183-9004 CYLINDER GP-BUCKET S/N BDY2001-99999 120-MM (4.72-IN) BORE X 1055-MM (41.54-IN) STROKE PART OF 183-9027 CYLINDER & SEAL GP-BUCKET AN ATTACHMENT M322C

HYDRAULIC SYSTEM

CYLINDER GP

0. 183-9004 CYLINDER G
1. 185-1736 CYLINDER G
2. 198-4694 CYLINDER G
3. 278-7552 CYLINDER G
4. 183-9003 CYLINDER G
5. 209-0200 CYLINDER G

DRIVE GP

6. 111-1858 DRIVE GP-S
7. 152-7372 DRIVE GP-S

FILTER GP

8. 109-7288 FILTER GP-
9. 145-7750 FILTER GP-
0. INFORMATION

WHEELED EXCAVATOR M322C WHEELED EXCAVATOR BDY
M322C Excavator BDY02001-UP (MACHINE) POWERED BY 3056E Engine SEBP4227 M322C BDY (2003)

HYDRAULIC SYSTEM

CYLINDER GP

183-9002 CYLINDER GP-BOOM

296-3228 CYLINDER GP-BOOM

183-9004 CYLINDER GP-BUCKET

185-1736 CYLINDER GP-BUCKET

198-4694 CYLINDER GP-STABILIZER

278-7552 CYLINDER GP-STEERING

#SEBP42270280

183-9004: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

183-9004 CYLINDER GP-BUCKET
S/N BDY2001-99999
120-MM (4.72-IN) BORE X 1055-MM (41.54-IN) STROKE
PART OF 183-9027 CYLINDER & SEAL GP-BUCKET
AN ATTACHMENT

i01662301 SEBP4227

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	170-9860 J	[1]	SEAL-U-CUP
2.	147-5835 M	[1]	LOCKNUT-SPECIAL
3.	170-9844 J	[1]	SEAL-BUFFER
4.	126-2043	[1]	HEAD
5.	283-6133	[1]	ROD AS
5A.	240-2914	[1]	BUSHING
6.	183-9008	[1]	CYLINDER AS
6A.	7Y-5131	[1]	BUSHING
7.	087-5510 J	[1]	RING
8.	095-1717 J	[1]	SEAL-O-RING
9.	114-0756	[1]	BUSHING
10.	158-9062	[1]	PISTON
11.	158-9063 J	[2]	RING
12.	165-9286 J	[1]	SEAL-LIP TYPE
13.	179-9674 J	[1]	RING
14.	7Y-5116 J	[1]	RING
15.	7Y-5119	[1]	RING-RETAINING
16.	7Y-5216 M	[8]	BOLT-SOCKET HEAD (M20X2.5X80-MM)
17.	9X-3592 J	[1]	SEAL AS

			AVAILABLE REPAIR KIT(S):
	236-6368 J	[1]	KIT-SEAL
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP42270281

185-1736: CYLINDER GP-BUCKET

CYLINDER GP-BUCKET

185-1736 CYLINDER GP-BUCKET
S/N BDY2001-99999
100-MM (3.9-IN) BORE X 250-MM (9.8-IN) STROKE
PART OF 117-0931, 125-4428 LINKAGE AR-BUCKET
AN ATTACHMENT

i01256705 SEBP4227

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	185-1735	[1]	CYLINDER AS
2.	8U-3885	[1]	ROD
3.	8U-3886 J	[3]	SEAL
4.	8U-3887 J	[1]	SEAL
5.	234-4855 J	[1]	SEAL
6.	8T-0707	[4]	RING-RETAINING (INTERNAL)
7.	8G-4189	[2]	BEARING-SELF-ALIGNING

			AVAILABLE REPAIR KIT(S):
	8U-3888 J		KIT-REPAIR (BUCKET CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J

#SEBP42270282

198-4694: CYLINDER GP-STABILIZER

CYLINDER GP-STABILIZER

198-4694 CYLINDER GP-STABILIZER
S/N BDY2001-99999
140-MM (5.5-IN) BORE X 512-MM (20.1-IN) STROKE
PART OF 249-8842 FRAME AR-UNDERCARRIAGE, 198-4671 STABILIZER AR
ALSO AN ATTACHMENT

i01614086 SEBP4227

1984694 CYLINDER GP-STABILIZER Parts scheme

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	212-5682	[1]	CYLINDER AS
2.	212-5683	[1]	ROD
3.	205-8508	[1]	PISTON
4.	205-8509	[1]	COLLAR
5.	221-3539	[1]	PISTON
6.	118-3116	[2]	RETAINER
7.	118-3117	[2]	CONE
8.	5W-1274	[2]	PLUG
9.	225-8699 J	[1]	SEAL
10.	8U-4010 J	[1]	RING-PISTON
11.	135-7932 J	[3]	RING
12.	206-0511 J	[1]	SEAL-O-RING
13.	206-0512 J	[1]	RING-BACKUP
14.	2D-8009 J	[1]	SEAL-O-RING
15.	205-8510 J	[1]	RING
16.	9S-3888 J	[1]	SEAL-O-RING
17.	205-8511 J	[1]	RING-BACKUP
18.	205-8512 J	[1]	RING
19.	135-7940 J	[1]	SEAL-O-RING
20.	125-7002 J	[1]	RING-BACKUP
21.	4J-5351 J	[3]	SEAL-O-RING
22.	118-3130 J	[2]	RING-BACKUP
23.	118-3131 J	[2]	SEAL-O-RING
24.	118-3132	[2]	SPRING
25.	118-2730 M	[1]	NUT (M52X1.5-THD, LH)
26.	118-2731	[1]	PIN
27.	8G-4371	[2]	BEARING-SELF-ALIGNING
28.	8T-7567	[2]	RING-RETAINING (INTERNAL)
29.	5W-2860	[1]	RING-RETAINING
30.	118-2732	[1]	FITTING-GREASE
31.	221-3541 J	[2]	RING-BACKUP

			AVAILABLE REPAIR KIT(S):
	212-5684 J	[1]	KIT-SEAL (STABILIZER CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP42270283

278-7552: CYLINDER GP-STEERING

CYLINDER GP-STEERING

278-7552 CYLINDER GP-STEERING
S/N BDY20001-99999
PART OF 237-4540 AXLE GP-STEERING
ALSO AN ATTACHMENT

i02558337 SEBP4227

2787552 CYLINDER GP-STEERING Parts scheme

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	269-2422	[1]	ROD AS
2.	269-2423	[1]	GUIDE
3.	269-2424	[1]	RING
4.	269-2425	[1]	RING-RETAINING
5.	269-2427	[1]	RING-SNAP
6.	269-2428	[1]	FLANGE
7.	JZ	[2]	RING-GUIDE
8.	JZ	[1]	RING-PISTON
9.	JZ	[1]	SEAL-RING
10.	JZ	[2]	SEAL-ROD
11.	JZ	[2]	SEAL-SCRAPER
12.	JZ	[1]	SEAL-O-RING
13.	Z	[1]	CYLINDER AS

			AVAILABLE REPAIR KIT(S):
	269-2429 J	[1]	KIT-SEAL (STEERING CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	Z		NOT SERVICED SEPARATELY

#SEBP42270284

183-9003: CYLINDER GP-STICK

CYLINDER GP-STICK

183-9003 CYLINDER GP-STICK
S/N BDY2001-99999
140-MM (5.5-IN) BORE X 1408-MM (55.4-IN) STROKE
PART OF 183-9026 CYLINDER & SEAL GP-STICK
AN ATTACHMENT

i01660573 SEBP4227

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	198-7258	[1]	HEAD
2.	183-9007	[1]	CYLINDER AS
2A.	128-3031	[1]	BUSHING
3.	296-3258	[1]	ROD & BEARING AS-CYLINDER
3A.	128-3031	[1]	BUSHING
4.	087-5431	[1]	STOP
5.	087-5436 J	[1]	RING-BACKUP
6.	093-1572	[1]	RING-RETAINING
7.	095-0929	[2]	RING-RETAINING
8.	095-1632 J	[1]	SEAL-O-RING
9.	216-0005 J	[1]	SEAL-U-CUP
10.	096-2665 J	[1]	RING-BACKUP
11.	103-8378	[1]	RING-RETAINING
12.	103-8379	[1]	RING
13.	103-8380	[1]	STOP
14.	114-0757	[1]	BUSHING
15.	170-9847 J	[1]	SEAL-BUFFER
16.	123-2060 M	[1]	LOCKNUT (M80X2-THD)
17.	158-9064	[1]	PISTON
18.	158-9065 J	[2]	RING
19.	165-9289 J	[1]	SEAL-LIP TYPE
20.	179-9667 J	[1]	RING
21.	6I-6787 J	[1]	RING-SEAL
22.	7Y-5215 M	[8]	BOLT-SOCKET HEAD (M24X3X90-MM)
23.	9X-3598 J	[1]	SEAL AS

			AVAILABLE REPAIR KIT(S):
	215-9985 J	[1]	KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP42270285

209-0200: CYLINDER GP-STICK

CYLINDER GP-STICK

209-0200 CYLINDER GP-STICK
S/N BDY2001-99999
120-MM (4.72-IN) BORE X 1305-MM (51.38-IN) STROKE
PART OF 209-0204 CYLINDER & SEAL GP-STICK
AN ATTACHMENT

i01849192 SEBP4227

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	147-5835 M	[1]	LOCKNUT-SPECIAL
2.	087-5507	[1]	STOP
3.	112-6418	[1]	HEAD
4.	165-9286 J	[1]	SEAL-LIP TYPE
5.	296-3259	[1]	ROD & BEARING AS-CYLINDER
5A.	209-0206	[1]	BUSHING
6.	209-0202	[1]	CYLINDER AS
6A.	147-5838	[1]	BUSHING
7.	170-9844 J	[1]	SEAL-BUFFER
8.	103-8441	[1]	RING-RETAINING
9.	103-8442	[1]	RING
10.	103-8443	[1]	STOP
11.	114-0756	[1]	BUSHING
12.	123-7724 J	[1]	SEAL-O-RING
13.	123-8614 J	[1]	RING-BACKUP
14.	158-9062	[1]	PISTON
15.	158-9063 J	[2]	RING
16.	170-9860 J	[1]	SEAL-U-CUP
17.	179-9674 J	[1]	RING
18.	6I-6786 J	[1]	RING-SEAL
19.	7Y-5116 J	[1]	RING
20.	7Y-5119	[1]	RING-RETAINING
21.	7Y-5216 M	[8]	BOLT-SOCKET HEAD (M20X2.5X80-MM)
22.	8T-4241	[2]	RING-RETAINING
23.	9X-3592 J	[1]	SEAL AS

			AVAILABLE REPAIR KIT(S):
	258-0500	[1]	KIT-SEAL (STICK CYLINDER)
	J		KIT MARKED J SERVICES PART(S) MARKED J
	M		METRIC PART

#SEBP42270286

111-1858: DRIVE GP-SWING

DRIVE GP-SWING

111-1858 DRIVE GP-SWING
S/N BDY2001-99999
PART OF 217-9570 CHASSIS AR

i01230526 SEBP4227

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	368-2783 Y	[1]	MOTOR GP-SWING
2.	152-7372 Y	[1]	DRIVE GP-SWING
3.	108-1781 M	[4]	BOLT-SOCKET HEAD (M12X1.75X35-MM)
4.	113-2003 M	[16]	BOLT-SOCKET HEAD (M16X2X40-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42270287

152-7372: DRIVE GP-SWING

DRIVE GP-SWING

152-7372 DRIVE GP-SWING
S/N BDY2001-99999
PART OF 111-1858 DRIVE GP-SWING

i01224450 SEBP4227

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	155-0856	[1]	SHAFT
2.	155-0857	[3]	GEAR-PLANETARY (33-TEETH)
3.	155-0858	[1]	CARRIER
4.	155-0824	[3]	PIN
5.	082-3084	[6]	WASHER
6.	082-3085	[6]	WASHER
7.	132-4292	[63]	BEARING AS-NEEDLE
8.	095-0919	[3]	RING-RETAINING
9.	155-0864	[1]	HOUSING AS-SWING
10.	155-0865	[1]	SEAL-LIP TYPE
11.	155-0866	[1]	SEAL
12.	155-0867	[1]	PINION
13.	155-0868	[1]	WASHER (100X169X2-MM THK)
14.	155-0869	[1]	BEARING AS-ROLLER
15.	155-0870	[1]	BEARING AS-ROLLER
16.	179-3152	[2]	NUT-SLOTTED
17.	155-0872	[1]	RING
19.	155-0874	[1]	CARRIER-PLANETARY
20.	155-0875	[4]	GEAR-PLANETARY (32-TEETH)
21.	155-0876	[4]	BEARING AS-ROLLER
22.	9X-0656	[4]	RING
23.	8U-5005	[3]	SHIM (1-MM THK)
24.	095-0928	[1]	RING-RETAINING
25.	121-8088	[2]	BALL BEARING
26.	155-0877	[1]	GEAR-SUN (19-TEETH)
27.	098-2982 B	[4]	SHIM (1.5-MM THK)
28.	110-4737	[2]	RING-RETAINING
29.	155-0878	[1]	HOUSING-BRAKE
30.	155-0849	[1]	ORIFICE
31.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
32.	222-5793	[1]	SEAL-O-RING
33.	155-0850	[1]	PISTON
34.	155-0851	[1]	SEAL-LIP TYPE
35.	155-0852	[1]	SEAL-LIP TYPE
36.	179-3151	[1]	SPRING
37.	179-3154	[1]	SHIM (3.5-MM THK)
38.	132-4268 B	[5]	DISC-CLUTCH (1.7-MM THK)
39.	132-4262 B	[6]	DISC-CLUTCH (1.4-MM THK)
40.	132-4263 B	[1]	DISC-CLUTCH (1.2-MM THK)
41.	132-4265 B	[1]	DISC-CLUTCH (1.6-MM THK)
42.	132-4266 B	[1]	DISC-CLUTCH (1.8-MM THK)
43.	9X-6574	[1]	RING-RETAINING
44.	155-0855	[1]	SLEEVE
45.	8T-0707	[1]	RING-RETAINING (INTERNAL)
46.	222-5792	[1]	SEAL-O-RING
47.	197-6054	[1]	WASHER (63.6X70X0.5-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP42270288

109-7288: FILTER GP-OIL

FILTER GP-OIL

109-7288 FILTER GP-OIL -HYDRAULIC, SWING CIRCUIT
S/N BDY2001-99999
PART OF 188-7588 LINES GP-SWING MOTOR

i00492621 SEBP4227

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	124-3598	[1]	BASE-FILTER
2.	117-1495	[1]	SEAL-O-RING
3.	117-0951	[1]	HOUSING
4.	361-7480	[1]	FILTER ELEMENT-OIL (ADVANCED EFFICIENCY)(SWING CIRCUIT)

#SEBP42270289

145-7750: FILTER GP-OIL

FILTER GP-OIL

145-7750 FILTER GP-OIL -HYDRAULIC, PILOT
S/N BDY2001-99999
PART OF 249-7528 LINES GP-PILOT

i00558524 SEBP4227

For full view, you need register

Parts for your M322C WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4J-0526	[1]	SEAL-O-RING
2.	109-7289	[1]	FILTER ELEMENT AS-OIL (STANDARD EFFICIENCY)(HYDRAULIC, PILOT)
3.	149-6246	[1]	HOUSING

Information:

HYDRAULIC SYSTEM

CYLINDER GP

Operation and Maintenance Manual

Oscillating Axle Control
M316C, M318C and M322C Excavators and M318C MH and M322C MH Material Handlers

Boom Dampening Control - If Equipped
M316C, M318C and M322C Excavators and M318C and M322C Material Handlers

Special Instruction

Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}

Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}

Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}

Technical Information Bulletin

The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}

Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}

Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}

Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}

Outrigger and Dozer Blade Cylinders Leak on M313 Through M325 Wheeled Excavator and Wheeled Material Handlers{5102, 5468}
Outrigger and Dozer Blade Cylinders Leak on M313 Through M325 Wheeled Excavator and Wheeled Material Handlers{5102, 5468}

Specifications

Bucket Cylinder
M322C Excavator (Material Handler) Machine System

Boom Cylinder
M322C Excavator (Material Handler) Machine System

Stick Cylinder
M322C Excavator (Material Handler) Machine System

Stabilizer Cylinders
M322C Excavator (Material Handler) Machine System

Stick Cylinder - Material Handler
M322C Excavator (Material Handler) Machine System

Blade Lift Cylinder
M322C Excavator (Material Handler) Machine System

Axle Oscillation Lock Cylinder
M322C Excavator (Material Handler) Machine System

Tool Operating Manual

Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}

1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}

Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}

Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}

Systems Operation

Cylinders (Boom, Bucket, Stick and VA Boom)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System

Steering Cylinder
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Excavators Hydraulic System

Boom Dampening System
M322C Excavator Hydraulic System

Cylinders (Boom, Bucket, Stick and VA Boom)
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System

Steering Cylinder
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System

Boom Dampening System
M313C, M315C, M316C, M318C, M322C, M318C MH and M322C MH Wheeled Excavators Hydraulic System

Reuse And Salvage Guidelines

Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}

Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}

Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}

Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}

HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}

Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}

Testing and Adjusting

Axle Stabilizer Cylinder Air - Purge
M322C Excavator Hydraulic System

Cylinder Speed - Check
M322C Excavator Hydraulic System

Cylinder Drift - Check
M322C Excavator Hydraulic System

Axle Oscillation Lock Cylinder Air - Purge
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System

Cylinder Drift - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System

Cylinder Speed - Check
M313C, M315C, M316C, M318C and M322C Excavators and M318C and M322C Material Handlers Hydraulic System

Disassembly and Assembly

Cab Riser Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems

Stick Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems

Boom Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems

Steering Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems

Stabilizer Cylinder - Remove and Install
M318C and M322C Excavators Machine Systems

Service Magazine

Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08

New Check Valves are Now Used on the Oscillating Axle on Excavators {5468}
2008/03/24

Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04

Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2011/10/17

Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16

A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog M322C :

296-3228 CYLINDER GP-BOOM

183-9002 CYLINDER GP-BOOM

183-9001 CYLINDER GP-BOOM

183-9000 CYLINDER GP-BOOM

252-7310 CYLINDER GP-BLADE

226-3699 CYLINDER GP-AXLE OSC LOCK

216-4205 CYLINDER GP-ADJ CAB RISER

209-0204 CYLINDER & SEAL GP-STICK

185-1736 CYLINDER GP-BUCKET

198-4694 CYLINDER GP-STABILIZER

278-7552 CYLINDER GP-STEERING

183-9003 CYLINDER GP-STICK

209-0200 CYLINDER GP-STICK

111-1858 DRIVE GP-SWING

152-7372 DRIVE GP-SWING

109-7288 FILTER GP-OIL

Truck sale:

USD $50,526

2005 CAT M322C

d&h concrete services ltd

USD $39,000

2004 CAT M322C

MILTON CAT
SYRACUSE, New York

USD $59,000

2006 CAT M322C

BTM MACHINERY
Georgia

$39,000 USD

CATERPILLAR M322C 2004
- WHEEL EXCAVATORS
MILTON CAT
100 Quarry Drive - MILFORD - Massachus

Call

2004 CAT M322C

COFESER
Ponferrada, LEON, Spain 24400