AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

233-4601 WIRING GP-REAR -MAIN S/N B9L492-UP PART OF 349-2553 COMMON AR 160M MOTOR GRADER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
LIGHTING GP

MOTOR GRADER 160M MOTOR GRADER B9L
 160M Motor Grader B9L00001-UP (MACHINE) POWERED BY C9 Engine SEBP4302 160M B9L   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-REAR
233-4601 WIRING GP-REAR
WIRING GP-REAR
233-4601 WIRING GP-REAR
WIRING GP-REAR
233-4601 WIRING GP-REAR
WIRING GP-REAR
233-4602 WIRING GP-REAR
WIRING GP-REAR
233-4602 WIRING GP-REAR
WIRING GP-REAR
352-1596 WIRING GP-REAR
 

#SEBP43020600
 

233-4601: WIRING GP-REAR

233-4601 WIRING GP-REAR -MAIN
S/N B9L492-UP
PART OF 349-2553 COMMON AR
i03995767 SEBP4302
2334601 WIRING GP-REAR Parts scheme 2334601 WIRING GP-REAR Parts scheme 2334601 WIRING GP-REAR Parts scheme 2334601 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 C [24] STRAP-CABLE  
2. 9R-5008 [2] SPACER (11X20X6-MM THK)  
3. 116-0118 C [1] CLIP  
4. 166-0690 [2] BLOCK AS-MOUNTING  
5. 189-3158 [2] SUPPRESSOR-ARC  
6. 274-6717 [1] SENSOR-PRESSURE (TURBOCHARGER INLET)  
7. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 251-3265 [2] LINK AS  
    (EACH INCLUDES)
  036-7232 [1] ROD END  
  8S-7048 [1] ROD END  
  9L-3334 [1] NUT-PLATED (1/4-28-THD, LH)  
  6F-0612 [1] NUT-JAM (1/4-28-THD)  
9. 258-8949 [4] SPACER (7.5X12X56-MM THK)  
10. 266-1467 Y [2] SENSOR GP-POSITION (ROTARY)(ARTICULATION)  
11. 279-9658 [2] LEVER  
12. 288-5507 [1] PLATE AS  
13. 289-9520 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 291-2162 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
15. 358-3849 [1] HARNESS AS-SWITCH (CHASSIS)  
  8T-8730 [20] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [3] PLUG-SEAL  
  9X-3402 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
16. 292-0970 [1] HARNESS AS-PUMP (FUEL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [3] PLUG-SEAL  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  9X-1056 [4] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
17. 357-6275 [1] HARNESS AS-CHASSIS (AIR CONDITIONER)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [4] STRAP-CABLE  
  5P-1255 E HOSE (96-CM)  
  7G-7917 [16] PLUG-SEAL  
  7G-7918 [3] PLUG-SEAL  
  7G-7919 [5] PLUG-SEAL  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  8N-1518 [2] PLUG AS-CONNECTOR (25-PIN)  
  8N-1521 [2] BELL AS-END  
  9X-6857 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8N-1541 [5] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1545 [1] SOCKET-CONNECTOR (8-GA)  
  8N-1549 [4] SOCKET-CONNECTOR (4-GA)  
  8T-8729 [21] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [75] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [121] PLUG-SEAL  
  9W-0844 [18] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9X-1054 [3] PLUG AS-CONNECTOR (4-PIN)  
  9X-1056 [5] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [180] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-5615 SEAL (INTERFACE, 70-PIN)  
  9X-6772 [4] STRAP-CABLE  
  100-5041 [7] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(72-M)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(80-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM)  
  126-1768 [19] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1774 [3] COVER-CONNECTOR  
  2L-8069 [4] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  2L-8057 [1] TERMINAL-RING (8-GA, NO. 10 SCREW)  
    -OR-
  2L-8049 [1] TERMINAL-RING (6-GA, NO. 10 SCREW)  
  2L-8052 [1] TERMINAL-RING (6-GA, 3/8-IN SCREW)  
    -OR-
  2L-8060 [1] TERMINAL-RING (8-GA, 3/8-IN SCREW)  
  135-5010 E TUBE-HEAT SHRINK (52-MM DIA)(40-CM)  
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
    (EACH PLUG AS INCLUDES)
  159-9322 [1] SEAL-O-RING  
  7N-9017 [3] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [10] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
    (EACH PLUG AS INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  274-3774 [1] CAP-CONNECTOR  
  274-3781 [1] CAP-SEAL  
18. 353-3810 C [1] HARNESS AS-SENSOR (HYDRAULIC PUMP)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [4] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [1] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
  264-7030 [1] SEAL-CONNECTOR  
19. 353-4515 C [1] SWITCH GP-TOGGLE (ENGINE SHUTDOWN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
20. 033-8248 [5] CLIP (LOOP)  
21. 130-5300 C [9] CLIP  
22. 132-5789 [6] CLIP (LADDER)  
23. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
24. 134-3355 [1] STRAP AS  
25. 134-3987 [2] CLIP (LOOP)  
26. 144-8344 [1] SPACER (11X19X20-MM THK)  
27. 1S-0994 [1] CLIP (LOOP)  
28. 264-0460 M [1] STUD (M10X1.5X50-MM)  
29. 2F-7888 [4] SCREW-MACHINE (10-32X1.25-IN)  
30. 2V-3216 [1] CLIP (LOOP)  
31. 3B-4619 [2] PIN-COTTER  
32. 3E-5169 [1] GUARD-SWITCH  
33. 3E-5239 [1] RELAY AS (24-VOLT)(BACKUP ALARM)  
33A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
33B. 3E-5239 [1] RELAY AS (24-VOLT)(SECONDARY STEERING)  
33C. 3E-5239 [1] RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)  
34. 3J-1907 [1] SEAL-O-RING  
35. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
36. 4D-7794 [1] CLIP  
38. 4P-7581 C [2] CLIP (LADDER)  
39. 4P-7582 C [1] CLIP (LADDER)  
41. 5C-7261 M [1] NUT (M8X1.25-THD)  
42. 5C-9553 M [4] BOLT (M6X1X16-MM)  
44. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
45. 5P-9085 [3] CLIP (LOOP)  
46. 5P-9297 [5] CLIP (LOOP)  
47. 6D-3479 [2] CLIP (LOOP)  
48. 6D-4244 [2] CLIP (LOOP)  
49. 6D-4246 [3] CLIP (LOOP)  
50. 6V-0894 [2] SEAL-O-RING  
51. 6V-3265 [2] CLIP  
52. 7C-4355 [1] CLIP  
53. 7D-7233 [4] CLIP (LOOP)  
54. 8C-3793 [4] BOLT (1/4-20X3.75-IN)  
55. 8M-2770 [1] CLIP (LOOP)  
56. 8M-2773 [1] CLIP (LOOP)  
57. 8T-4121 C [39] WASHER-HARD (11X21X2.5-MM THK)  
58. 8T-4133 CM [3] NUT (M10X1.5-THD)  
59. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
60. 8T-4137 CM [25] BOLT (M10X1.5X20-MM)  
61. 6V-7357 M [2] BOLT (M6X1X25-MM)  
62. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
63. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
64. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
65. 8T-4205 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
66. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
67. 9M-4972 [4] CLIP (LOOP)  
68. 9M-8406 [1] CLIP (LOOP)  
69. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
70. 3S-2093 [2] STRAP-CABLE  
71. 6V-1889 [1] CLIP (LOOP)  
72. 124-3019 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020601
 

233-4602: WIRING GP-REAR

233-4602 WIRING GP-REAR -CIRCUIT BREAKER PANEL
S/N B9L1-165
PART OF 234-7718 COMMON AR
i02248258 SEBP4302
2334602 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-8528 [1] SLEEVE  
2. 160-0564 [1] BRACKET AS  
3. 239-6370 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  9G-8909 [1] COVER-TERMINAL (BLACK)  
  159-8050 E CABLE (00-GA, BLACK)(32-CM)  
4. 243-1353 [1] SPACER (11X20X35-MM THK)  
5. 269-4983 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 280-8969 Y [1] PANEL GP-CIRCUIT BREAKER  
7. 287-6436 [1] BRACKET  
8. 287-8828 [1] PLATE  
9. 291-1886 [1] CABLE AS  
  8T-8827 [1] BOOT (RED)  
  170-3794 [1] RING-TERMINAL  
  030-1707 [1] TERMINAL-RING (0-GA, 3/8-IN SCREW)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  159-8047 E CABLE-ELECTRICAL (0-GA, RED)(225-CM)  
10. 291-1887 [1] CABLE AS  
  030-1707 [1] TERMINAL-RING (0-GA, 3/8-IN SCREW)  
11. 291-1889 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.2-M)  
  159-8049 E CABLE (00-GA, RED)(142-CM)  
12. 291-1891 [1] CABLE AS  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(76-CM)  
13. 291-9985 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 140-0860 [1] STRAP AS-GROUND  
15. 144-8344 [1] SPACER (11X19X20-MM THK)  
16. 160-0018 M [2] SCREW-FLAT HEAD (M12X1.75X45-MM)  
17. 3J-5696 [2] PIPE  
18. 4K-8302 [2] CLIP (LOOP)  
19. 4K-8864 [7] CLIP (LOOP)  
20. 5K-4778 [1] CLIP  
21. 6K-8178 [2] CLIP (LOOP)  
22. 7K-1181 [5] STRAP-CABLE  
23. 7X-2548 M [1] BOLT (M12X1.75X16-MM)  
24. 7X-7729 [4] WASHER (11X25X3-MM THK)  
25. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
27. 8T-4137 M [13] BOLT (M10X1.5X20-MM)  
28. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
29. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
30. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
31. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
32. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
33. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
35. 9M-8406 [4] CLIP (LOOP)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020602
 

233-4602: WIRING GP-REAR

233-4602 WIRING GP-REAR -CIRCUIT BREAKER PANEL
S/N B9L166-506
PART OF 234-7718, 349-2553 COMMON AR
i02837155 SEBP4302
2334602 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 160-0564 [1] BRACKET AS  
3. 243-1353 [1] SPACER (11X20X35-MM THK)  
4. 253-0472 [1] PLATE AS  
5. 269-4157 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(33-CM)  
6. 269-4983 [1] BRACKET AS  
7. 280-8969 Y [1] PANEL GP-CIRCUIT BREAKER  
8. 287-6436 [1] BRACKET  
9. 287-8828 [1] PLATE  
10. 291-1886 [1] CABLE AS  
  8T-8827 [1] BOOT (RED)  
  159-8047 E CABLE-ELECTRICAL (0-GA, RED)(228-CM)  
  317-3356 [2] TERMINAL-RING  
11. 291-1887 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(94-CM)  
12. 140-0860 [1] STRAP AS-GROUND  
13. 144-8344 [1] SPACER (11X19X20-MM THK)  
14. 160-0018 M [2] SCREW-FLAT HEAD (M12X1.75X45-MM)  
15. 174-5907 [5] CLIP (LOOP)  
16. 2V-1771 [4] GROMMET  
17. 6D-4246 [2] CLIP (LOOP)  
18. 6K-8178 [1] CLIP (LOOP)  
19. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
20. 7X-7729 [4] WASHER (11X25X3-MM THK)  
21. 8D-9671 [1] CLIP  
22. 8S-0948 [1] CLIP (SLOT)  
23. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
25. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
26. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
27. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
28. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
29. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
30. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
31. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
32. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020603
 

352-1596: WIRING GP-REAR

352-1596 WIRING GP-REAR
S/N B9L1-UP
PART OF 356-9759 CONVERSION AR-MACHINE, 352-2104 OPTION AR-HYDRAULIC, 350-5389, 364-3738, 367-7797, 367-7800 OPTION AR-REGIONAL
i03766284 SEBP4302
3521596 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 7K-1181 [1] STRAP-CABLE  
3. 8S-2634 [1] COVER AS  
4. 8W-8528 [1] SLEEVE  
5. 236-2341 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  159-8049 E CABLE (00-GA, RED)(85-CM)  
6. 388-7675 [1] RECEPTACLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  190-3848 [1] TERMINAL-RING (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(50-CM)  
  159-8050 E CABLE (00-GA, BLACK)(16-CM)  
7. 286-2439 [1] CABLE AS  
  315-0180 [1] TERMINAL-RING (00-GA, 3/8-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(62-CM)  
8. 291-1889 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(142-CM)  
9. 291-1891 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(76-CM)  
  194-4046 [1] COVER AS-TERMINAL (00-GA, POSITIVE, RED)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
10. 291-3817 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(103-CM)  
  190-3848 [1] TERMINAL-RING (00-GA, 1/2-IN SCREW)  
  190-3849 [1] COVER-TERMINAL (RED)  
11. 8Y-1816 [2] SPACER (12.5X25X25-MM THK)  
12. 144-8344 [1] SPACER (11X19X20-MM THK)  
13. 174-5907 [13] CLIP (LOOP)  
14. 4K-8302 [2] CLIP (LOOP)  
15. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 105-3482 M [4] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
17. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
18. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
19. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
20. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
21. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
22. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
23. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP43020604
 

352-1597: WIRING GP-REAR

352-1597 WIRING GP-REAR
S/N B9L1-UP
SHIELDED CABLE
PART OF 352-2108, 364-3744 OPTION AR-ROADING
i03770413 SEBP4302
3521597 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [13] STRAP-CABLE  
2. 7K-1181 [8] STRAP-CABLE  
3. 8S-2634 [1] COVER AS  
4. 8W-8528 [1] SLEEVE  
5. 240-7192 [4] RESISTOR AS (1500-OHM, 1-WATT)  
    (EACH INCLUDES)
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
6. 253-9557 [1] BLOCK AS-JUNCTION  
7. 313-7162 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  3S-2093 [1] STRAP-CABLE  
  7T-9987 [1] COVER AS-TERMINAL (RED)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  109-0887 E SLEEVE (60-CM)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(19-CM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  368-2369 BE TAPE  
8. 389-9478 [1] RECEPTACLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  3S-2093 [1] STRAP-CABLE  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  109-0887 E SLEEVE (74-CM)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(19-CM)  
  155-2270 KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  159-8050 E CABLE (00-GA, BLACK)(16-CM)  
  190-3848 [1] TERMINAL-RING (00-GA, 1/2-IN SCREW)  
  [1] COVER-TERMINAL  
  368-2369 BE TAPE  
9. 313-7164 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8737 [1] PLUG-SEAL  
  9X-4519 [1] BOOT (RED)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  109-0887 E SLEEVE (69-CM)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(21-CM)  
  368-2369 BE TAPE  
10. 313-7165 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  3S-2093 [1] STRAP-CABLE  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  109-0887 E SLEEVE (72-CM)  
  2L-8077 [1] TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)  
  2L-8081 [1] TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)  
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(20-CM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  194-4046 [1] COVER AS-TERMINAL (00-GA, POSITIVE, RED)  
  368-2369 BE TAPE  
11. 313-7167 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  3S-2093 [1] STRAP-CABLE  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
  9X-4519 [1] BOOT (RED)  
  109-0887 E SLEEVE (26-CM)  
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(19-CM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  190-3848 [1] TERMINAL-RING (00-GA, 1/2-IN SCREW)  
  190-3849 [1] COVER-TERMINAL (RED)  
  368-2369 BE TAPE  
12. 313-7229 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9X-4519 [1] BOOT (RED)  
  109-0887 E SLEEVE (47-CM)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  135-5009 E TUBE-HEAT SHRINK (32-MM DIA)(21-CM)  
  155-2270 KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  315-0180 [1] TERMINAL-RING (00-GA, 3/8-IN SCREW)  
  348-7341 [1] COVER-TERMINAL  
  368-2369 BE TAPE  
13. 355-5071 [1] WIRE AS  
14. 8Y-1816 [2] SPACER (12.5X25X25-MM THK)  
15. 130-5300 [2] CLIP  
16. 132-5789 [1] CLIP (LADDER)  
17. 144-8344 [1] SPACER (11X19X20-MM THK)  
18. 150-4086 M [2] SCREW (M4X0.7X16-MM)  
19. 1S-6420 [2] CLIP  
20. 4P-7581 [1] CLIP (LADDER)  
21. 5C-2890 M [2] NUT (M6X1-THD)  
22. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
23. 6D-4246 [1] CLIP (LOOP)  
24. 105-3482 M [4] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
25. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
27. 8T-4137 M [5] BOLT (M10X1.5X20-MM)  
28. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
29. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
30. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
31. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
32. 9M-8406 [11] CLIP (LOOP)  
33. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP43020605
 

396-9714: WIRING GP-REAR

396-9714 WIRING GP-REAR
S/N B9L1-UP
PART OF 426-1258 CONVERSION AR-CERTIFICATION, 356-9759 CONVERSION AR-MACHINE, 352-2104 OPTION AR-HYDRAULIC, 364-3738, 367-7797, 367-7800 OPTION AR-REGIONAL
i05253937 SEBP4302
3969714 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [8] STRAP-CABLE  
2. 7K-1181 [8] STRAP-CABLE  
3. 8S-2634 [1] COVER AS  
4. 8W-8528 [1] SLEEVE  
5. 236-2341 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  8N-1725 [1] COVER AS-TERMINAL (RED)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
  3S-6049 [1] TERMINAL AS-BATTERY (POSITIVE)  
  1M-6119 [1] BOLT (5/16-18X1.375-IN)  
  1M-6120 [1] NUT (5/16-18-THD)  
  159-8049 E CABLE (00-GA, RED)(85-CM)  
6. 286-2439 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(62-CM)  
  276-1786 [1] COVER-TERMINAL (RED)  
  315-0180 [1] TERMINAL-RING (00-GA, 3/8-IN SCREW)  
  328-8425 [1] COVER-TERMINAL (RED)  
7. 291-1889 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(142-CM)  
  328-8425 [1] COVER-TERMINAL (RED)  
8. 291-1891 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(76-CM)  
  194-4046 [1] COVER AS-TERMINAL (00-GA, POSITIVE, RED)  
  8L-8413 [1] STRAP-CABLE (WHITE)  
9. 291-3817 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(103-CM)  
  190-3848 [1] TERMINAL-RING (00-GA, 1/2-IN SCREW)  
  190-3849 [1] COVER-TERMINAL (RED)  
  328-8425 [1] COVER-TERMINAL (RED)  
10. 388-7675 [1] RECEPTACLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(50-CM)  
  159-8050 E CABLE (00-GA, BLACK)(16-CM)  
  190-3848 [1] TERMINAL-RING (00-GA, 1/2-IN SCREW)  
  [1] COVER-TERMINAL  
11. 396-9715 [1] HARNESS AS-MOTOR (START)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [2] PLUG-SEAL  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  455-0704 [1] SEAL-CONNECTOR  
12. 105-3482 M [4] BOLT-SOCKET HEAD (M8X1.25X16-MM)  
13. 144-8344 [1] SPACER (11X19X20-MM THK)  
14. 174-5907 [2] CLIP (LOOP)  
15. 1S-1476 [2] CLIP  
16. 4S-1962 [11] CLIP (LOOP)  
17. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
18. 7V-6571 [13] GROMMET  
19. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
21. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
22. 8T-4179 M [3] BOLT (M12X1.75X20-MM)  
23. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
24. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
25. 8T-4223 [5] WASHER-HARD (13.5X25.5X3-MM THK)  
26. 198-4778 [2] WASHER-HARD (13.5X30X12-MM THK)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP43020606
 

233-4623: WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9L1-410
FOLD DOWN ARMS
PART OF 298-7463, 298-7465 LIGHTING GP-ROADING
FOR USE WITH @@@@@233-4610@@@@@, @@@@@233-4624@@@@@
CANNOT BE USED WITH @@@@@247-6430@@@@@
i02183522 SEBP4302
2334623 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [22] STRAP-CABLE  
2. 7X-2393 [4] BUMPER-CONICAL  
3. 9S-1316 [2] SPRING  
4. 116-0118 [2] CLIP  
5. 135-0426 Y [2] LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)  
6. 199-3368 Y [2] LAMP GP-SIGNAL (24-VOLT, TURN)  
7. 245-2810 [1] BRACKET AS (RH)  
8. 245-2811 [1] BRACKET AS (LH)  
9. 245-2812 [1] ARM AS (RH)  
  5D-9629 [2] ROD  
10. 245-2813 [1] ARM AS (LH)  
  5D-9629 [3] ROD  
11. 245-2814 [2] ROD  
12. 261-1502 Y [2] LAMP GP (24-VOLT)  
13. 286-9718 [1] HARNESS AS-REAR LIGHTING  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8803 [4] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
14. 292-9390 [2] FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)  
15. 292-9391 [2] FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)  
16. 117-9409 [2] GROMMET  
17. 156-6175 [2] CLIP (LADDER)  
18. 1V-6688 [1] GROMMET  
19. 3B-5301 [2] PIN-COTTER  
20. 5C-2890 M [18] NUT (M6X1-THD)  
21. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
22. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
23. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
24. 7X-7729 [4] WASHER (11X25X3-MM THK)  
25. 8D-5641 B [8] BEARING  
26. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
27. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
28. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 9X-8256 [12] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020607
 

233-4623: WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9L411-442
FOLD DOWN ARMS
PART OF 298-7463, 298-7465 LIGHTING GP-ROADING
FOR USE WITH @@@@@233-4610@@@@@, @@@@@233-4624@@@@@
CANNOT BE USED WITH @@@@@247-6430@@@@@
i03364121 SEBP4302
2334623 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [22] STRAP-CABLE  
2. 7X-2393 [4] BUMPER-CONICAL  
3. 9S-1316 [2] SPRING  
4. 116-0118 [2] CLIP  
5. 135-0426 Y [2] LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)  
6. 201-5464 CY [2] LAMP GP-SIGNAL (12-VOLT, 24-VOLT, TURN)  
7. 245-2810 [1] BRACKET AS (RH)  
8. 245-2811 [1] BRACKET AS (LH)  
9. 245-2812 [1] ARM AS (RH)  
  5D-9629 [2] ROD  
10. 245-2813 [1] ARM AS (LH)  
  5D-9629 [3] ROD  
11. 245-2814 [2] ROD  
12. 261-1502 Y [2] LAMP GP (24-VOLT)  
13. 286-9718 [1] HARNESS AS-REAR LIGHTING  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8803 [4] KIT-RECEPTACLE (3-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
14. 292-9390 [2] FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)  
15. 292-9391 [2] FILM-WARNING (HAND CRUSH HAZARD, STAY BACK)  
16. 117-9409 [2] GROMMET  
17. 156-6175 [2] CLIP (LADDER)  
18. 1V-6688 [1] GROMMET  
19. 3B-5301 [2] PIN-COTTER  
20. 5C-2890 M [18] NUT (M6X1-THD)  
21. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
22. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
23. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
24. 7X-7729 [4] WASHER (11X25X3-MM THK)  
25. 8D-5641 B [8] BEARING  
26. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
27. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
28. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 9X-8256 [12] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020608
 

233-4623: WIRING GP-REAR LIGHTING

233-4623 WIRING GP-REAR LIGHTING -STOP, TAIL, TURN, BACKUP
S/N B9L1-UP
FOLD DOWN ARMS
PART OF 560-8856 LIGHTING AR-ROADING, 298-7463, 298-7465 LIGHTING GP-ROADING
FOR USE WITH @@@@@233-4610@@@@@, @@@@@233-4624@@@@@
CANNOT BE USED WITH @@@@@247-6430@@@@@
i03630362 SEBP4302
2334623 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [22] STRAP-CABLE  
2. 7X-2393 [4] BUMPER-CONICAL  
3. 9S-1316 [2] SPRING  
4. 116-0118 [2] CLIP  
5. 334-8049 CY [2] LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)  
6. 201-5464 Y [2] LAMP GP-SIGNAL (12-VOLT, 24-VOLT, TURN)  
7. 245-2810 [1] BRACKET AS (RH)  
8. 245-2811 [1] BRACKET AS (LH)  
9. 245-2812 [1] ARM AS (RH)  
  5D-9629 [2] ROD  
10. 245-2813 [1] ARM AS (LH)  
  5D-9629 [3] ROD  
11. 245-2814 [2] ROD  
12. 261-1502 Y [2] LAMP GP (24-VOLT)  
13. 286-9718 [1] HARNESS AS-REAR LIGHTING  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8803 [4] KIT-RECEPTACLE (3-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8730 [11] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [26] PLUG-SEAL  
  9W-0844 [23] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(25-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
16. 117-9409 [2] GROMMET  
17. 156-6175 [2] CLIP (LADDER)  
18. 1V-6688 [1] GROMMET  
19. 3B-4623 [2] PIN-COTTER  
20. 5C-2890 M [18] NUT (M6X1-THD)  
21. 5P-1076 [4] WASHER-HARD (13.5X30X4-MM THK)  
22. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
23. 129-3180 M [2] LOCKNUT (M12X1.75-THD)  
24. 7X-7729 [4] WASHER (11X25X3-MM THK)  
25. 132-0338 B [8] WASHER-PLASTIC (13X31.7X0.8-MM THK)  
26. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
27. 8T-4176 M [2] BOLT (M12X1.75X90-MM)  
28. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
29. 9X-8256 [12] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43020609
 

247-6430: WIRING GP-REAR LIGHTING

247-6430 WIRING GP-REAR LIGHTING -TAIL
S/N B9L1-442
CANNOT BE USED WITH @@@@@298-7463@@@@@, @@@@@298-7465@@@@@, @@@@@233-4624@@@@@, @@@@@233-4610@@@@@, @@@@@233-4623@@@@@
i02183696 SEBP4302
2476430 WIRING GP-REAR LIGHTING Parts scheme
  For full view, you need register

Parts for your 160M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [25] STRAP-CABLE  
2. 116-0118 [2] CLIP  
3. 135-0426 Y [2] LAMP GP-SIGNAL (24-VOLT, STOP, TAIL)  
4. 236-1928 [1] BRACKET AS  
5. 239-6379 [1] BRACKET AS  
6. 261-1502 Y [2] LAMP GP (24-VOLT)  
7. 286-9718 [1] HARNESS AS-REAR LIGHTING  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
  102-8803 [4] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [7] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
8. 156-6175 [2] CLIP (LADDER)  
9. 1V-6688 [1] GROMMET  
10. 5C-2890 M [12] NUT (M6X1-THD)  
11. 5P-4115 [6] WASHER-HARD (7.2X19X2-MM THK)  
13. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4172 M [6] BOLT (M10X1.5X80-MM)  
15. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Fuses - Replace
160M Motor Grader
Circuit Breakers - Reset
160M Motor Grader
Battery Disconnect Switch
160M Motor Grader
Engine Shutdown Switch - Check
160M Motor Grader
Battery or Battery Cable - Inspect/Replace
160M Motor Grader
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Procedure for Replacing Sensor Harnesses and Installing Harness Guards for the AWD Motor Speed Sensors on Certain Series M-Series Motor Graders{1408, 4351, 4803}
Procedure for Replacing Sensor Harnesses and Installing Harness Guards for the AWD Motor Speed Sensors on Certain Series M-Series Motor Graders{1408, 4351, 4803}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Prevent Damage to the Rear Chassis Harness Assembly on Certain Motor Graders{1408}
Procedure to Prevent Damage to the Rear Chassis Harness Assembly on Certain Motor Graders{1408}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}
Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}
Procedure to Install a Forward Facing Camera on the Front Cover on Certain Motor Graders{1408, 7348}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Installation Procedure for the Machine Security System (MSS3s) Universal Attachment Kit {1408, 1435, 7631}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Technical Information Bulletin
Procedure to Check for Connector Seals{1408, 7553}
Procedure to Check for Connector Seals{1408, 7553}
Wiring Issue of the Control Valve Group for the Front Lift{1408, 5051}
Wiring Issue of the Control Valve Group for the Front Lift{1408, 5051}
Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}
Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}
Specifications
Magnetic Switch (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System
Solenoid Valve (Hydraulic Fan)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System
Pressure Sensor (Brake Oil Accumulator) - Use with the <B>251-8256</B> Control Manifold Gp
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System
Temperature Sensor (Transmission Oil)
120M, 12M, 140M and 160M Motor Graders Power Train
Temperature Sensor (Hydraulic Oil)
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Temperature Sensor (Hydraulic Oil)
120M, 140M and 160M Motor Graders All Wheel Drive
Speed Sensor (Transmission) - Intermediate
120M, 12M, 140M and 160M Motor Graders Power Train
Pressure Sensor (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System
Pressure Switch (AWD Oil Filter Bypass) - Charge
120M, 140M and 160M Motor Graders All Wheel Drive
Toggle Switch (Ground Level Shutdown)
120M, 12M, 140M and 160M Motor Graders Machine Systems
Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems
Speed Sensor (Transmission) - Input and Output
120M, 12M, 140M and 160M Motor Graders Power Train
Ball Switch (Centershift Indicator)
120M, 12M, 140M and 160M Motor Graders Machine Systems
Speed Sensor (Piston Motor)
120M, 140M and 160M Motor Graders All Wheel Drive
Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train
Pressure Sensor (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems
Pressure Sensor (Brake Oil Accumulator)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System
Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines
Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Testing and Adjusting
Electric Starting System - Test
C9 Engines for Caterpillar Built Machines
System Schematic
Machine Security System
Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Magnetic Switch (Secondary Steering Relay) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System
Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Electrical Connector - Inspect
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Wiring Harness (Open Circuit) - Test
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Wiring Harness (Short Circuit) - Test
AccuGrade® GPS v11 for CD700
Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
Wiring Harness (Open Circuit) - Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Wiring Harness (Short Circuit) - Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System
Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System
Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System
Electrical Connector - Inspect
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Electrical Connector - Inspect
AccuGrade® (CD610)
Wiring Harness (Open Circuit) - Test
AccuGrade® (CD610)
Wiring Harness (Short Circuit) - Test
AccuGrade® (CD610)
Connector Contact Description
AccuGrade® (CD610)
Connector Contact Description
AccuGrade® GPS v11 for CD700
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
System Schematic
Machine Security System (MSS3i) Integrated
System Schematic
MSS3s Machine Security System
Connector Contact Description
Cat® Grade Control Cross Slope System for Motor Graders
Troubleshooting
Electrical Component and Connector Locations
Machine Security System
Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0070 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0070 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0144 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0144 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0144 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0420 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0420 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0420 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0444 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0444 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0444 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Switch Circuits
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 082 - CID 0490 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 0490 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 0368 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0368 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Wiring Information
C9 Engines for Motor Graders
Electrical Connectors - Inspect
C9 Engines for Motor Graders
Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
Electrical Power Supply
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 114 - CID 1396 - FMI 03
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 1396 - FMI 05
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 1396 - FMI 06
AccuGrade® GPS v11 for CD700
MID 027 - CID 2304 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2304 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2304 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0627 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0627 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Connector Locations
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Power Supply Circuit of Electronic Control Module
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Indicator Lamp Does Not Illuminate During the Power Up Self Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Indicator Lamp Is On Continuously
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Switch Circuits
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Electrical Connectors
C9 Engines for Motor Graders
Connector Locations
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System
MID 075 - CID 0517 - FMI 03
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
MID 075 - CID 0517 - FMI 04
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
CAN Data Link
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 145 - CID 0650 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 145 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
MID 027 - CID 2976 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2976 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2976 - FMI 08
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Cat Data Link - Test
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
MSS3s Machine Security System
Wiring Harness (Short Circuit) - Test
MSS3s Machine Security System
Connector Locations
MSS3s Machine Security System
Connector Contact Description
MSS3s Machine Security System
Electrical Connector - Inspect
MSS3s Machine Security System
Wiring Harness (Open Circuit) - Test
Cat® Grade Control Cross Slope System for Motor Graders
Wiring Harness (Short Circuit) - Test
Cat® Grade Control Cross Slope System for Motor Graders
Disassembly and Assembly
Battery - Remove and Install
160M Motor Grader Engine Supplement
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
A new Cab Wiring Group Updates the Cab Arrangement {1408, 7301, 7332}
2008/10/13
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2013/07/08
A New Circuit Breaker and a Cover are Available for the High Intensity Discharge Lights on Certain Motor Graders {1420, 1434}
2009/12/21
New Wiring Harnesses Are Now Used on Certain M-Series Motor Graders {1408}
2010/02/10
A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
2009/12/24
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
New Steering Cylinder Sensor Harnesses are now Available for Certain M Series Motor Graders {1408}
2011/05/09
Heated Anti-Icing Glass is Now Available for Certain M and M Series 2 Motor Graders {1408, 7305, 7308, 7310}
2011/12/26
Improvements Have Been Made to the Steering Position Sensing System on Certain M Series Motor Graders {1408, 430S, 7620}
2012/01/11
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
New Joystick Kit Is Now Available as a Service Replacement for Push Button Faceplate on Certain M Series and M Series 2 Motor Graders {1408, 3168, 4343, 5063, 5705}
2013/06/13
A New Flasher Assembly for the Turn Signal Is Now Available for Certain M and M Series 2 Motor Graders {1408}
2014/03/31
An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/12/09
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}
New Lighting Harness As Is Now Available for Certain M Series, and M Series 2 Motor Graders {1408, 1429}
A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}
A New Instrument Cluster is Now Used On Certain M Series and M Series 2 Motor Graders {1408, 7490}
Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}
Grommets for Antenna Wires are Now Available for Certain Motor Graders {1408, 7301, 733B}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
The Mounting of the Temperature Sensor for the Steering Temperature Oil Has Been Improved on Certain M and M Series 2 Motor Graders {1408}
The Mounting of the Temperature Sensor for the Steering Temperature Oil Has Been Improved on Certain M and M Series 2 Motor Graders {1408}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
A Bolted Joint Best Practice procedure for the Magnetic Switch Group (Main Power Relay) is Now Available {1408, 7499}
New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}
New AccuGrade Brackets are Now Used on Certain K and M Series Motor Graders {1408}

Caterpillar Parts SIS Catalog 160M :

WIRING GP-REAR
233-4601 WIRING GP-REAR
WIRING GP-REAR
233-4601 WIRING GP-REAR
WIRING GP-REAR
233-4601 WIRING GP-REAR
WIRING GP-MONITOR
360-5872 WIRING GP-MONITOR
WIRING GP-MONITOR
253-1967 WIRING GP-MONITOR
WIRING GP-MONITOR
253-1964 WIRING GP-MONITOR
WIRING GP-MONITOR
253-1964 WIRING GP-MONITOR
WIRING GP-LIGHTING
292-1874 WIRING GP-LIGHTING
WIRING GP-REAR
233-4602 WIRING GP-REAR
WIRING GP-REAR
233-4602 WIRING GP-REAR
WIRING GP-REAR
352-1596 WIRING GP-REAR
WIRING GP-REAR
352-1597 WIRING GP-REAR
WIRING GP-REAR
396-9714 WIRING GP-REAR
WIRING GP-REAR LIGHTING
233-4623 WIRING GP-REAR LIGHTING
WIRING GP-REAR LIGHTING
233-4623 WIRING GP-REAR LIGHTING
WIRING GP-REAR LIGHTING
233-4623 WIRING GP-REAR LIGHTING

Truck sale:

Caterpillar 160M2, Construction
207,000 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
173,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
209,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
204,900 
Caterpillar 160M2, Construction
- motor graders
N C MACHINERY CO.
Caterpillar 160M2, Construction
217,000 
Caterpillar 160M2, Construction
- motor graders
TRACTOR & EQUIPMENT CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.