AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

253-1964 WIRING GP-MONITOR -CD700 S/N B9M1-UP PART OF 292-7975 DISPLAY AR-MONITOR, 347-0920 GRADE CONTROL AR, 323-8139 SENSOR AR-GRADE Type 2 140M


ELECTRICAL AND STARTING SYSTEM
WIRING GP

MOTOR GRADER 140M MOTOR GRADER B9M
 140M Motor Grader B9M00001-UP (MACHINE) SEBP4304 140M B9M   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-LIGHTING
292-1874 WIRING GP-LIGHTING
WIRING GP-MONITOR
253-1964 WIRING GP-MONITOR
WIRING GP-MONITOR
253-1964 WIRING GP-MONITOR
WIRING GP-MONITOR
253-1967 WIRING GP-MONITOR
WIRING GP-MONITOR
360-5872 WIRING GP-MONITOR
WIRING GP-POWER RECEPTACLE
269-4152 WIRING GP-POWER RECEPTACLE
 

#SEBP43040740
 

253-1964: WIRING GP-MONITOR

253-1964 WIRING GP-MONITOR -CD700
S/N B9M1-UP
PART OF 292-7975 DISPLAY AR-MONITOR, 347-0920 GRADE CONTROL AR, 323-8139 SENSOR AR-GRADE
Type 2
i05016071 SEBP4304
2531964 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
4. 222-9151 [2] WASHER-HARD (11X32X5-MM THK)  
5. 245-8334 [2] KNOB  
6. 252-5190 [1] HARNESS AS-FRONT CHASSIS  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [8] PLUG-SEAL  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  248-5358 [1] PLUG AS-CONNECTOR (39-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7. 253-1963 [1] BRACKET AS  
8. 253-7461 [1] HARNESS AS-RADIO  
  8T-8737 [4] PLUG-SEAL  
  9X-3401 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  268-3371 [1] CAP AS-CONNECTOR  
  363-7105 [1] GROMMET  
  190-7614 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  167-8987 [1] PLUG AS-CONNECTOR (8-PIN)  
9. 273-1719 [1] BRACKET AS  
10. 273-5924 [1] KNOB  
11. 295-8369 [1] PLATE  
12. 295-8370 [1] BRACKET AS  
  7T-1099 [2] LINK  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  9X-2032 M [4] NUT-WELD (M4X0.7-THD)  
13. 295-8381 [1] PLATE AS  
14. 296-1067 [1] HARNESS AS-WIRING (LIGHT BAR)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [12] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  230-5008 [3] PLUG AS-CONNECTOR (4-PIN)  
    (EACH INCLUDES)
  264-7031 [1] SEAL-CONNECTOR  
15. 300-7909 [1] BRACKET AS  
  205-7047 M [2] INSERT-THREADED (M4X0.7-THD)  
16. 114-6658 [2] WASHER (6.5X17X1-MM THK)  
17. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
18. 117-8929 [1] WASHER (6.6X22X2-MM THK)  
19. 130-5300 [2] CLIP  
21. 3B-4610 [2] PIN-COTTER  
22. 3B-4504 [4] LOCKWASHER  
23. 5C-7261 M [2] NUT (M8X1.25-THD)  
24. 5P-4116 [6] WASHER-HARD (8.8X20.5X2-MM THK)  
27. 6B-8193 [2] PIN-CLEVIS  
28. 7X-2537 M [2] BOLT (M8X1.25X35-MM)  
32. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
33. 8T-4908 M [2] BOLT (M8X1.25X25-MM)  
34. 116-6952 M [6] BOLT (M4X0.7X10-MM)  
35. 9X-1046 M [6] SCREW (M4X0.7X18-MM)  
36. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
38. 5P-7657 CD SEAL (0.3-M)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP43040741
 

253-1967: WIRING GP-MONITOR

253-1967 WIRING GP-MONITOR -CD610
S/N B9M1-UP
PART OF 292-7980 DISPLAY AR-MONITOR, 323-8140 GRADE CONTROL AR
i02636561 SEBP4304
2531967 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 095-0817 [2] LOCKWASHER  
2. 167-8712 [1] ALARM  
3. 167-8713 [1] BAFFLE AS  
4. 167-8714 [1] WIRE AS  
5. 248-2284 [2] KNOB-CONTROL  
6. 251-0077 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
7. 251-9571 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
8. 295-8963 [1] PLATE  
9. 296-4922 [1] HARNESS AS-MONITOR  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-6772 [2] STRAP-CABLE  
  126-1774 [1] COVER-CONNECTOR  
  147-1444 [1] PLUG AS-CONNECTOR (70-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
10. 130-5300 [3] CLIP  
11. 4L-7125 [4] LOCKWASHER  
12. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4171 M [4] BOLT (M6X1X12-MM)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 5P-7657 D SEAL (0.2-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP43040742
 

360-5872: WIRING GP-MONITOR

360-5872 WIRING GP-MONITOR -ACCUGRADE
S/N B9M1-UP
i05065256 SEBP4304
3605872 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 222-9151 [2] WASHER-HARD (11X32X5-MM THK)  
3. 245-8334 [2] KNOB  
4. 252-5190 [1] HARNESS AS-FRONT CHASSIS  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [7] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [8] PLUG-SEAL  
  9W-0852 [1] PIN-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  248-5358 [1] PLUG AS-CONNECTOR (39-PIN)  
5. 273-5924 [1] KNOB  
6. 295-8369 [1] PLATE  
7. 295-8370 [1] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  9X-2032 M [4] NUT-WELD (M4X0.7-THD)  
8. 295-8381 [1] PLATE AS  
9. 296-1067 [1] HARNESS AS-WIRING (LIGHT BAR)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [12] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)  
  230-5008 [3] PLUG AS-CONNECTOR (4-PIN)  
    (EACH INCLUDES)
  264-7031 [1] SEAL-CONNECTOR  
10. 300-7909 [1] BRACKET AS  
  205-7047 M [2] INSERT-THREADED (M4X0.7-THD)  
11. 314-2820 [1] HARNESS AS-RADIO  
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8737 [5] PLUG-SEAL  
  9X-3401 [7] PIN-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  167-8987 [1] PLUG AS-CONNECTOR (8-PIN)  
12. 357-2272 [1] BRACKET AS  
  6V-9632 M [3] NUT-WELD (M6X1-THD)  
13. 114-6658 [2] WASHER (6.5X17X1-MM THK)  
14. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
15. 116-6952 M [6] BOLT (M4X0.7X10-MM)  
16. 117-8929 [1] WASHER (6.6X22X2-MM THK)  
17. 130-5300 [2] CLIP  
18. 344-5675 M [2] NUT (M10X1.5-THD)  
19. 3B-4504 [4] LOCKWASHER  
20. 3B-4610 [2] PIN-COTTER  
21. 5P-6419 [1] GROMMET  
22. 6B-8193 [2] PIN-CLEVIS  
23. 6V-1820 M [2] BOLT (M10X1.5X30-MM)  
24. 7X-7729 [4] WASHER (11X25X3-MM THK)  
25. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
26. 9X-1046 M [6] SCREW (M4X0.7X18-MM)  
27. 9X-2045 M [2] SCREW-TRUSS HEAD (M6X1X20-MM)  
28. 5P-7657 D [3] SEAL (0.3-M)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP43040743
 

269-4152: WIRING GP-POWER RECEPTACLE

269-4152 WIRING GP-POWER RECEPTACLE
S/N B9M1-UP
PART OF 234-7721, 349-2551 COMMON AR
i02300311 SEBP4304
2694152 WIRING GP-POWER RECEPTACLE Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [2] STRAP-CABLE  
2. 8V-9708 [1] SPACER (14.3X25.4X35-MM THK)  
3. 160-0564 [2] BRACKET AS  
4. 269-4157 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8050 E CABLE (00-GA, BLACK)(33-CM)  
5. 280-8969 Y [1] PANEL GP-CIRCUIT BREAKER  
6. 287-6436 [1] BRACKET  
7. 287-8828 [1] PLATE  
8. 291-1884 [1] CABLE AS  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  159-8050 E [1] CABLE (00-GA, BLACK)(98-CM)  
9. 341-6021 [1] CABLE AS  
  8T-8827 [1] BOOT (RED)  
  159-8047 E CABLE-ELECTRICAL (0-GA, RED)(244-CM)  
  317-3356 [2] TERMINAL-RING  
  328-8425 [1] COVER-TERMINAL (RED)  
10. 140-0860 [1] STRAP AS-GROUND  
11. 144-8344 [2] SPACER (11X19X20-MM THK)  
12. 160-0018 M [2] SCREW-FLAT HEAD (M12X1.75X45-MM)  
13. 174-5907 [6] CLIP (LOOP)  
14. 2V-1771 [4] GROMMET  
15. 3S-8664 [1] CLIP (LOOP)  
16. 4D-1432 [1] SPACER (12.52X17.14X45.72-MM THK)  
17. 8D-9671 [1] CLIP  
18. 8S-0948 [2] CLIP (SLOT)  
19. 8T-4121 [17] WASHER-HARD (11X21X2.5-MM THK)  
20. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
21. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
22. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
23. 8T-4179 M [1] BOLT (M12X1.75X20-MM)  
24. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
25. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
26. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
27. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 8T-4956 M [1] BOLT (M12X1.75X35-MM)  
29. 8T-5005 M [1] BOLT (M10X1.5X70-MM)  
30. 292-8741 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
31. 133-6934 [1] SPACER (11X20X25-MM THK)  
32. 8T-4186 M [1] BOLT (M10X1.5X40-MM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43040744
 

233-4601: WIRING GP-REAR

233-4601 WIRING GP-REAR -MAIN
S/N B9M1-548
PART OF 386-3842, 386-3843, 386-3844, 386-3845, 386-3846, 386-3847, 386-3848, 386-3849, 386-3850, 386-3851, 386-3852, 386-3853, 386-3854, 386-3855, 386-3856, 386-3857, 386-3858, 386-3859 CONVERSION AR-MACHINE
i02248257 SEBP4304
2334601 WIRING GP-REAR Parts scheme 2334601 WIRING GP-REAR Parts scheme 2334601 WIRING GP-REAR Parts scheme 2334601 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-5008 [2] SPACER (11X20X6-MM THK)  
2. 139-2116 [1] SWITCH GP-TOGGLE (ENGINE SHUTDOWN)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 166-0690 [2] BLOCK AS-MOUNTING  
4. 189-3158 [2] SUPPRESSOR-ARC  
5. 194-6722 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER INLET)  
6. 235-9778 [1] HARNESS AS-REAR (HYDRAULIC PUMP)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
8. 251-3265 [2] LINK AS  
    (EACH INCLUDES)
  036-7232 [1] ROD END  
  8S-7048 [1] ROD END  
  9L-3334 [1] NUT-PLATED (1/4-28-THD, LH)  
  6F-0612 [1] NUT-JAM (1/4-28-THD)  
9. 258-8949 [4] SPACER (7.5X12X56-MM THK)  
10. 266-1467 Y [2] SENSOR GP-POSITION (ROTARY)(ARTICULATION)  
11. 279-6798 [1] HARNESS AS-REAR CHASSIS (AIR CONDITIONER)  
  126-1774 [3] COVER-CONNECTOR  
  3S-2093 [4] STRAP-CABLE  
  9X-6772 [4] STRAP-CABLE  
  8N-1521 [2] BELL AS-END  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  8N-1518 [2] PLUG AS-CONNECTOR (25-PIN)  
  9X-1054 [3] PLUG AS-CONNECTOR (4-PIN)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [9] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
12. 279-9658 [2] LEVER  
13. 288-5507 [1] PLATE AS  
14. 289-9520 [1] BRACKET AS  
  289-9519 [1] BRACKET  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
15. 291-2162 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
16. 292-0964 [1] HARNESS AS-SWITCH (CHASSIS)  
  110-8769 [1] WIRE AS (16-GA)  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
17. 292-0970 [1] HARNESS AS-PUMP (FUEL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
18. 033-8248 [3] CLIP (LOOP)  
19. 130-5300 [12] CLIP  
20. 132-5789 [6] CLIP (LADDER)  
21. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
22. 134-3355 [1] STRAP AS  
23. 134-3987 [2] CLIP (LOOP)  
24. 144-8344 [1] SPACER (11X19X20-MM THK)  
25. 1S-0994 [1] CLIP (LOOP)  
26. 264-0460 M [1] STUD (M10X1.5X50-MM)  
27. 2F-7888 [4] SCREW-MACHINE (10-32X1.25-IN)  
28. 2V-3216 [1] CLIP (LOOP)  
29. 3B-4619 [2] PIN-COTTER  
30. 3E-5169 [1] GUARD-SWITCH  
31. 3E-5239 [1] RELAY AS (24-VOLT)(BACKUP ALARM)  
31A. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP)  
31B. 3E-5239 [1] RELAY AS (24-VOLT)(SECONDARY STEERING)  
31C. 3E-5239 [1] RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)  
32. 3J-1907 [1] SEAL-O-RING  
33. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
34. 4D-7794 [1] CLIP  
35. 4D-9517 [2] CLIP (SLOT)  
36. 4P-8134 [1] CLIP (LADDER)  
37. 5C-7261 M [1] NUT (M8X1.25-THD)  
38. 5C-9553 M [4] BOLT (M6X1X16-MM)  
39. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
40. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
41. 5P-9085 [3] CLIP (LOOP)  
42. 5P-9297 [5] CLIP (LOOP)  
43. 6D-3479 [2] CLIP (LOOP)  
44. 6D-4244 [2] CLIP (LOOP)  
45. 6V-0894 [2] SEAL-O-RING  
46. 6V-3265 [2] CLIP  
47. 7C-4355 [1] CLIP  
48. 7D-7233 [5] CLIP (LOOP)  
49. 7K-1181 [19] STRAP-CABLE  
50. 8F-6302 [4] BOLT (1/4-20X3.75-IN)  
51. 8M-2770 [3] CLIP (LOOP)  
52. 8M-2773 [4] CLIP (LOOP)  
53. 8T-4121 [37] WASHER-HARD (11X21X2.5-MM THK)  
54. 8T-4133 M [3] NUT (M10X1.5-THD)  
55. 8T-4136 M [6] BOLT (M10X1.5X25-MM)  
56. 8T-4137 M [25] BOLT (M10X1.5X20-MM)  
57. 8T-4138 M [2] BOLT (M6X1X20-MM)  
58. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
59. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
60. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
61. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
62. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
63. 9M-4972 [4] CLIP (LOOP)  
64. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43040745
 

233-4602: WIRING GP-REAR

233-4602 WIRING GP-REAR -CIRCUIT BREAKER PANEL
S/N B9M1-548
PART OF 386-3842, 386-3843, 386-3844, 386-3845, 386-3846, 386-3847, 386-3848, 386-3849, 386-3850, 386-3851, 386-3852, 386-3853, 386-3854, 386-3855, 386-3856, 386-3857, 386-3858, 386-3859 CONVERSION AR-MACHINE
i02248258 SEBP4304
2334602 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8W-8528 [1] SLEEVE  
2. 160-0564 [1] BRACKET AS  
3. 239-6370 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  9G-8909 [1] COVER-TERMINAL (BLACK)  
  159-8050 E CABLE (00-GA, BLACK)(32-CM)  
4. 243-1353 [1] SPACER (11X20X35-MM THK)  
5. 269-4983 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
6. 280-8969 Y [1] PANEL GP-CIRCUIT BREAKER  
7. 287-6436 [1] BRACKET  
8. 287-8828 [1] PLATE  
9. 291-1886 [1] CABLE AS  
  8T-8827 [1] BOOT (RED)  
  170-3794 [1] RING-TERMINAL  
  030-1707 [1] TERMINAL-RING (0-GA, 3/8-IN SCREW)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  159-8047 E CABLE-ELECTRICAL (0-GA, RED)(225-CM)  
10. 291-1887 [1] CABLE AS  
  030-1707 [1] TERMINAL-RING (0-GA, 3/8-IN SCREW)  
11. 291-1889 [1] CABLE AS  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  9X-9825 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  8N-0869 [1] COVER-TERMINAL (RED)  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.2-M)  
  159-8049 E CABLE (00-GA, RED)(142-CM)  
12. 291-1891 [1] CABLE AS  
  6V-2722 D TUBE-HEAT SHRINK (25.4-MM DIA)(0.1-M)  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  159-8049 E CABLE (00-GA, RED)(76-CM)  
13. 291-9985 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 140-0860 [1] STRAP AS-GROUND  
15. 144-8344 [1] SPACER (11X19X20-MM THK)  
16. 160-0018 M [2] SCREW-FLAT HEAD (M12X1.75X45-MM)  
17. 3J-5696 [2] PIPE  
18. 4K-8302 [2] CLIP (LOOP)  
19. 4K-8864 [7] CLIP (LOOP)  
20. 5K-4778 [1] CLIP  
21. 6K-8178 [2] CLIP (LOOP)  
22. 7K-1181 [5] STRAP-CABLE  
23. 7X-2548 M [1] BOLT (M12X1.75X16-MM)  
24. 7X-7729 [4] WASHER (11X25X3-MM THK)  
25. 8T-4121 [21] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4136 M [5] BOLT (M10X1.5X25-MM)  
27. 8T-4137 M [13] BOLT (M10X1.5X20-MM)  
28. 8T-4179 M [2] BOLT (M12X1.75X20-MM)  
29. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
30. 8T-4194 M [2] BOLT (M12X1.75X50-MM)  
31. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
32. 8T-4196 M [1] BOLT (M10X1.5X35-MM)  
33. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-6466 M [1] BOLT (M10X1.5X60-MM)  
35. 9M-8406 [4] CLIP (LOOP)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43040746
 

264-7522: WIRING GP-REAR

264-7522 WIRING GP-REAR
S/N B9M1-143
PART OF 234-7721 COMMON AR
i02297310 SEBP4304
2647522 WIRING GP-REAR Parts scheme 2647522 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 9R-5008 [2] SPACER (11X20X6-MM THK)  
3. 139-2116 [1] SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 189-3158 [2] SUPPRESSOR-ARC  
5. 194-6722 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER INLET)  
6. 235-9778 [1] HARNESS AS-REAR  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 251-3265 [2] LINK AS  
  6F-0612 [1] NUT-JAM (1/4-28-THD)  
  8S-7048 [1] ROD END  
  9L-3334 [1] NUT-PLATED (1/4-28-THD, LH)  
  036-7232 [1] ROD END  
9. 258-8949 [4] SPACER (7.5X12X56-MM THK)  
10. 266-1467 Y [2] SENSOR GP-POSITION (ROTARY)(ARTICULATION)  
11. 269-4156 [1] BRACKET  
12. 279-6798 [1] HARNESS AS-REAR CHASSIS  
  3S-2093 [4] STRAP-CABLE  
  9X-6772 [4] STRAP-CABLE  
  8N-1521 [2] BELL AS-END  
  126-1774 [3] COVER-CONNECTOR  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  8N-1518 [2] PLUG AS-CONNECTOR (25-PIN)  
  9X-1054 [3] PLUG AS-CONNECTOR (4-PIN)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [9] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
13. 279-9658 [2] LEVER  
14. 288-5507 [1] PLATE AS  
15. 289-9520 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
  289-9519 [1] BRACKET  
16. 291-2161 [1] HARNESS AS-HEATER & AIR COND  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
17. 291-2162 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
18. 292-0970 [1] HARNESS AS-PUMP (FUEL)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
19. 033-8248 [3] CLIP (LOOP)  
20. 130-5300 [12] CLIP  
21. 130-5301 [1] CLIP  
22. 132-5789 [3] CLIP (LADDER)  
23. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
24. 134-3355 [1] STRAP AS  
25. 134-3987 [2] CLIP (LOOP)  
26. 144-8344 [1] SPACER (11X19X20-MM THK)  
27. 166-0690 [2] BLOCK AS-MOUNTING  
28. 1S-0994 [1] CLIP (LOOP)  
29. 2F-7888 [4] SCREW-MACHINE (10-32X1.25-IN)  
30. 2K-8467 [2] PIN-SPRING  
31. 2N-9421 [2] SPRING-DISC  
32. 2V-3216 [1] CLIP (LOOP)  
33. 3E-5169 [1] GUARD-SWITCH  
34. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP RELAY)  
34A. 3E-5239 [1] RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)  
34B. 3E-5239 [1] RELAY AS (24-VOLT)(BACKUP ALARM)  
34C. 3E-5239 [1] RELAY AS (24-VOLT)(SECONDARY STEERING)  
35. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
36. 4D-7794 [1] CLIP  
37. 4D-9517 [1] CLIP (SLOT)  
38. 4P-7581 [2] CLIP (LADDER)  
39. 4P-7582 [1] CLIP (LADDER)  
40. 4P-8134 [1] CLIP (LADDER)  
41. 4S-1962 [1] CLIP (LOOP)  
42. 5C-7261 M [1] NUT (M8X1.25-THD)  
43. 5C-9553 M [4] BOLT (M6X1X16-MM)  
44. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
46. 5P-9297 [8] CLIP (LOOP)  
47. 6D-3479 [2] CLIP (LOOP)  
48. 6D-4244 [1] CLIP (LOOP)  
49. 6V-0894 [2] SEAL-O-RING  
50. 6V-3265 [2] CLIP  
51. 7C-4355 [1] CLIP  
52. 7D-7233 [5] CLIP (LOOP)  
53. 7K-1181 [19] STRAP-CABLE  
54. 7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
55. 8F-6302 [4] BOLT (1/4-20X3.75-IN)  
56. 8M-2770 [2] CLIP (LOOP)  
57. 8M-2773 [4] CLIP (LOOP)  
58. 8T-4121 [34] WASHER-HARD (11X21X2.5-MM THK)  
59. 8T-4133 M [1] NUT (M10X1.5-THD)  
60. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
61. 8T-4137 M [24] BOLT (M10X1.5X20-MM)  
62. 8T-4138 M [2] BOLT (M6X1X20-MM)  
63. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
64. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
65. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
66. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
67. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
68. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
69. 9M-4972 [4] CLIP (LOOP)  
70. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43040747
 

264-7522: WIRING GP-REAR

264-7522 WIRING GP-REAR
S/N B9M144-350
PART OF 234-7721 COMMON AR
i02831333 SEBP4304
2647522 WIRING GP-REAR Parts scheme 2647522 WIRING GP-REAR Parts scheme 2647522 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [1] STRAP-CABLE  
2. 9R-5008 [2] SPACER (11X20X6-MM THK)  
3. 139-2116 [1] SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)  
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 189-3158 [2] SUPPRESSOR-ARC  
5. 194-6722 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER INLET)  
6. 235-9778 [1] HARNESS AS-REAR  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 251-3265 [2] LINK AS  
    (EACH INCLUDES)
  6F-0612 [1] NUT-JAM (1/4-28-THD)  
  8S-7048 [1] ROD END  
  9L-3334 [1] NUT-PLATED (1/4-28-THD, LH)  
  036-7232 [1] ROD END  
9. 258-8949 [4] SPACER (7.5X12X56-MM THK)  
10. 266-1467 Y [2] SENSOR GP-POSITION (ROTARY)(ARTICULATION)  
11. 269-4156 [1] BRACKET  
12. 279-6798 [1] HARNESS AS-REAR CHASSIS  
  3S-2093 [4] STRAP-CABLE  
  9X-6772 [4] STRAP-CABLE  
  8N-1521 [2] BELL AS-END  
  126-1774 [3] COVER-CONNECTOR  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  8N-1518 [2] PLUG AS-CONNECTOR (25-PIN)  
  9X-1054 [3] PLUG AS-CONNECTOR (4-PIN)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2260 [3] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [9] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
13. 279-9658 [2] LEVER  
14. 288-5507 [1] PLATE AS  
15. 289-9520 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 291-2161 [1] HARNESS AS-HEATER & AIR COND  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
17. 291-2162 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
18. 292-0970 [1] HARNESS AS-PUMP (FUEL)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
19. 033-8248 [3] CLIP (LOOP)  
20. 130-5300 [12] CLIP  
21. 130-5301 [1] CLIP  
22. 132-5789 [3] CLIP (LADDER)  
23. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
24. 134-3355 [1] STRAP AS  
25. 134-3987 [2] CLIP (LOOP)  
26. 144-8344 [1] SPACER (11X19X20-MM THK)  
27. 166-0690 [2] BLOCK AS-MOUNTING  
28. 1S-0994 [1] CLIP (LOOP)  
29. 2F-7888 [4] SCREW-MACHINE (10-32X1.25-IN)  
30. 3B-4619 C [2] PIN-COTTER  
32. 2V-3216 [1] CLIP (LOOP)  
33. 3E-5169 [1] GUARD-SWITCH  
34. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP RELAY)  
34A. 3E-5239 [1] RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)  
34B. 3E-5239 [1] RELAY AS (24-VOLT)(BACKUP ALARM)  
34C. 3E-5239 [1] RELAY AS (24-VOLT)(SECONDARY STEERING)  
35. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
36. 4D-7794 [1] CLIP  
37. 4D-9517 [1] CLIP (SLOT)  
38. 4P-7581 [2] CLIP (LADDER)  
39. 4P-7582 [1] CLIP (LADDER)  
40. 4P-8134 [1] CLIP (LADDER)  
41. 4S-1962 [1] CLIP (LOOP)  
42. 5C-7261 M [1] NUT (M8X1.25-THD)  
43. 5C-9553 M [4] BOLT (M6X1X16-MM)  
44. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
46. 5P-9297 C [5] CLIP (LOOP)  
47. 6D-3479 [2] CLIP (LOOP)  
48. 6D-4244 [1] CLIP (LOOP)  
49. 6V-0894 [2] SEAL-O-RING  
50. 6V-3265 [2] CLIP  
51. 7C-4355 [1] CLIP  
52. 7D-7233 [5] CLIP (LOOP)  
53. 7K-1181 C [20] STRAP-CABLE  
54. 7X-0605 [2] WASHER-HARD (13X28X1.6-MM THK)  
55. 8F-6302 [4] BOLT (1/4-20X3.75-IN)  
56. 8M-2770 [2] CLIP (LOOP)  
57. 8M-2773 [4] CLIP (LOOP)  
58. 8T-4121 C [39] WASHER-HARD (11X21X2.5-MM THK)  
59. 8T-4133 CM [3] NUT (M10X1.5-THD)  
60. 8T-4136 CM [6] BOLT (M10X1.5X25-MM)  
61. 8T-4137 CM [25] BOLT (M10X1.5X20-MM)  
62. 8T-4138 M [2] BOLT (M6X1X20-MM)  
63. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
64. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
65. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
66. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
67. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
68. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
69. 9M-4972 [4] CLIP (LOOP)  
70. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
71. 5P-0767 C HOSE (24-CM)  
72. 5P-9085 C [3] CLIP (LOOP)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43040748
 

264-7522: WIRING GP-REAR

264-7522 WIRING GP-REAR
S/N B9M351-755
PART OF 234-7721 COMMON AR
i02975543 SEBP4304
2647522 WIRING GP-REAR Parts scheme 2647522 WIRING GP-REAR Parts scheme 2647522 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-0460 CM [1] STUD (M10X1.5X50-MM)  
2. 9R-5008 [2] SPACER (11X20X6-MM THK)  
3. 139-2116 [1] SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
4. 189-3158 [2] SUPPRESSOR-ARC  
5. 194-6722 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER INLET)  
6. 235-9778 [1] HARNESS AS-REAR  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
7. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
8. 251-3265 [2] LINK AS  
    (EACH INCLUDES)
  6F-0612 [1] NUT-JAM (1/4-28-THD)  
  8S-7048 [1] ROD END  
  9L-3334 [1] NUT-PLATED (1/4-28-THD, LH)  
  036-7232 [1] ROD END  
9. 258-8949 [4] SPACER (7.5X12X56-MM THK)  
10. 266-1467 Y [2] SENSOR GP-POSITION (ROTARY)(ARTICULATION)  
11. 269-4156 [1] BRACKET  
12. 323-5958 [1] HARNESS AS-REAR CHASSIS  
13. 279-9658 [2] LEVER  
14. 288-5507 [1] PLATE AS  
15. 289-9520 [1] BRACKET AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
16. 291-2161 [1] HARNESS AS-HEATER & AIR COND  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT CONNECTING PLUG INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
17. 291-2162 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
18. 292-0970 [1] HARNESS AS-PUMP (FUEL)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT RECEPTACLE INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
19. 033-8248 [3] CLIP (LOOP)  
20. 130-5300 [12] CLIP  
21. 130-5301 [1] CLIP  
22. 132-5789 [4] CLIP (LADDER)  
23. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
24. 134-3355 [1] STRAP AS  
25. 134-3987 [2] CLIP (LOOP)  
26. 144-8344 [1] SPACER (11X19X20-MM THK)  
27. 166-0690 [2] BLOCK AS-MOUNTING  
28. 1S-0994 [1] CLIP (LOOP)  
29. 2F-7888 [4] SCREW-MACHINE (10-32X1.25-IN)  
30. 3B-4619 [2] PIN-COTTER  
32. 2V-3216 [1] CLIP (LOOP)  
33. 3E-5169 [1] GUARD-SWITCH  
34. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP RELAY)  
34A. 3E-5239 [1] RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)  
34B. 3E-5239 [1] RELAY AS (24-VOLT)(BACKUP ALARM)  
34C. 3E-5239 [1] RELAY AS (24-VOLT)(SECONDARY STEERING)  
35. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
36. 4D-7794 [1] CLIP  
37. 4D-9517 [1] CLIP (SLOT)  
38. 4P-7581 [2] CLIP (LADDER)  
39. 4P-7582 [1] CLIP (LADDER)  
40. 4P-8134 [1] CLIP (LADDER)  
41. 4S-1962 [1] CLIP (LOOP)  
42. 5C-7261 M [1] NUT (M8X1.25-THD)  
43. 5C-9553 M [4] BOLT (M6X1X16-MM)  
44. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
45. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
46. 5P-9297 [5] CLIP (LOOP)  
47. 6D-3479 [2] CLIP (LOOP)  
48. 6D-4244 [1] CLIP (LOOP)  
49. 6V-0894 [2] SEAL-O-RING  
50. 6V-3265 [2] CLIP  
51. 7C-4355 [1] CLIP  
52. 7D-7233 [5] CLIP (LOOP)  
53. 7K-1181 [23] STRAP-CABLE  
55. 8F-6302 [4] BOLT (1/4-20X3.75-IN)  
56. 8M-2770 [2] CLIP (LOOP)  
57. 8M-2773 [4] CLIP (LOOP)  
58. 8T-4121 [39] WASHER-HARD (11X21X2.5-MM THK)  
59. 8T-4133 CM [4] NUT (M10X1.5-THD)  
60. 8T-4136 CM [7] BOLT (M10X1.5X25-MM)  
61. 8T-4137 M [25] BOLT (M10X1.5X20-MM)  
62. 8T-4138 M [2] BOLT (M6X1X20-MM)  
63. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
64. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
66. 8T-4195 CM [2] BOLT (M10X1.5X30-MM)  
67. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
68. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
69. 9M-4972 [4] CLIP (LOOP)  
70. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
72. 5P-9085 [3] CLIP (LOOP)  
73. 3J-1907 C [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP43040749
 

264-7522: WIRING GP-REAR

264-7522 WIRING GP-REAR
S/N B9M756-953
PART OF 234-7721, 349-2551 COMMON AR
i03571572 SEBP4304
2647522 WIRING GP-REAR Parts scheme 2647522 WIRING GP-REAR Parts scheme 2647522 WIRING GP-REAR Parts scheme
  For full view, you need register

Parts for your 140M MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-5008 [2] SPACER (11X20X6-MM THK)  
2. 139-2116 [1] SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN)  
  6T-3631 [2] NUT-HEX (15/32-32-THD)  
  6T-3632 [1] LOCKWASHER  
  6T-3633 [1] RING-LOCKING  
  186-3735 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 189-3158 [2] SUPPRESSOR-ARC  
4. 194-6722 Y [1] SENSOR GP-PRESSURE (TURBOCHARGER INLET)  
5. 235-9778 [1] HARNESS AS-REAR  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [6] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [1] PLUG-SEAL  
  9X-3401 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
6. 240-7193 [1] RESISTOR AS (500-OHM, 2-WATT)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
7. 251-3265 [2] LINK AS  
    (EACH INCLUDES)
  6F-0612 [1] NUT-JAM (1/4-28-THD)  
  8S-7048 [1] ROD END  
  9L-3334 [1] NUT-PLATED (1/4-28-THD, LH)  
  036-7232 [1] ROD END  
8. 258-8949 [4] SPACER (7.5X12X56-MM THK)  
9. 266-1467 Y [2] SENSOR GP-POSITION (ROTARY)(ARTICULATION)  
10. 269-4156 [1] BRACKET  
11. 279-9658 [2] LEVER  
12. 288-5507 [1] PLATE AS  
13. 289-9520 [1] BRACKET AS  
  289-9519 [1] BRACKET  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
14. 291-2161 [1] HARNESS AS-HEATER & AIR COND  
  102-8802 [4] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [19] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [11] PLUG-SEAL  
  9X-3401 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
15. 291-2162 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
16. 292-0970 [1] HARNESS AS-PUMP (FUEL)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [3] PLUG-SEAL  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  9X-1056 [4] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
17. 334-0585 C [1] HARNESS AS-CHASSIS  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8801 [3] KIT-RECEPTACLE (12-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
  3S-2093 [4] STRAP-CABLE  
  5P-1255 E HOSE (96-CM)  
  7G-7917 [16] PLUG-SEAL  
  7G-7918 [3] PLUG-SEAL  
  7G-7919 [5] PLUG-SEAL  
  7X-2639 E TUBE-HEAT SHRINK (50.8-MM DIA)(40-CM)  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  8N-1518 [2] PLUG AS-CONNECTOR (25-PIN)  
  8N-1521 [2] BELL AS-END  
  9X-6857 [16] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8N-1541 [5] SOCKET-CONNECTOR (12-GA TO 14-GA)  
  8N-1545 [1] SOCKET-CONNECTOR (8-GA)  
  8N-1549 [4] SOCKET-CONNECTOR (4-GA)  
  8T-8729 [21] PIN-CONNECTOR (16-GA TO 20-GA)  
  8T-8730 [75] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  8T-8737 [121] PLUG-SEAL  
  9W-0844 [18] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1054 [3] PLUG AS-CONNECTOR (4-PIN)  
  9X-1056 [5] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-3402 [180] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-5615 [2] SEAL (INTERFACE, 70-PIN)  
  9X-6772 [4] STRAP-CABLE  
  100-5041 [7] TERMINAL-RECEPTACLE (18-GA TO 20-GA)  
  119-3662 E TUBE-HEAT SHRINK (10.85-MM DIA)(72-CM)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(80-CM)  
  125-7875 E TUBE-HEAT SHRINK (7.44-MM DIA)(35-CM)  
  126-1768 [19] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  126-1774 [3] COVER-CONNECTOR  
  2L-8069 [4] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  131-1487 [1] TERMINAL AS (6-GA TO 8-GA)  
  131-1490 [1] TERMINAL AS (6-GA TO 8-GA)  
  2L-8079 [1] TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW)  
  147-1445 [1] PLUG AS-CONNECTOR (70-PIN)  
  147-1446 [1] PLUG AS-CONNECTOR (70-PIN)  
    (EACH PLUG AS INCLUDES)
  159-9322 [1] SEAL-O-RING  
  7N-9017 [3] TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW)  
  155-2255 [3] KIT-CONNECTING PLUG (12-PIN)  
  155-2270 [10] KIT-CONNECTING PLUG (2-PIN)  
  155-2260 [4] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [10] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  230-4013 [1] PLUG AS-CONNECTOR (3-PIN)  
  237-0227 [1] PLUG AS-CONNECTOR (3-PIN)  
    (EACH PLUG AS INCLUDES)
  264-7030 [1] SEAL-CONNECTOR  
  274-3774 [1] CAP-CONNECTOR  
  274-3781 [1] CAP-SEAL  
18. 335-4218 C [1] HARNESS AS-SENSOR (BRAKE ACCUMULATOR)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  9X-3401 [6] PIN-CONNECTOR (16-GA TO 18-GA)  
  237-0228 [1] RECEPTACLE AS-CONNECTOR  
19. 033-8248 C [2] CLIP (LOOP)  
20. 130-5300 C [11] CLIP  
21. 130-5301 [1] CLIP  
22. 132-5789 [4] CLIP (LADDER)  
23. 134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
24. 134-3355 [1] STRAP AS  
25. 134-3987 [2] CLIP (LOOP)  
26. 144-8344 [1] SPACER (11X19X20-MM THK)  
27. 166-0690 [2] BLOCK AS-MOUNTING  
28. 1S-0994 [1] CLIP (LOOP)  
29. 264-0460 M [1] STUD (M10X1.5X50-MM)  
30. 2F-7888 [4] SCREW-MACHINE (10-32X1.25-IN)  
31. 2V-3216 [1] CLIP (LOOP)  
32. 3B-4619 [2] PIN-COTTER  
33. 3E-5169 [1] GUARD-SWITCH  
34. 3E-5239 [1] RELAY AS (24-VOLT)(FUEL PUMP RELAY)  
34A. 3E-5239 [1] RELAY AS (24-VOLT)(A/C CLUTCH SOLENOID)  
34B. 3E-5239 [1] RELAY AS (24-VOLT)(BACKUP ALARM)  
34C. 3E-5239 [1] RELAY AS (24-VOLT)(SECONDARY STEERING)  
35. 3J-1907 [1] SEAL-O-RING  
36. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
37. 4D-7794 [1] CLIP  
38. 4D-9517 [1] CLIP (SLOT)  
39. 4P-7581 C [3] CLIP (LADDER)  
40. 4P-7582 [1] CLIP (LADDER)  
41. 4P-8134 C [2] CLIP (LADDER)  
42. 4S-1962 [1] CLIP (LOOP)  
43. 5C-7261 M [1] NUT (M8X1.25-THD)  
44. 5C-9553 M [4] BOLT (M6X1X16-MM)  
45. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
46. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
47. 5P-9085 [3] CLIP (LOOP)  
48. 5P-9297 [5] CLIP (LOOP)  
49. 6D-3479 [2] CLIP (LOOP)  
50. 6D-4244 [1] CLIP (LOOP)  
51. 6V-0894 [2] SEAL-O-RING  
52. 6V-3265 [2] CLIP  
53. 7C-4355 [1] CLIP  
54. 7D-7233 [5] CLIP (LOOP)  
55. 7K-1181 C [26] STRAP-CABLE  
56. 8F-6302 [4] BOLT (1/4-20X3.75-IN)  
57. 8M-2770 [2] CLIP (LOOP)  
58. 8M-2773 [4] CLIP (LOOP)  
59. 8T-4121 [39] WASHER-HARD (11X21X2.5-MM THK)  
60. 8T-4133 CM [5] NUT (M10X1.5-THD)  
61. 8T-4136 M [7] BOLT (M10X1.5X25-MM)  
62. 8T-4137 M [25] BOLT (M10X1.5X20-MM)  
63. 8T-4138 M [2] BOLT (M6X1X20-MM)  
64. 8T-4182 M [1] BOLT (M10X1.5X45-MM)  
65. 8T-4189 M [3] BOLT (M8X1.25X20-MM)  
66. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
67. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
68. 8T-4224 [3] WASHER-HARD (8.8X16X2-MM THK)  
69. 9M-4972 [4] CLIP (LOOP)  
70. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Operation and Maintenance Manual
Fuses - Replace
140M Motor Grader
Circuit Breakers - Reset
140M Motor Grader
Battery Disconnect Switch
140M Motor Grader
Engine Shutdown Switch
140M Motor Grader
Engine Shutdown Switch - Check
140M Motor Grader
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
Bypass Valve Installation for Improved Cold Start{1386, 1387, 1408, 3154, 5057}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
A Procedure to Calibrate the Steering on Certain Motor Graders{430S, 4313, 4343, 7300, 7451, 7506}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Procedure for Replacing Sensor Harnesses and Installing Harness Guards for the AWD Motor Speed Sensors on Certain Series M-Series Motor Graders{1408, 4351, 4803}
Procedure for Replacing Sensor Harnesses and Installing Harness Guards for the AWD Motor Speed Sensors on Certain Series M-Series Motor Graders{1408, 4351, 4803}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Selecting Correct Part Numbers For Sensors and Adapter Harnesses for Certain Machines and Engines{1408, 1439}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure to Prevent Damage to the Rear Chassis Harness Assembly on Certain Motor Graders{1408}
Procedure to Prevent Damage to the Rear Chassis Harness Assembly on Certain Motor Graders{1408}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Installation Procedure for Front Heated Window Glass on Certain M, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofitting a Right Hand Stamped Door with Heated Glass on Certain M Series, M Series 2, and M Series 3 Motor Graders {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Retrofit for the Heated Glass Wiring on Certain M, M-Series 2, and M-Series 3 Motor Graders with Pre-Phase I Cabs {1408, 7305, 7308, 7310}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation Procedure for the 192-7805 Seat Compressor Harness{1408, 7312, 7324}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
Installation of Automatic Differential Lock on Certain M-Series Motor Graders{1408}
Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}
Ground Locations for Certain M-Series and M-Series 2 Motor Graders{1408, 7423}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND INSTALLING CONNECTOR WEATHER SEALS ON CERTAIN 12M, 120M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Technical Information Bulletin
Procedure to Check for Connector Seals{1408, 7553}
Procedure to Check for Connector Seals{1408, 7553}
Wiring Issue of the Control Valve Group for the Front Lift{1408, 5051}
Wiring Issue of the Control Valve Group for the Front Lift{1408, 5051}
Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}
Incorrect Serviceability of the Harness on certain M Series Motor Graders{1408}
Specifications
Magnetic Switch (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System
Solenoid Valve (Hydraulic Fan)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System
Pressure Sensor (Brake Oil Accumulator) - Use with the <B>251-8256</B> Control Manifold Gp
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System
Temperature Sensor (Transmission Oil)
120M, 12M, 140M and 160M Motor Graders Power Train
Temperature Sensor (Hydraulic Oil)
12M, 140M and 160M Motor Graders Hydraulic and Steering System
Temperature Sensor (Hydraulic Oil)
120M, 140M and 160M Motor Graders All Wheel Drive
Speed Sensor (Transmission) - Intermediate
120M, 12M, 140M and 160M Motor Graders Power Train
Pressure Sensor (Secondary Steering)
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System
Pressure Switch (AWD Oil Filter Bypass) - Charge
120M, 140M and 160M Motor Graders All Wheel Drive
Toggle Switch (Ground Level Shutdown)
120M, 12M, 140M and 160M Motor Graders Machine Systems
Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems
Speed Sensor (Transmission) - Input and Output
120M, 12M, 140M and 160M Motor Graders Power Train
Ball Switch (Centershift Indicator)
120M, 12M, 140M and 160M Motor Graders Machine Systems
Speed Sensor (Piston Motor)
120M, 140M and 160M Motor Graders All Wheel Drive
Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train
Pressure Sensor (All Wheel Drive)
120M, 140M and 160M Motor Graders All Wheel Drive
Position Sensor (Articulation)
120M, 12M, 140M and 160M Motor Graders Machine Systems
Pressure Sensor (Brake Oil Accumulator)
12M, 140M and 160M Motor Graders Braking and Hydraulic Fan System
Wiring (Air Inlet Heater)
C9 Engines for Caterpillar Built Machines
Pressure Switch (Parking Brake)
120M, 12M, 140M and 160M Motor Graders Power Train
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Systems Operation
Pressure Switch (Refrigerant)
Air Conditioning and Heating R134a for All Caterpillar Machines
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT SUPPORT PROGRAM FOR REMOVING AIR CONDITIONING PRESSURE SWITCHES FROM DEALER STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING WASHERS TO PREVENT BINDING IN THE ARTICULATION LINKAGE ON CERTAIN 140M AND 160M MOTOR GRADER
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM TO IMPROVE COLD START CAPABILITY ON CERTAIN 120M, 12M, 140M, AND 160M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A TEMPERATURE SENSOR IN THE STEERING SYSTEM AND FLASHING NEW SOFTWARE ON CERTAIN 120M, 12M, 140M, 160M, 14M, 16M, AND 24M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 213-9100 BACKUP ALARM ASSEMBLY ON VARIOUS WHEELED EXCAVATORS, EXCAVATORS, TRACK-TYPE TRACTORS, OFF-HIGHWAY TRUCKS, WHEEL LOADERS, WHEELED DOZERS, SOIL COMPACTORS, PNEUMATIC COMPACTORS, ROAD RECLAIMERS AND MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FRONT AXLE ON CERTAIN 120M, 140M, AND 160M MOTOR GRADERS EQUIPPED WITH ALL WHEEL DRIVE (AWD)
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE STEERING CYLINDER SENSOR HARNESS ASSEMBLY ON CERTAIN 140M, 160M, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REROUTING THE REAR MAIN CHASSIS ELECTRICAL HARNESS ON CERTAIN 140M AND 160M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE CENTERSHIFT LOCK ON CERTAIN 120M, 120M SERIES 2, 12M, 12M SERIES 2, 140M, 140M SERIES 2, 160M, 160M SERIES 2, AND 14M MOTOR GRADERS
Testing and Adjusting
Electric Starting System - Test
C7 Engines for Caterpillar Built Machines
System Schematic
Machine Security System
Electrical Connector - Inspect
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Magnetic Switch (Secondary Steering Relay) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Secondary Steering System
Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Electrical Connector - Inspect
AccuGrade® GPS v11 for CD700
Wiring Harness (Open Circuit) - Test
AccuGrade® GPS v11 for CD700
Wiring Harness (Short Circuit) - Test
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Wiring Harness (Open Circuit) - Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Wiring Harness (Short Circuit) - Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Electrical Connector - Inspect
Cat® Grade Control Cross Slope System for Motor Graders
Wiring Harness (Open Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System
Wiring Harness (Short Circuit) - Test
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System
Electrical Connector - Inspect
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Electrical Connector - Inspect
AccuGrade® (CD610)
Wiring Harness (Open Circuit) - Test
AccuGrade® (CD610)
Wiring Harness (Short Circuit) - Test
AccuGrade® (CD610)
Connector Contact Description
AccuGrade® (CD610)
Connector Contact Description
AccuGrade® GPS v11 for CD700
Electrical Connector - Inspect
Machine Security System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Troubleshooting
Electrical Component and Connector Locations
Machine Security System
Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0070 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0070 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0144 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0144 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0144 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0420 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0420 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0420 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0444 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0444 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0444 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Switch Circuits
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 082 - CID 0490 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 0490 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 027 - CID 0368 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0368 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Wiring Information
C9 Engines for Motor Graders
Electrical Connectors - Inspect
C9 Engines for Motor Graders
Connector Locations
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
Electrical Power Supply
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 114 - CID 1396 - FMI 03
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 1396 - FMI 05
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 114 - CID 1396 - FMI 06
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 027 - CID 2304 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2304 - FMI 05
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 2304 - FMI 06
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0627 - FMI 03
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
MID 027 - CID 0627 - FMI 04
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Power Supply Circuit of Electronic Control Module
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Power Train Electronic Control System
Connector Locations
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Power Supply Circuit of Electronic Control Module
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Indicator Lamp Does Not Illuminate During the Power Up Self Test
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Indicator Lamp Is On Continuously
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Switch Circuits
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
Electrical Connectors
C9 Engines for Motor Graders
Connector Locations
120M, 12M, 140M, 14M, 160M, 16M and 24M Motor Graders Monitoring System
MID 075 - CID 0517 - FMI 03
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
MID 075 - CID 0517 - FMI 04
120M, 12M, 140M and 160M Motor Graders All Wheel Drive Electronic Control System
CAN Data Link
AccuGrade® CD700 Grade Control System (GPS/ATS/Laser/Cross/Slope/Sonic) v10.8 for Motor Graders
MID 145 - CID 0650 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 145 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 082 - CID 1326 - FMI 02
120M, 12M, 140M, 14M, 160M and 16M Motor Graders Implement Electronic Control System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Battery - Remove and Install
140M Motor Grader Engine Supplement
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
A new Cab Wiring Group Updates the Cab Arrangement {1408, 7301, 7332}
2008/10/13
A New Cable for the Alternator is Available for 140M Motor Graders {1408, 1417, 1422, 1463}
2009/04/20
Improvements to the Fuel Sender Group {1273, 1408, 6201, 7481, 7857}
2010/10/25
A New Circuit Breaker and a Cover are Available for the High Intensity Discharge Lights on Certain Motor Graders {1420, 1434}
2009/11/19
New Wiring Harnesses Are Now Used on Certain M-Series Motor Graders {1408}
2010/07/19
A New Design for the Secondary Steering Relay is Now Used on Some M-Series Motor Graders {1408, 4344, 7499}
2009/12/24
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
New Steering Cylinder Sensor Harnesses are now Available for Certain M Series Motor Graders {1408}
2011/05/09
Heated Anti-Icing Glass is Now Available for Certain M and M Series 2 Motor Graders {1408, 7305, 7308, 7310}
2011/12/26
Improvements Have Been Made to the Steering Position Sensing System on Certain M Series Motor Graders {1408, 430S, 7620}
2011/12/14
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
New Joystick Kit Is Now Available as a Service Replacement for Push Button Faceplate on Certain M Series and M Series 2 Motor Graders {1408, 3168, 4343, 5063, 5705}
2013/06/13
An Improved Starting Motor Is Used on Certain C7 Machine Engines {1408, 1453}
2013/12/05
A New Flasher Assembly for the Turn Signal Is Now Available for Certain M and M Series 2 Motor Graders {1408}
2014/03/31
An Improved Routing Process is Now Available When Replacing 192-7805 Harness As in TLV1 Seat Suspensions on Certain Machines {1408, 7312, 7324}
2013/11/12

Caterpillar Parts SIS Catalog 140M :

WIRING GP-MONITOR
253-1964 WIRING GP-MONITOR
WIRING GP-LIGHTING
292-1874 WIRING GP-LIGHTING
WIRING GP-LIGHTING
291-2909 WIRING GP-LIGHTING
WIRING GP-HEATER
275-0596 WIRING GP-HEATER
WIRING GP-HEATER
269-3410 WIRING GP-HEATER
WIRING GP-HEATER
259-3131 WIRING GP-HEATER
WIRING GP-GRADE CONTROL
356-3647 WIRING GP-GRADE CONTROL
WIRING GP-GRADE CONTROL
356-3647 WIRING GP-GRADE CONTROL
WIRING GP-MONITOR
253-1967 WIRING GP-MONITOR
WIRING GP-MONITOR
360-5872 WIRING GP-MONITOR
WIRING GP-POWER RECEPTACLE
269-4152 WIRING GP-POWER RECEPTACLE
WIRING GP-REAR
233-4601 WIRING GP-REAR
WIRING GP-REAR
233-4602 WIRING GP-REAR
WIRING GP-REAR
264-7522 WIRING GP-REAR
WIRING GP-REAR
264-7522 WIRING GP-REAR
WIRING GP-REAR
264-7522 WIRING GP-REAR

Truck sale:

Caterpillar 140M2, Construction
176,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
164,000 
Caterpillar 140M2, Construction
- motor graders
HOLT CAT
Caterpillar 140M2, Construction
139,800 
Caterpillar 140M2, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Caterpillar TRADE-IN 140M2, Construction
 
Caterpillar TRADE-IN 140M2, Construction
- motor graders
TRACTORS AND EQUIPMENT (I.T.E.) LTD.
Israel
Caterpillar 140M2, Construction
167,614 
Caterpillar 140M2, Construction
- motor graders
CAVPOWER
Australia
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.