IMPLEMENTS
BULLDOZER GPC-FRAME GP
LINES GP-GREASE
IMPLEMENTS
BULLDOZER GP
#SEBP44451000
334-1805: BULLDOZER AR-PWR ANGLE & TILT
334-1805 BULLDOZER AR-PWR ANGLE & TILT
S/N KSB1-UP; RCW1-UP
Type 1
AN ATTACHMENT
S/N KSB1-UP; RCW1-UP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-8893 Y | [1] | CYLINDER GP-TILT | |
| 2. | 448-1988 Y | [2] | CYLINDER GP-ANGLING | |
| 3. | 312-7759 Y | [1] | C-FRAME GP | |
| 4. | 312-7767 Y | [1] | LINK GP-PITCH | |
| 5. | 312-7769 Y | [1] | BLADE GP-ANGLING | |
| 6. | 325-9754 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 325-9758 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 8. | 334-1790 Y | [1] | LINES GP-ANGLE & TILT | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451001
334-1805: BULLDOZER AR-PWR ANGLE & TILT
334-1805 BULLDOZER AR-PWR ANGLE & TILT
S/N KSB1-UP; RCW1-UP
Type 2
AN ATTACHMENT
S/N KSB1-UP; RCW1-UP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-8893 Y | [1] | CYLINDER GP-TILT | |
| 2. | 448-1988 Y | [2] | CYLINDER GP-ANGLING | |
| 3. | 312-7759 Y | [1] | C-FRAME GP | |
| 4. | 381-1880 CY | [1] | LINK GP-PITCH | |
| 5. | 312-7769 Y | [1] | BLADE GP-ANGLING | |
| 6. | 325-9754 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 325-9758 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 8. | 334-1790 Y | [1] | LINES GP-ANGLE & TILT | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451002
334-1809: BULLDOZER AR-PWR ANGLE & TILT
334-1809 BULLDOZER AR-PWR ANGLE & TILT
S/N SEC1-UP
Type 1
AN ATTACHMENT
S/N SEC1-UP
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-8893 Y | [1] | CYLINDER GP-TILT | |
| 2. | 344-5133 Y | [2] | CYLINDER GP-ANGLING | |
| 3. | 311-7877 Y | [1] | C-FRAME GP | |
| 4. | 311-7886 Y | [1] | BLADE GP-ANGLING | |
| 5. | 312-7767 Y | [1] | LINK GP-PITCH | |
| 6. | 325-9755 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 325-9759 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 8. | 334-1810 Y | [1] | LINES GP-ANGLE & TILT | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451003
334-1809: BULLDOZER AR-PWR ANGLE & TILT
334-1809 BULLDOZER AR-PWR ANGLE & TILT
S/N SEC1-UP
Type 2
AN ATTACHMENT
S/N SEC1-UP
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-8893 Y | [1] | CYLINDER GP-TILT | |
| 2. | 344-5133 Y | [2] | CYLINDER GP-ANGLING | |
| 3. | 311-7877 Y | [1] | C-FRAME GP | |
| 4. | 311-7886 Y | [1] | BLADE GP-ANGLING | |
| 5. | 381-1880 CY | [1] | LINK GP-PITCH | |
| 6. | 325-9755 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 325-9759 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 8. | 334-1810 Y | [1] | LINES GP-ANGLE & TILT | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451004
334-1809: BULLDOZER AR-PWR ANGLE & TILT
334-1809 BULLDOZER AR-PWR ANGLE & TILT
S/N SEC1-UP
Type 3
AN ATTACHMENT
S/N SEC1-UP
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 227-8893 Y | [1] | CYLINDER GP-TILT | |
| 2. | 448-1988 CY | [2] | CYLINDER GP-ANGLING | |
| 3. | 311-7877 Y | [1] | C-FRAME GP | |
| 4. | 311-7886 Y | [1] | BLADE GP-ANGLING | |
| 5. | 381-1880 Y | [1] | LINK GP-PITCH | |
| 6. | 325-9755 Y | [1] | CYLINDER & LINES GP-LIFT (LH) | |
| 7. | 325-9759 Y | [1] | CYLINDER & LINES GP-LIFT (RH) | |
| 8. | 334-1810 Y | [1] | LINES GP-ANGLE & TILT | |
| 8T-7371 F | [1] | PLATE-SERIAL NUMBER (BLADE) | ||
| (ON UPPER RH CORNER OF BLADE) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451005
311-7877: C-FRAME GP
311-7877 C-FRAME GP
S/N SEC1-UP
PART OF 334-1809 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N SEC1-UP
PART OF 334-1809 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 9J-4782 | [2] | PROTECTOR | |
| 3. | 9W-7602 B | [52] | SHIM (0.8-MM THK) | |
| 4. | 104-4817 | [1] | PIN | |
| 5. | 193-3063 | [2] | CAP AS-BEARING | |
| 6. | 195-6283 M | [4] | NUT-SQUARE (M30X3.5-THD) | |
| 7. | 223-3279 | [1] | RETAINER | |
| 8. | 226-7190 | [2] | PIN | |
| 9. | 226-7191 | [2] | RETAINER | |
| 10. | 229-1516 | [2] | SPACER (64X72X18-MM THK) | |
| 11. | 229-1517 | [4] | SPACER (50.8X57.15X18-MM THK) | |
| 12. | 245-1168 | [1] | PIN | |
| 13. | 282-6598 | [4] | SPACER (50.8X57.15X4.73-MM THK) | |
| 14. | 282-6604 | [2] | PIN | |
| 15. | 292-6035 | [1] | PLATE-RETAINER | |
| 16. | 311-7878 | [1] | C-FRAME AS | |
| 16A. | 1K-6985 | [4] | RING-RETAINING | |
| 16B. | 9M-1328 | [2] | BEARING-SELF-ALIGNING | |
| 16C. | 274-1715 | [2] | STEP AS | |
| 16D. | 233-3642 | [1] | TRUNNION AS | |
| 16E. | 282-6605 | [2] | BEARING | |
| 17. | 313-9790 | [2] | SPACER (50.8X57.15X35-MM THK) | |
| 18. | 178-2992 M | [4] | BOLT (M30X3.5X220-MM) | |
| 19. | 8T-4123 | [3] | WASHER (22X35X3.5-MM THK) | |
| 20. | 7X-2543 M | [4] | BOLT (M10X1.5X120-MM) | |
| 21. | 8T-6430 M | [3] | BOLT (M20X2.5X50-MM) | |
| 22. | 9X-2327 | [4] | WASHER (11X18.5X2.5-MM THK) | |
| 23. | 9X-8258 | [4] | WASHER (33X56X6-MM THK) | |
| 24. | 8T-7338 M | [1] | BOLT (M16X2X45-MM) | |
| 25. | 7X-0515 | [1] | WASHER-HARD (17X35X5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP44451006
312-7759: C-FRAME GP
312-7759 C-FRAME GP
S/N KSB1-UP; DTD1-UP; RCW1-UP
PART OF 423-8710 BULLDOZER AR, 334-1804, 334-1805 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
S/N KSB1-UP; DTD1-UP; RCW1-UP
PART OF 423-8710 BULLDOZER AR, 334-1804, 334-1805 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9J-4782 | [2] | PROTECTOR | |
| 2. | 9X-2327 | [4] | WASHER (11X18.5X2.5-MM THK) | |
| 3. | 104-4817 | [1] | PIN | |
| 4. | 193-3063 | [2] | CAP AS-BEARING | |
| 5. | 195-6283 M | [4] | NUT-SQUARE (M30X3.5-THD) | |
| 6. | 223-3279 | [1] | RETAINER | |
| 7. | 226-7190 | [2] | PIN | |
| 8. | 226-7191 | [2] | RETAINER | |
| 9. | 229-1516 | [2] | SPACER (64X72X18-MM THK) | |
| 10. | 229-1517 | [4] | SPACER (50.8X57.15X18-MM THK) | |
| 11. | 245-1168 | [1] | PIN | |
| 12. | 282-6598 | [4] | SPACER (50.8X57.15X4.73-MM THK) | |
| 13. | 282-6604 | [2] | PIN | |
| 14. | 292-6035 | [1] | PLATE-RETAINER | |
| 15. | 312-7760 | [1] | C-FRAME AS | |
| 15A. | 1K-6985 | [4] | RING-RETAINING | |
| 15B. | 9M-1328 | [2] | BEARING-SELF-ALIGNING | |
| 15C. | 274-1715 | [2] | STEP AS | |
| 15D. | 233-3642 | [1] | TRUNNION AS | |
| 15E. | 282-6605 | [2] | BEARING | |
| 16. | 313-9790 | [2] | SPACER (50.8X57.15X35-MM THK) | |
| 17. | 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | |
| 18. | 3E-9850 M | [4] | BOLT (M30X3.5X220-MM) | |
| 19. | 7X-0515 | [3] | WASHER-HARD (17X35X5-MM THK) | |
| 20. | 7X-2543 M | [4] | BOLT (M10X1.5X120-MM) | |
| 21. | 8T-4123 | [1] | WASHER (22X35X3.5-MM THK) | |
| 22. | 8T-6430 M | [1] | BOLT (M20X2.5X50-MM) | |
| 23. | 8T-7338 M | [3] | BOLT (M16X2X45-MM) | |
| 24. | 9X-8258 | [4] | WASHER (33X56X6-MM THK) | |
| 25. | 9W-7602 B | [52] | SHIM (0.8-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP44451007
362-2183: LINES GP-GREASE
362-2183 LINES GP-GREASE
S/N KSB1-319; DTD1-197; RCW1-266
PART OF 324-3021 CHASSIS AR
S/N KSB1-319; DTD1-197; RCW1-266
PART OF 324-3021 CHASSIS AR
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-6915 | [1] | ADAPTER-BULKHEAD | |
| 2. | 9R-6307 | [1] | SPACER (11X28X12-MM THK) | |
| 3. | 347-0162 | [1] | PLATE | |
| 4. | 362-2184 I | [1] | HOSE AS | |
| 5. | 124-0174 | [1] | CLIP (LOOP) | |
| 6. | 148-8316 | [1] | CONNECTOR AS | |
| 6V-8647 | [1] | CONNECTOR | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 7. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 8. | 6V-8397 | [1] | SEAL-O-RING | |
| 9. | 6V-9168 | [1] | NUT (11/16-16-THD) | |
| 10. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 12. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP44451008
362-2183: LINES GP-GREASE
362-2183 LINES GP-GREASE
S/N KSB320-1124; DTD198-1074; RCW267-1099
PART OF 324-3021 CHASSIS AR, 378-3899 LINES GP-GREASE
ALSO AN ATTACHMENT
S/N KSB320-1124; DTD198-1074; RCW267-1099
PART OF 324-3021 CHASSIS AR, 378-3899 LINES GP-GREASE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8C-6915 | [1] | ADAPTER-BULKHEAD | |
| 2. | 9R-6307 | [1] | SPACER (11X28X12-MM THK) | |
| 3. | 347-0162 | [1] | PLATE | |
| 4. | 377-0651 CI | [1] | HOSE AS | |
| 5. | 124-0174 C | [2] | CLIP (LOOP) | |
| 6. | 148-8316 | [1] | CONNECTOR AS | |
| 6V-8647 | [1] | CONNECTOR | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 7. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 8. | 6V-8397 | [1] | SEAL-O-RING | |
| 9. | 6V-9168 | [1] | NUT (11/16-16-THD) | |
| 10. | 8T-4121 C | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 11. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 12. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 13. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 14. | 8T-4137 CM | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP44451009
378-3899: LINES GP-GREASE
378-3899 LINES GP-GREASE -HIGH SPEED OIL CHANGE
S/N KSB1125-UP; DTD1075-UP; RCW1100-UP
AN ATTACHMENT
S/N KSB1125-UP; DTD1075-UP; RCW1100-UP
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SISInformation:
IMPLEMENTS
BULLDOZER GP
Special Instruction
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Spherical Bearings for Bulldozers and Rippers{7551, 6050, 6313}
Service Magazine
