HYDRAULIC SYSTEM
LINES GP-RIPPERWORK TOOLS
RIPPER GPWINCH GP
RIPPER GP
GROUND ENGAGING TOOLS (G.E.T.)
HYDRAULIC SYSTEM
LINES GP-RIPPER
#SEBP44451240
389-1493: KIT-RETROFIT
389-1493 KIT-RETROFIT -RIPPER
S/N KSB1-UP; DTD1-UP; RCW1-UP
FOR USE WITH FUEL TANK GUARD
FIELD INSTALLATION
S/N KSB1-UP; DTD1-UP; RCW1-UP
FOR USE WITH FUEL TANK GUARD
FIELD INSTALLATION
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 346-0493 Y | [1] | VALVE GP-COUNTERBALANCE | ||
| 369-2637 | [1] | MANIFOLD GP-VALVE | ||
| 195-2628 | [1] | VALVE-NEEDLE | ||
| 366-8434 | [1] | BRACKET AS | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 6V-9969 | [1] | COUPLING AS-PERMANENT | ||
| 6V-9971 | [1] | COUPLING AS-PERMANENT | ||
| 323-6157 | [2] | COUPLING AS-PERMANENT | ||
| 323-6162 | [1] | COUPLING AS-PERMANENT | ||
| 323-6164 | [1] | COUPLING AS-PERMANENT | ||
| 330-0097 | [2] | COUPLING AS-PERMANENT | ||
| 371-4293 | [1] | GUARD AS-FUEL TANK | ||
| 7X-2534 M | [2] | BOLT (M6X1X50-MM) | ||
| 8T-4184 M | [2] | BOLT (M12X1.75X45-MM) | ||
| 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | ||
| 8T-4910 M | [2] | BOLT (M12X1.75X60-MM) | ||
| 9R-2216 | [2] | BOSS | ||
| 7G-3833 | [1] | CLIP (TAB) | ||
| 7G-3834 | [1] | CLIP (SLOT) | ||
| 174-5907 | [1] | CLIP (LOOP) | ||
| 275-1442 | [1] | CLIP (TAB) | ||
| 275-1443 | [1] | CLIP (SLOT) | ||
| 6V-8637 | [1] | CONNECTOR | ||
| 6V-8641 | [2] | CONNECTOR | ||
| 8T-0076 | [1] | CONNECTOR | ||
| 124-2111 | [1] | COUPLING-PERMANENT | ||
| 124-2158 | [1] | COUPLING-PERMANENT | ||
| 6V-8723 | [1] | ELBOW | ||
| 6V-8724 | [1] | ELBOW | ||
| 6V-9007 | [1] | ELBOW | ||
| 8T-0119 | [1] | ELBOW | ||
| 9X-2134 | [1] | ELBOW | ||
| 7G-3832 | [1] | GROMMET | ||
| 333-4609 | [1] | GROMMET | ||
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 2M-9780 | [2] | SEAL-O-RING | ||
| 3D-2824 | [2] | SEAL-O-RING | ||
| 3J-1907 | [4] | SEAL-O-RING | ||
| 3K-0360 | [3] | SEAL-O-RING | ||
| 4J-0520 | [2] | SEAL-O-RING | ||
| 4J-5477 | [2] | SEAL-O-RING | ||
| 6V-8397 | [4] | SEAL-O-RING | ||
| 6V-9746 | [2] | SEAL-O-RING | ||
| 7X-7729 | [4] | WASHER (11X25X3-MM THK) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| 053-4679 | [1] | WASHER (13.5X44.45X10-MM THK) | ||
| 5P-1076 | [3] | WASHER-HARD (13.5X30X4-MM THK) | ||
| 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451241
391-2257: KIT-RETROFIT
391-2257 KIT-RETROFIT
S/N KSB1-UP; DTD1-UP; RCW1-UP
FOR USE WITH ROPS MOUNTED A/C
FIELD INSTALLATION
S/N KSB1-UP; DTD1-UP; RCW1-UP
FOR USE WITH ROPS MOUNTED A/C
FIELD INSTALLATION
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 424-7225 Y | [1] | CONDENSER GP-REFRIGERANT | ||
| 348-8397 | [1] | BRACKET AS | ||
| 7K-3176 | [2] | COUPLING AS-REFRIGERANT (SELF-SEALING) | ||
| 349-5184 | [2] | GUARD AS | ||
| 337-9000 | [1] | HARNESS AS-HEATER & AIR COND | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9X-3402 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1768 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 325-1683 | [1] | HOSE AS | ||
| 325-1684 | [1] | HOSE AS | ||
| 348-0322 | [1] | HOSE AS | ||
| 348-0323 | [1] | HOSE AS | ||
| 348-4203 | [1] | SUPPORT AS | ||
| 5P-3947 | [2] | ADAPTER | ||
| 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | ||
| 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | ||
| 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | ||
| 8T-4183 M | [12] | BOLT (M12X1.75X40-MM) | ||
| 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | ||
| 8T-4195 M | [12] | BOLT (M10X1.5X30-MM) | ||
| 8T-6466 M | [1] | BOLT (M10X1.5X60-MM) | ||
| 8T-6912 M | [6] | BOLT (M8X1.25X50-MM) | ||
| 1S-6420 | [1] | CLIP | ||
| 4P-7581 | [1] | CLIP (LADDER) | ||
| 4P-8134 | [1] | CLIP (LADDER) | ||
| 5K-5338 | [9] | CLIP (LOOP) | ||
| 5P-4295 | [2] | CLIP | ||
| 9M-8406 | [1] | CLIP (LOOP) | ||
| 132-5789 | [1] | CLIP (LADDER) | ||
| 156-6175 | [1] | CLIP (LADDER) | ||
| 336-6482 | [2] | CLIP (LOOP) | ||
| 4H-2558 | [1] | GROMMET | ||
| 8T-9471 | [1] | GROMMET | ||
| 300-6714 | [12] | MOUNT | ||
| 5C-7261 M | [6] | NUT (M8X1.25-THD) | ||
| 178-3336 M | [4] | NUT-HEX FLANGE (M8X1.25-THD) | ||
| 055-1828 | [1] | PLUG-PLASTIC | ||
| 327-0282 | [4] | SEAL-INTEGRAL (1/2-IN) | ||
| 9X-7383 | [4] | SEAL-O-RING | ||
| 6T-0614 | [1] | SPACER (5.56X25.4X41-MM THK) | ||
| 091-9035 | [1] | SPACER (11X25X20-MM THK) | ||
| 322-4479 | [6] | SPACER (8.2X12.7X24.8-MM THK) | ||
| 7X-7729 | [2] | WASHER (11X25X3-MM THK) | ||
| 8T-4121 | [20] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 8T-7971 | [12] | WASHER-HARD (13.5X25.5X5-MM THK) | ||
| 9N-0869 | [18] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451242
224-4454: MOUNTING GP-RIPPER
224-4454 MOUNTING GP-RIPPER
S/N 1EH1-UP
PART OF 224-4449, 378-3836 RIPPER AR
AN ATTACHMENT
S/N 1EH1-UP
PART OF 224-4449, 378-3836 RIPPER AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1U-0300 | [1] | BRACKET AS | |
| 3G-9995 | [2] | PLATE | ||
| 2. | 1U-0301 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 2K-6279 | [1] | BOSS | ||
| 3. | 7T-1975 | [1] | BRACKET AS | |
| 3G-9995 | [2] | PLATE | ||
| 4. | 9N-4449 B | [12] | SPACER (68X121X1.5-MM THK) | |
| 5. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| 6. | 9W-0609 | [4] | SPACER (53X100X35-MM THK) | |
| 7. | 1U-0159 | [2] | PIN | |
| 8. | 1U-0612 | [2] | PIN | |
| 9. | 9M-5854 | [20] | STUD-TAPERLOCK (1-8-THD) | |
| 10. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 11. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 12. | 6V-8190 | [20] | NUT (1-8-THD) | |
| 13. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 14. | 8T-5361 | [20] | WASHER-HARD (28X49X5-MM THK) | |
| 15. | 8T-5412 M | [2] | BOLT (M12X1.75X140-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP44451243
138-2448: MOUNTING GP-WINCH
138-2448 MOUNTING GP-WINCH
S/N KSB1-UP; DTD1-UP; RCW1-UP
PART OF 371-0953, 371-0954 WINCH AR
AN ATTACHMENT
S/N KSB1-UP; DTD1-UP; RCW1-UP
PART OF 371-0953, 371-0954 WINCH AR
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 118-5863 | [1] | COUPLING | |
| 2. | 118-6595 | [1] | SHAFT | |
| 3. | 9M-5854 | [10] | STUD-TAPERLOCK (1-8-THD) | |
| 4. | 002-3455 | [2] | RING-RETAINING | |
| 5. | 118-8382 | [1] | PIN | |
| 6. | 3B-5320 | [2] | PIN-COTTER | |
| 7. | 299-3423 | [10] | NUT (1-8-THD) | |
| 8. | 8S-5654 | [2] | SEAL-O-RING | |
| 9. | 7X-1456 | [12] | PLUG | |
| 10. | 299-3426 | [10] | WASHER-HARD (28X49X6-MM THK) |
#SEBP44451244
224-4449: RIPPER AR
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 325-5723 CY | [1] | CYLINDER GP-RIPPER | |
| 4. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 5. | 235-8805 Y | [1] | RIPPER GP | |
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDES OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451245
378-3836: RIPPER AR
378-3836 RIPPER AR
S/N 1EH1-UP
FOR USE WITH CONTROL GP-RIPPER, CONTROL GP-RIPPER & WINCH
AN ATTACHMENT
S/N 1EH1-UP
FOR USE WITH CONTROL GP-RIPPER, CONTROL GP-RIPPER & WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-1356 Y | [1] | GUARD GP-TRANSMISSION | |
| 2. | 224-4454 Y | [1] | MOUNTING GP-RIPPER | |
| 3. | 235-8180 Y | [1] | LINES GP-RIPPER | |
| 4. | 325-5723 Y | [1] | CYLINDER GP-RIPPER | |
| 5. | 384-8437 Y | [1] | RIPPER GP | |
| 8M-3494 F | [1] | PLATE-SERIAL NUMBER (RIPPER) | ||
| (ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER) | ||||
| 4B-4158 F | [2] | SCREW-DRIVE (NO 4X0.25-IN) | ||
| 7X-7644 F | [2] | FILM-IDENTIFICATION (TIE-DOWN) | ||
| (ON RH & LH SIDES OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER) | ||||
| F | NOT SHOWN | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451246
235-8805: RIPPER GP
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0703 | [1] | BAR | |
| 2. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 3K-8510 | [1] | PIN | |
| 4. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 5. | 9J-8926 Y | [1] | TOOTH GP-RIPPER | |
| 6. | 9J-9598 | [2] | PIN | |
| 7. | 290-0862 | [1] | CARRIAGE AS | |
| 8. | 9W-0873 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | ||
| 9W-0876 | [2] | BUSHING | ||
| 9. | 189-0985 | [1] | FRAME & BEARING AS | |
| (EACH INCLUDES) | ||||
| 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | ||
| 9W-0099 | [4] | BUSHING | ||
| 10. | 1U-0159 | [2] | PIN | |
| 11. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 12. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 13. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 14. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 15. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 17. | 8T-4648 M | [8] | BOLT (M12X1.75X70-MM) | |
| 18. | 8T-7929 M | [2] | BOLT (M12X1.75X180-MM) | |
| 19. | 9N-4449 B | [2] | SPACER (68X121X1.5-MM THK) | |
| 20. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451247
384-8437: RIPPER GP
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2K-0703 | [1] | BAR | |
| 2. | 3B-8489 | [3] | FITTING-GREASE (1/8-27 PTF) | |
| 3. | 3K-8510 | [1] | PIN | |
| 4. | 4K-3004 | [2] | BEARING-TRUNNION SUPPLEMENTARY | |
| 6. | 9J-9598 | [2] | PIN | |
| 7. | 290-0862 | [1] | CARRIAGE AS | |
| 8. | 9W-0873 | [2] | LINK AS | |
| (EACH INCLUDES) | ||||
| 8A. | 9W-0876 | [2] | BUSHING | |
| 3B-8489 | [2] | FITTING-GREASE (1/8-27 PTF) | ||
| 9. | 189-0985 | [1] | FRAME & BEARING AS | |
| 9A. | 9W-0099 | [4] | BUSHING | |
| 3B-8489 | [4] | FITTING-GREASE (1/8-27 PTF) | ||
| 10. | 1U-0159 | [2] | PIN | |
| 11. | 5C-6565 | [2] | BOLT (1/2-13X1.125-IN) | |
| 12. | 6V-7687 M | [2] | LOCKNUT (M12X1.75-THD) | |
| 13. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 14. | 7X-2543 M | [2] | BOLT (M10X1.5X120-MM) | |
| 15. | 8T-4223 | [18] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4244 M | [8] | NUT (M12X1.75-THD) | |
| 17. | 8T-4648 M | [8] | BOLT (M12X1.75X70-MM) | |
| 18. | 8T-7929 M | [2] | BOLT (M12X1.75X180-MM) | |
| 19. | 9N-4449 B | [2] | SPACER (68X121X1.5-MM THK) | |
| 20. | 9N-4450 B | [4] | SPACER (68X120X5-MM THK) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
#SEBP44451248
174-9198: TOOTH GP-RIPPER
174-9198 TOOTH GP-RIPPER -STRAIGHT
S/N KSB1-1124; DTD1-1074; RCW1-1099
AN ATTACHMENT
S/N KSB1-1124; DTD1-1074; RCW1-1099
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8J-2189 Y | [1] | TOOTH GP-RIPPER | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP44451249
174-9199: TOOTH GP-RIPPER
174-9199 TOOTH GP-RIPPER -STRAIGHT
S/N KSB1-1124; DTD1-1074; RCW1-1099
AN ATTACHMENT
S/N KSB1-1124; DTD1-1074; RCW1-1099
AN ATTACHMENT
For full view, you need register
Parts for your D6T XL TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8J-2189 Y | [2] | TOOTH GP-RIPPER | ||
| Y | SEPARATE ILLUSTRATION | |||
