ELECTRICAL AND STARTING SYSTEM
WIRING GPSTARTING AID GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP42830440
324-0696: WIRING GP-ENGINE
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 4P-5918 | [1] | CLIP | |
| 3. | 7K-1181 | [19] | STRAP-CABLE | |
| 4. | 154-6626 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 5. | 175-3244 | [1] | SWITCH AS-PRESSURE (SERVICE BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-6008 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M) | |||
| 8T-5677 D | SLEEVE (0.6-M) | |||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 204-2281 | [3] | STRAP-CABLE | |
| 7. | 194-6722 Y | [1] | SENSOR GP-PRESSURE (TURBOCHARGER INLET) | |
| 8. | 365-7504 | [1] | CABLE AS | |
| 9. | 256-6453 | [1] | SENSOR-TEMPERATURE (2-PIN)(TORQUE CONVERTER OIL) | |
| 10. | 272-6537 | [1] | BRACKET AS | |
| 8T-3490 M | [3] | NUT-WELD (M10X1.5-THD) | ||
| 11. | 324-0695 | [1] | HARNESS AS-ENGINE | |
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8N-1549 | [1] | SOCKET-CONNECTOR (4-GA) | ||
| 8T-8737 | [62] | PLUG-SEAL | ||
| 8T-8827 | [1] | BOOT (RED) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDESE RECEPTACLE AS & WEDGE) | ||||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 9X-3402 | [55] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [12] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 127-5483 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 131-1479 | [1] | TERMINAL AS | ||
| 144-1636 | [16] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [7] | KIT-CONNECTING PLUG (2-PIN) | ||
| 174-0503 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 1P-0810 B | [1] | TAPE-ELECTRICAL | ||
| 212-3553 | [1] | TERMINAL AS | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 240-7874 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 274-3780 | [1] | CAP-SEAL | ||
| 12. | 324-0697 | [1] | BRACKET AS | |
| 13. | 324-0698 | [1] | BRACKET AS | |
| 14. | 324-0701 | [1] | CABLE AS | |
| 3L-6513 | [1] | TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW) | ||
| 8C-3056 E | CABLE (2-GA, RED)(74-CM) | |||
| 8T-8827 | [1] | BOOT (RED) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 231-4476 | [1] | TERMINAL AS (DUAL HEAT) | ||
| 125-7876 E | [1] | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | ||
| 15. | 033-8248 | [2] | CLIP (LOOP) | |
| 16. | 124-1479 | [3] | CLIP | |
| 17. | 125-8797 | [2] | CLIP (SLOT) | |
| 18. | 130-5300 | [5] | CLIP | |
| 19. | 132-5789 | [2] | CLIP (LADDER) | |
| 20. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 21. | 142-8545 M | [3] | BOLT (M16X2X20-MM) | |
| 22. | 147-0385 | [1] | CLIP | |
| 23. | 149-9129 | [1] | CLIP (LOOP) | |
| 24. | 3J-1907 | [2] | SEAL-O-RING | |
| 25. | 3K-0360 | [1] | SEAL-O-RING | |
| 26. | 4P-7581 | [3] | CLIP (LADDER) | |
| 27. | 4P-7582 | [2] | CLIP (LADDER) | |
| 28. | 4P-8134 | [2] | CLIP (LADDER) | |
| 29. | 4S-1962 | [2] | CLIP (LOOP) | |
| 30. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 31. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 32. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 33. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 34. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 35. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 36. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 37. | 9X-8257 | [3] | WASHER (17.5X30X3.5-MM THK) | |
| 38. | 9X-7378 | [1] | SEAL-O-RING | |
| 39. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(AIR CONDITIONER) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 40. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 41. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42830441
330-6022: WIRING GP-ENGINE
330-6022 WIRING GP-ENGINE
S/N C7C15765-UP; KHX1-UP
PART OF 235-1424, 338-9078, 349-3584 ENGINE AR-COMPLETE
S/N C7C15765-UP; KHX1-UP
PART OF 235-1424, 338-9078, 349-3584 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [14] | STRAP-CABLE | |
| 2. | 4P-5918 | [1] | CLIP | |
| 3. | 206-1345 | [7] | STRAP-CABLE | |
| 4. | 222-5917 Y | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 5. | 381-2499 Y | [1] | HARNESS AS-WIRING (SENSOR) | |
| 6. | 352-3966 | [1] | CLIP (LADDER) | |
| 7. | 4P-8134 | [1] | CLIP (LADDER) | |
| 8. | 5P-7970 M | [1] | NUT (M8X1.25-THD) | |
| 9. | 6K-0806 | [2] | STRAP-CABLE | |
| 10. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| 11. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 12. | 5P-4116 J | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 13. | 6V-5217 JM | [1] | BOLT (M8X1.25X20-MM) | |
| 14. | 7X-7729 J | [1] | WASHER (11X25X3-MM THK) | |
| 15. | 8T-4191 JM | [1] | BOLT (M10X1.5X16-MM) | |
| 16. | 113-8690 J | [1] | WASHER (11.1X37.9X3.3-MM THK) | |
| 17. | 156-9890 J | [1] | WASHER (9X30X4-MM THK) | |
| J | SHIPPING & STORAGE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP42830442
263-6667: WIRING GP-ETHER STARTING AID
263-6667 WIRING GP-ETHER STARTING AID
S/N M3G1-541
PART OF 263-6353 STARTING AID AR-ETHER
S/N M3G1-541
PART OF 263-6353 STARTING AID AR-ETHER
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS#SEBP42830443
324-0678: WIRING GP-ETHER STARTING AID
324-0678 WIRING GP-ETHER STARTING AID
S/N M3G1-UP
PART OF 263-6353 STARTING AID AR-ETHER
S/N M3G1-UP
PART OF 263-6353 STARTING AID AR-ETHER
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 324-0677 | [1] | HARNESS AS-STARTING AID (ETHER) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH KIT INCLUDES A RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 9X-3402 | [1] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [1] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES A PLUG ASSEMBLY & WEDGE) | ||||
| 3. | 4P-7581 | [1] | CLIP (LADDER) | |
| 4. | 5P-9085 | [1] | CLIP (LOOP) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP42830444
241-0641: WIRING GP-FRONT
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4H-1225 | [6] | WASHER (11X22X6-MM THK) | |
| 2. | 5V-6152 | [2] | CLAMP | |
| 3. | 5V-6153 | [1] | PLATE-COVER | |
| 4. | 7K-1181 | [21] | STRAP-CABLE | |
| 5. | 241-5688 | [1] | HARNESS AS-FRONT CHASSIS | |
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| 110-6845 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 102-8802 | [7] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [4] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [14] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 6. | 130-5300 | [3] | CLIP | |
| 7. | 147-0385 | [3] | CLIP | |
| 8. | 1S-0994 | [4] | CLIP (LOOP) | |
| 9. | 4D-9517 | [1] | CLIP | |
| 10. | 4P-8134 | [3] | CLIP (LADDER) | |
| 11. | 5P-7464 | [2] | CLIP (SLOT) | |
| 12. | 5P-7465 | [1] | CLIP (TAB) | |
| 13. | 8M-2770 | [4] | CLIP (LOOP) | |
| 14. | 8T-4121 | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 16. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 19. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 20. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 8T-6974 M | [2] | BOLT (M6X1X80-MM) | |
| 22. | 9M-8406 | [2] | CLIP (LOOP) | |
| 23. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
#SEBP42830445
241-0641: WIRING GP-FRONT
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4H-1225 | [6] | WASHER (11X22X6-MM THK) | |
| 2. | 5V-6152 | [2] | CLAMP | |
| 3. | 5V-6153 | [1] | PLATE-COVER | |
| 4. | 7K-1181 C | [23] | STRAP-CABLE | |
| 5. | 241-5688 | [1] | HARNESS AS-FRONT CHASSIS | |
| 6. | 130-5300 | [3] | CLIP | |
| 7. | 147-0385 | [3] | CLIP | |
| 8. | 174-5907 C | [1] | CLIP (LOOP) | |
| 9. | 4D-9517 | [1] | CLIP | |
| 10. | 4K-8302 C | [3] | CLIP (LOOP) | |
| 11. | 4K-8864 C | [1] | CLIP (LOOP) | |
| 12. | 4P-7428 C | [1] | CLIP (LADDER) | |
| 13. | 4P-7429 C | [2] | CLIP (LADDER) | |
| 14. | 4S-5719 C | [2] | SPACER (10.31X25X12.7-MM THK) | |
| 15. | 5P-7464 C | [1] | CLIP (SLOT) | |
| 16. | 5P-7465 | [1] | CLIP (TAB) | |
| 17. | 8M-2770 | [4] | CLIP (LOOP) | |
| 18. | 8T-4121 C | [11] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 20. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 21. | 8T-4137 CM | [3] | BOLT (M10X1.5X20-MM) | |
| 22. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 23. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-6974 M | [2] | BOLT (M6X1X80-MM) | |
| 25. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP42830446
277-3174: WIRING GP-FRONT
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 5V-6152 | [2] | CLAMP | |
| 3. | 5V-6153 | [1] | PLATE-COVER | |
| 4. | 7K-1181 | [25] | STRAP-CABLE | |
| 5. | 193-3973 | [18] | STRAP-CABLE | |
| 6. | 204-8000 | [18] | MOUNTING-CABLE TIE | |
| 7. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 8. | 359-7162 | [1] | HARNESS AS-FRONT | |
| 9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(6-CM) | |||
| 346-0305 | [1] | BOOT | ||
| 274-3774 | [8] | CAP-CONNECTOR | ||
| 5P-1506 E | HOSE (69-CM) | |||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [16] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 126-1767 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1767 | [11] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| -OR- | ||||
| 9X-3401 | [11] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [18] | PLUG-SEAL | ||
| 110-6845 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 110-6844 | [1] | SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (360-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (60-CM) | |||
| 9X-3402 | [66] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 7K-1181 | [3] | STRAP-CABLE | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(20-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 9. | 130-5300 | [3] | CLIP | |
| 10. | 4P-7428 | [1] | CLIP (LADDER) | |
| 11. | 4P-7429 | [2] | CLIP (LADDER) | |
| 12. | 4S-5719 | [2] | SPACER (10.31X25X12.7-MM THK) | |
| 13. | 5P-7464 | [1] | CLIP (SLOT) | |
| 14. | 5P-7465 | [1] | CLIP (TAB) | |
| 15. | 8T-4121 | [21] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
| 17. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 18. | 8T-4137 M | [11] | BOLT (M10X1.5X20-MM) | |
| 19. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 20. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 21. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 22. | 8T-6974 M | [2] | BOLT (M6X1X80-MM) | |
| 23. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 24. | 132-5789 | [1] | CLIP (LADDER) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP42830447
271-4016: WIRING GP-LIGHTING
271-4016 WIRING GP-LIGHTING -LOADER FRAME
S/N M3G1-549
PART OF 237-4931 ELECTRICAL AR
S/N M3G1-549
PART OF 237-4931 ELECTRICAL AR
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS#SEBP42830448
271-4028: WIRING GP-LIGHTING
271-4028 WIRING GP-LIGHTING -LOADER FRAME
S/N M3G1-UP
PART OF 235-5279, 244-3599 LIGHTING AR-SIGNAL
S/N M3G1-UP
PART OF 235-5279, 244-3599 LIGHTING AR-SIGNAL
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 271-4029 | [1] | HARNESS AS-LIGHTING (LH) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 2. | 271-4030 | [1] | HARNESS AS-LIGHTING (RH) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
#SEBP42830449
271-4034: WIRING GP-LIGHTING
271-4034 WIRING GP-LIGHTING -HOOD
S/N M3G1-UP
PART OF 275-5865, 275-5866 LIGHTING AR-SIGNAL
S/N M3G1-UP
PART OF 275-5865, 275-5866 LIGHTING AR-SIGNAL
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-6878 | [4] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 2. | 033-8248 | [4] | CLIP (LOOP) | |
| 3. | 130-5300 | [4] | CLIP | |
| 4. | 271-4035 | [1] | HARNESS AS-LIGHTING (HOOD SIGNAL, LH) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 5. | 271-4036 | [1] | HARNESS AS-LIGHTING (HOOD SIGNAL, RH) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 6. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
