FRAME AND BODY
FRAME GPHITCH GP
HOOD GP
LADDER GP
FRAME AND BODY
FRAME GP
#SEBP42750640
277-5782: HARDWARE GP-LOADER FRAME
277-5782 HARDWARE GP-LOADER FRAME -LIFT ARM GREASE LINE GUARDS
S/N MHG1-UP
PART OF 329-6624 LOGGING AR
S/N MHG1-UP
PART OF 329-6624 LOGGING AR
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9R-2821 M | [4] | BOSS (M10X1.5X15-MM) | |
| M | METRIC PART | |||
#SEBP42750641
249-1265: HARDWARE GP-REAR FRAME
249-1265 HARDWARE GP-REAR FRAME -AXLE OIL COOLER
S/N MHG1-528
PART OF 233-9749, 233-9750 COOLER AR-AXLE OIL
S/N MHG1-528
PART OF 233-9749, 233-9750 COOLER AR-AXLE OIL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750642
249-1265: HARDWARE GP-REAR FRAME
249-1265 HARDWARE GP-REAR FRAME -AXLE OIL COOLER
S/N MHG529-UP
PART OF 233-9749, 233-9750 COOLER AR-AXLE OIL
S/N MHG529-UP
PART OF 233-9749, 233-9750 COOLER AR-AXLE OIL
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-9117 C | [1] | BAR | |
| 2. | 8C-8499 CM | [1] | BOSS-WELD (M10X1.5X50-MM) | |
| 3. | 8T-3851 CM | [3] | BOSS-WELD (M10X1.5X17.5-MM) | |
| 4. | 8T-4935 CM | [1] | BOSS-WELD (M10X1.5X45-MM) | |
| 5. | 9C-7929 C | [1] | BLOCK | |
| 6. | 9T-6943 M | [2] | BLOCK (M10X1.5-MM) | |
| 7. | 9U-0853 | [2] | BAR | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP42750643
258-7063: HARDWARE GP-REAR FRAME
258-7063 HARDWARE GP-REAR FRAME
S/N MHG1-UP
PART OF 263-7275 SUPPRESSION AR-SOUND
S/N MHG1-UP
PART OF 263-7275 SUPPRESSION AR-SOUND
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS#SEBP42750644
110-8050: HITCH GP-ARTICULATING
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7G-8839 | [1] | SPACER (13.5X57X6-MM THK) | |
| 2. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 3. | 115-2955 | [1] | PIN AS | |
| 4. | 4V-1901 | [2] | BUSHING | |
| 5. | 7X-2549 M | [6] | BOLT (M12X1.75X100-MM) | |
| 6. | 8T-4223 | [16] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 1V-8852 | [1] | CAP | |
| 8. | 1V-8848 B | [1] | SHIM PACK (INCLUDES 20-SHIMS) | |
| 9. | 115-3183 | [1] | CAP | |
| 10. | 7D-8637 | [2] | CUP-BEARING | |
| 11. | 7D-8636 | [2] | CONE-BEARING | |
| 12. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 13. | 115-2958 | [1] | PIN-LOWER | |
| 14. | 8T-5092 M | [10] | BOLT (M12X1.75X150-MM) | |
| 15. | 5K-3501 | [1] | CAP-UPPER | |
| 16. | 5K-3492 B | [1] | SHIM PACK (INCLUDES 19-SHIMS) | |
| 17. | 115-3184 | [1] | CAP-LOWER | |
| 18. | 5K-3489 B | [1] | SHIM PACK (INCLUDES 18-SHIMS) | |
| 19. | 131-6096 | [1] | PLATE-LOCK | |
| 20. | 173-9779 M | [2] | BOLT (M24X3X80-MM) | |
| 21. | 6V-8237 | [2] | WASHER (26X44X4-MM THK) | |
| 22. | 125-2207 M | [8] | BOLT (M12X1.75X40-MM) | |
| 23. | 3K-6454 | [2] | SEAL-LIP TYPE (REAR FRAME) | |
| 24. | 5K-3491 | [1] | SPACER-SPECIAL | |
| 25. | 1J-2860 | [2] | CUP-BEARING | |
| 26. | 1J-4757 | [2] | CONE-BEARING | |
| 27. | 5K-3490 | [1] | SPACER | |
| 28. | 6H-3999 | [2] | SEAL-LIP TYPE (FRONT FRAME) | |
| 29. | 5P-8245 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP42750645
234-9757: HOOD & GUARD GP
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-6716 | [6] | RIVET-POP | |
| 2. | 4E-1384 | [2] | BUMPER-CONICAL | |
| 3. | 125-7037 | [1] | INSERT | |
| 4. | 131-1586 | [2] | ROD AS | |
| (EACH INCLUDES) | ||||
| 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | ||
| 5. | 257-5702 | [1] | SUPPORT AS | |
| 8T-3490 M | [22] | NUT-WELD (M10X1.5-THD) | ||
| 9R-2613 M | [6] | BOSS-WELD (M10X1.5X25-MM) | ||
| 103-0280 | [4] | SPACER (13X20X7-MM THK) | ||
| 115-4968 | [4] | BUSHING | ||
| 239-6320 | [1] | ANGLE | ||
| 6. | 234-9599 Y | [1] | GRILL GP-RADIATOR | |
| 7. | 234-9758 Y | [1] | PANEL GP-TOP (HOOD) | |
| 8. | 234-9762 Y | [1] | PANEL GP-SOUND SUPPRESSION (HOOD SIDE, LH) | |
| 9. | 234-9766 Y | [1] | PANEL GP-SOUND SUPPRESSION (HOOD SIDE, RH) | |
| 10. | 234-9770 | [1] | DOOR AS-ACCESS (HOOD, LH)(LH) | |
| 11. | 234-9771 | [1] | DOOR AS-ACCESS (HOOD, RH)(RH) | |
| (EACH DOOR AS INCLUDES) | ||||
| 11A. | 6V-4604 | [1] | RIVET-POP | |
| 11B. | 9V-1820 | [1] | SPACER | |
| 11C. | 119-0281 | [3] | HINGE AS | |
| (EACH INCLUDES) | ||||
| 8T-5413 M | [2] | STUD-WELD (M10X1.5X25-MM) | ||
| 11D. | 233-4463 | [1] | CAM | |
| 11E. | 233-4466 | [1] | LATCH AS | |
| 9V-1777 | [1] | CABLE | ||
| 12. | 234-9772 | [1] | GRILL AS (TOP) | |
| 13. | 251-6313 | [1] | TUBE | |
| 14. | 237-4986 | [1] | PIPE AS-EXTENSION | |
| 237-4987 | [1] | CLAMP AS | ||
| 15. | 238-7785 | [1] | BRACKET AS (RH) | |
| 16. | 238-7786 | [1] | BRACKET AS (LH) | |
| 17. | 238-7830 | [2] | BRACKET | |
| 18. | 239-8410 | [2] | PLATE | |
| 19. | 247-5547 | [1] | SEAL | |
| 20. | 251-4371 | [2] | STRIP-SEAL | |
| 21. | 251-4373 | [2] | SEAL-LIP TYPE | |
| 23. | 3B-4611 | [2] | PIN-COTTER | |
| 24. | 4M-7470 | [6] | GROMMET | |
| 25. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 26. | 7X-7729 | [54] | WASHER (11X25X3-MM THK) | |
| 27. | 8T-4121 | [56] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 M | [28] | NUT (M10X1.5-THD) | |
| 29. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4196 M | [76] | BOLT (M10X1.5X35-MM) | |
| 31. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 32. | 120-5281 E | [2] | SEAL (108-CM EACH) | |
| 33. | 5P-7211 D | SEAL (0.5-M) | ||
| 34. | 247-5838 E | SEAL (100-CM) | ||
| 35. | 246-0435 E | SEAL (140-CM) | ||
| 36. | 255-9274 | [1] | PLATE | |
| 37. | 252-5185 | [1] | BRACKET | |
| 38. | 252-5184 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 39. | 163-7988 | [6] | BUMPER AS | |
| 40. | 112-9736 E | SEAL (212-CM) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42750646
234-9757: HOOD & GUARD GP
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-6716 | [6] | RIVET-POP | |
| 2. | 4E-1384 | [2] | BUMPER-CONICAL | |
| 3. | 125-7037 | [1] | INSERT | |
| 4. | 131-1586 | [2] | ROD AS | |
| (EACH INCLUDES) | ||||
| 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | ||
| 5. | 257-5702 | [1] | SUPPORT AS | |
| 8T-3490 M | [22] | NUT-WELD (M10X1.5-THD) | ||
| 9R-2613 M | [6] | BOSS-WELD (M10X1.5X25-MM) | ||
| 103-0280 | [4] | SPACER (13X20X7-MM THK) | ||
| 115-4968 | [4] | BUSHING | ||
| 6. | 234-9599 Y | [1] | GRILL GP-RADIATOR | |
| 7. | 234-9758 Y | [1] | PANEL GP-TOP (HOOD) | |
| 8. | 234-9762 Y | [1] | PANEL GP-SOUND SUPPRESSION (HOOD SIDE, LH) | |
| 9. | 234-9766 Y | [1] | PANEL GP-SOUND SUPPRESSION (HOOD SIDE, RH) | |
| 10. | 295-2621 CY | [1] | DOOR GP-ACCESS (HOOD, LH) | |
| 11. | 295-2620 CY | [1] | DOOR GP-ACCESS | |
| 12. | 275-8309 C | [1] | GRILL AS (TOP) | |
| 13. | 251-6313 | [1] | TUBE | |
| 14. | 237-4986 | [1] | PIPE AS-EXTENSION | |
| 237-4987 | [1] | CLAMP AS | ||
| 15. | 238-7785 | [1] | BRACKET AS (RH) | |
| 16. | 238-7786 | [1] | BRACKET AS (LH) | |
| 17. | 238-7830 | [2] | BRACKET | |
| 18. | 239-8410 | [2] | PLATE | |
| 19. | 247-5547 | [1] | SEAL | |
| 20. | 251-4371 | [2] | STRIP-SEAL | |
| 21. | 251-4373 | [2] | SEAL-LIP TYPE | |
| 23. | 3B-4611 | [2] | PIN-COTTER | |
| 24. | 4M-7470 | [6] | GROMMET | |
| 25. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 26. | 7X-7729 | [54] | WASHER (11X25X3-MM THK) | |
| 27. | 8T-4121 | [56] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 M | [28] | NUT (M10X1.5-THD) | |
| 29. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4196 M | [76] | BOLT (M10X1.5X35-MM) | |
| 31. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 32. | 120-5281 E | SEAL (108-CM EACH) | ||
| 33. | 5P-7211 D | SEAL (0.075-M EACH) | ||
| 34. | 247-5838 E | SEAL (100-CM) | ||
| 35. | 246-0435 E | SEAL (140-CM) | ||
| 36. | 255-9274 | [1] | PLATE | |
| 37. | 252-5185 | [1] | BRACKET | |
| 38. | 252-5184 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 39. | 163-7988 | [6] | BUMPER AS | |
| 40. | 112-9736 E | SEAL (212-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42750647
234-9757: HOOD & GUARD GP
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-6716 | [6] | RIVET-POP | |
| 2. | 4E-1384 | [2] | BUMPER-CONICAL | |
| 3. | 125-7037 | [1] | INSERT | |
| 4. | 131-1586 | [2] | ROD AS | |
| 5. | 257-5702 | [1] | SUPPORT AS | |
| 8T-3490 M | [22] | NUT-WELD (M10X1.5-THD) | ||
| 9R-2613 M | [6] | BOSS-WELD (M10X1.5X25-MM) | ||
| 103-0280 | [4] | SPACER (13X20X7-MM THK) | ||
| 115-4968 | [4] | BUSHING | ||
| 6. | 292-3560 CY | [1] | GRILL GP-RADIATOR | |
| 7. | 234-9758 Y | [1] | PANEL GP-TOP (HOOD) | |
| 8. | 234-9762 Y | [1] | PANEL GP-SOUND SUPPRESSION (HOOD SIDE, LH) | |
| 9. | 234-9766 Y | [1] | PANEL GP-SOUND SUPPRESSION (HOOD SIDE, RH) | |
| 10. | 295-2621 Y | [1] | DOOR GP-ACCESS (HOOD, LH) | |
| 11. | 295-2620 Y | [1] | DOOR GP-ACCESS | |
| 12. | 275-8309 | [1] | GRILL AS (TOP) | |
| 13. | 251-6313 | [1] | TUBE | |
| 14. | 237-4986 | [1] | PIPE AS-EXTENSION | |
| 15. | 238-7785 | [1] | BRACKET AS (RH) | |
| 16. | 238-7786 | [1] | BRACKET AS (LH) | |
| 17. | 238-7830 | [2] | BRACKET | |
| 18. | 239-8410 | [2] | PLATE | |
| 19. | 247-5547 | [1] | SEAL | |
| 20. | 251-4371 | [2] | STRIP-SEAL | |
| 21. | 251-4373 | [1] | SEAL-LIP TYPE | |
| 23. | 3B-4611 | [2] | PIN-COTTER | |
| 24. | 4M-7470 | [6] | GROMMET | |
| 25. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 26. | 7X-7729 | [54] | WASHER (11X25X3-MM THK) | |
| 27. | 8T-4121 | [56] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 M | [28] | NUT (M10X1.5-THD) | |
| 29. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4196 M | [76] | BOLT (M10X1.5X35-MM) | |
| 31. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 32. | 120-5281 E | SEAL (108-CM EACH) | ||
| 33. | 308-9131 L | SEAL (75-MM EACH) | ||
| 34. | 247-5838 E | SEAL (100-CM) | ||
| 35. | 246-0435 E | SEAL (140-CM) | ||
| 36. | 255-9274 | [1] | PLATE | |
| 37. | 252-5185 | [1] | BRACKET | |
| 38. | 252-5184 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 39. | 163-7988 | [6] | BUMPER AS | |
| 40. | 300-7318 E | SEAL (212-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| L | ORDER BY THE MILLIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42750648
234-9757: HOOD & GUARD GP
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4D-6716 | [6] | RIVET-POP | |
| 2. | 4E-1384 | [2] | BUMPER-CONICAL | |
| 3. | 125-7037 | [1] | INSERT | |
| 4. | 131-1586 | [2] | ROD AS | |
| 5. | 257-5702 | [1] | SUPPORT AS | |
| 8T-3490 M | [22] | NUT-WELD (M10X1.5-THD) | ||
| 9R-2613 M | [6] | BOSS-WELD (M10X1.5X25-MM) | ||
| 103-0280 | [4] | SPACER (13X20X7-MM THK) | ||
| 115-4968 | [4] | BUSHING | ||
| 6. | 292-3560 Y | [1] | GRILL GP-RADIATOR | |
| 7. | 234-9758 Y | [1] | PANEL GP-TOP (HOOD) | |
| 8. | 234-9762 Y | [1] | PANEL GP-SOUND SUPPRESSION (HOOD SIDE, LH) | |
| 9. | 234-9766 Y | [1] | PANEL GP-SOUND SUPPRESSION (HOOD SIDE, RH) | |
| 10. | 295-2621 Y | [1] | DOOR GP-ACCESS (HOOD, LH) | |
| 11. | 295-2620 Y | [1] | DOOR GP-ACCESS | |
| 12. | 275-8309 | [1] | GRILL AS (TOP) | |
| 14. | 312-3148 C | [1] | TUBE AS | |
| 15. | 238-7785 | [1] | BRACKET AS (RH) | |
| 16. | 238-7786 | [1] | BRACKET AS (LH) | |
| 17. | 238-7830 | [2] | BRACKET | |
| 18. | 239-8410 | [2] | PLATE | |
| 19. | 247-5547 | [1] | SEAL | |
| 20. | 251-4371 | [2] | STRIP-SEAL | |
| 21. | 251-4373 | [1] | SEAL-LIP TYPE | |
| 23. | 3B-4611 | [2] | PIN-COTTER | |
| 24. | 4M-7470 | [6] | GROMMET | |
| 25. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 26. | 7X-7729 | [54] | WASHER (11X25X3-MM THK) | |
| 27. | 8T-4121 | [56] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4133 M | [28] | NUT (M10X1.5-THD) | |
| 29. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4196 M | [76] | BOLT (M10X1.5X35-MM) | |
| 31. | 9X-2044 M | [4] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 32. | 120-5281 E | SEAL (108-CM EACH) | ||
| 33. | 308-9131 L | SEAL (75-MM EACH) | ||
| 34. | 247-5838 E | SEAL (100-CM) | ||
| 35. | 246-0435 E | SEAL (140-CM) | ||
| 36. | 255-9274 | [1] | PLATE | |
| 37. | 252-5185 | [1] | BRACKET | |
| 38. | 252-5184 | [1] | BRACKET AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 39. | 163-7988 | [6] | BUMPER AS | |
| 40. | 300-7318 E | SEAL (212-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| L | ORDER BY THE MILLIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42750649
281-5460: LADDER GP
For full view, you need register
Parts for your 980H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 7W-8106 | [8] | SPACER (11.13X19.05X15-MM THK) | |
| 3. | 116-9894 I | [1] | HOSE AS | |
| 4. | 149-2847 | [1] | FITTING | |
| 5. | 149-2848 | [1] | COUPLING AS | |
| 6. | 153-6223 | [1] | PLUG-DUST | |
| 7. | 233-7221 | [3] | BRACKET | |
| 8. | 234-1530 | [1] | STEP AS | |
| 8T-3490 M | [4] | NUT-WELD (M10X1.5-THD) | ||
| 9. | 234-3545 | [4] | PLATE | |
| 10. | 244-1542 | [1] | PLUG-ORIFICE | |
| 11. | 254-4151 | [2] | ROLLER | |
| 12. | 254-4152 | [1] | CYLINDER | |
| 13. | 254-4154 | [2] | PLATE | |
| 14. | 254-4171 | [1] | PIN | |
| 15. | 254-4187 | [2] | PIN | |
| 16. | 254-4189 | [1] | BLOCK | |
| 17. | 254-4190 | [1] | PLATE | |
| 18. | 254-5257 | [1] | ELBOW | |
| 19. | 257-2259 | [1] | COVER AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 20. | 259-4506 | [1] | FILM-WARNING (CRUSH HAZARD)(HAND) | |
| 21. | 281-5461 | [1] | HANDRAIL AS | |
| 22. | 281-5462 | [1] | HANDRAIL AS | |
| 23. | 281-5465 | [1] | PLATE | |
| 24. | 281-5472 | [1] | PLATFORM AS | |
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 8T-3490 M | [19] | NUT-WELD (M10X1.5-THD) | ||
| 25. | 281-5498 | [1] | BRACKET AS | |
| 26. | 281-5504 | [1] | PLATE | |
| 27. | 282-3398 | [1] | BRACKET AS | |
| 107-6711 | [1] | BLOCK | ||
| 28. | 289-9465 Y | [1] | TANK GP-FUEL | |
| 29. | 291-2356 | [1] | PLATE | |
| 30. | 302-6795 | [1] | COVER | |
| 31. | 303-2112 | [1] | SPRING-GAS | |
| 32. | 306-2276 | [1] | LADDER AS | |
| 33. | 315-2036 | [1] | CABLE AS | |
| 34. | 315-2037 | [1] | HOOK | |
| 35. | 315-2038 | [2] | BLOCK | |
| 36. | 316-0393 | [2] | BEARING | |
| 37. | 320-9092 | [1] | ARM AS (LADDER) | |
| 38. | 095-0917 | [1] | RING-RETAINING | |
| 39. | 143-7685 | [1] | ADAPTER-SPECIAL | |
| 40. | 150-4050 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 8T-0788 | [1] | ELBOW | ||
| 41. | 3J-1907 | [1] | SEAL-O-RING | |
| 42. | 4J-5477 | [3] | SEAL-O-RING | |
| 43. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 44. | 5L-4035 | [2] | RING-RETAINING (EXTERNAL) | |
| 45. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 46. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 47. | 6D-3479 | [6] | CLIP (LOOP) | |
| 48. | 6V-7687 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 49. | 6V-8397 | [2] | SEAL-O-RING | |
| 50. | 6V-9836 | [1] | TEE-SWIVEL | |
| 51. | 7X-7729 | [3] | WASHER (11X25X3-MM THK) | |
| 52. | 8T-4121 | [57] | WASHER-HARD (11X21X2.5-MM THK) | |
| 53. | 8T-4136 M | [17] | BOLT (M10X1.5X25-MM) | |
| 54. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 55. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 56. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 57. | 8T-4185 M | [7] | BOLT (M10X1.5X50-MM) | |
| 58. | 8T-4186 M | [12] | BOLT (M10X1.5X40-MM) | |
| 59. | 8T-4191 M | [3] | BOLT (M10X1.5X16-MM) | |
| 60. | 8T-4195 M | [10] | BOLT (M10X1.5X30-MM) | |
| 61. | 8T-4196 M | [4] | BOLT (M10X1.5X35-MM) | |
| 62. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 63. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 64. | 8T-5005 M | [4] | BOLT (M10X1.5X70-MM) | |
| 65. | 8T-6466 M | [2] | BOLT (M10X1.5X60-MM) | |
| 66. | 8T-6974 M | [2] | BOLT (M6X1X80-MM) | |
| 67. | 9X-6165 | [6] | WASHER (6.5X22X2.5-MM THK) | |
| 68. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 69. | 255-7504 | [2] | SUPPORT-STEP (RUBBER) | |
| 70. | 7I-1024 | GUARD-HOSE (17-CM) | ||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
