AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

165-9358 ROTATING GP-PUMP S/N KBC1-UP PART OF 259-0899 ROTATING GP-PUMP 385C EXCAVATOR


HYDRAULIC SYSTEM
PUMP GP
SWIVEL GP
FILTER GP
SWIVEL GP
TANK GP
VALVE GP-LOAD CONTROL

EXCAVATOR 385C EXCAVATOR KBC
 385C Excavator KBC00001-UP (MACHINE) POWERED BY C18 Engine SEBP4206 385C KBC   (2003)

HYDRAULIC SYSTEM

PUMP GP
PUMP GP-PISTON
266-7953 PUMP GP-PISTON
ROTATING GP-PUMP
155-9135 ROTATING GP-PUMP
ROTATING GP-PUMP
165-9358 ROTATING GP-PUMP
ROTATING GP-PUMP
259-0816 ROTATING GP-PUMP
ROTATING GP-PUMP
259-0899 ROTATING GP-PUMP
VALVE GP-PUMP CONTROL
111-9997 VALVE GP-PUMP CONTROL
 

#SEBP42060690
 

165-9358: ROTATING GP-PUMP

165-9358 ROTATING GP-PUMP
S/N KBC1-UP
PART OF 259-0899 ROTATING GP-PUMP
i02466501 SEBP4206
1659358 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-9363 [20] SPRING  
2. 165-9359 [1] RETAINER  
3. 165-9361 B [2] SHIM (0.5-MM THK)  
4. 165-9362 B [2] SHIM (0.75-MM THK)  
5. 165-9360 [1] GUIDE-BALL  
6. 164-8166 [1] BARREL AS  
7. 259-0882 [1] PISTON AS-PUMP  
  B   USE AS REQUIRED
 

#SEBP42060691
 

259-0816: ROTATING GP-PUMP

259-0816 ROTATING GP-PUMP
S/N KBC1-UP
PART OF 247-8978 MOTOR GP-PISTON
i02364925 SEBP4206
2590816 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 168-3379 [3] PIN  
2. 168-3382 [1] WASHER (30X42X2.7-MM THK)  
3. 185-0292 [1] SPRING  
4. 6V-7723 [1] RING-RETAINING  
5. 185-0287 [1] PLATE-VALVE  
6. 185-0289 [1] BARREL  
7. [9] PISTON AS  
8. 168-3378 [1] BEARING-SPHERICAL  
9. 168-3385 [1] PLATE-RETRACTION  
 

#SEBP42060692
 

259-0899: ROTATING GP-PUMP

259-0899 ROTATING GP-PUMP
S/N KBC1-UP
PART OF 259-0784, 266-7953 PUMP GP-PISTON
i02474439 SEBP4206
2590899 ROTATING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 259-0884 [1] SEAL-SHAFT  
2. 6I-6788 [1] RING-RETAINING  
3. 6V-8260 [1] SEAL-O-RING  
4. 170-9901 [1] BEARING  
5. 095-0929 [1] RING-RETAINING  
6. 165-9358 Y [1] ROTATING GP-PUMP  
7. 8T-8442 M [4] BOLT-SOCKET HEAD (M6X1X30-MM)  
8. 165-9357 [2] RETAINER  
9. 259-0895 [1] BEARING  
10. 165-9354 [1] SWASHPLATE  
11. 191-5592 [1] BEARING AS  
12. 6E-3840 [4] ROD  
13. 259-0883 [1] COVER  
14. 191-5591 [1] SHAFT  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060693
 

7Y-4827: ROTOR GP-SWIVEL

7Y-4827 ROTOR GP-SWIVEL
S/N KBC1-UP
PART OF 156-0622 SWIVEL GP
i00425216 SEBP4206
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7Y-4830 Y [1] ROTOR GP-SWIVEL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060694
 

7Y-4830: ROTOR GP-SWIVEL

7Y-4830 ROTOR GP-SWIVEL
S/N KBC1-UP
PART OF 7Y-4827 ROTOR GP-SWIVEL
i00425224 SEBP4206
7Y4830 ROTOR GP-SWIVEL Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4836 [1] ROTOR  
2. 7Y-4832 [1] BLOCK AS  
3. 9X-8257 [5] WASHER (17.5X30X3.5-MM THK)  
4. 7X-2557 M [5] BOLT (M16X2X140-MM)  
5. 4J-5140 [1] SEAL-O-RING  
6. 4J-0521 [5] SEAL-O-RING  
  M   METRIC PART
 

#SEBP42060695
 

155-9235: SCREEN GP-HYDRAULIC

155-9235 SCREEN GP-HYDRAULIC -TANK
S/N KBC1-UP
PART OF 227-0367 TANK & FILTER GP-HYDRAULIC
i01548182 SEBP4206
1559235 SCREEN GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-6639 [1] SPRING  
2. 259-0918 [1] GUIDE  
3. 209-6014 [1] SCREEN AS (HYDRAULIC TANK)(HYDRAULIC OIL)  
4. 155-9236 [1] ROD  
5. 5L-5032 [1] SEAL-O-RING  
6. 8T-4133 M [2] NUT (M10X1.5-THD)  
  M   METRIC PART
 

#SEBP42060696
 

156-0622: SWIVEL GP

156-0622 SWIVEL GP
S/N KBC1-UP
PART OF 239-1925 LINES GP-TRAVEL MOTOR
i01072686 SEBP4206
1560622 SWIVEL GP Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-4837 [1] COVER  
2. 7Y-4826 [1] HOUSING  
3. 8T-6759 [1] PLUG-PIPE  
4. 7Y-4827 Y [1] ROTOR GP-SWIVEL  
5. 095-1633 [3] SEAL-O-RING  
6. 156-0619 [5] SEAL  
7. 7Y-4843 [1] RETAINER  
8. 095-1728 [1] SEAL-O-RING  
9. 8T-4136 M [9] BOLT (M10X1.5X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060697
 

227-0367: TANK & FILTER GP-HYDRAULIC

227-0367 TANK & FILTER GP-HYDRAULIC
S/N KBC1-UP
810-L (214-US GAL)
PART OF 227-0374 TANK & MTG GP-HYDRAULIC
i02125015 SEBP4206
2270367 TANK & FILTER GP-HYDRAULIC Parts scheme 2270367 TANK & FILTER GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4I-3591 [1] FLANGE AS  
2. 4I-5394 [1] SENDER AS-TEMPERATURE (HYDRAULIC OIL)  
  4I-5490 M [2] SCREW-MACHINE (M4X0.7X6-MM)  
  095-0826 [2] LOCKWASHER  
3. 7Y-4796 [1] COVER AS  
4. 202-3773 [1] SUPPORT AS  
5. 202-4046 [1] PIPE AS  
6. 202-4048 [1] PIPE AS  
7. 204-8295 [1] PIPE AS  
8. 212-5467 [1] BREATHER GP (HYDRAULIC TANK)  
9. 213-0677 [1] SWITCH AS-LIQUID LEVEL (LOW HYDRAULIC OIL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
10. 215-4011 [2] CLAMP-T BOLT  
11. 227-0620 Y [1] GAUGE GP-SIGHT (HYDRAULIC OIL LEVEL)  
13. 227-0684 [1] TUBE AS  
14. 229-1021 [1] HOSE  
15. 234-4531 Y [1] FILTER GP-OIL (HYDRAULIC)(RETURN)  
16. 242-6878 Y [1] FILTER GP-OIL (HYDRAULIC)(RETURN)  
17. 207-6403 [1] PLUG  
18. 207-6404 [1] WASHER (49.5X60.5X1.5-MM THK)  
19. 095-1608 [1] SEAL-O-RING  
20. 095-1735 [2] SEAL-O-RING  
21. 129-7813 [1] PLATE  
22. 155-3624 [1] PLUG AS  
  3J-7354 [1] SEAL-O-RING  
  9S-4182 [1] PLUG (7/16-20-THD)  
23. 155-9235 Y [1] SCREEN GP-HYDRAULIC (TANK)  
24. 1H-7339 [1] SEAL-O-RING  
25. 8T-7971 [4] WASHER-HARD (13.5X25.5X5-MM THK)  
26. 3D-2824 [1] SEAL-O-RING  
27. 3K-0360 [1] SEAL-O-RING  
28. 4J-0522 [1] SEAL-O-RING  
29. 4J-0524 [1] SEAL-O-RING  
30. 4J-0527 [1] SEAL-O-RING  
31. 5P-8068 [1] SEAL-O-RING  
32. 6E-5534 Y [1] FILTER GP-OIL (HYDRAULIC)(CASE DRAIN)  
33. 6I-0723 [1] PLUG-OIL DRAIN (HYDRAULIC TANK)  
34. 6I-0724 [1] ADAPTER-PLUG  
35. 6J-2680 [3] SEAL-O-RING  
36. 7X-2549 M [4] BOLT (M12X1.75X100-MM)  
37. 7X-2550 M [8] BOLT (M12X1.75X110-MM)  
38. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
39. 8T-4137 M [16] BOLT (M10X1.5X20-MM)  
40. 8T-4138 M [4] BOLT (M6X1X20-MM)  
41. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
42. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
43. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
44. 8T-4195 M [4] BOLT (M10X1.5X30-MM)  
45. 8T-4223 [26] WASHER-HARD (13.5X25.5X3-MM THK)  
46. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
47. 8T-4956 M [6] BOLT (M12X1.75X35-MM)  
48. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
49. 8T-6761 [1] PLUG-PIPE (1-11-1/2 NPT THD)  
50. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
51. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
52. 7X-1443 [2] PROTECTOR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060698
 

227-0374: TANK & MTG GP-HYDRAULIC

227-0374 TANK & MTG GP-HYDRAULIC
S/N KBC1-UP
PART OF 225-4834 HYDRAULIC AR
i02124384 SEBP4206
2270374 TANK & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-8178 [6] SPACER (0.891X1.625X1.5-IN THK)  
2. 227-0367 Y [1] TANK & FILTER GP-HYDRAULIC  
3. 087-8906 B [6] SHIM (2-MM THK)  
4. 087-8907 B [6] SHIM (1-MM THK)  
5. 087-8909 B [6] SHIM (0.4-MM THK)  
6. 447-1716 M [6] BOLT (M20X2.5X80-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP42060699
 

239-8813: VALVE AR-BOOM LOWERING CONTROL

239-8813 VALVE AR-BOOM LOWERING CONTROL -HIGH PRESSURE CUTOFF
S/N KBC1-UP
AN ATTACHMENT
i02127233 SEBP4206
  For full view, you need register

Parts for your 385C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] FILM GP (ACCUMULATOR, FUEL PRESSURE)  
  245-5310 Y [1] LINES GP-BOOM CYLINDER (BOOM LOWERING CONTROL)  
  239-1785 Y [1] LINES GP-PILOT (BOOM LOWERING CONTROL)  
  253-5278 Y [1] VALVE GP-MAIN CONTROL  
  238-2182 Y [1] WIRING GP-OVERLOAD WARNING  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MAIN HYDRAULIC PUMP ON CERTAIN 385B, 385BL, 385BL MH, 5090BL, 385C, 385CL, 385CL MH AND 385C FS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MAIN HYDRAULIC PUMP ON CERTAIN 385B, 385BL, 385BL MH, 5090BL, 385C, 385CL, 385CL MH AND 385C FS EXCAVATORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Slow Acceleration and a Feeling of Low Power May Be Experienced On Certain 385C and 385C MHPU Excavators{5070, 5455}
Slow Acceleration and a Feeling of Low Power May Be Experienced On Certain 385C and 385C MHPU Excavators{5070, 5455}
Specifications
Fan Drive Pump
385C Excavator and 385C Front Shovel Machine System Specifications
Main Hydraulic Pump
385C Excavator and 385C Front Shovel Machine System Specifications
Swing Pump
385C Excavator and 385C Front Shovel Machine System Specifications
Gear Pump - Pilot
385C Excavator and 385C Front Shovel Machine System Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MAIN HYDRAULIC PUMP ON CERTAIN 385B, 385BL, 385BL MH, 5090BL, 385C, 385CL, 385CL MH AND 385C FS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MAIN HYDRAULIC PUMP ON CERTAIN 385B, 385BL, 385BL MH, 5090BL, 385C, 385CL, 385CL MH AND 385C FS EXCAVATORS
Service Letter-Asia
Systems Operation
Signal Duplication Valve
385C Excavator Hydraulic System
Gear Pump (Pilot)
385C Excavator Hydraulic System
Fan Pump (Hydraulic and Radiator Cooling)
385C Excavator Hydraulic System
Swing Pump
385C Excavator Hydraulic System
Proportional Priority Pressure Compensation System
385C Excavator Hydraulic System
Pump Control (Swing)
385C Excavator Hydraulic System
Main Hydraulic Pump
385C Excavator Hydraulic System
Solenoid Valve (Proportional Reducing)
385C Excavator Hydraulic System
Pump Control (Main Hydraulic)
385C Excavator Hydraulic System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MAIN HYDRAULIC PUMP ON CERTAIN 385B, 385BL, 385BL MH, 5090BL, 385C, 385CL, 385CL MH AND 385C FS EXCAVATORS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE MAIN HYDRAULIC PUMP ON CERTAIN 385B, 385BL, 385BL MH, 5090BL, 385C, 385CL, 385CL MH AND 385C FS EXCAVATORS
Testing and Adjusting
Main Hydraulic Pump Air - Purge
385C Excavator Hydraulic System
Swing Speed and Overswing on Level Ground - Check
385C Excavator Hydraulic System
Swing Speed and Swing Drift on a Slope - Check
385C Excavator Hydraulic System
Pump Control (Output Flow) - Adjust
385C Excavator Hydraulic System
Piston Pump (Fan Motor) - Test - Measurement of Case Drain Oil
385C Excavator Hydraulic System
Margin Pressure - Test and Adjust
385C Excavator Hydraulic System
Main Pump (Flow) - Test - Constant Horsepower Flow Control
385C Excavator Hydraulic System
Swing Pump - Test - Constant Horsepower Flow Control
385C Excavator Hydraulic System
Swing Pump - Test - Positive Flow Control
385C Excavator Hydraulic System
Gear Pump (Pilot) - Test
385C Excavator Hydraulic System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Gear Pump (Pilot) - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Gear Pump (Pilot) - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Main Hydraulic Pump - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Main Hydraulic Pump - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Pump - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Pump - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Disassemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Assemble
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Pump - Remove
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Gear Pump (Pilot) - Remove
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Gear Pump (Pilot) - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Main Hydraulic Pump - Remove
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Main Hydraulic Pump - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Swing Pump - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Remove
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Pump (Hydraulic Oil Cooler and Fan Drive) - Install
385C Excavator and 385C MHPU Mobile Hydraulic Power Unit Machine Systems
Service Magazine
Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25
Preventing Oil Leaks from the Pressure Sensors on the Main Hydraulic Pump {5057, 5070}
2007/04/02
New Spring Assemblies in a New Flexible Coupling Gp Have Increased Durability {3252, 5062}
2008/02/25
A New Seal Kit Improves Sealing for the Pump Control Valve Group (Pressure, Flow Compensator) on the Main Hydraulic Pump for Certain 385C Excavators {5455}
2009/08/17
A New Main Pump Group is Now Available for 385C Excavators {5070}
2011/07/22
An Improved Lubrication Hose to the Flywheel Housing is Now Used on Certain 365 Through 390 Excavators {1307, 5070}
2013/10/17

Caterpillar Parts SIS Catalog 385C :

ROTATING GP-PUMP
155-9135 ROTATING GP-PUMP
ROTATING GP-MOTOR
185-0266 ROTATING GP-MOTOR
PUMP GP-PISTON
266-7953 PUMP GP-PISTON
PUMP GP-PISTON
259-0784 PUMP GP-PISTON
PUMP GP-PISTON
259-0784 PUMP GP-PISTON
PUMP GP-PISTON
170-9918 PUMP GP-PISTON
PUMP GP-MAIN HYDRAULIC
200-3269 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
155-9205 PUMP GP-MAIN HYDRAULIC
ROTATING GP-PUMP
259-0816 ROTATING GP-PUMP
ROTATING GP-PUMP
259-0899 ROTATING GP-PUMP
7Y-4827 ROTOR GP-SWIVEL
ROTOR GP-SWIVEL
7Y-4830 ROTOR GP-SWIVEL
SCREEN GP-HYDRAULIC
155-9235 SCREEN GP-HYDRAULIC
SWIVEL GP
156-0622 SWIVEL GP
TANK & FILTER GP-HYDRAULIC
227-0367 TANK & FILTER GP-HYDRAULIC
TANK & MTG GP-HYDRAULIC
227-0374 TANK & MTG GP-HYDRAULIC

Truck sale:

CATERPILLAR 385 C 2010
 
CATERPILLAR 385 C 2010
- TRACK EXCAVATORS
WAGNER ASIA EQUIPMENT LLC
Bayangol district, 4th Khoroo, Baruun Uildver-133 Wagner Asia Bldg, P.O.Box-26
2015 CAT 385C
Call 
2015 CAT 385C

Shangjia Commerce and Trade Co. Ltd.
2005 CAT 385C
Call 
2005 CAT 385C

LIGRO TRADING BV
Panheel, Panheel, The Netherlands
2008 CAT 385C
USD $145,000 
2008 CAT 385C

Bluesky International FZC
2010 CAT 385C
Call 
2010 CAT 385C

Best Machinery Holland BV
Rotterdam, The Netherlands
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.