COOLING SYSTEM
FAN GPLINES GP-WATER
PUMP GP-WATER
RADIATOR GP
AIR INLET AND EXHAUST SYSTEM
AIR CLEANER GPCOOLING SYSTEM
FAN GP
#SEBP43770040
265-3503: FAN GP-BLOWER
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 245-9344 | [1] | FAN AS (10-BLADE, BOLT MTG DIA 152-MM) | |
| 2. | 265-3557 | [1] | PLATE AS | |
| 3. | 281-3588 | [1] | DRIVE AS-FAN (FLUID CLUTCH) | |
| 186-3735 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 7X-0818 M | [6] | BOLT (M8X1.25X45-MM) | |
| 5. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 6. | 8T-4200 M | [3] | BOLT (M8X1.25X16-MM) | |
| 7. | 8T-4224 | [15] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP43770041
266-6331: FAN GP-SUCTION
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-0796 | [10] | LOCKWASHER (10.2X18.4X2.5-MM THK) | |
| 2. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 3. | 266-6332 | [1] | BRACKET | |
| 4. | 266-6333 | [1] | COVER | |
| 5. | 266-6336 | [1] | WASHER (13X49X8-MM THK) | |
| 6. | 266-6334 | [2] | BEARING | |
| 7. | 212-8596 | [2] | BUSHING | |
| 8. | 266-6335 | [1] | SPACER (40.8X50.8X27-MM THK) | |
| 9. | 266-6338 M | [1] | BOLT (M12X1.25X25-MM) | |
| 10. | 8T-4182 M | [4] | BOLT (M10X1.5X45-MM) | |
| M | METRIC PART | |||
#SEBP43770042
212-8614: LINES GP-WATER
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-6912 M | [3] | BOLT (M8X1.25X50-MM) | |
| 2. | 297-9314 | [1] | SENDER-TEMPERATURE | |
| 3. | 5I-7572 | [1] | GASKET | |
| 4. | 5I-7735 | [1] | GASKET | |
| 5. | 5I-8010 | [1] | REGULATOR-TEMPERATURE (COOLANT) | |
| 6. | 5I-8056 | [1] | PLUG | |
| 7. | 095-8638 | [5] | WASHER-SPRING | |
| 8. | 222-8214 | [6] | GASKET | |
| 9. | 222-8216 | [1] | PIPE AS | |
| 10. | 125-2981 | [1] | COVER AS | |
| 10A. | 5I-7655 | [1] | PIPE | |
| 11. | 154-9024 | [1] | VALVE-SAMPLING (COOLENT) | |
| 12. | 239-6624 | [1] | ELBOW | |
| 13. | 2S-3440 | [2] | CLAMP-HOSE | |
| 14. | 5I-7699 | [1] | HOSE | |
| 15. | 095-1663 | [1] | SEAL-O-RING | |
| 16. | 8T-4908 M | [1] | BOLT (M8X1.25X25-MM) | |
| 17. | 096-9532 | [1] | WASHER (15.8X22.5X2-MM THK) | |
| 18. | 8T-4177 M | [1] | BOLT (M8X1.25X90-MM) | |
| 19. | 196-7975 | [1] | SENSOR GP-TEMPERATURE (OUT SIDE AIR) | |
| 20. | 157-0670 | [1] | CAP-DUST (COOLENT SAMPLING VALVE) | |
| 21. | 183-8222 | [1] | PLUG | |
| 22. | 096-9438 | [12] | STUD | |
| 23. | 212-8489 | [12] | NUT | |
| M | METRIC PART | |||
#SEBP43770043
212-8555: PUMP GP-WATER
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-6633 | [1] | PUMP GP-WATER | |
| 2. | 5I-7696 | [1] | FLANGE | |
| 3. | 178-6635 | [1] | SHAFT | |
| 4. | 8T-9598 | [1] | RING-RETAINING | |
| 6. | 178-6634 | [1] | IMPELLER | |
| 7. | 5I-7697 | [1] | SPACER (28-MM) | |
| 8. | 178-6636 | [1] | SEAL | |
| 9. | 5L-6326 | [1] | BALL BEARING (62-MM OD) | |
| 10. | 125-2947 | [1] | WASHER (1-MM THK) | |
| 11. | 2H-3814 | [1] | BALL BEARING (52-MM OD) | |
| 12. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 13. | 7X-0796 | [7] | LOCKWASHER (10.2X18.4X2.5-MM THK) | |
| 14. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP43770044
230-2976: RADIATOR & HYD OIL COOLER GP
230-2976 RADIATOR & HYD OIL COOLER GP
S/N SDC1-UP
PART OF 239-6564 INSTALLATION AR-ENGINE
S/N SDC1-UP
PART OF 239-6564 INSTALLATION AR-ENGINE
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 7I-2673 | [1] | STRAP-CABLE | |
| 3. | 8T-4984 | [4] | CLAMP-HOSE | |
| 4. | 096-4035 | [1] | CLIP | |
| 5. | 099-6607 | [1] | BAND | |
| 6. | 5P-9909 D | SEAL (0.87-M) | ||
| 6A. | 5P-9909 D | SEAL (0.14-M) | ||
| 7. | 178-6450 | [4] | SPACER (17X35X30-MM THK) | |
| 8. | 265-3573 Y | [1] | RADIATOR & HYD OIL COOLER GP | |
| 9. | 245-9191 | [1] | PLATE AS | |
| 10. | 245-9193 | [1] | HOSE (UPPER RADIATOR) | |
| 11. | 245-9194 | [1] | HOSE-RADIATOR | |
| 12. | 245-9205 | [1] | TANK AS-COOLANT (RECOVERY) | |
| 171-3369 | [1] | CAP AS (COOLANT RECOVERY) | ||
| 13. | 245-9348 | [1] | GUARD AS (UPPER) | |
| 14. | 245-9349 | [1] | GUARD AS (LOWER) | |
| 15. | 245-9352 | [1] | SEAL | |
| 16. | 265-3509 | [1] | BRACKET AS | |
| 17. | 3P-9847 | [1] | CLIP | |
| 18. | 7X-2554 M | [4] | BOLT (M16X2X70-MM) | |
| 19. | 7X-7729 | [11] | WASHER (11X25X3-MM THK) | |
| 20. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 21. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 22. | 8T-4137 M | [10] | BOLT (M10X1.5X20-MM) | |
| 23. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 24. | 8T-4200 M | [2] | BOLT (M8X1.25X16-MM) | |
| 25. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 27. | 7Y-1976 E | HOSE-WATER (40-CM) | ||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP43770045
265-3573: RADIATOR & HYD OIL COOLER GP
265-3573 RADIATOR & HYD OIL COOLER GP
S/N SDC1-UP
BASIC
PART OF 230-2976 RADIATOR & HYD OIL COOLER GP
S/N SDC1-UP
BASIC
PART OF 230-2976 RADIATOR & HYD OIL COOLER GP
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5D-8159 | [4] | PIN AS | |
| 2. | 093-5432 M | [1] | VALVE AS-DRAIN (COOLANT) | |
| 3. | 096-4035 | [2] | CLIP | |
| 4. | 210-8117 | [2] | SEAL | |
| 5. | 210-8128 | [1] | PLATE AS | |
| 6. | 245-9212 | [1] | CAP AS-RADIATOR | |
| 7. | 245-9216 | [2] | BOSS | |
| 8. | 245-9217 | [2] | CUSHION-RUBBER | |
| 9. | 245-9218 | [2] | CUSHION-RUBBER | |
| 10. | 245-9276 | [2] | SEAL | |
| 11. | 265-3624 | [1] | CORE AS-RADIATOR | |
| 12. | 265-3625 | [1] | CORE AS-OIL COOLER (HYDRAULIC) | |
| 13. | 265-3626 | [1] | AFTERCOOLER AS | |
| 14. | 265-3627 | [1] | FRAME AS | |
| 15. | 265-3629 | [2] | SEAL | |
| 16. | 265-3630 | [2] | SEAL | |
| 17. | 265-3631 | [2] | SEAL | |
| 18. | 265-3632 | [3] | SEAL | |
| 19. | 265-3633 | [1] | SEAL | |
| 20. | 265-3634 | [1] | SCREEN AS (OIL COOLER) | |
| 21. | 265-3635 | [1] | SCREEN AS (RADIATOR) | |
| 22. | 265-3636 | [1] | PLATE AS | |
| 23. | 265-3637 | [1] | TUBE AS | |
| 24. | 265-3638 | [1] | SEAL | |
| 25. | 265-3641 | [1] | SHROUD AS-RADIATOR | |
| 26. | 265-3642 | [1] | SEAL | |
| 27. | 265-3643 | [1] | SEAL | |
| 28. | 281-3486 | [1] | PLATE AS | |
| 29. | 281-3488 | [2] | SHEET-RUBBER | |
| 30. | 281-3568 | [2] | SEAL | |
| 31. | 095-1543 | [2] | SEAL-O-RING | |
| 32. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 33. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 34. | 8T-4189 M | [20] | BOLT (M8X1.25X20-MM) | |
| 35. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 36. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 37. | 8T-4224 | [20] | WASHER-HARD (8.8X16X2-MM THK) | |
| 38. | 7Y-1976 E | HOSE-WATER (190-CM) | ||
| 38A. | 7Y-1976 E | HOSE-WATER (8-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP43770046
109-9313: AIR CLEANER & MOUNTING GP
109-9313 AIR CLEANER & MOUNTING GP
S/N SDC1-99999
PART OF 239-6564 INSTALLATION AR-ENGINE
S/N SDC1-99999
PART OF 239-6564 INSTALLATION AR-ENGINE
For full view, you need register
#SEBP43770047
240-3944: AIR CLEANER AR
For full view, you need register
#SEBP43770048
124-1711: AIR CLEANER GP
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5L-3233 | [1] | FITTING-CONNECTOR | |
| 2. | 112-9717 | [1] | VALVE-DUST (AIR CLEANER) | |
| 3. | 131-8821 | [1] | FILTER ELEMENT AS-AIR (SECONDARY) | |
| 4. | 131-8822 | [1] | FILTER ELEMENT AS-AIR (PRIMARY) | |
| 5. | 131-8826 | [1] | FILM-INSTRUCTION (TOP, AIR CLEANER COVER) | |
| 6. | 131-8932 | [4] | LATCH | |
| 7. | 184-3983 | [1] | COVER AS | |
| 131-8824 | [1] | SEAL (266.7-MM ID X 6.9-MM THK) | ||
| -OR- | ||||
| 168-0792 | [1] | SEAL (280.1-MM ID X 5-MM THK) | ||
| 8. | 255-2966 | [1] | INDICATOR AS-AIR FILTER CHANGE (AIR RESTRICTION) | |
#SEBP43770049
239-6566: AIR CLEANER GP
239-6566 AIR CLEANER GP
S/N SDC1-UP
PART OF 240-3944 AIR CLEANER AR
Type 1
AN ATTACHMENT
S/N SDC1-UP
PART OF 240-3944 AIR CLEANER AR
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 323D L EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4987 | [1] | CLAMP-HOSE | |
| 2. | 116-2659 | [1] | DAMPER | |
| 3. | 130-3280 | [1] | PRECLEANER AS | |
| 174-5415 | [1] | CLAMP | ||
| 4. | 134-7089 | [1] | CLAMP | |
| 5. | 239-6612 Y | [1] | AIR CLEANER GP | |
| 6. | 266-6152 | [1] | HOSE-AIR | |
| 7. | 266-6154 | [1] | TUBE AS | |
| 8. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 9. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
