AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

295-9446 MOTOR GP-SWING -REAR S/N KBC1-UP FIELD REPLACEMENT FOR @@@@@234-4535@@@@@ 385C EXCAVATOR


HYDRAULIC SYSTEM
MOTOR GP
MOUNTING GP
VALVE GP-CONTROL
PUMP GP

EXCAVATOR 385C EXCAVATOR KBC
 385C Excavator KBC00001-UP (MACHINE) POWERED BY C18 Engine SEBP4206 385C KBC   (2003)

HYDRAULIC SYSTEM

MOTOR GP
MOTOR GP-SWING
234-4537 MOTOR GP-SWING
MOTOR GP-SWING
234-4540 MOTOR GP-SWING
MOTOR GP-SWING
295-9446 MOTOR GP-SWING
MOTOR GP-SWING
295-9447 MOTOR GP-SWING
MOTOR GP-TRAVEL
209-5895 MOTOR GP-TRAVEL
ROTATING GP-MOTOR
185-0266 ROTATING GP-MOTOR
 

#SEBP42060670
 

295-9446: MOTOR GP-SWING

295-9446 MOTOR GP-SWING -REAR
S/N KBC1-UP
FIELD REPLACEMENT FOR @@@@@234-4535@@@@@
i02889167 SEBP4206
2959446 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1574 [2] SEAL-O-RING  
2. 137-3713 Y [1] VALVE GP-SOLENOID (SWING PARKING BRAKE)  
3. 8T-6974 M [3] BOLT (M6X1X80-MM)  
4. 8T-6759 [1] PLUG-PIPE  
5. 295-9421 Y [1] MOTOR GP-PISTON (SWING)  
6. 177-2549 Y [2] VALVE GP-RELIEF (SWING)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060671
 

295-9447: MOTOR GP-SWING

295-9447 MOTOR GP-SWING -FRONT
S/N KBC1-UP
FIELD REPLACEMENT FOR @@@@@234-4537@@@@@
i02888873 SEBP4206
2959447 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-1573 [2] SEAL-O-RING  
2. 137-3716 [1] BODY  
3. 7X-2533 M [3] BOLT (M6X1X35-MM)  
4. 8T-6759 [1] PLUG-PIPE  
5. 295-9421 Y [1] MOTOR GP-PISTON (SWING)  
6. 177-2549 Y [2] VALVE GP-RELIEF (SWING)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060672
 

209-5895: MOTOR GP-TRAVEL

209-5895 MOTOR GP-TRAVEL
S/N KBC1-UP
PART OF 155-9198 MOTOR & MTG GP-TRAVEL
i01636286 SEBP4206
2095895 MOTOR GP-TRAVEL Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-5658 [1] PLATE  
2. 191-5659 [1] PLATE  
3. 295-9690 [1] PISTON AS  
4. 191-5675 [1] BARREL AS  
5. 191-5671 [16] SPRING  
6. 191-5670 [1] PISTON-BRAKE  
7. 196-6103 J [1] SEAL-O-RING  
8. 095-0965 [2] PLUG  
9. 4I-1022 [2] ORIFICE  
10. 3J-1907 J [6] SEAL-O-RING  
11. 110-5525 [6] PLUG  
12. 191-5662 [1] VALVE GP-PRESSURE REDUCING (PARKING BRAKE RELEASE)  
13. 191-5663 [1] COVER  
14. 191-5665 [1] BEARING-NEEDLE  
17. 191-5678 [1] RING-RETAINING  
18. 191-5676 [1] HEAD GP-MOTOR  
  5I-4168 [1] PIN  
19. 1R-7037 [1] ORIFICE  
20. 095-1578 J [2] SEAL-O-RING  
21. 196-6102 J [1] SEAL-O-RING  
22. 191-5673 [4] PLATE-FRICTION  
23. 191-5672 [5] PLATE-SEPARATOR  
24. 191-5657 [9] SPRING  
25. 7I-8084 [12] PLUG  
26. 191-5677 [1] PISTON AS  
27. 8T-9044 [1] RING-RETAINING  
28. 095-0930 [1] RING-RETAINING (EXTERNAL)  
29. 191-5655 [1] SHAFT  
30. 191-5666 J [1] SEAL-OIL  
31. 191-5664 [1] BEARING-ROLLER  
32. 191-5667 [2] PIVOT  
33. 209-5908 [1] BODY  
34. 191-5656 [1] GUIDE-BALL  
35. 200-3391 [1] SWASHPLATE  
36. 095-1698 [2] SEAL-O-RING  
37. 5I-8770 [2] RING-BACKUP  
38. 191-5654 [2] VALVE GP-RELIEF (LINE)  
39. 4D-3118 [2] PLUG-PIPE  
40. 9S-4188 [2] PLUG  
41. 4K-1388 J [2] SEAL-O-RING  
42. 8T-0348 M [12] BOLT-SOCKET HEAD (M16X2X50-MM)  
43. 5I-8765 [1] STOP  
44. 5H-1472 [1] BALL  
45. 191-5669 [1] SEAT  
46. 4I-7874 [1] SPRING  
47. 191-5668 [1] SPOOL  
48. 095-1582 J [2] SEAL-O-RING  
49. 111-9998 [2] PLUG  
50. 4D-6695 J [1] SEAL-O-RING  
51. 095-1751 J [1] SEAL-O-RING  
52. 6V-8399 J [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  369-9621 J [1] KIT-SEAL (TRAVEL MOTOR)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP42060673
 

197-2172: MOUNTING GP-COUNTERWEIGHT CYL

197-2172 MOUNTING GP-COUNTERWEIGHT CYL
S/N KBC1-UP
PART OF 228-8132 COUNTERWEIGHT AR
AN ATTACHMENT
i01738013 SEBP4206
1972172 MOUNTING GP-COUNTERWEIGHT CYL Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-3924 [2] GUIDE AS  
2. 447-1717 M [4] BOLT (M20X2.5X45-MM)  
3. 451-2176 [4] WASHER-HARD (22X35X3.5-MM THK)  
4. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
5. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 173-8127 [1] PIN AS  
7. 173-8122 [1] BRACKET AS  
8. 451-9261 M [6] BOLT (M30X3.5X100-MM)  
9. 451-2186 M [6] NUT (M30X3.5-THD)  
10. 451-2178 [6] WASHER-HARD (33X56X6-MM THK)  
11. 8T-5412 M [1] BOLT (M12X1.75X140-MM)  
12. 8T-4244 M [2] NUT (M12X1.75-THD)  
13. 173-8130 [1] PIN  
14. 173-8114 [1] BRACKET AS  
15. 5R-5927 [1] WASHER (14X65X6-MM THK)  
16. 135-8575 [1] BOLT AS  
17. 447-1725 M [4] BOLT (M24X3X80-MM)  
18. 451-2177 [8] WASHER-HARD (26X44X4-MM THK)  
19. 451-2185 M [4] NUT (M24X3-THD)  
20. 121-1891 B [2] SHIM (1-MM THK)  
21. 127-6680 B [4] SHIM (0.5-MM THK)  
22. 173-8119 [1] BAND AS  
23. 447-1726 M [4] BOLT (M24X3X70-MM)  
24. 302-9275 [2] SPRING  
25. 173-8113 [2] PLATE  
26. 8T-1159 M [4] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP42060674
 

239-1784: MOUNTING GP-MAIN CONTROL VALVE

239-1784 MOUNTING GP-MAIN CONTROL VALVE
S/N KBC1-UP
PART OF 225-4834 HYDRAULIC AR
i02123141 SEBP4206
2391784 MOUNTING GP-MAIN CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7I-0070 B [12] SHIM (1.6-MM THK)  
2. 7I-0071 B [12] SHIM (3-MM THK)  
3. 7I-0072 B [12] SHIM (5-MM THK)  
4. 7I-0985 [8] RUBBER  
5. 7I-7400 [4] COVER  
6. 7X-2622 [8] WASHER (22X115X10-MM THK)  
7. 7Y-0839 [3] SUPPORT AS  
8. 333-7137 [1] SUPPORT AS  
9. 176-4347 [4] SUPPORT AS  
10. 207-6518 [1] SUPPORT AS  
11. 260-8156 [1] SUPPORT AS  
12. 245-5267 [1] SUPPORT AS  
13. 110-6968 M [4] BOLT (M16X2X280-MM)  
14. 6C-9149 [8] WASHER (22X50X10-MM THK)  
15. 7X-2553 M [1] BOLT (M16X2X40-MM)  
16. 7X-2570 M [4] BOLT (M20X2.5X220-MM)  
17. 9X-8257 [5] WASHER (17.5X30X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP42060675
 

171-0113: PLUG GP-CONTROL VALVE

171-0113 PLUG GP-CONTROL VALVE
S/N KBC1-UP
PART OF 239-1785 LINES GP-PILOT
AN ATTACHMENT
i03589467 SEBP4206
1710113 PLUG GP-CONTROL VALVE Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4K-2039 [1] SEAL-O-RING  
2. 5L-4758 [1] SEAL-O-RING  
3. 4D-2297 [1] SEAL-O-RING  
4. 095-1586 [1] SEAL-O-RING  
 

#SEBP42060676
 

242-6924: PUMP & MTG GP-HYDRAULIC

242-6924 PUMP & MTG GP-HYDRAULIC -SWING, FAN, PILOT
S/N KBC1-221
PART OF 225-4834 HYDRAULIC AR
i02123295 SEBP4206
2426924 PUMP & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9222 Y [1] PUMP GP-GEAR (PILOT)  
2. 170-9918 Y [1] PUMP GP-PISTON (FAN MOTOR)  
3. 259-0784 Y [1] PUMP GP-PISTON (SWING)  
4. 6V-7681 [1] SEAL-O-RING  
5. 7X-2563 M [4] BOLT (M20X2.5X60-MM)  
6. 8T-4123 [4] WASHER (22X35X3.5-MM THK)  
7. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060677
 

242-6924: PUMP & MTG GP-HYDRAULIC

242-6924 PUMP & MTG GP-HYDRAULIC -SWING, FAN, PILOT
S/N KBC222-UP
PART OF 225-4834 HYDRAULIC AR
i03108326 SEBP4206
2426924 PUMP & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-9222 Y [1] PUMP GP-GEAR (PILOT)  
2. 170-9918 Y [1] PUMP GP-PISTON (FAN MOTOR)  
3. 266-7953 CY [1] PUMP GP-PISTON (SWING)  
4. 6V-7681 [1] SEAL-O-RING  
5. 447-1719 M [4] BOLT (M20X2.5X60-MM)  
6. 451-2176 [4] WASHER-HARD (22X35X3.5-MM THK)  
7. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
8. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
9. 8T-4956 M [2] BOLT (M12X1.75X35-MM)  
10. 118-3122 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060678
 

222-8316: PUMP & MTG GP-MAIN HYDRAULIC

222-8316 PUMP & MTG GP-MAIN HYDRAULIC
S/N KBC1-UP
PART OF 225-4834 HYDRAULIC AR
Type 1
i02124342 SEBP4206
2228316 PUMP & MTG GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4332 I [1] HOSE AS  
2. 155-9205 Y [1] PUMP GP-MAIN HYDRAULIC  
3. 196-8173 [1] ELBOW  
4. 222-8317 Y [1] COUPLING GP-PUMP  
5. 233-1152 [1] COVER  
6. 233-1153 [1] CLAMP  
7. 233-1154 [1] PLATE  
8. 233-1155 [1] TUBE AS  
9. 3P-0658 [1] SEAL-O-RING  
10. 6V-5043 [1] SEAL-O-RING  
11. 6V-5049 [1] SEAL-O-RING  
12. 7X-0314 [10] BOLT (7/16-14X3-IN)  
13. 7X-0316 [2] BOLT (7/16-14X3.5-IN)  
14. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
15. 7X-2577 M [4] BOLT (M24X3X90-MM)  
16. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-5360 [12] WASHER (12X22.5X2.5-MM THK)  
21. 6K-8178 [1] CLIP (LOOP)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060679
 

222-8316: PUMP & MTG GP-MAIN HYDRAULIC

222-8316 PUMP & MTG GP-MAIN HYDRAULIC
S/N KBC1-UP
PART OF 225-4834 HYDRAULIC AR
Type 2
i02778947 SEBP4206
2228316 PUMP & MTG GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-4332 I [1] HOSE AS  
2. 155-9205 Y [1] PUMP GP-MAIN HYDRAULIC  
3. 196-8173 [1] ELBOW  
4. 151-6646 CY [1] COUPLING GP-PUMP  
5. 233-1152 [1] COVER  
6. 233-1153 [1] CLAMP  
7. 233-1154 [1] PLATE  
8. 233-1155 [1] TUBE AS  
9. 3P-0658 [1] SEAL-O-RING  
10. 6V-5043 [1] SEAL-O-RING  
11. 6V-5049 [1] SEAL-O-RING  
12. 7X-0314 [10] BOLT (7/16-14X3-IN)  
13. 7X-0316 [2] BOLT (7/16-14X3.5-IN)  
14. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
15. 7X-2577 M [4] BOLT (M24X3X90-MM)  
16. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
17. 8T-4136 M [1] BOLT (M10X1.5X25-MM)  
18. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
19. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
20. 8T-5360 [12] WASHER (12X22.5X2.5-MM THK)  
21. 6K-8178 [1] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
The 247-8978 Piston Motor Gp and the 10R-6276 Remanufactured Piston Motor are Shipped with Plugs in Ports{5058}
The 247-8978 Piston Motor Gp and the 10R-6276 Remanufactured Piston Motor are Shipped with Plugs in Ports{5058}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING MOTOR ON CERTAIN 365CL, 365CL FS, 365CL MH, 365CL OEM, 385B, 385BL, 385B OEM, 5090B, 385C, 385CL, 385C FS, 385CL MH, AND 385C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING MOTOR ON CERTAIN 365CL, 365CL FS, 365CL MH, 365CL OEM, 385B, 385BL, 385B OEM, 5090B, 385C, 385CL, 385C FS, 385CL MH, AND 385C OEM EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Fasteners - Swing Drive and Final Drive
385C Excavator and 385C Front Shovel Machine System Specifications
Travel Motor
385C Excavator and 385C Front Shovel Machine System Specifications
Travel Counterbalance Valve
385C Excavator and 385C Front Shovel Machine System Specifications
Swing Motor
385C Excavator and 385C Front Shovel Machine System Specifications
Swing Motor
385C Excavator and 385C Front Shovel Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING MOTOR ON CERTAIN 365CL, 365CL FS, 365CL MH, 365CL OEM, 385B, 385BL, 385B OEM, 5090B, 385C, 385CL, 385C FS, 385CL MH, AND 385C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING MOTOR ON CERTAIN 365CL, 365CL FS, 365CL MH, 365CL OEM, 385B, 385BL, 385B OEM, 5090B, 385C, 385CL, 385C FS, 385CL MH, AND 385C OEM EXCAVATORS
Service Letter-Asia
Systems Operation
Swing Motor
385C Excavator Hydraulic System
Travel Motor
385C Excavator Hydraulic System
Displacement Change Valve
385C Excavator Hydraulic System
Travel Counterbalance Valve
385C Excavator Hydraulic System
Swing Hydraulic System
385C Excavator Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING MOTOR ON CERTAIN 365CL, 365CL FS, 365CL MH, 365CL OEM, 385B, 385BL, 385B OEM, 5090B, 385C, 385CL, 385C FS, 385CL MH, AND 385C OEM EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SWING MOTOR ON CERTAIN 365CL, 365CL FS, 365CL MH, 365CL OEM, 385B, 385BL, 385B OEM, 5090B, 385C, 385CL, 385C FS, 385CL MH, AND 385C OEM EXCAVATORS
Testing and Adjusting
Swing Speed and Overswing on Level Ground - Check
385C Excavator Hydraulic System
Swing Speed and Swing Drift on a Slope - Check
385C Excavator Hydraulic System
Fan Motor (Hydraulic Oil Cooler) - Test - Measurement of Case Drain Oil
385C Excavator Hydraulic System
Fan Motor (Radiator Cooling) - Test - Measurement of Case Drain Oil
385C Excavator Hydraulic System
Travel on Level Ground - Test - Optional Test
385C Excavator Hydraulic System
Travel on Level Ground - Test
385C Excavator Hydraulic System
Machine Drift on a Slope - Check
385C Excavator Hydraulic System
Swing Motor - Test - Measurement of Case Drain Oil
385C Excavator Hydraulic System
Fan Motor Speed (Hydraulic and Radiator Cooling) - Test and Adjust
385C Excavator Hydraulic System
Travel Motor - Test - Measurement of Case Drain Oil
385C Excavator Hydraulic System
Relief Valve (Crossover) - Test and Adjust
385C Excavator Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Troubleshooting
Cooling Fan Control - Test
C15 and C18 Engines for Caterpillar Built Machines
Cooling Fan Reversing - Test
C15 and C18 Engines for Caterpillar Built Machines
Disassembly and Assembly
Piston Motor (Hydraulic Fan) - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Piston Motor (Hydraulic Fan) - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Piston Motor (Hydraulic Fan) - Remove - Radiator
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Piston Motor (Hydraulic Fan) - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Travel Motor - Remove
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Piston Motor (Hydraulic Fan) - Install - Hydraulic Oil Cooler
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Travel Motor - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Travel Motor - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Travel Motor - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Remove - Front
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Install - Front
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Piston Motor (Hydraulic Fan) - Remove - Hydraulic Oil Cooler
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Remove - Rear
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Motor - Install - Rear
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Proper Operation of Swing Function Will Prevent Damage to the Swing Motor and the Bearings in the Swing Drive {5459, 7063, 79PA}
2006/03/27
The Durability of the Swing Motor Is Increased {5058}
2007/03/12
An Improved Assembly Process Prevents Failures of the Swing Motor {5058}
2008/06/23

Caterpillar Parts SIS Catalog 385C :

MOTOR GP-SWING
234-4540 MOTOR GP-SWING
MOTOR GP-SWING
234-4537 MOTOR GP-SWING
MOTOR GP-SWING
234-4535 MOTOR GP-SWING
MOTOR GP-PISTON
295-9421 MOTOR GP-PISTON
MOTOR GP-PISTON
247-8978 MOTOR GP-PISTON
MOTOR GP-PISTON
225-4614 MOTOR GP-PISTON
MOTOR GP-PISTON
200-3252 MOTOR GP-PISTON
MOTOR & MTG GP-TRAVEL
155-9198 MOTOR & MTG GP-TRAVEL
MOTOR GP-SWING
295-9447 MOTOR GP-SWING
MOTOR GP-TRAVEL
209-5895 MOTOR GP-TRAVEL
MOUNTING GP-COUNTERWEIGHT CYL
197-2172 MOUNTING GP-COUNTERWEIGHT CYL
MOUNTING GP-MAIN CONTROL VALVE
239-1784 MOUNTING GP-MAIN CONTROL VALVE
PLUG GP-CONTROL VALVE
171-0113 PLUG GP-CONTROL VALVE
PUMP & MTG GP-HYDRAULIC
242-6924 PUMP & MTG GP-HYDRAULIC
PUMP & MTG GP-HYDRAULIC
242-6924 PUMP & MTG GP-HYDRAULIC
PUMP & MTG GP-MAIN HYDRAULIC
222-8316 PUMP & MTG GP-MAIN HYDRAULIC

Truck sale:

CATERPILLAR 385 C 2010
 
CATERPILLAR 385 C 2010
- TRACK EXCAVATORS
WAGNER ASIA EQUIPMENT LLC
Bayangol district, 4th Khoroo, Baruun Uildver-133 Wagner Asia Bldg, P.O.Box-26
2015 CAT 385C
Call 
2015 CAT 385C

Shangjia Commerce and Trade Co. Ltd.
2005 CAT 385C
Call 
2005 CAT 385C

LIGRO TRADING BV
Panheel, Panheel, The Netherlands
2008 CAT 385C
USD $145,000 
2008 CAT 385C

Bluesky International FZC
2010 CAT 385C
Call 
2010 CAT 385C

Best Machinery Holland BV
Rotterdam, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.