224-9320 CYLINDER GP-STABILIZER S/N BDR2001-99999 110MM (4.3 IN) BORE X 492MM (19.4 IN) STROKE PART OF 207-0365, 252-7303 STABILIZER AR AN ATTACHMENT M313C



HYDRAULIC SYSTEM
CYLINDER GP
DRIVE GP
FILTER GP

WHEELED EXCAVATOR M313C WHEELED EXCAVATOR BDR
 M313C Excavator BDR02001-UP (MACHINE) POWERED BY 3054E Engine SEBP4226 M313C BDR   (2002)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-HYDRAULIC
296-3250 CYLINDER GP-HYDRAULIC
CYLINDER GP-OFFSET
144-5970 CYLINDER GP-OFFSET
CYLINDER GP-STABILIZER
224-9320 CYLINDER GP-STABILIZER
CYLINDER GP-STEERING
278-7551 CYLINDER GP-STEERING
CYLINDER GP-STICK
198-7212 CYLINDER GP-STICK
CYLINDER GP-STICK
296-3251 CYLINDER GP-STICK
 

#SEBP42260250
 

224-9320: CYLINDER GP-STABILIZER

224-9320 CYLINDER GP-STABILIZER
S/N BDR2001-99999
110MM (4.3 IN) BORE X 492MM (19.4 IN) STROKE
PART OF 207-0365, 252-7303 STABILIZER AR
AN ATTACHMENT
i01834841 SEBP4226
2249320 CYLINDER GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 226-3298 [1] CYLINDER AS  
2. 200-0917 [1] ROD  
3. 125-9693 [1] PISTON  
4. 125-9694 [1] COLLAR  
5. 221-3539 [1] PISTON  
6. 118-3116 [2] RETAINER  
7. 118-3117 [2] CONE  
8. 5W-1274 [2] PLUG  
9. 225-8698 J [1] SEAL  
10. 118-2716 J [1] RING  
11. 118-2717 J [2] RING  
12. 112-6920 J [1] SEAL-O-RING  
13. 125-9695 J [1] RING-BACKUP  
14. 125-9701 J [1] SEAL-O-RING  
15. 125-9696 J [1] RING  
16. 125-9697 J [1] SEAL-O-RING  
17. 125-9698 J [1] RING-BACKUP  
18. 125-9699 J [1] RING  
19. 5W-6388 J [1] SEAL-O-RING  
20. 118-2727 J [1] RING-BACKUP  
21. 4J-5351 J [3] SEAL-O-RING  
22. 118-3130 J [2] RING-BACKUP  
23. 118-3131 J [2] SEAL-O-RING  
24. 221-3541 J [2] RING-BACKUP  
25. 118-3132 [2] SPRING  
26. 118-2730 M [1] NUT (M52X1.5-THD, LH)  
27. 118-2731 [1] PIN  
28. 8G-4189 [2] BEARING-SELF-ALIGNING  
29. 8T-0707 [4] RING-RETAINING (INTERNAL)  
30. 118-2732 [1] FITTING-GREASE  
   
    AVAILABLE REPAIR KIT(S):
  226-3299 J [1] KIT-SEAL (STABILIZER CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP42260251
 

278-7551: CYLINDER GP-STEERING

278-7551 CYLINDER GP-STEERING
S/N BDR2001-99999
PART OF 237-4510 AXLE GP-STEERING
i02504091 SEBP4226
2787551 CYLINDER GP-STEERING Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 243-0920 [1] ROD AS  
2. 243-0921 [1] GUIDE  
3. 243-0922 [1] RING  
4. 243-0923 [1] RING-SNAP  
5. 243-0925 [1] RING-RETAINING  
6. 243-0926 [1] FLANGE  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
   
    AVAILABLE REPAIR KIT(S):
  243-0927 [1] KIT-SEAL (STEERING AXLE)  
    (INCLUDES GUIDE RINGS, PISTON RING, RING SEAL, ROD SEALS, SCRAPER SEALS & O-RING SEAL)
 

#SEBP42260252
 

198-7212: CYLINDER GP-STICK

198-7212 CYLINDER GP-STICK
S/N BDR2001-99999
110MM (4.33 IN) BORE X 1147MM (45.16 IN) STROKE
PART OF 198-7256 CYLINDER & SEAL GP-STICK
FIELD REPLACEMENT ORDER @@@@@296-3251@@@@@
AN ATTACHMENT
i01901822 SEBP4226
1987212 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 158-6380 [1] HEAD  
2. 198-7217 [1] CYLINDER AS  
2A. 105-7366 [1] BUSHING  
3. 296-3273 [1] ROD & BEARING AS-CYLINDER  
3A. 106-6872 [1] BUSHING  
4. 095-9806 M [8] BOLT-SOCKET HEAD (M16X2X80-MM)  
5. 096-3467 J [1] RING-BACKUP  
6. 170-9858 J [1] SEAL-U-CUP  
7. 170-9842 J [1] SEAL-BUFFER  
8. 099-0661 [1] RING-RETAINING  
9. 103-8441 [1] RING-RETAINING  
10. 103-8442 [1] RING  
11. 103-8443 [1] STOP  
12. 112-6450 J [1] RING-BACKUP  
13. 112-6920 J [1] SEAL-O-RING  
14. 114-0750 [1] BUSHING  
15. 143-8031 J [1] RING  
16. 143-8034 J [1] RING  
17. 143-8150 M [1] LOCKNUT-SPECIAL  
18. 147-5818 [1] PISTON  
19. 147-5819 J [1] RING  
20. 165-9284 J [1] SEAL-LIP TYPE  
21. 185-9051 J [1] RING-SEAL  
22. 5I-3030 [1] STOP  
23. 8T-4241 [2] RING-RETAINING  
24. 9X-7301 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  260-5322 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP42260253
 

296-3251: CYLINDER GP-STICK

296-3251 CYLINDER GP-STICK
S/N BDR2001-99999
110-MM (4.33-IN)BORE X 1147-MM (45.16-IN)STROKE
FIELD REPLACEMENT FOR @@@@@198-7212@@@@@
i02676282 SEBP4226
2963251 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 158-6380 [1] HEAD  
2. 165-9284 J [1] SEAL-LIP TYPE  
3. 198-7217 [1] CYLINDER AS  
3A. 105-7366 [2] BUSHING  
4. 296-3273 [1] ROD & BEARING AS-CYLINDER  
4A. 106-6872 [1] BUSHING  
5. 095-9806 M [8] BOLT-SOCKET HEAD (M16X2X80-MM)  
6. 096-3467 J [1] RING-BACKUP  
7. 099-0661 [1] RING-RETAINING  
8. 103-8441 [1] RING-RETAINING  
9. 103-8442 [1] RING  
10. 103-8443 [1] STOP  
11. 112-6450 J [1] RING-BACKUP  
12. 112-6920 J [1] SEAL-O-RING  
13. 114-0750 [1] BUSHING  
14. 143-8031 J [1] RING  
15. 143-8034 J [1] RING  
16. 143-8150 M [1] LOCKNUT-SPECIAL  
17. 147-5818 [1] PISTON  
18. 147-5819 J [1] RING  
19. 170-9842 J [1] SEAL-BUFFER  
20. 170-9858 J [1] SEAL-U-CUP  
21. 185-9051 J [1] RING-SEAL  
22. 5I-3030 [1] STOP  
23. 8T-4241 [2] RING-RETAINING  
24. 9X-7301 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  260-5322 J [1] KIT-SEAL (STICK CYLINDER)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP42260254
 

217-5635: DRIVE GP-PUMP

217-5635 DRIVE GP-PUMP
S/N BDR2001-99999
PART OF 240-0151 PUMP GP-PISTON
FIELD REPLACEMENT ORDER @@@@@430-9489@@@@@
i01904317 SEBP4226
2175635 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 130-8028 [1] FLANGE  
2. 130-8029 [1] HUB-CLUTCH  
3. 3K-0715 [1] SEAL-O-RING  
4. 351-1768 [1] SEAL-O-RING  
5. 8T-3957 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
6. 216-0085 [1] SPRING  
7. 216-0087 [1] BUSHING-GUIDE  
  M   METRIC PART
 

#SEBP42260255
 

430-9489: DRIVE GP-PUMP

430-9489 DRIVE GP-PUMP
i05349240 SEBP4226
4309489 DRIVE GP-PUMP Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 430-9492 [1] FLANGE  
2. 130-8029 [1] HUB-CLUTCH  
3. 2H-3934 J [1] SEAL-O-RING  
4. 5F-3106 J [1] SEAL-O-RING  
5. 8T-3957 M [4] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
6. 216-0085 [1] SPRING  
7. 216-0087 [1] BUSHING-GUIDE  
   
    AVAILABLE REPAIR KIT(S):
  443-7824 J [1] KIT-SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP42260256
 

117-7985: DRIVE GP-SWING

117-7985 DRIVE GP-SWING
S/N BDR2001-99999
PART OF 212-6805 CHASSIS AR
i01226762 SEBP4226
1177985 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 152-7374 Y [1] MOTOR GP-SWING  
2. 152-7375 Y [1] DRIVE GP-SWING  
3. 107-9403 M [12] BOLT-SOCKET HEAD (M16X2X35-MM)  
4. 101-7404 M [4] BOLT-SOCKET HEAD (M10X1.5X30-MM)  
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP42260257
 

152-7375: DRIVE GP-SWING

152-7375 DRIVE GP-SWING
S/N BDR2001-99999
PART OF 117-7985 DRIVE GP-SWING
i01224982 SEBP4226
1527375 DRIVE GP-SWING Parts scheme 1527375 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 155-0821 [1] SHAFT  
2. 155-0822 [3] GEAR-PLANETARY  
3. 155-0823 [1] CARRIER  
4. 155-0824 [3] PIN  
5. 082-3084 [6] WASHER  
6. 082-3085 [6] WASHER  
7. 132-4292 [63] BEARING AS-NEEDLE  
8. 095-0919 [3] RING-RETAINING  
9. 155-0827 [1] HOUSING AS-SWING  
10. 155-0828 [1] SEAL-LIP TYPE  
11. 155-0829 [1] SEAL  
12. 155-0830 [1] PINION  
13. 155-0831 [1] WASHER-SPECIAL  
14. 155-0832 [1] BEARING AS-ROLLER  
15. 155-0833 [1] BEARING AS-ROLLER  
16. 155-0835 [2] NUT-SLOTTED  
17. 155-0834 [1] RING  
19. 155-0836 [1] CARRIER-PLANETARY  
20. 155-0837 [4] GEAR-PLANETARY  
21. 155-0838 [4] BEARING AS-ROLLER  
22. 1H-8647 [4] RING-SNAP  
23. 098-2981 [3] SHIM (2-MM THK)  
24. 110-4737 [1] RING-RETAINING  
25. 121-8088 [2] BALL BEARING  
26. 155-0839 [1] GEAR-SUN  
27. 179-3153 [2] SHIM (2.5-MM THK)  
28. 6V-5201 [2] RING-RETAINING  
29. 155-0848 [1] HOUSING-BRAKE  
30. 155-0849 [1] ORIFICE  
31. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
32. 201-7396 [1] SEAL-O-RING  
33. 155-0850 [1] PISTON  
34. 155-0851 [1] SEAL-LIP TYPE  
35. 155-0852 [1] SEAL-LIP TYPE  
36. 179-3151 [1] SPRING  
37. 179-3154 [1] SHIM (3.5-MM THK)  
38. 132-4268 [4] DISC-CLUTCH (1.7-MM THK)  
39. 132-4262 B [5] DISC-CLUTCH (1.4-MM THK)  
40. 132-4263 B [1] DISC-CLUTCH (1.2-MM THK)  
41. 132-4265 B [1] DISC-CLUTCH (1.6-MM THK)  
42. 132-4266 B [1] DISC-CLUTCH (1.8-MM THK)  
43. 9X-6574 [1] RING-RETAINING  
44. 155-0855 [1] SLEEVE  
45. 8T-0707 [1] RING-RETAINING (INTERNAL)  
46. 179-3560 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP42260258
 

369-3170: DRIVE GP-SWING

369-3170 DRIVE GP-SWING
S/N BDR2001-99999
i05753240 SEBP4226
3693170 DRIVE GP-SWING Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 155-0821 [1] SHAFT  
2. 155-0822 [3] GEAR-PLANETARY  
3. 155-0823 [1] CARRIER  
4. 155-0824 [3] PIN  
5. 082-3084 [6] WASHER  
6. 082-3085 [6] WASHER  
7. 132-4292 [63] BEARING AS-NEEDLE  
8. 095-0919 [3] RING-RETAINING  
9. 155-0827 [1] HOUSING AS-SWING  
10. 155-0828 [1] SEAL-LIP TYPE  
11. 155-0829 [1] SEAL  
12. 155-0830 [1] PINION  
13. 155-0831 [1] WASHER-SPECIAL  
14. 155-0832 [1] BEARING AS-ROLLER  
15. 155-0833 [1] BEARING AS-ROLLER  
16. 155-0835 [2] NUT-SLOTTED  
17. 155-0834 [1] RING  
18. 155-0836 [1] CARRIER-PLANETARY  
19. 155-0837 [4] GEAR-PLANETARY  
20. 155-0838 [4] BEARING AS-ROLLER  
21. 1H-8647 [4] RING-SNAP  
22. 098-2981 [1] SHIM (2-MM THK)  
23. 110-4737 [1] RING-RETAINING  
24. 121-8088 [2] BALL BEARING  
25. 155-0839 [1] GEAR-SUN  
26. 179-3153 [2] SHIM (2.5-MM THK)  
27. 6V-5201 [2] RING-RETAINING  
28. 155-0848 [1] HOUSING-BRAKE  
29. 155-0849 [1] ORIFICE  
30. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
31. 201-7396 [1] SEAL-O-RING  
32. 155-0850 [1] PISTON  
33. 155-0851 [1] SEAL-LIP TYPE  
34. 155-0852 [1] SEAL-LIP TYPE  
35. 179-3151 [1] SPRING  
36. 179-3154 [1] SHIM (3.5-MM THK)  
37. 132-4268 [4] DISC-CLUTCH (1.7-MM THK)  
38. 132-4262 B [5] DISC-CLUTCH (1.4-MM THK)  
39. 132-4263 B [1] DISC-CLUTCH (1.2-MM THK)  
40. 132-4265 B [1] DISC-CLUTCH (1.6-MM THK)  
41. 132-4266 B [1] DISC-CLUTCH (1.8-MM THK)  
42. 9X-6574 [1] RING-RETAINING  
43. 155-0855 [1] SLEEVE  
44. 8T-0707 [1] RING-RETAINING (INTERNAL)  
45. 179-3560 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP42260259
 

109-7288: FILTER GP-OIL

109-7288 FILTER GP-OIL -HYDRAULIC, SWING CIRCUIT
S/N BDR2001-99999
PART OF 188-7584 LINES GP-SWING MOTOR
i00492621 SEBP4226
1097288 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your M313C WHEELED EXCAVATOR:

Pos. Part No Qty Parts name Comments
1. 124-3598 [1] BASE-FILTER  
2. 117-1495 [1] SEAL-O-RING  
3. 117-0951 [1] HOUSING  
4. 361-7480 [1] FILTER ELEMENT-OIL (ADVANCED EFFICIENCY)(SWING CIRCUIT)  
 

Information:

Operation and Maintenance Manual
Oscillating Axle Control
M313C and M315C Excavators
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ASSEMBLY ON CERTAIN M313C, M315C, AND M316C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ASSEMBLY ON CERTAIN M313C, M315C, AND M316C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE DOZER CYLINDER ON CERTAIN M313C AND M315C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE DOZER CYLINDER ON CERTAIN M313C AND M315C WHEELED EXCAVATORS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ASSEMBLY ON CERTAIN M313C, M315C, AND M316C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ASSEMBLY ON CERTAIN M313C, M315C, AND M316C WHEELED EXCAVATORS
Service Letter-CFEL
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE DOZER CYLINDER ON CERTAIN M313C AND M315C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE DOZER CYLINDER ON CERTAIN M313C AND M315C WHEELED EXCAVATORS
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Outrigger and Dozer Blade Cylinders Leak on M313 Through M325 Wheeled Excavator and Wheeled Material Handlers{5102, 5468}
Outrigger and Dozer Blade Cylinders Leak on M313 Through M325 Wheeled Excavator and Wheeled Material Handlers{5102, 5468}
Specifications
Bucket Cylinder - Ditch Cleaning
M313C Wheeled Excavator Machine System
Stabilizer Cylinders
M313C Wheeled Excavator Machine System
Blade Lift Cylinder
M313C Wheeled Excavator Machine System
Stick Cylinder
M313C Wheeled Excavator Machine System
Boom Cylinder - Variable Adjustable
M313C Wheeled Excavator Machine System
Bucket Cylinder
M313C Wheeled Excavator Machine System
Axle Oscillation Lock Cylinder
M313C Wheeled Excavator Machine System
Boom Cylinder Lines
M313C Wheeled Excavator Machine System
Boom Cylinder
M313C Wheeled Excavator Machine System
Bucket Cylinder
M313C Wheeled Excavator Machine System
Stick Cylinder
M313C Wheeled Excavator Machine System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ASSEMBLY ON CERTAIN M313C, M315C, AND M316C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ASSEMBLY ON CERTAIN M313C, M315C, AND M316C WHEELED EXCAVATORS
Service Letter-Asia
Systems Operation
Cylinders (Boom, Bucket, Stick and VA Boom)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Steering Cylinder
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System
Cylinders (Boom, Bucket, Stick and VA Boom)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Steering Cylinder
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Boom Dampening System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ASSEMBLY ON CERTAIN M313C, M315C, AND M316C WHEELED EXCAVATORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STICK CYLINDER ROD ASSEMBLY ON CERTAIN M313C, M315C, AND M316C WHEELED EXCAVATORS
Testing and Adjusting
Axle Stabilizer Cylinder Air - Purge
M313C Excavator Hydraulic System
Cylinder Speed - Check
M313C Excavator Hydraulic System
Cylinder Drift - Check
M313C Excavator Hydraulic System
Axle Oscillation Lock Cylinder Air - Purge
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Cylinder Drift - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Cylinder Speed - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System
Disassembly and Assembly
Stabilizer Cylinder - Remove and Install
M313C Excavator Machine Systems
Blade Cylinder - Remove and Install
M313C Excavator Machine Systems
Stick Cylinder - Remove and Install
M313C Excavator Machine Systems
Bucket Cylinder - Remove and Install
M313C Excavator Machine Systems
Fore Boom Cylinder - Remove and Install
M313C Excavator Machine Systems
Service Magazine
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
New Check Valves are Now Used on the Oscillating Axle on Excavators {5468}
2008/03/24
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog M313C :

CYLINDER GP-OFFSET
144-5970 CYLINDER GP-OFFSET
CYLINDER GP-HYDRAULIC
296-3250 CYLINDER GP-HYDRAULIC
CYLINDER GP-COUPLER
169-0329 CYLINDER GP-COUPLER
CYLINDER GP-BUCKET
296-3252 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
198-7213 CYLINDER GP-BUCKET
CYLINDER GP-BUCKET
185-1738 CYLINDER GP-BUCKET
CYLINDER GP-BOOM
296-3249 CYLINDER GP-BOOM
CYLINDER GP-BOOM
296-3248 CYLINDER GP-BOOM
CYLINDER GP-STEERING
278-7551 CYLINDER GP-STEERING
CYLINDER GP-STICK
198-7212 CYLINDER GP-STICK
CYLINDER GP-STICK
296-3251 CYLINDER GP-STICK
DRIVE GP-PUMP
217-5635 DRIVE GP-PUMP
DRIVE GP-PUMP
430-9489 DRIVE GP-PUMP
DRIVE GP-SWING
117-7985 DRIVE GP-SWING
DRIVE GP-SWING
152-7375 DRIVE GP-SWING
DRIVE GP-SWING
369-3170 DRIVE GP-SWING

Truck sale:

Caterpillar M313C
 
Caterpillar M313C
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M313C, mobilbagger, Bau-Und Bergbauausrüstung
30.070 
Caterpillar M313C, mobilbagger, Bau-Und Bergbauausrüstung
- wheel excavator
BERGERAT MONNOYEUR ROMANIA
Caterpillar M313C, mobilbagger, Bau-Und Bergbauausrüstung
 
Caterpillar M313C, mobilbagger, Bau-Und Bergbauausrüstung
- wheel excavator
CGT - COMPAGNIA GENERALE TRATTORI
Italy
 
 
Caterpillar M313C, Construction
- wheel excavator
BERGERAT MONNOYEUR SP. Z O.O.
Poland
Caterpillar M313C, Construction
37,500 
Caterpillar M313C, Construction
- wheel excavator
MACALLISTER MACHINERY CO., INC