AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

223-3290 EDGE GP-BIT & CUTTING S/N WCB1-UP; HDC1-UP; R2W1-UP; R3W1-UP PART OF 223-2350, 223-3280 BLADE & EDGE GP-ANGLING, 296-5340, 296-5341 BLADE & EDGE GP-SEMI-UNIVERSAL AN ATTACHMENT D6R III


WORK TOOLS
GROUND ENGAGING TOOLS (G.E.T.)
ELECTRICAL AND STARTING SYSTEM
RECEIVER GP
WORK TOOLS
RIPPER GP

TRACK-TYPE TRACTOR D6R III TRACK-TYPE TRACTOR HDC
 D6R Series III TRACK-TYPE TRACTOR XL PAT, XW PAT, LGP PAT Differential Steering HDC00001-UP (MACHINE) POWERED BY C9 Engine SEBP4447 D6R III HDC   (2005)

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)
BLADE & EDGE GP-SEMI-UNIVERSAL
296-5341 BLADE & EDGE GP-SEMI-UNIVERSAL
EDGE GP-BIT & CUTTING
219-4270 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
223-3290 EDGE GP-BIT & CUTTING
174-9198 TOOTH GP-RIPPER
174-9199 TOOTH GP-RIPPER
3A-7880 TOOTH GP-RIPPER
 

#SEBP44470940
 

223-3290: EDGE GP-BIT & CUTTING

223-3290 EDGE GP-BIT & CUTTING
S/N WCB1-UP; HDC1-UP; R2W1-UP; R3W1-UP
PART OF 223-2350, 223-3280 BLADE & EDGE GP-ANGLING, 296-5340, 296-5341 BLADE & EDGE GP-SEMI-UNIVERSAL
AN ATTACHMENT
i02436390 SEBP4447
2233290 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-8874 [1] BIT-END (RH)  
2. 9W-8875 [1] BIT-END (LH)  
3. 229-6958 [2] EDGE-CUTTING  
4. 2J-3506 [34] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [34] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP44470941
 

245-4139: MOUNTING GP-MAST

245-4139 MOUNTING GP-MAST -GRADE CONTROL
S/N WCB1-UP; HDC1-UP; HKE1-UP
PART OF 278-6375, 278-6376 MACHINE AR
AN ATTACHMENT
i02413380 SEBP4447
2454139 MOUNTING GP-MAST Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 279-9894 [1] PLATE AS  
2. 279-9900 [2] BRACKET AS  
3. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
4. 8T-4184 M [12] BOLT (M12X1.75X45-MM)  
5. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP44470942
 

292-0302: MOUNTING GP-MAST

292-0302 MOUNTING GP-MAST -LASER RECEIVER
S/N WCB1-UP; HDC1-UP; HKE1-UP
TTT ELECTRIC MAST
PART OF 292-0293, 292-0312 GRADE CONTROL AR-LASER
i02622638 SEBP4447
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4648 M [4] BOLT (M12X1.75X70-MM)  
  237-7552 [3] FILM-WARNING (LASER TRANSMITTER)  
  252-8744 [1] FILM-WARNING (BLADE, DO NOT CLIMB, READ OMM)  
  8T-4244 M [4] NUT (M12X1.75-THD)  
  8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP44470943
 

292-0303: MOUNTING GP-MAST

292-0303 MOUNTING GP-MAST -SATELLITE RECEIVER
S/N WCB1-UP; HDC1-UP; HKE1-UP
PART OF 290-5571, 292-0280 GRADE CONTROL AR-SATELLITE, 292-0290 MAST GP
i02618908 SEBP4447
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4648 M [4] BOLT (M12X1.75X70-MM)  
  252-8744 [1] FILM-WARNING (BLADE, DO NOT CLIMB, READ OMM)  
  8T-4244 M [4] NUT (M12X1.75-THD)  
  8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP44470944
 

224-4454: MOUNTING GP-RIPPER

224-4454 MOUNTING GP-RIPPER
S/N 1EH1-UP
PART OF 224-4449, 227-8797 RIPPER AR
AN ATTACHMENT
i02406093 SEBP4447
2244454 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0300 [1] BRACKET AS  
  3G-9995 [2] PLATE  
2. 1U-0301 [2] BRACKET AS  
    (EACH INCLUDES)
  2K-6279 [1] BOSS  
3. 7T-1975 [1] BRACKET AS  
  3G-9995 [2] PLATE  
4. 9N-4449 B [12] SPACER (68X121X1.5-MM THK)  
5. 9N-4450 B [4] SPACER (68X120X5-MM THK)  
6. 9W-0609 [4] SPACER (53X100X35-MM THK)  
7. 1U-0159 [2] PIN  
8. 1U-0612 [2] PIN  
9. 9M-5854 [20] STUD-TAPERLOCK (1-8-THD)  
10. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
11. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
12. 6V-8190 [20] NUT (1-8-THD)  
13. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
14. 8T-5361 [20] WASHER-HARD (28X49X5-MM THK)  
15. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP44470945
 

224-4449: RIPPER AR

224-4449 RIPPER AR
S/N 1EH1-5291
AN ATTACHMENT
i02406056 SEBP4447
2244449 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 224-4454 Y [1] MOUNTING GP-RIPPER  
3. 227-0842 Y [1] CYLINDER GP-RIPPER  
4. 235-8180 Y [1] LINES GP-RIPPER  
5. 235-8805 Y [1] RIPPER GP  
   
  7X-7644 F [2] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER)
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    (ON CARRIAGE AS ON RH SIDE OF RH TOWER)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP44470946
 

224-4449: RIPPER AR

224-4449 RIPPER AR
S/N 1EH5292-UP
AN ATTACHMENT
i03626750 SEBP4447
2244449 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 224-4454 Y [1] MOUNTING GP-RIPPER  
3. 325-5723 CY [1] CYLINDER GP-RIPPER  
4. 235-8180 Y [1] LINES GP-RIPPER  
5. 235-8805 Y [1] RIPPER GP  
   
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    (ON CARRIAGE ASSEMBLY ON RH SIDE OF RH TOWER)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  7X-7644 F [2] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON RH & LH SIDES OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER)
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP44470947
 

227-8797: RIPPER AR

227-8797 RIPPER AR
S/N 1EH1-UP
Type 1
REPLACED BY @@@@@224-4449@@@@@
FOR USE WITH @@@@@226-9136@@@@@
CANNOT BE USED WITH 990-MM (39-IN) TRACK SHOE
AN ATTACHMENT
i02422267 SEBP4447
2278797 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 224-4454 Y [1] MOUNTING GP-RIPPER  
3. 227-0842 Y [1] CYLINDER GP-RIPPER  
4. 235-8180 Y [1] LINES GP-RIPPER  
5. 235-8805 Y [1] RIPPER GP  
   
  7X-7644 F [2] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN REAR IDLER & REAR ROLLER)
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    (ON CARRIAGE AS ON RH SIDE OF RH TOWER)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP44470948
 

227-8797: RIPPER AR

227-8797 RIPPER AR
S/N 1EH1-UP
Type 2
REPLACED BY @@@@@224-4449@@@@@
FOR USE WITH @@@@@226-9136@@@@@
CANNOT BE USED WITH 990-MM (39-IN) TRACK SHOE
AN ATTACHMENT
i04089189 SEBP4447
2278797 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 224-4454 Y [1] MOUNTING GP-RIPPER  
3. 235-8180 Y [1] LINES GP-RIPPER  
4. 235-8805 Y [1] RIPPER GP  
5. 325-5723 CY [1] CYLINDER GP-RIPPER  
   
  7X-7644 F [2] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN REAR IDLER & REAR ROLLER)
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    (ON CARRIAGE AS ON RH SIDE OF RH TOWER)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP44470949
 

235-8805: RIPPER GP

235-8805 RIPPER GP
S/N 1EH1-UP
PART OF 224-4449, 227-8797 RIPPER AR
AN ATTACHMENT
i02406099 SEBP4447
2358805 RIPPER GP Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2K-0703 [1] BAR  
2. 3B-8489 [3] FITTING-GREASE (1/8-27 PTF)  
3. 3K-8510 [1] PIN  
4. 4K-3004 [2] BEARING-TRUNNION SUPPLEMENTARY  
5. 9J-8926 Y [1] TOOTH GP-RIPPER  
6. 9J-9598 [2] PIN  
7. 290-0862 [1] CARRIAGE AS  
8. 9W-0873 [2] LINK AS  
    (EACH INCLUDES)
  3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
  9W-0876 [2] BUSHING  
9. 189-0985 [1] FRAME & BEARING AS  
    (EACH INCLUDES)
  3B-8489 [4] FITTING-GREASE (1/8-27 PTF)  
  9W-0099 [4] BUSHING  
10. 1U-0159 [2] PIN  
11. 5C-6565 [2] BOLT (1/2-13X1.125-IN)  
12. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
13. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
14. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
15. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
16. 8T-4244 M [8] NUT (M12X1.75-THD)  
17. 8T-4648 M [8] BOLT (M12X1.75X70-MM)  
18. 8T-7929 M [2] BOLT (M12X1.75X180-MM)  
19. 9N-4449 B [2] SPACER (68X121X1.5-MM THK)  
20. 9N-4450 B [4] SPACER (68X120X5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog D6R III :

EDGE GP-BIT & CUTTING
219-4270 EDGE GP-BIT & CUTTING
BLADE GP-ANGLING
222-8021 BLADE GP-ANGLING
BLADE GP-ANGLING
222-8016 BLADE GP-ANGLING
BLADE GP-ANGLING
214-2292 BLADE GP-ANGLING
BLADE & EDGE GP-SEMI-UNIVERSAL
296-5341 BLADE & EDGE GP-SEMI-UNIVERSAL
BLADE & EDGE GP-SEMI-UNIVERSAL
296-5340 BLADE & EDGE GP-SEMI-UNIVERSAL
BLADE & EDGE GP-SEMI-UNIVERSAL
296-5339 BLADE & EDGE GP-SEMI-UNIVERSAL
BLADE & EDGE GP-ANGLING
223-3280 BLADE & EDGE GP-ANGLING
MOUNTING GP-MAST
245-4139 MOUNTING GP-MAST
292-0302 MOUNTING GP-MAST
292-0303 MOUNTING GP-MAST
MOUNTING GP-RIPPER
224-4454 MOUNTING GP-RIPPER
RIPPER AR
224-4449 RIPPER AR
RIPPER AR
224-4449 RIPPER AR
RIPPER AR
227-8797 RIPPER AR
RIPPER AR
227-8797 RIPPER AR

Truck sale:

Caterpillar D6RIIILGP, Construction
80,000 
Caterpillar D6RIIILGP, Construction
- Dozers
FOLEY, INC.
Caterpillar D6RIIIXL, Construction
 
Caterpillar D6RIIIXL, Construction
- Dozers
MANTRAC GHANA LIMITED
Ghana
Caterpillar D6RIII, Construction
78,100 
Caterpillar D6RIII, Construction
- Dozers
PT CATERPILLAR FINANCE INDONESIA
Indonesia
Caterpillar D6RIIILGP, Construction
 
Caterpillar D6RIIILGP, Construction
- Dozers
WILLIAM ADAMS PTY. LTD.
Australia
Caterpillar D6RIIIXLVP, Construction
121,700 
Caterpillar D6RIIIXLVP, Construction
- Dozers
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.