HYDRAULIC SYSTEM
LINES GP-HYDRAULICLINES GP-CYLINDER
MOTOR GP
TANK GP
PUMP GP
HYDRAULIC SYSTEM
LINES GP-HYDRAULIC
#SEBP42750790
193-3980: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-3827 | [2] | BAR | |
| 2. | 3V-3828 | [4] | CLAMP | |
| 3. | 4E-8792 | [2] | CLAMP | |
| 4. | 5P-1296 E | HOSE (18-CM) | ||
| 5. | 8C-3451 | [1] | CAP-DUST (HYDRAULIC OIL) | |
| 6. | 9X-2201 | [2] | CLAMP-HOSE | |
| 7. | 115-9569 I | [1] | HOSE AS | |
| 8. | 115-9570 I | [1] | HOSE AS | |
| 9. | 125-0150 | [1] | TUBE AS | |
| 10. | 125-2208 M | [2] | STUD-TAPERLOCK (M16X2X145-MM) | |
| 11. | 167-1795 | [1] | ELBOW AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 8T-3491 | [1] | ELBOW | ||
| 12. | 175-4223 | [1] | TUBE AS | |
| 13. | 176-3898 | [1] | BLOCK | |
| 14. | 188-0239 | [1] | BRACKET AS | |
| 15. | 193-3984 | [1] | TUBE AS | |
| 16. | 220-0814 | [1] | VALVE-BREAKER RELIEF (HYDRAULIC TANK) | |
| 17. | 245-8226 | [1] | TUBE AS | |
| 18. | 245-8227 I | [1] | HOSE AS | |
| 19. | 245-8231 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 20. | 164-5590 | [1] | VALVE AS-FLUID SAMPLING (HYDRAULIC OIL) | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 8C-3446 | [1] | VALVE-SAMPLING (HYDRAULIC OIL) | ||
| 21. | 198-4777 | [2] | WASHER-HARD (11X25X10-MM THK) | |
| 22. | 1P-3705 | [3] | SEAL-RECTANGULAR | |
| 23. | 1P-3707 | [1] | SEAL-RECTANGULAR | |
| 24. | 1P-3708 | [1] | SEAL-RECTANGULAR | |
| 25. | 1P-4579 | [4] | FLANGE-HALF | |
| 26. | 1P-4582 | [2] | FLANGE-HALF | |
| 27. | 3D-2824 | [2] | SEAL-O-RING | |
| 28. | 4J-0524 | [2] | SEAL-O-RING | |
| 29. | 4J-0527 | [1] | SEAL-O-RING | |
| 30. | 5P-7470 | [1] | CLIP (SLOT) | |
| 31. | 5P-7471 | [1] | CLIP (TAB) | |
| 32. | 5P-7703 | [1] | GROMMET (52-MM ID) | |
| 33. | 5P-8077 | [6] | FLANGE-HALF | |
| 34. | 7S-8920 | [1] | CLIP (SLOT) | |
| 35. | 7S-8921 | [1] | CLIP (TAB) | |
| 36. | 7X-0507 | [3] | WASHER-HARD (12X22.5X5-MM THK) | |
| 37. | 7X-2543 M | [4] | BOLT (M10X1.5X120-MM) | |
| 38. | 7X-2549 M | [4] | BOLT (M12X1.75X100-MM) | |
| 39. | 7X-2556 M | [4] | BOLT (M16X2X100-MM) | |
| 40. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4132 M | [2] | NUT (M16X2-THD) | |
| 42. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4140 M | [12] | BOLT (M16X2X60-MM) | |
| 44. | 8T-4183 M | [16] | BOLT (M12X1.75X40-MM) | |
| 45. | 8T-4193 M | [4] | BOLT (M16X2X50-MM) | |
| 46. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 47. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 48. | 8T-4223 | [20] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 49. | 9M-2092 | [2] | SEAL-O-RING | |
| 50. | 9X-8257 | [22] | WASHER (17.5X30X3.5-MM THK) | |
| 51. | 3T-4965 | [1] | ADAPTER | |
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP42750791
193-3980: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-3827 | [2] | BAR | |
| 2. | 3V-3828 | [4] | CLAMP | |
| 3. | 4E-8792 | [2] | CLAMP | |
| 4. | 5P-1296 E | HOSE (18-CM) | ||
| 5. | 8C-3451 | [1] | CAP-DUST (HYDRAULIC OIL) | |
| 6. | 9X-2201 | [2] | CLAMP-HOSE | |
| 7. | 115-9569 I | [1] | HOSE AS | |
| 8. | 115-9570 I | [1] | HOSE AS | |
| 9. | 125-0150 | [1] | TUBE AS | |
| 10. | 125-2208 M | [2] | STUD-TAPERLOCK (M16X2X145-MM) | |
| 11. | 167-1795 | [1] | ELBOW AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 8T-3491 | [1] | ELBOW | ||
| 12. | 359-3198 C | [1] | TUBE AS | |
| 13. | 176-3898 | [1] | BLOCK | |
| 14. | 188-0239 | [1] | BRACKET AS | |
| 15. | 359-3199 C | [1] | TUBE AS | |
| 16. | 220-0814 | [1] | VALVE-BREAKER RELIEF (HYDRAULIC TANK) | |
| 17. | 245-8226 | [1] | TUBE AS | |
| 18. | 245-8227 I | [1] | HOSE AS | |
| 19. | 245-8231 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 20. | 164-5590 | [1] | VALVE AS-FLUID SAMPLING (HYDRAULIC OIL) | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 8C-3446 | [1] | VALVE-SAMPLING (HYDRAULIC OIL) | ||
| 21. | 198-4777 | [2] | WASHER-HARD (11X25X10-MM THK) | |
| 22. | 1P-3705 | [3] | SEAL-RECTANGULAR | |
| 23. | 1P-3707 | [1] | SEAL-RECTANGULAR | |
| 24. | 1P-3708 | [1] | SEAL-RECTANGULAR | |
| 25. | 1P-4579 | [4] | FLANGE-HALF | |
| 26. | 1P-4582 | [2] | FLANGE-HALF | |
| 27. | 3D-2824 C | [1] | SEAL-O-RING | |
| 28. | 4J-0524 | [2] | SEAL-O-RING | |
| 29. | 4J-0527 | [1] | SEAL-O-RING | |
| 30. | 5P-7470 | [1] | CLIP (SLOT) | |
| 31. | 5P-7471 | [1] | CLIP (TAB) | |
| 32. | 5P-7703 | [1] | GROMMET (52-MM ID) | |
| 33. | 5P-8077 | [6] | FLANGE-HALF | |
| 34. | 7S-8920 | [1] | CLIP (SLOT) | |
| 35. | 7S-8921 | [1] | CLIP (TAB) | |
| 36. | 7X-0507 | [3] | WASHER-HARD (12X22.5X5-MM THK) | |
| 37. | 7X-2543 M | [4] | BOLT (M10X1.5X120-MM) | |
| 38. | 7X-2549 M | [4] | BOLT (M12X1.75X100-MM) | |
| 39. | 7X-2556 M | [4] | BOLT (M16X2X100-MM) | |
| 40. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4132 M | [2] | NUT (M16X2-THD) | |
| 42. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 43. | 8T-4140 M | [12] | BOLT (M16X2X60-MM) | |
| 44. | 8T-4183 M | [16] | BOLT (M12X1.75X40-MM) | |
| 45. | 8T-4193 M | [4] | BOLT (M16X2X50-MM) | |
| 46. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 47. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 48. | 8T-4223 | [20] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 49. | 9M-2092 | [2] | SEAL-O-RING | |
| 50. | 9X-8257 | [22] | WASHER (17.5X30X3.5-MM THK) | |
| 51. | 148-8312 C | [1] | ADAPTER AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 3T-4965 | [1] | ADAPTER | ||
| 52. | 8T-9379 C | [2] | BOLT (3/8-16X4.25-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP42750792
434-2610: LINES GP-IMPLEMENT
434-2610 LINES GP-IMPLEMENT
S/N MHG1-UP
S/N MHG1-UP
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6W-2888 | [2] | FITTING AS (QUICK DISCONNECT, MALE) | |
| 2. | 6W-2890 | [2] | CAP AS-DUST | |
| 3. | 150-5430 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 163-3343 | [1] | SEAL | ||
| 4. | 151-2184 | [2] | PLATE-BRACKET | |
| 5. | 432-0175 I | [2] | HOSE AS | |
| 6. | 2P-1293 | [2] | LOCKNUT (1-3/16-12-THD) | |
| 7. | 4J-0522 | [2] | SEAL-O-RING | |
| 8. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 9. | 8T-4244 M | [4] | NUT (M12X1.75-THD) | |
| 10. | 8T-4910 M | [4] | BOLT (M12X1.75X60-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP42750793
110-8144: LINES GP-LIFT CYLINDER
110-8144 LINES GP-LIFT CYLINDER
S/N MHG1-UP
PART OF 235-1303 HYDRAULIC AR-2 VALVE
S/N MHG1-UP
PART OF 235-1303 HYDRAULIC AR-2 VALVE
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 2. | 1P-3705 | [2] | SEAL-RECTANGULAR | |
| 3. | 334-1022 I | [1] | HOSE AS | |
| 4. | 334-1023 I | [1] | HOSE AS | |
| 5. | 337-6882 I | [1] | HOSE AS | |
| 6. | 337-6883 I | [1] | HOSE AS | |
| 7. | 3V-7279 | [2] | ANGLE | |
| 8. | 4J-0520 | [14] | SEAL-O-RING | |
| 9. | 4J-0522 | [2] | SEAL-O-RING | |
| 10. | 6V-3240 | [2] | SEAL-RECTANGULAR | |
| 11. | 7S-8920 | [2] | CLIP (SLOT) | |
| 12. | 7S-8921 | [2] | CLIP (TAB) | |
| 13. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 14. | 7X-3392 | [8] | WASHER-HARD (13.5X22.5X3-MM THK) | |
| 15. | 336-7236 | [1] | TUBE AS | |
| 16. | 336-7237 | [1] | TUBE AS | |
| 17. | 114-4831 | [2] | PLATE | |
| 18. | 335-8829 | [2] | BRACKET AS | |
| 19. | 226-7659 C | [1] | TUBE AS (RH) | |
| 20. | 226-7661 C | [1] | TUBE AS (LH) | |
| 21. | 162-9742 I | [2] | HOSE AS | |
| 22. | 162-9743 I | [2] | HOSE AS | |
| 23. | 171-5319 | [1] | BRACKET (RH) | |
| 24. | 6V-0397 | [4] | FLANGE-HALF | |
| 25. | 8C-3206 | [28] | FLANGE-HALF | |
| 26. | 8T-4121 | [52] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 28. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 29. | 8T-4182 M | [8] | BOLT (M10X1.5X45-MM) | |
| 30. | 8T-4184 M | [12] | BOLT (M12X1.75X45-MM) | |
| 31. | 8T-4196 M | [50] | BOLT (M10X1.5X35-MM) | |
| 32. | 8T-4223 | [20] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 34. | 8T-5005 M | [8] | BOLT (M10X1.5X70-MM) | |
| 35. | 8T-5041 M | [8] | BOLT (M12X1.75X120-MM) | |
| 36. | 171-5320 | [1] | BRACKET (LH) | |
| 37. | 8T-7934 | [16] | WASHER-HARD (11X21X5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP42750794
110-8141: LINES GP-TILT CYLINDER
110-8141 LINES GP-TILT CYLINDER
S/N MHG1-UP
PART OF 235-1303 HYDRAULIC AR-2 VALVE
S/N MHG1-UP
PART OF 235-1303 HYDRAULIC AR-2 VALVE
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-3704 | [2] | SEAL-RECTANGULAR | |
| 3. | 4J-0520 | [6] | SEAL-O-RING | |
| 4. | 4J-0522 | [6] | SEAL-O-RING | |
| 5. | 148-8407 | [2] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-4191 | [1] | PLUG (9/16-18-THD) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 7. | 116-2152 | [1] | TUBE AS | |
| 8. | 116-2153 | [1] | TUBE AS | |
| 9. | 116-2155 | [1] | MANIFOLD | |
| 10. | 122-9963 I | [2] | HOSE AS | |
| 11. | 122-9964 I | [1] | HOSE AS | |
| 12. | 122-9965 I | [1] | HOSE AS | |
| 13. | 123-0305 | [2] | BRACKET | |
| 14. | 203-0187 I | [2] | HOSE AS | |
| 15. | 6V-0397 | [12] | FLANGE-HALF | |
| 16. | 8C-3206 | [12] | FLANGE-HALF | |
| 17. | 8T-4121 | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 18. | 8T-4183 M | [24] | BOLT (M12X1.75X40-MM) | |
| 19. | 8T-4192 M | [8] | BOLT (M12X1.75X25-MM) | |
| 20. | 8T-4196 M | [24] | BOLT (M10X1.5X35-MM) | |
| 21. | 8T-4223 | [32] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-4910 M | [2] | BOLT (M12X1.75X60-MM) | |
| 23. | 8T-5001 M | [1] | BOLT (M12X1.75X130-MM) | |
| 24. | 8T-5005 M | [8] | BOLT (M10X1.5X70-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP42750795
255-6805: MOTOR GP-PISTON
255-6805 MOTOR GP-PISTON -HYDRAULIC FAN
S/N MHG1-UP
PART OF 232-3321 RADIATOR & FAN GP
S/N MHG1-UP
PART OF 232-3321 RADIATOR & FAN GP
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 185-0248 | [1] | SEAL-OIL | |
| 2. | 9S-8006 | [1] | PLUG (7/8-14-THD) | |
| 3. | 2M-9780 | [1] | SEAL-O-RING | |
| 4. | 242-3373 | [1] | SWASHPLATE | |
| 5. | 256-7858 Y | [1] | ROTATING GP-MOTOR | |
| 6. | 127-9485 | [1] | SEAL-O-RING | |
| 7. | 095-0690 M | [4] | BOLT-SOCKET HEAD (M14X2X60-MM) | |
| 8. | 8C-3110 | [1] | RING-RETAINING | |
| 9. | 204-2799 | [1] | DOWEL | |
| 10. | 101-2862 | [2] | DOWEL | |
| 11. | 185-0263 | [1] | BEARING | |
| 12. | 185-0242 | [1] | PLATE | |
| 13. | 242-3377 | [1] | SHAFT-DRIVE | |
| 14. | 189-4717 | [1] | BEARING | |
| 105-3035 | [1] | CONE-BEARING | ||
| 203-8609 | [1] | CUP-BEARING | ||
| 15. | 127-9483 | [1] | SHIM (PRELOAD) | |
| 16. | 197-2471 | [1] | PLUG AS | |
| 197-2472 | [1] | SEAL | ||
| 17. | 197-2474 | [1] | VALVE AS | |
| 18. | 242-3374 | [1] | SLEEVE | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42750796
110-8145: MOUNTING GP-HYDRAULIC TANK
110-8145 MOUNTING GP-HYDRAULIC TANK
S/N MHG1-UP
PART OF 235-1303 HYDRAULIC AR-2 VALVE
S/N MHG1-UP
PART OF 235-1303 HYDRAULIC AR-2 VALVE
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-4649 | [2] | SPACER (0.516X1X1-IN THK) | |
| 2. | 2Q-7979 | [1] | BRACKET AS | |
| 3. | 114-6656 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 4. | 8T-4139 M | [3] | BOLT (M12X1.75X30-MM) | |
| 5. | 8T-4183 M | [8] | BOLT (M12X1.75X40-MM) | |
| 6. | 8T-4223 | [13] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 8T-4648 M | [1] | BOLT (M12X1.75X70-MM) | |
| 8. | 8T-6868 M | [1] | BOLT (M12X1.75X80-MM) | |
| M | METRIC PART | |||
#SEBP42750797
235-5335: PUMP & MOTOR GP-HOOD TILT
235-5335 PUMP & MOTOR GP-HOOD TILT
S/N MHG1-718
PART OF 235-5334 TILT GP-HOOD
S/N MHG1-718
PART OF 235-5334 TILT GP-HOOD
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 209-2627 | [1] | KIT-SEAL (HAND PUMP) | |
| 2. | 235-5338 | [1] | PUMP (HOOD TILT, MANUAL OPERATION) | |
| 3. | 290-1004 | [1] | KIT-HYDRAULIC TANK (HOOD TILT) | |
| 4. | 236-8932 | [1] | SOLENOID | |
| 5. | 236-8933 | [1] | SWITCH-START (HOOD TILT) | |
| 6. | 236-8935 | [1] | MOTOR (HOOD TILT) | |
| 7. | 236-8936 | [1] | PUMP | |
| 8. | 236-8938 | [1] | MANIFOLD-VALVE (HOOD TILT) | |
| 9. | 265-3423 | [1] | FILLER GP-HYDRAULIC OIL (HOOD TILT) |
#SEBP42750798
307-0676: PUMP & MOTOR GP-HOOD TILT
307-0676 PUMP & MOTOR GP-HOOD TILT
S/N MHG719-UP
PART OF 235-5334 TILT GP-HOOD
S/N MHG719-UP
PART OF 235-5334 TILT GP-HOOD
For full view, you need register
Parts for your 980H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 209-2627 | [1] | KIT-SEAL (HAND PUMP) | |
| (INCLUDES O-RINGS & BACK-UP RINGS) | ||||
| 2. | 235-5338 | [1] | PUMP (HOOD TILT, MANUAL OPERATION) | |
| 3. | 236-8932 | [1] | SOLENOID (HOOD TILT ACTUATOR) | |
| 4. | 373-8155 | [1] | SWITCH-START (HOOD TILT) | |
| 5. | 236-8936 | [1] | PUMP | |
| 6. | 236-8938 | [1] | MANIFOLD-VALVE (HOOD TILT) | |
| 7. | 265-3423 | [1] | FILLER GP-HYDRAULIC OIL (HOOD TILT) | |
| 8. | 290-1004 | [1] | KIT-HYDRAULIC TANK (HOOD TILT) | |
| (INCLUDES SCREWS, RESERVOIR, SEAL & MAGNET) | ||||
| 9. | 307-0675 | [1] | MOTOR (HOOD TILT) | |
| 10. | 316-8637 | [1] | GASKET | |
| 11. | 9X-1813 E | SLEEVE (31-CM) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 347-1003 | [1] | KIT-RESERVOIR | ||
| (INCLUDES SCREWS, RESERVOIR, BREATHERS & MAGNET) | ||||
| 347-1005 | [1] | KIT-MANIFOLD | ||
| (INCLUDES O-RINGS, STEEL PLUGS, MINIFOLD BLOCK & SCREWS) | ||||
| 347-1006 | [1] | KIT-SEAL | ||
| (INCLUDES O-RINGS, SHAFT SEAL & GASKETS) | ||||
| 347-1008 | [1] | KIT-CHECK VALVE | ||
| (INCLUDES O-RINGS & BACK-UP RINGS) | ||||
| 347-1010 | [1] | KIT-CHECK VALVE | ||
| (INCLUDES O-RINGS & BACK-UP RINGS) | ||||
| 347-1012 | [1] | KIT-SOLENOID | ||
| (INCLUDES SOLENOID SEAL) | ||||
| 347-1014 | [1] | KIT-ADAPTER | ||
| (INCLUDES SCREWS, CHECK VALVE, ADAPTOR, STEEL PLUG, RELIEF VALVE SEAT, O-RINGS, RETAINER, RETAINING RING & WASHER) | ||||
| E | ORDER BY THE CENTIMETER | |||
#SEBP42750799
235-5333: PUMP & MTG GP-HYDRAULIC FAN
235-5333 PUMP & MTG GP-HYDRAULIC FAN
S/N MHG1-UP
PART OF 235-1303 HYDRAULIC AR-2 VALVE
S/N MHG1-UP
PART OF 235-1303 HYDRAULIC AR-2 VALVE
For full view, you need register
