AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

233-1519 CYLINDER & LINES GP-LIFT -LH S/N WCB1-UP; R3W1-UP PART OF 222-8020 BULLDOZER AR-PWR ANGLE & TILT FOR USE WITH @@@@@233-1518@@@@@ AN ATTACHMENT D6R III


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
LINES GP-CYLINDER

TRACK-TYPE TRACTOR D6R III TRACK-TYPE TRACTOR HDC
 D6R Series III TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering HDC00001-UP (MACHINE) POWERED BY C9 Engine SEBP4447 D6R III HDC   (2005)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & LINES GP-LIFT
227-4037 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
233-1518 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
233-1519 CYLINDER & LINES GP-LIFT
CYLINDER GP-ANGLING
261-0077 CYLINDER GP-ANGLING
CYLINDER GP-BULLDOZER LIFT
227-0994 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
233-0478 CYLINDER GP-BULLDOZER LIFT
 

#SEBP44470680
 

233-1519: CYLINDER & LINES GP-LIFT

233-1519 CYLINDER & LINES GP-LIFT -LH
S/N WCB1-UP; R3W1-UP
PART OF 222-8020 BULLDOZER AR-PWR ANGLE & TILT
FOR USE WITH @@@@@233-1518@@@@@
AN ATTACHMENT
i02426643 SEBP4447
2331519 CYLINDER & LINES GP-LIFT Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-9121 [1] CLAMP  
2. 9U-9122 [1] CLAMP  
3. 129-3217 [1] GUARD AS  
4. 153-6251 [1] CONNECTOR AS  
  4K-1388 [1] SEAL-O-RING  
  6V-8400 [1] SEAL-O-RING  
  9X-8260 [1] CONNECTOR  
5. 233-0478 Y [1] CYLINDER GP-BULLDOZER LIFT  
6. 236-1689 [1] TUBE AS  
7. 236-2374 I [1] HOSE AS  
8. 236-2375 I [1] HOSE AS  
9. 148-8391 [1] ELBOW AS  
  2S-4078 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  8T-8987 [1] ELBOW  
10. 4J-0520 [3] SEAL-O-RING  
11. 5P-1075 [12] WASHER-HARD (10.2X22.5X3-MM THK)  
12. 7S-8920 [1] CLIP (SLOT)  
13. 7S-8921 [1] CLIP (TAB)  
14. 8C-3206 [2] FLANGE-HALF  
15. 8S-0023 [1] CLIP (SLOT)  
16. 8S-0024 [1] CLIP (TAB)  
17. 8T-4133 M [2] NUT (M10X1.5-THD)  
18. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
19. 8T-4196 M [6] BOLT (M10X1.5X35-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44470681
 

261-0077: CYLINDER GP-ANGLING

261-0077 CYLINDER GP-ANGLING
S/N R1W1-UP; R2W1-UP; R3W1-UP
101.6-MM (4-IN) BORE X 549.7-MM (21.7-IN) STROKE
PART OF 222-8010, 222-8015, 222-8020 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02431321 SEBP4447
2610077 CYLINDER GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
2. 6E-4977 [1] HEAD  
3. 261-0078 [1] ROD AS  
3A. 1J-6472 [2] RING-RETAINING  
3B. 237-4860 [1] BEARING-SELF-ALIGNING  
4. 261-0080 [1] PISTON AS  
4A. 122-9919 [1] PLUNGER  
4B. 8N-5083 [1] SPRING  
4C. 112-6142 [1] PLUNGER  
4D. 122-9918 [1] SPACER (8X14.07X28.67-MM THK)  
5. 261-0082 [1] CYLINDER AS  
5A. 9T-7045 [2] ELBOW  
5B. 1K-6985 [2] RING-RETAINING  
5C. 9M-1328 [1] BEARING-SELF-ALIGNING  
6. 167-2200 J [1] SEAL AS  
7. 362-3819 J [1] SEAL-U-CUP  
8. 175-7900 J [1] SEAL-O-RING  
9. 231-3538 J [1] SEAL-WIPER  
10. 2K-6830 J [1] RING-BACKUP  
11. 6J-2797 J [1] RING-WEAR  
12. 8T-4958 J [1] RING-WEAR  
13. 8T-5065 M [1] LOCKNUT (M30X3.5-THD)  
14. 495-8179 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  376-9012 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP44470682
 

227-0994: CYLINDER GP-BULLDOZER LIFT

227-0994 CYLINDER GP-BULLDOZER LIFT
S/N HDC1-UP; HKE1-UP; R1W1-UP; R2W1-UP
101.6-MM (4-IN) BORE X 1168-MM (46-IN) STROKE
PART OF 227-4036, 227-4037 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
i02412596 SEBP4447
2270994 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-0989 [1] CYLINDER AS  
  4J-6374 [2] BUSHING  
  9T-8958 [1] TRUNNION  
2. 1F-6762 [1] BOLT (1-1/2-12X4.5-IN)  
3. 3G-8742 [1] WASHER (39.3X63.5X6-MM THK)  
4. 1M-1571 J [1] RING-WEAR  
5. 9T-3885 [1] PISTON AS  
  8C-9160 J [1] SEAL AS  
6. 172-9981 [1] HEAD  
7. 227-0992 [1] ROD AS  
  1K-6985 [2] RING-RETAINING  
  9M-1328 [1] BEARING-SELF-ALIGNING  
8. 2K-6830 J [1] RING-BACKUP  
9. 175-7900 J [1] SEAL-O-RING  
10. 8T-0785 J [1] RING-WEAR  
11. 167-2201 [1] SEAL AS-BUFFER  
12. 167-2438 J [1] SEAL-U-CUP  
13. 225-3281 J [1] SEAL-WIPER  
   
    AVAILABLE REPAIR KIT(S):
  365-2932 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
  J   (KIT MARKED J SERVICES PARTS MARKED J)
 

#SEBP44470683
 

233-0478: CYLINDER GP-BULLDOZER LIFT

233-0478 CYLINDER GP-BULLDOZER LIFT
S/N WCB1-UP; R3W1-UP
101.6-MM (4-IN) BORE X 1104-MM (43.5-IN) STROKE
PART OF 233-1518, 233-1519 CYLINDER & LINES GP-LIFT
AN ATTACHMENT
i02426638 SEBP4447
2330478 CYLINDER GP-BULLDOZER LIFT Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-0785 J [1] RING-WEAR  
2. 3G-8742 [1] WASHER (39.3X63.5X6-MM THK)  
3. 9T-3885 [1] PISTON AS  
  8C-9160 J [1] SEAL AS  
4. 172-9981 [1] HEAD  
5. 233-0479 [1] CYLINDER AS  
5A. 4J-6374 [2] BUSHING  
5B. 9T-8958 [1] TRUNNION  
6. 233-0481 [1] ROD AS  
6A. 9M-1328 [1] BEARING-SELF-ALIGNING  
6B. 1K-6985 [2] RING-RETAINING  
7. 289-2937 J [1] SEAL AS-BUFFER  
8. 167-2438 J [1] SEAL-U-CUP  
9. 175-7900 J [1] SEAL-O-RING  
10. 1F-6762 [1] BOLT (1-1/2-12X4.5-IN)  
11. 1M-1571 J [1] RING-WEAR  
12. 225-3281 J [1] SEAL-WIPER  
13. 2K-6830 J [1] RING-BACKUP  
   
    AVAILABLE REPAIR KIT(S):
  365-2932 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES WEAR RINGS, BACKUP RING, SEAL AS-BUFFER , U-CUP SEAL, O-RING SEAL & WIPER SEAL)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP44470684
 

227-0842: CYLINDER GP-RIPPER

227-0842 CYLINDER GP-RIPPER -LIFT
S/N 1EH1-UP
127-MM (5-IN) BORE X 362-MM (14.3-IN) STROKE
PART OF 224-4449, 227-8797 RIPPER AR
AN ATTACHMENT
i02406096 SEBP4447
2270842 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 230-4873 [1] CYLINDER AS  
1A. 4K-3128 [2] BUSHING  
2. 2J-0564 [1] LOCKNUT (2-12-THD)  
3. 3G-1753 [1] PISTON  
4. 4J-3420 J [1] RING-WEAR  
5. 9X-7264 J [1] SEAL AS  
6. 3G-1757 [1] WASHER (50.95X82X12-MM THK)  
7. 2K-4096 J [1] RING-BACKUP  
8. 310-2189 [1] SEAL-O-RING  
9. 230-4872 [1] HEAD  
10. 9T-2714 [1] ROD AS  
10A. 2K-4507 [1] BUSHING  
11. 8T-5668 J [1] RING-WEAR  
12. 289-2937 J [1] SEAL AS-BUFFER  
13. 289-2948 J [1] SEAL-U-CUP  
14. 225-3281 J [1] SEAL-WIPER  
15. 6V-8237 [4] WASHER (26X44X4-MM THK)  
16. 173-9779 M [4] BOLT (M24X3X80-MM)  
17. 1P-4576 [4] FLANGE-HALF  
18. 8T-4186 M [8] BOLT (M10X1.5X40-MM)  
19. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  242-2542 J [1] KIT-SEAL (HYDRAULIC CYLINDER)  
    (INCLUDES RINGS & SEALS)
    (FOR USE WITH REHS1392)
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP44470685
 

325-5723: CYLINDER GP-RIPPER

325-5723 CYLINDER GP-RIPPER -LIFT
S/N 1EH1-UP
127-MM (5-IN) BORE X 362-MM (14.3-IN) STROKE
PART OF 224-4449, 227-8797 RIPPER AR
AN ATTACHMENT
i03626753 SEBP4447
3255723 CYLINDER GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-4507 [1] BUSHING  
3. 4J-3420 [1] RING-WEAR  
4. 4K-3128 [2] BUSHING  
5. 328-2293 [1] CYLINDER AS-HYDRAULIC  
6. 328-2294 [1] ROD AS  
7. 328-2295 [1] HEAD  
8. 328-2296 [1] PISTON  
9. 334-6074 [1] SPACER  
10. 167-2201 [1] SEAL AS-BUFFER  
11. 167-2312 [1] SEAL-U-CUP  
12. 1P-4576 [4] FLANGE-HALF  
13. 225-3281 J [1] SEAL-WIPER  
14. 2F-5325 [2] SETSCREW (3/8-16-THD)  
15. 2K-4096 J [1] RING-BACKUP  
16. 2L-0041 [13] BOLT (1/2-13X2.25-IN)  
17. 310-2189 J [1] SEAL-O-RING  
18. 4J-5267 [2] SEAL-O-RING  
19. 5H-4018 [2] COVER  
20. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
22. 8T-5668 J [1] RING-WEAR  
23. 9X-7264 J [1] SEAL AS  
   
    AVAILABLE REPAIR KIT(S):
  393-3604 J [1] KIT-HYD CYLINDER SEAL  
    (INCLUDES RINGS & SEALS)
  J   KIT MARKED J INCLUDE PARTS MARKED J
  M   METRIC PART
 

#SEBP44470686
 

227-8893: CYLINDER GP-TILT

227-8893 CYLINDER GP-TILT -BULLDOZER
S/N R1W1-UP; R2W1-UP; R3W1-UP
133.4-MM (5.25-IN) BORE X 143-MM (5.6-IN) STROKE
PART OF 222-8010, 222-8015, 222-8020 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02431309 SEBP4447
2278893 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-4049 [1] WASHER (51X73X12.7-MM THK)  
2. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
3. 291-3835 [1] HEAD  
4. 228-4024 [1] CYLINDER AS  
4A. 7J-1309 [1] BEARING  
  1S-3311 [1] RING-RETAINING  
  9T-7045 [1] ELBOW  
5. 228-4031 [1] ROD AS  
5A. 7J-1309 [1] BEARING  
  1S-3311 [1] RING-RETAINING  
6. 228-4035 [1] PISTON  
7. 289-2937 [1] SEAL AS-BUFFER  
8. 289-2948 [1] SEAL-U-CUP  
9. 175-7905 [1] SEAL-O-RING  
10. 225-3281 [1] SEAL-WIPER  
11. 2D-0714 [1] RING-WEAR  
12. 2J-7767 [1] RING-BACKUP  
13. 3J-9545 [1] LOCKNUT (2-12-THD)  
14. 8T-0763 [1] SEAL AS  
15. 8T-0785 [1] RING-WEAR  
16. 8T-0293 BM [2] BOLT (M12X1.75X20-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP44470687
 

222-8665: HYDRAULIC AR-3 VALVE

222-8665 HYDRAULIC AR-3 VALVE
S/N WCB1-UP; HDC1-UP; HKE1-UP
PART OF 222-1641, 222-1644, 222-1647 GENERAL AR
i02410950 SEBP4447
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  229-5421 Y [1] ADAPTER GP-MOTOR  
  222-1165 Y [1] LINES GP-LIFT CYLINDER  
  226-9985 Y [1] LINES GP-PILOT  
  222-1163 Y [1] LINES GP-PUMP  
  226-9994 Y [1] LINES GP-TILT CYLINDER  
  159-7156 Y [1] MOTOR GP-PISTON (STEERING)  
  222-1161 Y [1] PUMP & MOUNTING GP  
  222-1162 Y [1] TANK & MTG GP-HYDRAULIC  
  222-1191 Y [1] VALVE & MTG GP-COUNTERBALANCE  
  226-9987 Y [1] VALVE & MTG GP-IMPLEMENT CONT  
  226-9988 Y [1] VALVE & MTG GP-PILOT  
  222-1160 Y [1] VALVE GP-QUICK-DROP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP44470688
 

222-8006: LINES GP-ANGLE & TILT

222-8006 LINES GP-ANGLE & TILT
S/N R1W1-UP; R2W1-UP
PART OF 222-8010, 222-8015 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02431281 SEBP4447
2228006 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7K-1181 [12] STRAP-CABLE  
3. 216-7558 [2] CLIP  
4. 238-5030 [1] GUARD  
5. 238-5032 [2] GUARD AS  
6. 238-5038 [2] GUARD  
7. 238-5040 [1] GUARD  
8. 238-5044 [1] GUARD  
9. 238-6508 I [1] HOSE AS  
10. 238-6509 I [1] HOSE AS  
11. 238-7544 [1] GUARD  
12. 238-8954 [2] TUBE AS  
13. 239-9833 [2] PLATE  
14. 241-0624 [2] BODY-CLAMP  
15. 241-4169 [1] CLAMP GP-HYDRAULIC LINES  
16. 241-4596 [1] PLATE  
17. 241-4599 [1] PLATE  
18. 249-7881 [2] PLATE  
19. 260-1797 [2] CLAMP AS  
20. 280-7377 [2] GUARD AS  
21. 280-7378 [1] GUARD AS  
22. 280-7379 [1] GUARD AS  
23. 281-6578 [2] GUARD AS  
24. 281-6579 I [6] HOSE AS  
25. 281-6580 I [2] HOSE AS  
26. 281-6581 I [2] HOSE AS  
27. 281-6582 I [1] HOSE AS  
28. 281-6583 I [1] HOSE AS  
29. 281-6588 I [1] HOSE AS  
30. 281-6589 I [1] HOSE AS  
31. 281-7766 I [2] HOSE AS  
32. 281-7767 I [2] HOSE AS  
33. 148-8340 [5] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
34. 148-8346 [1] ELBOW AS  
  8T-1686 [1] ADAPTER-ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
35. 148-8380 [6] ELBOW AS  
    (EACH INCLUDES)
  6V-8988 [1] ELBOW  
  6V-8398 [2] SEAL-O-RING  
36. 148-8457 [6] UNION AS (STRAIGHT)  
    (EACH INCLUDES)
  6V-8995 [1] UNION (STRAIGHT)  
  6V-8398 [2] SEAL-O-RING  
37. 3G-8047 [2] GROMMET  
38. 3G-8054 [2] CLIP (TAB)  
39. 3G-8057 [2] CLIP (SLOT)  
40. 6V-8398 [4] SEAL-O-RING  
41. 6V-9169 [12] NUT (13/16-16-THD)  
42. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
43. 7X-7729 [6] WASHER (11X25X3-MM THK)  
44. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
45. 8T-4133 M [2] NUT (M10X1.5-THD)  
46. 8T-4139 M [60] BOLT (M12X1.75X30-MM)  
47. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
48. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
49. 8T-4195 M [12] BOLT (M10X1.5X30-MM)  
50. 8T-4223 [68] WASHER-HARD (13.5X25.5X3-MM THK)  
51. 8T-4244 M [4] NUT (M12X1.75-THD)  
52. 9R-1004 [4] CLIP (TAB)  
53. 9R-1005 [4] CLIP (SLOT)  
54. 160-2250 G SLEEVE-ABRASION (30-IN EACH)  
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP44470689
 

225-3728: LINES GP-ANGLE & TILT

225-3728 LINES GP-ANGLE & TILT
S/N R3W1-UP
PART OF 222-8020 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02431406 SEBP4447
2253728 LINES GP-ANGLE & TILT Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [2] FITTING-GREASE (1/8-27 PTF)  
2. 7K-1181 [12] STRAP-CABLE  
3. 216-7558 [2] CLIP  
4. 238-5030 [1] GUARD  
5. 238-5032 [2] GUARD AS  
6. 238-5038 [2] GUARD  
7. 238-5040 [1] GUARD  
8. 238-5044 [1] GUARD  
9. 238-5046 [1] PLATE  
10. 238-5049 [1] PLATE  
11. 238-6508 I [1] HOSE AS  
12. 238-6509 I [1] HOSE AS  
13. 238-7544 [1] GUARD  
14. 238-8954 [2] TUBE AS  
15. 239-9833 [2] PLATE  
16. 241-0624 [2] BODY-CLAMP  
17. 241-4169 [1] CLAMP GP-HYDRAULIC LINES  
18. 249-7881 [2] PLATE  
19. 260-1797 [2] CLAMP AS  
20. 280-7377 [2] GUARD AS  
21. 280-7378 [1] GUARD AS  
22. 280-7379 [1] GUARD AS  
23. 281-6578 [2] GUARD AS  
24. 281-6579 I [6] HOSE AS  
25. 281-6580 I [2] HOSE AS  
26. 281-6581 I [2] HOSE AS  
27. 281-6582 I [1] HOSE AS  
28. 281-6583 I [1] HOSE AS  
29. 281-6584 I [2] HOSE AS  
30. 281-6585 I [2] HOSE AS  
31. 281-6586 I [1] HOSE AS  
32. 281-6587 I [1] HOSE AS  
33. 148-8340 [5] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8639 [1] CONNECTOR  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
34. 148-8346 [1] ELBOW AS  
  8T-1686 [1] ADAPTER-ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
35. 148-8380 [6] ELBOW AS  
    (EACH INCLUDES)
  6V-8988 [1] ELBOW  
  6V-8398 [2] SEAL-O-RING  
36. 148-8457 [6] UNION AS (STRAIGHT)  
    (EACH INCLUDES)
  6V-8995 [1] UNION (STRAIGHT)  
  6V-8398 [2] SEAL-O-RING  
37. 3G-8047 [2] GROMMET  
38. 3G-8054 [2] CLIP (TAB)  
39. 3G-8057 [2] CLIP (SLOT)  
40. 6V-8398 [4] SEAL-O-RING  
41. 6V-9169 [12] NUT (13/16-16-THD)  
42. 7X-0818 M [2] BOLT (M8X1.25X45-MM)  
43. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
44. 8T-4133 M [2] NUT (M10X1.5-THD)  
45. 8T-4139 M [62] BOLT (M12X1.75X30-MM)  
46. 8T-4183 M [4] BOLT (M12X1.75X40-MM)  
47. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
48. 8T-4195 M [12] BOLT (M10X1.5X30-MM)  
49. 8T-4223 [70] WASHER-HARD (13.5X25.5X3-MM THK)  
50. 8T-4244 M [4] NUT (M12X1.75-THD)  
51. 9R-1004 [4] CLIP (TAB)  
52. 9R-1005 [4] CLIP (SLOT)  
53. 160-2250 G SLEEVE-ABRASION (30-IN EACH)  
54. 7X-7729 [6] WASHER (11X25X3-MM THK)  
  G   ORDER BY THE INCH
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}

Caterpillar Parts SIS Catalog D6R III :

CYLINDER & LINES GP-LIFT
233-1518 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
227-4037 CYLINDER & LINES GP-LIFT
CYLINDER & LINES GP-LIFT
227-4036 CYLINDER & LINES GP-LIFT
COVER GP-MOTOR
512-5159 COVER GP-MOTOR
COOLER GP-HYDRAULIC OIL
169-3806 COOLER GP-HYDRAULIC OIL
COOLER AR-HYDRAULIC OIL
281-2780 COOLER AR-HYDRAULIC OIL
COOLER AR-HYDRAULIC OIL
280-4168 COOLER AR-HYDRAULIC OIL
241-3454 CONTROL AR-HYDRAULIC IMPLEMENT
CYLINDER GP-ANGLING
261-0077 CYLINDER GP-ANGLING
CYLINDER GP-BULLDOZER LIFT
227-0994 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-BULLDOZER LIFT
233-0478 CYLINDER GP-BULLDOZER LIFT
CYLINDER GP-RIPPER
227-0842 CYLINDER GP-RIPPER
CYLINDER GP-RIPPER
325-5723 CYLINDER GP-RIPPER
CYLINDER GP-TILT
227-8893 CYLINDER GP-TILT
222-8665 HYDRAULIC AR-3 VALVE
LINES GP-ANGLE & TILT
222-8006 LINES GP-ANGLE & TILT

Truck sale:

Caterpillar D6RIIILGP, Construction
80,000 
Caterpillar D6RIIILGP, Construction
- Dozers
FOLEY, INC.
Caterpillar D6RIIIXL, Construction
 
Caterpillar D6RIIIXL, Construction
- Dozers
MANTRAC GHANA LIMITED
Ghana
Caterpillar D6RIII, Construction
78,100 
Caterpillar D6RIII, Construction
- Dozers
PT CATERPILLAR FINANCE INDONESIA
Indonesia
Caterpillar D6RIIILGP, Construction
 
Caterpillar D6RIIILGP, Construction
- Dozers
WILLIAM ADAMS PTY. LTD.
Australia
Caterpillar D6RIIIXLVP, Construction
121,700 
Caterpillar D6RIIIXLVP, Construction
- Dozers
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.