AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

168-9483 LINES GP-TRAVEL MOTOR S/N PAD1-UP PART OF 268-5082 HYDRAULIC AR 311C EXCAVATOR


HYDRAULIC SYSTEM
LINES GP-TRAVEL MOTOR
MOTOR GP
MOUNTING GP
PUMP GP

EXCAVATOR 311C EXCAVATOR PAD
 311C U Excavator PAD00001-UP (MACHINE) POWERED BY 3064 Engine SEBP4452 311C PAD   (2004)

HYDRAULIC SYSTEM

LINES GP-TRAVEL MOTOR
LINES GP-TRAVEL MOTOR
168-9483 LINES GP-TRAVEL MOTOR
 

#SEBP44520280
 

168-9483: LINES GP-TRAVEL MOTOR

168-9483 LINES GP-TRAVEL MOTOR
S/N PAD1-UP
PART OF 268-5082 HYDRAULIC AR
i01502701 SEBP4452
1689483 LINES GP-TRAVEL MOTOR Parts scheme 1689483 LINES GP-TRAVEL MOTOR Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 184-9323 I [3] HOSE AS  
2. 268-5145 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  194-9041 [1] ELBOW  
3. 148-8339 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-8716 [1] CONNECTOR (STRAIGHT)  
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
4. 286-6499 [2] CONNECTOR AS  
    (EACH INCLUDES)
  6V-9746 [1] SEAL-O-RING  
  7M-8485 [1] SEAL-O-RING  
  184-9330 [1] CONNECTOR  
5. 106-8715 [2] ELBOW AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  8C-8400 [1] ELBOW  
6. 148-8347 [1] ELBOW AS  
  3D-2824 [1] SEAL-O-RING  
  6V-9007 [1] ELBOW  
  6V-9746 [1] SEAL-O-RING  
7. 200-3260 [1] ROD AS  
  200-3261 [1] ROD  
  225-4539 [1] WASHER-SPECIAL (17X30X6-MM THK)(17X30X6-MM THK)  
8. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
9. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
10. 1U-8846 B SEALANT-GASKET  
11. 162-4696 Y [1] SWIVEL GP  
12. 286-6498 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-9746 [1] SEAL-O-RING  
  110-5897 [1] CONNECTOR  
13. 7I-8192 E GUARD (15-CM)  
14. 148-8327 [6] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
15. 148-8336 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  6V-8636 [1] CONNECTOR  
16. 5I-4366 [2] GROMMET  
17. 153-6249 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3J-1907 [1] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  8T-8887 [1] CONNECTOR  
18. 111-0988 I [2] HOSE AS  
19. 148-8340 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
  6V-8639 [1] CONNECTOR  
20. 199-1965 I [2] HOSE AS  
21. 199-1966 I [4] HOSE AS  
22. 5I-4365 [2] GROMMET  
23. 148-8436 [1] TEE AS  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8775 [1] TEE-FACE SEAL  
24. 7I-1151 [2] CLIP  
25. 7I-1152 [2] CLIP AS  
26. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
27. 7K-1181 [6] STRAP-CABLE  
28. 195-0061 I [1] HOSE AS  
29. 148-8371 [2] ELBOW AS  
    (EACH INCLUDES)
  6V-8397 [1] SEAL-O-RING  
  8C-8988 [1] ELBOW  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44520281
 

170-9896: MOTOR GP-SWING

170-9896 MOTOR GP-SWING
S/N PAD1-UP
PART OF 169-5548 DRIVE GP-SWING
i01506262 SEBP4452
1709896 MOTOR GP-SWING Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 099-0320 [1] BUSHING  
2. 099-0321 J [1] SEAL-LIP TYPE  
3. 099-0322 [1] BEARING-ROLLER  
4. 7I-0057 [1] SPRING  
5. 099-4749 [1] PLATE-CAM  
6. 7I-0058 [1] PLATE-RETAINER  
7. 200-3335 [1] PISTON AS  
8. 099-6530 [3] PLATE-FRICTION  
9. 099-6531 [3] PLATE-SEPARATOR  
10. 099-6532 J [1] SEAL-O-RING  
11. 099-6535 [1] PISTON-BRAKE  
12. 6F-4718 J [2] SEAL-O-RING  
13. 099-0328 [16] SPRING  
14. 099-0329 [2] PIN  
15. 099-0330 [4] SPRING  
16. 099-0331 [4] RING  
17. 099-0332 [4] BUSHING  
18. 099-0333 [1] PLATE-VALVE  
19. 099-0334 [1] BEARING AS-NEEDLE  
20. 099-0335 [1] RING-RETAINING  
21. 123-2143 [1] BARREL AS  
22. 200-3374 [1] HOUSING  
23. [1] PLATE-IDENTIFICATION  
24. 7I-0060 [2] PLUG  
25. 095-1784 J [2] RING-BACKUP  
26. 095-1585 J [2] SEAL-O-RING  
27. 095-1580 J [2] SEAL-O-RING  
28. 7I-0061 [2] VALVE (CROSSOVER RELIEF)  
29. 7I-0062 [2] SPRING  
30. 7I-0063 [2] SLEEVE AS  
31. 194-8400 [1] HEAD  
32. 095-1594 J [4] SEAL-O-RING  
33. 3J-1907 J [3] SEAL-O-RING  
34. 9S-4191 [3] PLUG (9/16-18-THD)  
35. 229-0992 [2] VALVE GP-RELIEF  
    (EACH INCLUDES)
  095-1594 [1] SEAL-O-RING  
36. 8T-0347 M [4] BOLT-SOCKET HEAD (M14X1.5X45-MM)  
37. 096-5933 [2] VALVE-CHECK (MAKEUP)  
38. 095-1789 J [2] RING  
39. 096-5934 [2] SPRING  
40. 096-5932 [2] PLUG  
41. 200-3375 [1] VALVE GP-BRAKE  
42. 9X-2537 M [3] BOLT-SOCKET HEAD (M6X1X70-MM)  
43. 6V-5586 [1] SEAL-O-RING  
44. 6V-8397 [2] SEAL-O-RING  
   
    AVAILABLE REPAIR KIT(S):
  123-2145 J [1] KIT-SEAL (SWING MOTOR)  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
 

#SEBP44520282
 

199-6413: MOTOR GP-TRAVEL

199-6413 MOTOR GP-TRAVEL
S/N PAD1-UP
PART OF 168-5286 DRIVE GP-FINAL
i01510394 SEBP4452
1996413 MOTOR GP-TRAVEL Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 165-5803 [1] SHAFT  
2. 165-5804 [1] BEARING-ROLLER  
3. 165-5806 [2] PISTON  
4. 176-8571 [1] BODY  
5. 165-2794 [1] RETAINER-BALL  
6. 176-8580 [1] PLATE  
7. 165-5809 [9] PISTON AS  
8. 165-2793 [1] RETAINER  
9. 165-5811 [1] BARREL AS  
10. 165-5814 [4] PLATE-SEPARATOR  
11. 176-8573 [4] PLATE-FRICTION  
12. 165-5816 [1] GUIDE-PISTON  
13. 165-5817 [1] PISTON-BRAKE  
14. 165-3852 [1] BEARING AS-NEEDLE  
15. 1H-8278 [1] SEAL-O-RING  
16. 095-1585 [1] SEAL-O-RING  
17. 087-4742 [1] VALVE  
18. 096-1519 [1] SEAT  
19. 095-7380 [1] SPRING  
20. 095-7382 [1] RETAINER  
21. 094-1875 [1] DOWEL  
22. 165-5818 [8] SPRING  
23. 165-5819 [1] SEAL-O-RING  
24. 165-5820 [1] RING-BACKUP  
25. 165-5821 [1] SEAL-O-RING  
26. 165-5822 [1] RING-BACKUP  
27. 165-5823 [1] SEAL-O-RING  
28. 165-5824 [1] RING-BACKUP  
29. 165-2799 [9] SPRING  
30. 176-8131 [1] SPACER-SPECIAL  
31. 165-5826 [1] SEAL-LIP TYPE  
32. 8T-4240 [1] RING-RETAINING  
33. 165-5828 [2] KEY  
34. 7Y-4224 [1] ORIFICE  
35. 085-9769 [4] PIN  
36. 165-5831 [2] SPRING  
37. 094-1882 [7] PLUG  
38. 8T-4944 M [9] BOLT-SOCKET HEAD (M16X2X40-MM)  
39. 199-6403 Y [1] VALVE GP-TRAVEL COUNTERBALANCE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44520283
 

179-7455: MOUNTING GP-VALVE

179-7455 MOUNTING GP-VALVE
S/N PAD1-UP
PART OF 268-5082 HYDRAULIC AR
i01472346 SEBP4452
1797455 MOUNTING GP-VALVE Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 194-0346 [1] SUPPORT AS  
  8T-3597 M [2] NUT-WELD (M12X1.75-THD)  
2. 265-2513 [1] SUPPORT AS  
3. 176-4703 [8] WASHER (17X30X8-MM THK)  
4. 8T-4779 M [4] BOLT (M16X2X35-MM)  
5. 8T-4193 M [4] BOLT (M16X2X50-MM)  
  M   METRIC PART
 

#SEBP44520284
 

244-5214: PUMP & MTG GP-AUXILIARY

244-5214 PUMP & MTG GP-AUXILIARY -MEDIUM PRESSURE
S/N PAD1-UP
PART OF 244-5282, 244-5289 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02211343 SEBP4452
2445214 PUMP & MTG GP-AUXILIARY Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-2078 [1] PUMP GP-GEAR  
2. 170-6738 [1] SPACER  
3. 095-1711 [2] SEAL-O-RING  
4. 222-2062 [1] COUPLING  
5. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
  M   METRIC PART
 

#SEBP44520285
 

162-6312: PUMP & MTG GP-MAIN HYDRAULIC

162-6312 PUMP & MTG GP-MAIN HYDRAULIC
S/N PAD1-UP
PART OF 268-5082 HYDRAULIC AR
i01502688 SEBP4452
1626312 PUMP & MTG GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-8134 Y [1] PUMP GP-PISTON (MAIN HYDRAULIC)  
2. 8T-4136 M [12] BOLT (M10X1.5X25-MM)  
3. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
4. 190-5846 Y [1] COUPLING GP-PUMP  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44520286
 

195-0019: PUMP & MTG GP-MAIN HYDRAULIC

195-0019 PUMP & MTG GP-MAIN HYDRAULIC
S/N PAD1-UP
PART OF 151-1454, 199-9298, 199-9300 BLADE AR
AN ATTACHMENT
i01777927 SEBP4452
1950019 PUMP & MTG GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 185-1726 Y [1] PUMP GP-MAIN HYDRAULIC  
  Y   SEPARATE ILLUSTRATION
 

#SEBP44520287
 

185-1726: PUMP GP-MAIN HYDRAULIC

185-1726 PUMP GP-MAIN HYDRAULIC
S/N PAD1-UP
PART OF 195-0019 PUMP & MTG GP-MAIN HYDRAULIC
Type 1
AN ATTACHMENT
i02296058 SEBP4452
1851726 PUMP GP-MAIN HYDRAULIC Parts scheme 1851726 PUMP GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-8802 [1] SHAFT-INPUT  
2. 199-7460 [1] BLOCK-PORT  
3. 173-1203 [1] PUMP GP-GEAR  
4. 9S-4191 [3] PLUG (9/16-18-THD)  
5. 3J-1907 [3] SEAL-O-RING  
6. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
7. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
8. 7X-2553 M [6] BOLT (M16X2X40-MM)  
9. 165-2801 [2] BEARING-ROLLER  
10. 165-3851 [4] BEARING-CRADLE  
11. 165-3847 [18] PISTON AS  
12. 165-2799 [12] SPRING  
13. 6V-7991 [1] SEAL-O-RING  
14. 165-3839 [1] BARREL AS  
15. 165-3852 [2] BEARING AS-NEEDLE  
16. 095-1663 [1] SEAL-O-RING  
17. 222-2063 C [1] SHAFT-DRIVE  
18. 207-2985 [2] ORIFICE  
19. 176-0581 [1] CASE  
20. 165-2793 [2] RETAINER  
21. 165-2794 [2] RETAINER-BALL  
22. 6V-8144 [2] RING-RETAINING  
23. 1J-6472 [2] RING-RETAINING  
24. 165-2802 [1] SEAL-LIP TYPE  
25. 8T-9599 [1] RING-RETAINING  
26. 1H-7339 [1] SEAL-O-RING  
27. 2H-9247 [2] SEAL-O-RING  
28. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 165-3849 [2] CAM  
31. 176-8131 [2] SPACER-SPECIAL  
32. 165-2805 [2] BLOCK  
33. 165-3838 [1] BARREL AS  
34. 176-8132 [2] BEARING  
35. 8C-3338 [4] DOWEL  
36. 165-3853 [1] COVER  
37. 199-0518 [12] SEAL-O-RING  
38. 176-1026 [1] PLATE  
39. 190-4896 [2] PLUG  
40. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
41. 8T-4140 M [1] BOLT (M16X2X60-MM)  
42. 094-1882 [15] PLUG  
43. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
44. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
45. 174-7212 Y [2] ACTUATOR GP-PUMP  
46. 094-1875 [10] DOWEL  
47. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)  
48. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
49. 222-2062 C [1] COUPLING  
50. 8T-3338 [2] SEAL-O-RING  
51. 170-6738 [1] SPACER  
52. 218-0557 [1] PUMP GP-GEAR  
  353-5511 [1] KIT-SEAL  
  3G-5083 [1] SEAL-LIP TYPE  
  9T-0836 [1] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44520288
 

185-1726: PUMP GP-MAIN HYDRAULIC

185-1726 PUMP GP-MAIN HYDRAULIC
S/N PAD1-UP
PART OF 195-0019 PUMP & MTG GP-MAIN HYDRAULIC
Type 2
AN ATTACHMENT
i02903778 SEBP4452
1851726 PUMP GP-MAIN HYDRAULIC Parts scheme 1851726 PUMP GP-MAIN HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
2. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)  
3. 379-3002 [2] PISTON AS  
4. 298-5732 [2] RETAINER-BALL  
5. 165-2801 [2] BEARING-ROLLER  
6. 353-5837 [1] SEAL-LIP TYPE  
7. 165-2805 [2] BLOCK  
8. 165-3838 [1] BARREL AS  
9. 165-3839 [1] BARREL AS  
10. 353-5829 [2] GUIDE-BALL  
13. 267-8084 [2] BEARING-NEEDLE  
14. 165-3853 [1] COVER  
15. 170-6738 [1] SPACER  
16. 173-1203 J [1] PUMP GP-GEAR (BLADE)  
17. 174-7212 Y [2] ACTUATOR GP-PUMP  
19. 176-8131 [2] SPACER-SPECIAL  
20. 176-8132 [2] BEARING  
21. 267-1629 [1] SHAFT-DRIVEN  
23. 190-4896 C [2] PLUG  
24. 199-0518 C [2] SEAL-O-RING  
25. 207-2985 [2] ORIFICE  
26. 218-0557 N [1] PUMP GP-GEAR (PILOT)  
27. 222-2062 [1] COUPLING  
28. 267-1628 [1] SHAFT-DRIVE  
29. 273-8315 C [2] SEAL-O-RING  
30. 282-9192 C [1] CASE-FLANGE  
31. 311-7409 C [1] BLOCK-PORT  
32. 094-1875 [6] DOWEL  
33. 094-1882 C [15] PLUG  
34. 095-1663 [1] SEAL-O-RING  
36. 165-2799 [12] SPRING  
37. 189-9763 C [4] SEAL-O-RING  
38. 1H-7339 [1] SEAL-O-RING  
39. 1J-6472 [2] RING-RETAINING  
40. 273-8320 C [1] SEAL-O-RING  
41. 3J-1907 [2] SEAL-O-RING  
42. 6V-8144 [2] RING-RETAINING  
43. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
44. 7X-2553 CM [5] BOLT (M16X2X40-MM)  
45. 7X-2556 CM [1] BOLT (M16X2X100-MM)  
46. 8C-3338 [4] DOWEL  
47. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
48. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
49. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
50. 8T-4140 CM [2] BOLT (M16X2X60-MM)  
51. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
52. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
53. 8T-7547 CM [4] BOLT (M8X1.25X30-MM)  
54. 8T-9599 [1] RING-RETAINING  
55. 9S-4191 [2] PLUG (9/16-18-THD)  
56. 269-2433 [4] BEARING-CRADLE  
57. 268-6265 [1] PLATE  
58. 268-6263 [2] CAM  
59. 192-0573 [4] PIN-DOWEL  
   
    AVAILABLE REPAIR KIT(S):
  327-8740 J [1] KIT-SEAL (GEAR PUMP)  
    (INCLUDES GASKETS, SEALS & RETAINER RING)
  353-5511 N [1] KIT-SEAL  
    (INCLUDES GASKETS, SEAL & RETAINER RING)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICE(S) PARTS MARKED J
  M   METRIC PART
  N   KIT MARKED N SERVICE(S) PARTS MARKED N
  Y   SEPARATE ILLUSTRATION
 

#SEBP44520289
 

176-8134: PUMP GP-PISTON

176-8134 PUMP GP-PISTON -MAIN HYDRAULIC
S/N PAD1-376
PART OF 162-6312 PUMP & MTG GP-MAIN HYDRAULIC
i02296053 SEBP4452
1768134 PUMP GP-PISTON Parts scheme 1768134 PUMP GP-PISTON Parts scheme
  For full view, you need register

Parts for your 311C EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-8802 [1] SHAFT-INPUT  
2. 199-7460 [1] BLOCK-PORT  
3. 173-1203 [1] PUMP GP-GEAR  
4. 225-6216 C [1] GASKET  
5. 165-2804 C [1] FLANGE  
6. 8T-4139 M [8] BOLT (M12X1.75X30-MM)  
7. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
8. 7X-2553 M [6] BOLT (M16X2X40-MM)  
9. 165-2801 [2] BEARING-ROLLER  
10. 165-3851 [4] BEARING-CRADLE  
11. 165-3847 [18] PISTON AS  
12. 165-2799 [12] SPRING  
13. 6V-7991 [1] SEAL-O-RING  
14. 165-3839 [1] BARREL AS  
15. 165-3852 [2] BEARING AS-NEEDLE  
16. 095-1663 [1] SEAL-O-RING  
17. 190-4896 [2] PLUG  
18. 207-2985 [2] ORIFICE  
19. 176-0581 [1] CASE  
20. 165-2793 [2] RETAINER  
21. 165-2794 [2] RETAINER-BALL  
22. 6V-8144 [2] RING-RETAINING  
23. 1J-6472 [2] RING-RETAINING  
24. 165-2802 [1] SEAL-LIP TYPE  
25. 8T-9599 [1] RING-RETAINING  
26. 1H-7339 [1] SEAL-O-RING  
27. 2H-9247 [2] SEAL-O-RING  
28. 8T-4185 M [4] BOLT (M10X1.5X50-MM)  
29. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
30. 165-3849 [2] CAM  
31. 176-8131 [2] SPACER-SPECIAL  
32. 165-2805 [2] BLOCK  
33. 165-3838 [1] BARREL AS  
34. 176-8132 [2] BEARING  
35. 8C-3338 [4] DOWEL  
36. 165-3853 [1] COVER  
37. 199-0518 [12] SEAL-O-RING  
38. 176-1026 [1] PLATE  
39. 222-2063 C [1] SHAFT-DRIVE  
40. 4T-1860 Y [1] VALVE GP-SHUTTLE (BALL RESOLVER)  
41. 8T-4140 M [1] BOLT (M16X2X60-MM)  
42. 094-1882 [15] PLUG  
43. 9S-4191 [3] PLUG (9/16-18-THD)  
44. 3J-1907 [3] SEAL-O-RING  
45. 174-7212 Y [2] ACTUATOR GP-PUMP  
46. 094-1875 [10] DOWEL  
47. 111-9916 Y [1] VALVE GP-SOLENOID (PRESSURE REDUCING)(FLOW CONTROL)  
48. 7I-2272 M [2] BOLT (M5X0.8X12-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 311C :

LINES GP-SWING MOTOR
168-9484 LINES GP-SWING MOTOR
LINES GP-STICK DRAIN
244-5316 LINES GP-STICK DRAIN
LINES GP-STICK DRAIN
244-5315 LINES GP-STICK DRAIN
LINES GP-STICK CYLINDER
203-5666 LINES GP-STICK CYLINDER
LINES GP-STICK CYLINDER
179-7858 LINES GP-STICK CYLINDER
LINES GP-STICK
194-0335 LINES GP-STICK
LINES GP-STICK
194-0334 LINES GP-STICK
LINES GP-SENSOR
244-5296 LINES GP-SENSOR
MOTOR GP-SWING
170-9896 MOTOR GP-SWING
MOTOR GP-TRAVEL
199-6413 MOTOR GP-TRAVEL
MOUNTING GP-VALVE
179-7455 MOUNTING GP-VALVE
PUMP & MTG GP-AUXILIARY
244-5214 PUMP & MTG GP-AUXILIARY
PUMP & MTG GP-MAIN HYDRAULIC
162-6312 PUMP & MTG GP-MAIN HYDRAULIC
PUMP & MTG GP-MAIN HYDRAULIC
195-0019 PUMP & MTG GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
185-1726 PUMP GP-MAIN HYDRAULIC
PUMP GP-MAIN HYDRAULIC
185-1726 PUMP GP-MAIN HYDRAULIC

Truck sale:

 
 
CATERPILLAR 311C 2005
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
CATERPILLAR 311C 2007
- TRACK EXCAVATORS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
 
 
2008 CAT 311C

EURO AUCTIONS
United Kingdom
CATERPILLAR 311 C 2006
 
CATERPILLAR 311 C 2006
- TRACK EXCAVATORS
PON EQUIPMENT DENMARK
Denmark
 
 
2007 CAT 311C

EURO AUCTIONS
United Kingdom
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.