242-6506 LINES GP-BOOM -MASS BOOM, MEDIUM PRESSURE S/N DHK1-UP STICK LOWERING CONTROL VALVE PART OF 239-8679 VALVE AR-LOAD CONTROL Type 2 AN ATTACHMENT 320D

HYDRAULIC SYSTEM

LINES GP-BOOM

0. 242-6506 LINES GP-B
1. 260-8010 LINES GP-B
2. 268-7046 LINES GP-B

LINES GP-CYLINDER

3. 239-1699 LINES GP-B
4. 239-1727 LINES GP-B
5. 242-6732 LINES GP-B
6. 242-6737 LINES GP-B
7. 266-8022 LINES GP-B
8. 266-8023 LINES GP-B

LINES GP-BUCKET

9. 127-6624 LINES GP-B
0. INFORMATION

EXCAVATOR 320D EXCAVATOR CXY
320D & 320D L Excavators CXY00001-UP (MACHINE) POWERED BY 3066 Engine SEBP4454 320D CXY (2005)

HYDRAULIC SYSTEM

LINES GP-BOOM

242-6505 LINES GP-BOOM

242-6506 LINES GP-BOOM

260-8010 LINES GP-BOOM

268-7046 LINES GP-BOOM

#SEBP44540470

242-6506: LINES GP-BOOM

LINES GP-BOOM

242-6506 LINES GP-BOOM -MASS BOOM, MEDIUM PRESSURE
S/N DHK1-UP
STICK LOWERING CONTROL VALVE
PART OF 239-8679 VALVE AR-LOAD CONTROL
Type 2
AN ATTACHMENT

i02600513 SEBP4454

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5Q-4213 C	[4]	CLIP
2.	7K-1181 C	[4]	STRAP-CABLE
3.	113-6738 I	[2]	HOSE AS
4.	179-5030 CJ	[4]	CLIP
5.	202-3915 C	[1]	PLATE
6.	236-2970 CI	[1]	HOSE AS
7.	282-5567 C	[1]	PLATE
8.	282-5681 C	[1]	TUBE AS
9.	149-5452	[2]	UNION AS (STRAIGHT)
			(EACH INCLUDES)
	6V-8397	[2]	SEAL-O-RING
	6V-8994	[1]	UNION (STRAIGHT)
10.	5Q-4212 C	[2]	CLIP
11.	6V-8398 C	[2]	SEAL-O-RING
12.	6V-9168	[2]	NUT (11/16-16-THD)
13.	7X-2549 CM	[2]	BOLT (M12X1.75X100-MM)
14.	8T-4139 CM	[4]	BOLT (M12X1.75X30-MM)
15.	8T-4223 C	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
16.	8T-4244 CM	[4]	NUT (M12X1.75-THD)
17.	8T-7930 CJM	[2]	BOLT (M12X1.75X160-MM)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		USED WHEN MACHINE IS EQUIPPED WITH AUX HYD (MED PRESS.) LINES
	M		METRIC PART

#SEBP44540471

260-8010: LINES GP-BOOM

LINES GP-BOOM

260-8010 LINES GP-BOOM
S/N DHK1-UP; CXY1-UP
PART OF 240-3828, 240-3830, 240-3832, 240-3836 BOOM AR-1 PIECE LONG
AN ATTACHMENT

i02424254 SEBP4454

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1674	[6]	CLIP
2.	4I-1676	[6]	CLIP
3.	7Y-4868	[8]	CLIP
4.	307-5034	[1]	TUBE AS
5.	202-3855	[1]	TUBE AS
6.	202-3856	[1]	TUBE AS
7.	202-3857	[1]	TUBE AS
8.	202-3858	[1]	TUBE AS
9.	202-6996 I	[1]	HOSE AS
10.	260-8315	[1]	TUBE AS
11.	260-8316 I	[1]	HOSE AS
12.	1P-3703	[2]	SEAL-RECTANGULAR
13.	6V-0400	[4]	FLANGE-HALF
14.	6V-9746	[9]	SEAL-O-RING
15.	8T-4139 M	[20]	BOLT (M12X1.75X30-MM)
16.	8T-4184 M	[8]	BOLT (M12X1.75X45-MM)
17.	8T-4223	[28]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP44540472

268-7046: LINES GP-BOOM

LINES GP-BOOM

268-7046 LINES GP-BOOM
S/N DHK1-UP
PART OF 262-3176 LINKAGE AR
AN ATTACHMENT

i02423468 SEBP4454

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1676	[12]	CLIP
2.	4I-8789	[1]	VALVE-CHECK
3.	6I-6721	[1]	ELBOW
4.	359-8784 I	[1]	HOSE AS
5.	268-7047	[1]	TUBE AS
6.	268-7048	[1]	TUBE AS
7.	268-7049	[1]	TUBE AS
8.	268-7238	[2]	TUBE AS
9.	268-7239	[1]	TUBE AS
10.	268-7240	[1]	TUBE AS
11.	148-8335	[1]	CONNECTOR AS
	5K-9090	[1]	SEAL-O-RING
	6V-8635	[1]	CONNECTOR
	7M-8485	[1]	SEAL-O-RING
12.	1P-3704	[1]	SEAL-RECTANGULAR
13.	4I-1674	[12]	CLIP
14.	5K-9090	[4]	SEAL-O-RING
15.	6V-9746	[7]	SEAL-O-RING
16.	7M-8485	[1]	SEAL-O-RING
17.	7Y-4868	[12]	CLIP
18.	8T-4139 M	[36]	BOLT (M12X1.75X30-MM)
19.	8T-4223	[36]	WASHER-HARD (13.5X25.5X3-MM THK)
20.	8T-4648 M	[4]	BOLT (M12X1.75X70-MM)
21.	359-8787 I	[1]	HOSE AS
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP44540473

239-1699: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

239-1699 LINES GP-BOOM CYLINDER
S/N DHK1-UP; CXY1-UP
PART OF 259-7462, 259-7463 HYDRAULIC AR

i02417853 SEBP4454

2391699 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1674	[2]	CLIP
2.	9F-2167	[1]	SCREW-PURGE (3/8-24X1.164-IN)
3.	101-7398 M	[4]	BOLT-SOCKET HEAD (M10X1.5X40-MM)
4.	108-7354 I	[1]	HOSE AS
5.	108-7550	[1]	CLIP
6.	124-1047 I	[4]	HOSE AS
7.	124-1062	[1]	SUPPORT AS
8.	142-7768	[1]	TUBE AS
9.	142-7769	[1]	TUBE AS
10.	158-9090 Y	[1]	VALVE GP-SWING CUSHION (FINE SWING)
11.	164-5552	[1]	CONNECTOR AS
	3D-2824	[1]	SEAL-O-RING
	4I-7745	[1]	CONNECTOR
	6V-8398	[1]	SEAL-O-RING
12.	234-4492	[1]	SUPPORT
13.	101-7404 M	[4]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
14.	133-5828	[1]	SUPPORT AS
15.	307-4918	[1]	CONNECTOR AS
	5K-9090	[1]	SEAL-O-RING
	6V-8635	[1]	CONNECTOR
	7M-8485	[1]	SEAL-O-RING
16.	148-8353	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9001	[1]	ELBOW
17.	148-8364	[1]	ELBOW AS
	3K-0360	[1]	SEAL-O-RING
	6V-8398	[1]	SEAL-O-RING
	6V-8625	[1]	ELBOW
18.	148-8444	[1]	TEE AS-SWIVEL
	6V-8398	[2]	SEAL-O-RING
	6V-9837	[1]	TEE-SWIVEL
19.	148-8367	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
20.	1P-3703	[2]	SEAL-RECTANGULAR
21.	5P-1076	[2]	WASHER-HARD (13.5X30X4-MM THK)
22.	6V-9746	[4]	SEAL-O-RING
23.	8T-4121	[8]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
25.	8T-4178 M	[6]	BOLT (M10X1.5X90-MM)
26.	8T-4182 M	[8]	BOLT (M10X1.5X45-MM)
27.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
28.	8T-4223	[6]	WASHER-HARD (13.5X25.5X3-MM THK)
29.	8T-4648 M	[2]	BOLT (M12X1.75X70-MM)
30.	8T-4910 M	[2]	BOLT (M12X1.75X60-MM)
31.	8T-9403	[4]	FLANGE-HALF
32.	148-8336	[1]	CONNECTOR AS
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44540474

239-1727: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

239-1727 LINES GP-BOOM CYLINDER -LOWERING CONTROL
S/N DHK1-UP; CXY1-UP
PART OF 259-7486 VALVE AR-LOAD CONTROL
AN ATTACHMENT

i02426212 SEBP4454

2391727 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4I-1674	[4]	CLIP
2.	7K-1181	[12]	STRAP-CABLE
3.	119-2804	[2]	SUPPORT AS
4.	149-1738	[4]	CLIP
5.	223-7039	[4]	HOSE AS
6.	225-4785 Y	[2]	VALVE GP-LOAD CONTROL (BOOM CYLINDER)
7.	245-5122	[1]	BLOCK
8.	255-2001	[1]	BLOCK
9.	266-1110	[1]	TUBE AS
10.	266-1111	[1]	TUBE AS
11.	266-1112	[1]	TUBE AS
12.	282-7202	[1]	TUBE AS
13.	266-1114	[1]	TUBE AS
14.	266-1115	[1]	TUBE AS
15.	266-1116	[2]	SUPPORT AS
16.	266-1118	[1]	SUPPORT AS
17.	278-6498 I	[2]	HOSE AS
18.	266-1147 I	[1]	HOSE AS
19.	148-8326	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-7354	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-9872	[1]	CONNECTOR
20.	148-8336	[6]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
21.	148-8341	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
22.	148-8347	[1]	ELBOW AS
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
23.	148-8378	[4]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
24.	148-8390	[2]	ELBOW AS
			(EACH INCLUDES)
	2M-9780	[1]	SEAL-O-RING
	6V-8626	[1]	ELBOW
	7J-9108	[1]	SEAL-O-RING
25.	148-8411	[1]	PLUG AS
	3K-0360	[1]	SEAL-O-RING
	9S-4185	[1]	PLUG (3/4-16-THD)
26.	1P-3703	[6]	SEAL-RECTANGULAR
27.	6V-9746	[4]	SEAL-O-RING
28.	7J-9108	[2]	SEAL-O-RING
29.	8T-0341 M	[8]	BOLT-SOCKET HEAD (M10X1.5X60-MM)
30.	8T-4121	[18]	WASHER-HARD (11X21X2.5-MM THK)
31.	8T-4139 M	[2]	BOLT (M12X1.75X30-MM)
32.	8T-4185 M	[8]	BOLT (M10X1.5X50-MM)
33.	8T-4186 M	[2]	BOLT (M10X1.5X40-MM)
34.	8T-4192 M	[2]	BOLT (M12X1.75X25-MM)
35.	8T-4196 M	[8]	BOLT (M10X1.5X35-MM)
36.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
37.	8T-4956 M	[8]	BOLT (M12X1.75X35-MM)
38.	8T-6466 M	[8]	BOLT (M10X1.5X60-MM)
39.	282-7197	[1]	HOSE AS
40.	148-8367	[1]	ELBOW AS
	6V-8397	[1]	SEAL-O-RING
	6V-9850	[1]	ELBOW
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP44540475

242-6732: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

242-6732 LINES GP-BOOM CYLINDER -LH
S/N DHK1-UP; CXY1-UP
PART OF 242-6730, 242-6745, 349-4124 CYLINDER & LINES GP-BOOM
AN ATTACHMENT

i02420835 SEBP4454

2426732 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	247-8869	[1]	TUBE AS
2.	222-0126	[1]	TUBE AS
3.	095-1597	[2]	SEAL-O-RING
4.	9X-6032 M	[8]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
5.	137-3709	[1]	SUPPORT AS
6.	4I-3621	[1]	SUPPORT
7.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
8.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	8T-3653 M	[1]	BOLT (M14X2X80-MM)
10.	3B-4509	[1]	LOCKWASHER
11.	094-1920	[2]	CLAMP
	M		METRIC PART

#SEBP44540476

242-6737: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

242-6737 LINES GP-BOOM CYLINDER -RH
S/N DHK1-UP; CXY1-UP
PART OF 242-6736, 242-6749, 349-4125 CYLINDER & LINES GP-BOOM
AN ATTACHMENT

i02421016 SEBP4454

2426737 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	247-8870	[1]	TUBE AS
2.	222-0124	[1]	TUBE AS
3.	095-1597	[2]	SEAL-O-RING
4.	9X-6032 M	[8]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
5.	137-3709	[1]	SUPPORT AS
6.	4I-3621	[1]	SUPPORT
7.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
8.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	8T-3653 M	[1]	BOLT (M14X2X80-MM)
10.	3B-4509	[1]	LOCKWASHER
11.	094-1920	[2]	CLAMP
	M		METRIC PART

#SEBP44540477

266-8022: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

266-8022 LINES GP-BOOM CYLINDER -LH
S/N DHK1-UP; CXY1-UP
PART OF 266-7970 CYLINDER & LINES GP-BOOM
AN ATTACHMENT

i02422977 SEBP4454

2668022 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	247-8869	[1]	TUBE AS
2.	222-0126	[1]	TUBE AS
3.	266-7964	[2]	SEAL-O-RING
4.	9X-6032 M	[8]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
5.	137-3709	[1]	SUPPORT AS
6.	4I-3621	[1]	SUPPORT
7.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
8.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	8T-3653 M	[1]	BOLT (M14X2X80-MM)
10.	3B-4509	[1]	LOCKWASHER
11.	094-1920	[2]	CLAMP
	M		METRIC PART

#SEBP44540478

266-8023: LINES GP-BOOM CYLINDER

LINES GP-BOOM CYLINDER

266-8023 LINES GP-BOOM CYLINDER -RH
S/N DHK1-UP; CXY1-UP
PART OF 266-7971 CYLINDER & LINES GP-BOOM
AN ATTACHMENT

i02422984 SEBP4454

2668023 LINES GP-BOOM CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	266-7964	[2]	SEAL-O-RING
2.	9X-6032 M	[8]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
3.	222-0124	[1]	TUBE AS
4.	247-8870	[1]	TUBE AS
5.	094-1920	[2]	CLAMP
6.	8T-3653 M	[1]	BOLT (M14X2X80-MM)
7.	3B-4509	[1]	LOCKWASHER
8.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
9.	8T-4896	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
10.	4I-3621	[1]	SUPPORT
11.	137-3709	[1]	SUPPORT AS
	M		METRIC PART

#SEBP44540479

127-6624: LINES GP-BUCKET CYLINDER

LINES GP-BUCKET CYLINDER

127-6624 LINES GP-BUCKET CYLINDER
S/N DHK1-UP
PART OF 262-3176 LINKAGE AR
FOR USE WITH 6.28-M (20.6-FT) STICK
AN ATTACHMENT

i01342032 SEBP4454

1276624 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 320D EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5I-7233	[2]	TUBE AS
2.	4I-5556 I	[2]	HOSE AS
3.	7Y-7904 I	[2]	HOSE AS
4.	7Y-4868	[16]	CLIP
5.	6V-9746	[8]	SEAL-O-RING
6.	8T-4139 M	[16]	BOLT (M12X1.75X30-MM)
7.	8T-4223	[16]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART