOLT (M24X3X80-MM)  
4. 096-4755 [2] PIN  
6. 5P-0767 E HOSE (140-CM)  
6A. 5P-0767 E HOSE (70-CM)  
7. 2B-7561 [4] CORK  
8. 5D-1026 [2] CLAMP-BAND  
10. 114-1374 [1] SUPPORT  
11. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
12. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
13. 353-0518 [46] SPACER (24.5X44X14-MM THK)  
14. 199-4677 [1] SUPPORT  
15. 122-8705 M [1] U-BOLT (M10X1.5-MM THD)  
16. 096-4883 M [2] LOCKNUT (M10X1.5-THD)  
17. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
18. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 9V-5382 [1] GROMMET  
   
  1U-8846 BF SEALANT-GASKET  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP42030764
 

228-8234: FILTER & LINES GP-HYDRAULIC

228-8234 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N SBE1-UP; JCM1-UP
AN ATTACHMENT
i02595317 SEBP4203
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  239-1825 Y [1] FILTER & LINES GP-HYDRAULIC  
    -OR-
  260-8202 Y [1] FILTER & LINES GP-HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42030765
 

239-1825: FILTER & LINES GP-HYDRAULIC

239-1825 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N SBE1-UP; JCM1-UP
PART OF 228-8234 FILTER & LINES GP-HYDRAULIC
AN ATTACHMENT
i02109239 SEBP4203
2391825 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6849 Y [1] VALVE GP-CHECK (PILOT)  
2. 7K-1181 [2] STRAP-CABLE  
3. 191-5650 Y [1] FILTER GP-OIL (HYDRAULIC)(FINE FILTRATION)  
4. 202-3862 I [1] HOSE AS  
5. 212-5338 I [1] HOSE AS  
6. 239-1880 [1] BRACKET AS  
7. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
8. 150-4043 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-9873 [1] CONNECTOR  
9. 7C-4354 [1] CLIP  
10. 6V-8398 [1] SEAL-O-RING  
11. 8T-4121 [5] WASHER-HARD (11X21X2.5-MM THK)  
12. 8T-4133 M [4] NUT (M10X1.5-THD)  
13. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
14. 8T-4192 M [2] BOLT (M12X1.75X25-MM)  
15. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
16. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42030766
 

260-8202: FILTER & LINES GP-HYDRAULIC

260-8202 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N SBE1-UP; JCM1-UP
PART OF 228-8234 FILTER & LINES GP-HYDRAULIC
Type 1
AN ATTACHMENT
i02608254 SEBP4203
2608202 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [3] STRAP-CABLE  
2. 201-1413 [1] SUPPORT  
3. 201-1414 [1] SUPPORT AS  
4. 250-0729 Y [1] FILTER GP-OIL (HYDRAULIC)(FINE FILTRATION)  
5. 260-8248 I [1] HOSE AS  
6. 260-8251 I [1] HOSE AS  
7. 148-8365 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
8. 148-8372 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8721 [1] ELBOW  
9. 148-8418 [1] REDUCER AS  
  6V-8398 [1] SEAL-O-RING  
  6V-8942 [1] REDUCER-O-RING  
10. 148-8442 [1] TEE AS  
  6V-9746 [2] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  8T-1685 [1] TEE  
11. 1S-0994 [3] CLIP (LOOP)  
12. 3J-1907 [2] SEAL-O-RING  
13. 5I-3978 [2] CLIP  
14. 6V-0852 [1] CAP-DUST  
15. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
16. 6V-8076 [1] ELBOW  
17. 6V-8556 [1] NUT (1-3/16-12-THD)  
18. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
19. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
21. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
22. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
23. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42030767
 

260-8202: FILTER & LINES GP-HYDRAULIC

260-8202 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N SBE1-UP; JCM1-UP
PART OF 228-8234 FILTER & LINES GP-HYDRAULIC
Type 2
AN ATTACHMENT
i02608262 SEBP4203
2608202 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [3] STRAP-CABLE  
2. 201-1413 [1] SUPPORT  
3. 201-1414 [1] SUPPORT AS  
4. 250-0729 Y [1] FILTER GP-OIL (HYDRAULIC)(FINE FILTRATION)  
5. 275-1734 CI [1] HOSE AS  
6. 260-8251 I [1] HOSE AS  
7. 148-8365 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
8. 148-8372 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8721 [1] ELBOW  
9. 148-8417 C [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8941 [1] REDUCER  
10. 164-5574 C [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8784 [1] TEE-FACE SEAL  
  6V-9746 [2] SEAL-O-RING  
11. 1S-0994 [3] CLIP (LOOP)  
12. 3J-1907 [2] SEAL-O-RING  
13. 5I-3978 [2] CLIP  
14. 6V-0852 [1] CAP-DUST  
15. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
16. 6V-8076 [1] ELBOW  
17. 6V-8556 [1] NUT (1-3/16-12-THD)  
18. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
19. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
21. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
22. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
23. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42030768
 

260-8202: FILTER & LINES GP-HYDRAULIC

260-8202 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N SBE1-UP; JCM1-UP
PART OF 228-8234 FILTER & LINES GP-HYDRAULIC
Type 3
AN ATTACHMENT
i03126064 SEBP4203
2608202 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [3] STRAP-CABLE  
2. 307-5110 C [1] SUPPORT  
3. 201-1414 [1] SUPPORT AS  
4. 250-0729 Y [1] FILTER GP-OIL (HYDRAULIC)(FINE FILTRATION)  
5. 275-1734 I [1] HOSE AS  
6. 260-8251 I [1] HOSE AS  
7. 148-8365 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
8. 148-8372 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8721 [1] ELBOW  
9. 148-8417 [1] REDUCER AS  
  6V-8397 [1] SEAL-O-RING  
  6V-8941 [1] REDUCER  
10. 164-5574 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8784 [1] TEE-FACE SEAL  
  6V-9746 [2] SEAL-O-RING  
11. 1S-0994 [3] CLIP (LOOP)  
12. 3J-1907 [2] SEAL-O-RING  
13. 5I-3978 [2] CLIP  
14. 6V-0852 [1] CAP-DUST  
15. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
16. 6V-8076 [1] ELBOW  
17. 6V-8556 [1] NUT (1-3/16-12-THD)  
18. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
19. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
21. 8T-4139 CM [8] BOLT (M12X1.75X30-MM)  
22. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
23. 8T-4223 C [8] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42030769
 

260-8202: FILTER & LINES GP-HYDRAULIC

260-8202 FILTER & LINES GP-HYDRAULIC -FINE FILTRATION
S/N SBE1-UP; JCM1-UP
PART OF 228-8234 FILTER & LINES GP-HYDRAULIC
Type 4
AN ATTACHMENT
i03390040 SEBP4203
2608202 FILTER & LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [3] STRAP-CABLE  
2. 307-5110 [1] SUPPORT  
3. 333-7152 C [1] SUPPORT AS  
4. 250-0729 Y [1] FILTER GP-OIL (HYDRAULIC)(FINE FILTRATION)  
5. 275-1734 I [1] HOSE AS  
6. 260-8251 I [1] HOSE AS  
7. 148-8365 [2] ELBOW AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  8T-6876 [1] ELBOW  
8. 148-8372 [1] ELBOW AS  
  2M-9780 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8721 [1] ELBOW  
9. 148-8418 C [1] REDUCER AS  
  6V-8398 [1] SEAL-O-RING  
  6V-8942 [1] REDUCER-O-RING  
10. 164-5574 [1] TEE AS  
  3D-2824 [1] SEAL-O-RING  
  6V-8784 [1] TEE-FACE SEAL  
  6V-9746 [2] SEAL-O-RING  
11. 1S-0994 [3] CLIP (LOOP)  
12. 3J-1907 C [1] SEAL-O-RING  
13. 5I-3978 [2] CLIP  
14. 6V-0852 [1] CAP-DUST  
15. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
16. 241-6215 C [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-8076 [1] ELBOW  
17. 6V-8556 [1] NUT (1-3/16-12-THD)  
18. 7X-2537 M [4] BOLT (M8X1.25X35-MM)  
19. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
21. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
22. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
23. 8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Swing Drive Oil Level - Check
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Swing Drive Oil Sample - Obtain
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Swing Drive Oil - Change
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit
Specifications
Swing Drive
385C Excavator and 385C Front Shovel Machine System Specifications
Fasteners - Swing Drive and Final Drive
385C Excavator and 385C Front Shovel Machine System Specifications
Swing Drive
385C Excavator and 385C Front Shovel Machine System Specifications
Systems Operation
Swing Drive
385C Excavator Hydraulic System
Testing and Adjusting
Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
385C Excavator Hydraulic System
Disassembly and Assembly
Pump (Hydraulic Oil Cooler and Fan Drive) - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Drive - Remove
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Drive - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Drive - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Drive - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Remove
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Procedure for the Measurement of the Movement of the Swing Bearing {5459, 7063}
2008/09/29
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}
An Improved Bolt Tightening Procedure for the Critical Joints Is Now Used on All Excavators {4050, 4164, 5459, 7063}

Caterpillar Parts SIS Catalog 385C :

DRIVE GP-SWING
148-4626 DRIVE GP-SWING
DRIVE GP-SWING
148-4598 DRIVE GP-SWING
DRIVE GP-SWING
148-4598 DRIVE GP-SWING
DRIVE GP-PUMP
6I-3638 DRIVE GP-PUMP
CYLINDER GP-STICK
315-3375 CYLINDER GP-STICK
CYLINDER GP-STICK
315-3375 CYLINDER GP-STICK
CYLINDER GP-HYDRAULIC
259-0871 CYLINDER GP-HYDRAULIC
CYLINDER GP-HYDRAULIC
155-9071 CYLINDER GP-HYDRAULIC
DRIVE GP-SWING
227-6130 DRIVE GP-SWING
DRIVE GP-SWING
227-6131 DRIVE GP-SWING
FASTENER GP-SWING & FINAL DR
148-4627 FASTENER GP-SWING & FINAL DR
228-8234 FILTER & LINES GP-HYDRAULIC
FILTER & LINES GP-HYDRAULIC
239-1825 FILTER & LINES GP-HYDRAULIC
FILTER & LINES GP-HYDRAULIC
260-8202 FILTER & LINES GP-HYDRAULIC
FILTER & LINES GP-HYDRAULIC
260-8202 FILTER & LINES GP-HYDRAULIC
FILTER & LINES GP-HYDRAULIC
260-8202 FILTER & LINES GP-HYDRAULIC

Truck sale:

CATERPILLAR 385 C 2010
 
CATERPILLAR 385 C 2010
- TRACK EXCAVATORS
WAGNER ASIA EQUIPMENT LLC
Bayangol district, 4th Khoroo, Baruun Uildver-133 Wagner Asia Bldg, P.O.Box-26
2015 CAT 385C
Call 
2015 CAT 385C

Shangjia Commerce and Trade Co. Ltd.
2005 CAT 385C
Call 
2005 CAT 385C

LIGRO TRADING BV
Panheel, Panheel, The Netherlands
2008 CAT 385C
USD $145,000 
2008 CAT 385C

Bluesky International FZC
2010 CAT 385C
Call 
2010 CAT 385C

Best Machinery Holland BV
Rotterdam, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.