221-5010 LINES GP-STICK S/N MEM1-UP PART OF 228-8078, 257-4564 STICK AR-HOE FOR USE WITH 4.2-M (13.8-FT) STICK AN ATTACHMENT 365C

HYDRAULIC SYSTEM

LINES GP-STICK

0. 221-5010 LINES GP-S
1. 266-3467 LINES GP-S

LINES GP-CYLINDER

2. 153-8673 LINES GP-S
3. 165-3278 LINES GP-S

LINES GP-SWING

4. 255-1823 LINES GP-S
5. 255-1823 LINES GP-S

LINES GP-TRAVEL MOTOR

6. 227-0512 LINES GP-T
7. 260-7365 LINES GP-T

LINES GP-WORK TOOL

8. 216-9912 LINES GP-W

MANIFOLD GP

9. 194-0946 MANIFOLD &
0. INFORMATION

EXCAVATOR 365C EXCAVATOR MEM
365C L Excavator MEM00001-UP (MACHINE) POWERED BY C-15 Engine SEBP4289 365C MEM (2004)

HYDRAULIC SYSTEM

LINES GP-STICK

138-5256 LINES GP-STICK

138-5257 LINES GP-STICK

221-5010 LINES GP-STICK

266-3467 LINES GP-STICK

153-8673 LINES GP-STICK CYLINDER

165-3278 LINES GP-STICK CYLINDER

#SEBP42890660

221-5010: LINES GP-STICK

LINES GP-STICK

221-5010 LINES GP-STICK
S/N MEM1-UP
PART OF 228-8078, 257-4564 STICK AR-HOE
FOR USE WITH 4.2-M (13.8-FT) STICK
AN ATTACHMENT

i02114982 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	523-7004 I	[2]	HOSE AS
2.	451-2175	[16]	WASHER-HARD (17.5X30X3.5-MM THK)
3.	447-1707 M	[12]	BOLT (M16X2X60-MM)
4.	1P-3705	[4]	SEAL-RECTANGULAR
5.	5P-8077	[8]	FLANGE-HALF
6.	4I-0924	[1]	FLANGE
7.	453-2841 M	[4]	BOLT (M16X2X150-MM)
8.	1P-3706	[1]	SEAL-RECTANGULAR
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP42890661

266-3467: LINES GP-STICK

LINES GP-STICK

266-3467 LINES GP-STICK
S/N MEM1-UP
PART OF 266-9621 FRONT AR-LONG REACH
AN ATTACHMENT

i02991624 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	6H-3615	[2]	PLUG-PROTECTION
2.	7K-1181	[59]	STRAP-CABLE
3.	9F-2167	[2]	SCREW-PURGE (3/8-24X1.164-IN)
4.	124-1107	[7]	GROMMET
5.	129-5874	[7]	GROMMET
6.	138-5708	[14]	CLIP-HALF
7.	202-7001	[8]	CLIP
8.	203-8127	[2]	TUBE AS
9.	208-1246	[2]	MANIFOLD
10.	208-1773	[2]	FITTING GP-HYDRAULIC (QUICK DISCONNECT, MALE)
	208-4530	[1]	KIT-REPAIR (QUICK DISCONNECT, MALE)
11.	208-1774	[1]	FITTING GP-HYDRAULIC (QUICK DISCONNECT, FEMALE)
	208-4531	[1]	KIT-REPAIR (QUICK DISCONNECT, FEMALE)
12.	208-4532	[2]	CAP-DUST
13.	208-4546	[1]	CAP-DUST
14.	217-8057	[1]	GUARD AS
15.	221-8426	[1]	TUBE AS
16.	242-7338	[1]	TUBE AS
17.	242-7339	[2]	TUBE AS
18.	242-7340	[1]	TUBE AS
19.	244-6775 I	[1]	HOSE AS
20.	245-2090	[2]	TUBE AS
21.	271-2706 Y	[3]	VALVE GP-MANUAL (SHUTOFF)(STICK LINES)
22.	271-2708 Y	[1]	VALVE GP-MANUAL (SHUTOFF)(STICK LINES)
23.	274-4976 I	[1]	HOSE AS
24.	277-0954 BY	[1]	VALVE GP-MANUAL
25.	292-7752 B	[1]	VALVE AS-MANUAL (AUXILIARY, SHUTOFF)
26.	292-9843	[10]	GROMMET
27.	296-3879	[1]	TUBE AS
28.		[1]	TUBE AS
29.		[1]	TUBE AS
30.		[1]	TUBE AS
31.		[1]	TUBE AS
32.		[1]	TUBE AS
33.	296-5137 I	[2]	HOSE AS
34.	296-6488 I	[2]	HOSE AS
35.	296-6557 I	[1]	HOSE AS
36.	296-6558 I	[1]	HOSE AS
37.	309-7472 I	[1]	HOSE AS
38.	124-1108	[14]	CLIP
39.	124-1109	[10]	CLIP
40.	148-8315	[4]	CONNECTOR AS
			(EACH INCLUDES)
	2M-9780	[1]	SEAL-O-RING
	6V-8642	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
41.	148-8319	[1]	CONNECTOR AS
	2M-9780	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8715	[1]	CONNECTOR
42.	148-8410	[2]	PLUG AS
			(EACH INCLUDES)
	2M-9780	[1]	SEAL-O-RING
	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
43.	1P-3702	[4]	SEAL-RECTANGULAR
44.	1P-3703	[4]	SEAL-RECTANGULAR
45.	1P-3704	[3]	SEAL-RECTANGULAR
46.	1P-3705	[2]	SEAL-RECTANGULAR
47.	1P-3706	[1]	SEAL-RECTANGULAR
48.	1P-5767	[6]	FLANGE-HALF
49.	5K-9090	[3]	SEAL-O-RING
50.	5P-8077	[2]	FLANGE-HALF
51.	6V-0400	[8]	FLANGE-HALF
52.	6V-9746	[6]	SEAL-O-RING
53.	7J-9108	[2]	SEAL-O-RING
54.	7X-2475 M	[2]	BOLT (M16X2X130-MM)
55.	7X-2550 M	[16]	BOLT (M12X1.75X110-MM)
56.	7X-2553 M	[19]	BOLT (M16X2X40-MM)
57.	8T-4121	[10]	WASHER-HARD (11X21X2.5-MM THK)
58.	8T-4139 M	[24]	BOLT (M12X1.75X30-MM)
59.	8T-4140 M	[4]	BOLT (M16X2X60-MM)
60.	8T-4183 M	[8]	BOLT (M12X1.75X40-MM)
61.	8T-4184 M	[16]	BOLT (M12X1.75X45-MM)
62.	8T-4185 M	[8]	BOLT (M10X1.5X50-MM)
63.	8T-4193 M	[4]	BOLT (M16X2X50-MM)
64.	8T-4194 M	[16]	BOLT (M12X1.75X50-MM)
65.	8T-4223	[56]	WASHER-HARD (13.5X25.5X3-MM THK)
66.	8T-4956 M	[4]	BOLT (M12X1.75X35-MM)
67.	8T-6466 M	[4]	BOLT (M10X1.5X60-MM)
68.	8T-6685 M	[2]	BOLT (M10X1.5X110-MM)
69.	8T-9403	[4]	FLANGE-HALF
70.	9X-8257	[25]	WASHER (17.5X30X3.5-MM THK)
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890662

153-8673: LINES GP-STICK CYLINDER

LINES GP-STICK CYLINDER

153-8673 LINES GP-STICK CYLINDER
S/N MEM1-UP
PART OF 266-2713 BOOM AR, 230-2685, 230-2688, 230-2690, 239-8659, 263-5762, 263-5765 VALVE AR-STICK LOWERING CONT
AN ATTACHMENT

i01038681 SEBP4289

1538673 LINES GP-STICK CYLINDER Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	153-8871	[1]	PIPE AS
2.	153-8873	[1]	TUBE AS
3.	153-8845	[1]	TUBE AS
4.	158-8237 Y	[1]	VALVE GP-LOAD CONTROL (STICK)
5.	226-3237	[2]	SUPPORT AS
6.	148-4778	[4]	SUPPORT AS
7.	153-8666	[1]	SUPPORT AS
8.	153-8668	[2]	PLATE
9.	6V-8637	[1]	CONNECTOR
10.	6V-8636	[1]	CONNECTOR
11.	8T-4956 M	[8]	BOLT (M12X1.75X35-MM)
12.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	8T-4139 M	[4]	BOLT (M12X1.75X30-MM)
14.	6V-9746	[2]	SEAL-O-RING
15.	7X-2554 M	[6]	BOLT (M16X2X70-MM)
16.	9X-8257	[22]	WASHER (17.5X30X3.5-MM THK)
17.	8T-4140 M	[16]	BOLT (M16X2X60-MM)
18.	8T-4193 M	[4]	BOLT (M16X2X50-MM)
19.	7X-2557 M	[4]	BOLT (M16X2X140-MM)
20.	128-7514	[6]	CLIP
21.	7Y-4868	[2]	CLIP
22.	1P-3706	[2]	SEAL-RECTANGULAR
23.	3D-2824	[1]	SEAL-O-RING
24.	3J-1907	[1]	SEAL-O-RING
25.	6V-8398	[2]	SEAL-O-RING
26.	6V-8397	[2]	SEAL-O-RING
27.	223-6722	[1]	SUPPORT AS
28.	6V-8634	[1]	CONNECTOR
29.	3K-0360	[1]	SEAL-O-RING
30.	153-8869	[1]	PIPE AS
31.	153-8874	[2]	CLIP AS
32.	093-1294	[2]	CLAMP
33.	8T-4182 M	[2]	BOLT (M10X1.5X45-MM)
34.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890663

165-3278: LINES GP-STICK CYLINDER

LINES GP-STICK CYLINDER

165-3278 LINES GP-STICK CYLINDER
S/N MEM1-UP
PART OF 158-9112 CYLINDER & LINES GP-STICK
AN ATTACHMENT

i01027441 SEBP4289

1653278 LINES GP-STICK CYLINDER Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	340-3015	[1]	TUBE AS
2.	9X-8257	[16]	WASHER (17.5X30X3.5-MM THK)
3.	7X-2556 M	[4]	BOLT (M16X2X100-MM)
4.	1P-3706	[1]	SEAL-RECTANGULAR
5.	148-4777	[2]	SUPPORT AS
6.	128-7514	[4]	CLIP
7.	7X-2554 M	[4]	BOLT (M16X2X70-MM)
8.	8T-4193 M	[8]	BOLT (M16X2X50-MM)
9.	148-4778	[2]	SUPPORT AS
	M		METRIC PART

#SEBP42890664

255-1823: LINES GP-SWING MOTOR

LINES GP-SWING MOTOR

255-1823 LINES GP-SWING MOTOR
S/N MEM1-UP
PART OF 230-2677 HYDRAULIC AR
Type 1

i02208718 SEBP4289

2551823 LINES GP-SWING MOTOR Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	116-3420 Y	[1]	VALVE GP-SWING CUSHION (ANTI-REACTION, FINE SWING)
2.	149-6812	[1]	BLOCK
3.	152-9241	[1]	TUBE AS
4.	212-5328 I	[1]	HOSE AS
5.	212-5329 I	[1]	HOSE AS
6.	241-8928 Y	[1]	VALVE GP-CONTROL (SWING)
7.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
8.	153-6237	[1]	ELBOW AS
	3D-2824	[1]	SEAL-O-RING
	6V-9004	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
9.	1P-3702	[1]	SEAL-RECTANGULAR
10.	1P-3703	[1]	SEAL-RECTANGULAR
11.	4F-8946	[2]	SEAL-O-RING
12.	4J-5267	[2]	SEAL-O-RING
13.	6V-9746	[1]	SEAL-O-RING
14.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4178 M	[6]	BOLT (M10X1.5X90-MM)
16.	8T-5005 M	[4]	BOLT (M10X1.5X70-MM)
17.	8T-5436 M	[8]	BOLT (M10X1.5X130-MM)
18.	8T-6466 M	[4]	BOLT (M10X1.5X60-MM)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890665

255-1823: LINES GP-SWING MOTOR

LINES GP-SWING MOTOR

255-1823 LINES GP-SWING MOTOR
S/N MEM1-UP
PART OF 230-2677 HYDRAULIC AR
Type 2

i02641347 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	116-3420 Y	[1]	VALVE GP-SWING CUSHION (ANTI-REACTION, FINE SWING)
2.	149-6812 C	[2]	BLOCK
3.	361-9026 CI	[2]	HOSE AS
4.	241-8928 Y	[1]	VALVE GP-CONTROL (SWING)
5.	148-8327 C	[1]	CONNECTOR AS
	3D-2824	[1]	SEAL-O-RING
	6V-8637	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
6.	148-8347	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
7.	153-6237	[1]	ELBOW AS
	3D-2824	[1]	SEAL-O-RING
	6V-9004	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
8.	1P-3702 C	[2]	SEAL-RECTANGULAR
9.	4F-8946	[2]	SEAL-O-RING
10.	4J-5267	[2]	SEAL-O-RING
11.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
12.	8T-4178 M	[6]	BOLT (M10X1.5X90-MM)
13.	8T-5005 CM	[8]	BOLT (M10X1.5X70-MM)
14.	8T-5436 M	[8]	BOLT (M10X1.5X130-MM)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890666

227-0512: LINES GP-TRAVEL MOTOR

LINES GP-TRAVEL MOTOR

227-0512 LINES GP-TRAVEL MOTOR
S/N MEM1-UP
PART OF 230-2677 HYDRAULIC AR

i02100268 SEBP4289

2270512 LINES GP-TRAVEL MOTOR Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4I-1647	[1]	SUPPORT AS
2.	4I-1682	[1]	PLATE
3.	4I-8783	[2]	FLANGE
4.	5P-0597	[4]	CLAMP-HOSE
5.	7K-1181	[7]	STRAP-CABLE
6.	115-3407 M	[12]	BOLT (M12X1.75X105-MM)
7.	340-3013	[2]	TUBE AS
8.	340-3014	[2]	TUBE AS
9.	138-5659 I	[2]	HOSE AS
10.	138-5662	[2]	HOSE AS
11.	143-8067 Y	[2]	VALVE GP-TRAVEL COUNTERBALANCE
12.	148-4958	[4]	GROMMET
14.	148-4960	[2]	GROMMET
15.	156-0622 Y	[1]	SWIVEL GP
16.	165-3350	[4]	GUARD
17.	361-9027 I	[2]	HOSE AS
18.	361-9028 I	[2]	HOSE AS
19.	361-9030 I	[2]	HOSE AS
20.	361-9029 I	[2]	HOSE AS
21.	227-0515	[1]	BRACKET AS
22.	227-0517	[1]	BRACKET AS
23.	095-1701	[4]	SEAL-O-RING
24.	148-8327	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8637	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
25.	148-8339	[1]	CONNECTOR AS
	6V-8716	[1]	CONNECTOR (STRAIGHT)
	6V-9746	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
26.	148-8367	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
27.	148-8378	[2]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
28.	148-8392	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-9746	[1]	SEAL-O-RING
	6V-9853	[1]	ELBOW
29.	148-8439	[1]	TEE AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
	6V-8774	[1]	TEE
30.	150-4033	[1]	TEE AS
	6V-9746	[2]	SEAL-O-RING
	6V-9846	[1]	TEE
31.	1P-3704	[16]	SEAL-RECTANGULAR
32.	1P-3705	[6]	SEAL-RECTANGULAR
33.	1P-5767	[32]	FLANGE-HALF
34.	6V-1575	[2]	CLIP (SLOT)
35.	6V-1576	[2]	CLIP (TAB)
36.	6V-1577	[2]	GROMMET
37.	7X-2552 M	[5]	BOLT (M16X2X30-MM)
38.	7Y-4038	[8]	CLAMP-HALF
39.	8T-0706	[2]	RING-RETAINING
40.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
41.	8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
42.	8T-4183 M	[20]	BOLT (M12X1.75X40-MM)
43.	8T-4184 M	[26]	BOLT (M12X1.75X45-MM)
44.	8T-4194 M	[32]	BOLT (M12X1.75X50-MM)
45.	8T-4195 M	[4]	BOLT (M10X1.5X30-MM)
46.	8T-4223	[78]	WASHER-HARD (13.5X25.5X3-MM THK)
47.	8T-5041 M	[8]	BOLT (M12X1.75X120-MM)
48.	9X-8257	[5]	WASHER (17.5X30X3.5-MM THK)
49.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890667

260-7365: LINES GP-TRAVEL MOTOR

LINES GP-TRAVEL MOTOR

260-7365 LINES GP-TRAVEL MOTOR
S/N MEM1-UP
PART OF 258-7825 FRAME AR-UNDERCARRIAGE
AN ATTACHMENT

i02489237 SEBP4289

2607365 LINES GP-TRAVEL MOTOR Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	4I-1647	[1]	SUPPORT AS
2.	4I-1682	[1]	PLATE
3.	4I-8783	[2]	FLANGE
4.	5P-0597	[4]	CLAMP-HOSE
5.	110-4821 M	[12]	BOLT-SOCKET HEAD (M16X2X55-MM)
6.	138-5308	[2]	TUBE AS
7.	155-9200 Y	[2]	VALVE GP-TRAVEL COUNTERBALANCE
8.	156-0622 Y	[1]	SWIVEL GP
9.	165-3350	[4]	GUARD
10.	173-4946	[2]	CLIP
11.	173-4947	[2]	CLIP
12.	173-5120	[4]	GROMMET
13.	204-8488	[2]	GROMMET
14.	223-6642 I	[2]	HOSE AS
15.	223-6643 I	[2]	HOSE AS
16.	138-5309	[2]	TUBE AS
17.	227-0515	[1]	BRACKET AS
18.	227-0517	[1]	BRACKET AS
19.	265-9774 I	[2]	HOSE AS
20.	265-9776 I	[2]	HOSE AS
21.	6Y-4055 I	[2]	HOSE AS
22.	207-6419 I	[2]	HOSE AS
23.	148-8336	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
24.	148-8339	[1]	CONNECTOR AS
	6V-8716	[1]	CONNECTOR (STRAIGHT)
	6V-9746	[1]	SEAL-O-RING
	7M-8485	[1]	SEAL-O-RING
25.	148-8439	[1]	TEE AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[2]	SEAL-O-RING
	6V-8774	[1]	TEE
26.	150-4033	[1]	TEE AS
	6V-9746	[2]	SEAL-O-RING
	6V-9846	[1]	TEE
27.	153-6236	[2]	REDUCER AS
			(EACH INCLUDES)
	6V-8946	[1]	REDUCER
	6V-9746	[1]	SEAL-O-RING
28.	164-5615	[2]	ELBOW AS
			(EACH INCLUDES)
	4K-1388	[1]	SEAL-O-RING
	5K-9090	[1]	SEAL-O-RING
	8T-8986	[1]	ELBOW
29.	1P-3704	[16]	SEAL-RECTANGULAR
30.	1P-3705	[10]	SEAL-RECTANGULAR
31.	1P-5767	[32]	FLANGE-HALF
32.	6V-1577	[2]	GROMMET
33.	7K-1181	[14]	STRAP-CABLE
34.	7X-2552 M	[5]	BOLT (M16X2X30-MM)
35.	7Y-4038	[8]	CLAMP-HALF
36.	8T-0706	[2]	RING-RETAINING
37.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
38.	8T-4136 M	[8]	BOLT (M10X1.5X25-MM)
39.	8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
40.	8T-4183 M	[20]	BOLT (M12X1.75X40-MM)
41.	8T-4184 M	[26]	BOLT (M12X1.75X45-MM)
42.	8T-4194 M	[32]	BOLT (M12X1.75X50-MM)
43.	8T-4223	[78]	WASHER-HARD (13.5X25.5X3-MM THK)
44.	8T-5041 M	[8]	BOLT (M12X1.75X120-MM)
45.	9X-8257	[5]	WASHER (17.5X30X3.5-MM THK)
46.	1U-8846 B		SEALANT-GASKET
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890668

216-9912: LINES GP-WORK TOOL

LINES GP-WORK TOOL

216-9912 LINES GP-WORK TOOL
S/N MEM1-UP
PART OF 217-4311 LINKAGE AR-DEMOLITION
AN ATTACHMENT

i01711976 SEBP4289

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	202-6281 Y	[1]	VALVE GP-CHECK
2.	1P-3703	[1]	SEAL-RECTANGULAR
3.	7X-2549 M	[8]	BOLT (M12X1.75X100-MM)
4.	5I-3012	[1]	ORIFICE AS
5.	3J-1907	[2]	SEAL-O-RING
6.	148-8413	[1]	REDUCER AS
	4J-5477	[1]	SEAL-O-RING
	6V-8934	[1]	ADAPTER
7.	6V-8397	[1]	SEAL-O-RING
8.	148-8378	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
9.	8T-4648 M	[4]	BOLT (M12X1.75X70-MM)
10.	1P-3704	[2]	SEAL-RECTANGULAR
11.	162-9845	[1]	HOSE AS
12.	164-0770 I	[1]	HOSE AS
13.	7Y-4868	[2]	CLIP
14.	8T-4182 M	[6]	BOLT (M10X1.5X45-MM)
15.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
16.	8T-0164	[1]	ELBOW
17.	4J-5477	[1]	SEAL-O-RING
18.	8T-4185 M	[2]	BOLT (M10X1.5X50-MM)
19.	8T-9403	[4]	FLANGE-HALF
20.	149-5452	[1]	UNION AS (STRAIGHT)
	6V-8397	[2]	SEAL-O-RING
	6V-8994	[1]	UNION (STRAIGHT)
21.	6V-9168	[1]	NUT (11/16-16-THD)
22.	119-2324	[1]	SUPPORT AS
23.	119-2325	[1]	SUPPORT AS
24.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
25.	8T-4121	[12]	WASHER-HARD (11X21X2.5-MM THK)
26.	8T-4956 M	[2]	BOLT (M12X1.75X35-MM)
27.	217-2921	[1]	TUBE AS
28.	217-2545	[1]	PLATE
29.	217-3350	[1]	BLOCK
30.	7K-1181 B	[5]	STRAP-CABLE
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP42890669

194-0946: MANIFOLD & VALVE GP

MANIFOLD & VALVE GP

194-0946 MANIFOLD & VALVE GP -STICK IN, TRAVEL FORWARD
S/N MEM1-UP
PART OF 241-2777, 241-2778, 250-4040, 250-8436, 251-2155 VALVE GP-CONTROL
ALSO AN ATTACHMENT

i01834589 SEBP4289

1940946 MANIFOLD & VALVE GP Parts scheme

For full view, you need register

Parts for your 365C EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	148-8407	[3]	PLUG AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	9S-4191	[1]	PLUG (9/16-18-THD)
2.	118-5085	[3]	RETAINER
3.	118-5086	[3]	SPRING
4.	118-5087	[3]	SPRING
5.	155-2251	[3]	PLATE
6.	156-2829 Y	[1]	SOLENOID GP
6A.	156-2829 Y	[1]	SOLENOID GP
6B.	156-2829 Y	[1]	SOLENOID GP
7.	158-3504	[3]	SPOOL-CONTROL
8.	194-0944	[1]	HOUSING
9.	148-8411	[4]	PLUG AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
10.	030-4605	[3]	SEAL-O-RING
11.	177-1403	[3]	SPRING
12.	177-1405	[3]	SPRING
13.	1H-5728	[3]	SEAL-O-RING
14.	2D-6648	[3]	RING-RETAINING
15.	3C-8388	[6]	PIN-ROLL
16.	4J-9535	[2]	SEAL-O-RING
17.	8T-3998 M	[12]	BOLT (M4X0.7X12-MM)
18.	155-3624	[10]	PLUG AS
			(EACH INCLUDES)
	3J-7354	[1]	SEAL-O-RING
	9S-4182	[1]	PLUG (7/16-20-THD)
19.	8T-6759	[3]	PLUG-PIPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION