AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

222-8021 BLADE GP-ANGLING S/N B9Z1-UP PART OF 222-8020 BULLDOZER AR-PWR ANGLE & TILT AN ATTACHMENT D6R III


WORK TOOLS
BLADE GP
GROUND ENGAGING TOOLS (G.E.T.)
ELECTRICAL AND STARTING SYSTEM
RECEIVER GP
WORK TOOLS
RIPPER GP

TRACK-TYPE TRACTOR D6R III TRACK-TYPE TRACTOR DLM
 D6R Series III TRACK-TYPE TRACTOR PAT XL, PAT XW, PAT LGP Differential Steering DLM00001-UP (MACHINE) POWERED BY C9 Engine SEBP4458 D6R III DLM   (2005)

WORK TOOLS

BLADE GP
BLADE & EDGE GP-ANGLING
219-4260 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
223-2350 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
223-3280 BLADE & EDGE GP-ANGLING
BLADE GP-ANGLING
214-2292 BLADE GP-ANGLING
BLADE GP-ANGLING
222-8016 BLADE GP-ANGLING
BLADE GP-ANGLING
222-8021 BLADE GP-ANGLING
 

#SEBP44580740
 

222-8021: BLADE GP-ANGLING

222-8021 BLADE GP-ANGLING
S/N B9Z1-UP
PART OF 222-8020 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i02429384 SEBP4458
2228021 BLADE GP-ANGLING Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 104-4817 [1] PIN  
4. 214-2295 [2] ADAPTER  
5. 223-2350 Y [1] BLADE & EDGE GP-ANGLING  
6. 223-3279 [1] RETAINER  
7. 226-7191 [2] RETAINER  
8. 226-7192 [4] SPACER (50.8X57.15X25-MM THK)  
9. 245-1168 [2] PIN  
10. 279-6640 [4] PAD  
11. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
12. 7X-2577 M [8] BOLT (M24X3X90-MM)  
13. 8T-4123 [1] WASHER (3.62X5.75X0.375-MM THK)  
14. 8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
15. 8T-6430 M [1] BOLT (M20X2.5X50-MM)  
16. 8T-7338 M [2] BOLT (M16X2X45-MM)  
17. 214-2286 B [8] SHIM (0.8-MM THK)  
18. 9J-4782 [1] PROTECTOR  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP44580741
 

219-4270: EDGE GP-BIT & CUTTING

219-4270 EDGE GP-BIT & CUTTING
S/N B8X1-UP
PART OF 219-4260 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i02436890 SEBP4458
2194270 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-8874 [1] BIT-END (RH)  
2. 9W-8875 [1] BIT-END (LH)  
3. 219-4599 [2] EDGE-CUTTING  
4. 2J-3506 [32] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [32] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [32] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP44580742
 

223-3290: EDGE GP-BIT & CUTTING

223-3290 EDGE GP-BIT & CUTTING
S/N MTJ1-UP; B9S1-UP; B9Z1-UP
PART OF 223-2350, 223-3280 BLADE & EDGE GP-ANGLING
AN ATTACHMENT
i02436745 SEBP4458
2233290 EDGE GP-BIT & CUTTING Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9W-8874 [1] BIT-END (RH)  
2. 9W-8875 [1] BIT-END (LH)  
3. 229-6958 [2] EDGE-CUTTING  
4. 2J-3506 [34] NUT-FULL (3/4-10-THD)  
5. 5J-4773 [34] BOLT-PLOW (3/4-10X2.5-IN)  
6. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
 

#SEBP44580743
 

245-4139: MOUNTING GP-MAST

245-4139 MOUNTING GP-MAST -GRADE CONTROL
S/N RFC1-UP; MTJ1-UP; DLM1-UP
AN ATTACHMENT
i02431611 SEBP4458
2454139 MOUNTING GP-MAST Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 279-9894 [1] PLATE AS  
2. 279-9900 [2] BRACKET AS  
3. 8T-4139 M [4] BOLT (M12X1.75X30-MM)  
4. 8T-4184 M [12] BOLT (M12X1.75X45-MM)  
5. 8T-4223 [16] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP44580744
 

245-4140: MOUNTING GP-MAST

245-4140 MOUNTING GP-MAST -GRADE CONTROL
S/N RFC1-UP; MTJ1-UP; DLM1-UP
AN ATTACHMENT
i02431620 SEBP4458
2454140 MOUNTING GP-MAST Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 247-5708 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-4183 M [10] BOLT (M12X1.75X40-MM)  
  8T-4223 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
2. 248-2336 [1] PLATE AS  
  189-9240 [1] LINK  
  M   METRIC PART
 

#SEBP44580745
 

292-0302: MOUNTING GP-MAST

292-0302 MOUNTING GP-MAST -LASER RECEIVER
S/N RFC1-UP; MTJ1-UP; DLM1-UP
ELECTRIC
PART OF 292-0293, 292-0312 GRADE CONTROL AR-LASER
i02648770 SEBP4458
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4648 M [4] BOLT (M12X1.75X70-MM)  
  237-7552 [3] FILM-WARNING (LASER TRANSMITTER)  
  252-8744 [1] FILM-WARNING (BLADE, DO NOT CLIMB, READ OMM)  
  8T-4244 M [4] NUT (M12X1.75-THD)  
  8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP44580746
 

292-0303: MOUNTING GP-MAST

292-0303 MOUNTING GP-MAST -SATELLITE RECEIVER
S/N RFC1-UP; MTJ1-UP; DLM1-UP
SOLID
PART OF 290-5571, 292-0280 GRADE CONTROL AR-SATELLITE, 292-0290 MAST GP
i02618522 SEBP4458
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  8T-4648 M [4] BOLT (M12X1.75X70-MM)  
  252-8744 [1] FILM-WARNING (BLADE, DO NOT CLIMB, READ OMM)  
    ON THE REAR OF THE MAST AT EYE LEVEL
  8T-4244 M [4] NUT (M12X1.75-THD)  
  8T-4223 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP44580747
 

224-4454: MOUNTING GP-RIPPER

224-4454 MOUNTING GP-RIPPER
S/N R1G1-UP
PART OF 224-4449 RIPPER AR
AN ATTACHMENT
i02422772 SEBP4458
2244454 MOUNTING GP-RIPPER Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-0300 [1] BRACKET AS  
  3G-9995 [2] PLATE  
2. 1U-0301 [2] BRACKET AS  
    (EACH INCLUDES)
  2K-6279 [1] BOSS  
3. 7T-1975 [1] BRACKET AS  
  3G-9995 [2] PLATE  
4. 9N-4449 B [12] SPACER (68X121X1.5-MM THK)  
5. 9N-4450 B [4] SPACER (68X120X5-MM THK)  
6. 9W-0609 [4] SPACER (53X100X35-MM THK)  
7. 1U-0159 [2] PIN  
8. 1U-0612 [2] PIN  
9. 9M-5854 [20] STUD-TAPERLOCK (1-8-THD)  
10. 6V-7687 M [2] LOCKNUT (M12X1.75-THD)  
11. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
12. 6V-8190 [20] NUT (1-8-THD)  
13. 7X-2543 M [2] BOLT (M10X1.5X120-MM)  
14. 8T-5361 [20] WASHER-HARD (28X49X5-MM THK)  
15. 8T-5412 M [2] BOLT (M12X1.75X140-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP44580748
 

224-4449: RIPPER AR

224-4449 RIPPER AR
S/N R1G1-UP
Type 1
AN ATTACHMENT
i02422770 SEBP4458
2244449 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 224-4454 Y [1] MOUNTING GP-RIPPER  
3. 227-0842 Y [1] CYLINDER GP-RIPPER  
4. 235-8180 Y [1] LINES GP-RIPPER  
5. 235-8805 Y [1] RIPPER GP  
   
  7X-7644 F [2] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER)
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    (ON CARRIAGE AS ON RH SIDE OF RH TOWER)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

#SEBP44580749
 

224-4449: RIPPER AR

224-4449 RIPPER AR
S/N R1G1-UP
Type 2
AN ATTACHMENT
i03600621 SEBP4458
2244449 RIPPER AR Parts scheme
  For full view, you need register

Parts for your D6R III TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-1356 Y [1] GUARD GP-TRANSMISSION  
2. 224-4454 Y [1] MOUNTING GP-RIPPER  
3. 325-5723 CY [1] CYLINDER GP-RIPPER  
4. 235-8180 Y [1] LINES GP-RIPPER  
5. 235-8805 Y [1] RIPPER GP  
   
  7X-7644 F [2] FILM-IDENTIFICATION (TIE-DOWN)  
    (ON RH & LH SIDE OF TRACK ROLLER FRAME CENTERED BETWEEN FRONT ROLLER & REAR IDLER)
  8M-3494 F [1] PLATE-SERIAL NUMBER (RIPPER)  
    (ON CARRIAGE AS ON RH SIDE OF RH TOWER)
  4B-4158 F [2] SCREW-DRIVE (NO 4X0.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060}
Installation of the Variable Pitch, Angle, and Tilt Blade (S/N: R1W; R2W; R3W) on D6R XL, D6R XW, and D6R LGP Machines{6060}
Procedure for Field Installation of the Deflector Plate{6701}
Procedure for Field Installation of the Deflector Plate{6701}
Welding Procedure for the Pitch Link Pins{6060, 6063}
Welding Procedure for the Pitch Link Pins{6060, 6063}
Installation Of New Tilt Lines For D6R Series III And D6T Machines With A VPAT Blade{5057, 5104, 6060}
Installation Of New Tilt Lines For D6R Series III And D6T Machines With A VPAT Blade{5057, 5104, 6060}
Specifications
Bulldozer Blade
D6R Series III Track-Type Tractor Hydraulic System
Disassembly and Assembly
Bulldozer Blade (VPAT) - Install
D6R Series III Track-Type Tractor Machine Systems
Bulldozer Blade (VPAT) - Remove
D6R Series III Track-Type Tractor Machine Systems
Bulldozer Blade - Remove
D6R Series III Track-Type Tractor Machine Systems
Bulldozer Blade - Install
D6R Series III Track-Type Tractor Machine Systems
Service Magazine
Improved Pin in the Angle Cylinder Rod Eye for Certain D6R and D6T Track-Type Tractors {6052, 6060, 6063, 6701}
Improved Pin in the Angle Cylinder Rod Eye for Certain D6R and D6T Track-Type Tractors {6052, 6060, 6063, 6701}
Improved Center Blade Trunnion Serviceability And Trunnion Cap Retention Is Available For Certain D6T and D6R III VPAT Track-Type Tractors {6060}
Improved Center Blade Trunnion Serviceability And Trunnion Cap Retention Is Available For Certain D6T and D6R III VPAT Track-Type Tractors {6060}

Caterpillar Parts SIS Catalog D6R III :

BLADE GP-ANGLING
222-8016 BLADE GP-ANGLING
BLADE GP-ANGLING
214-2292 BLADE GP-ANGLING
BLADE & EDGE GP-ANGLING
223-3280 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
223-2350 BLADE & EDGE GP-ANGLING
BLADE & EDGE GP-ANGLING
219-4260 BLADE & EDGE GP-ANGLING
WIPER PIVOT GP
101-0742 WIPER PIVOT GP
WIPER GP-WINDOW
224-4357 WIPER GP-WINDOW
8E-5114 WINDOW GP-SLIDING
EDGE GP-BIT & CUTTING
219-4270 EDGE GP-BIT & CUTTING
EDGE GP-BIT & CUTTING
223-3290 EDGE GP-BIT & CUTTING
MOUNTING GP-MAST
245-4139 MOUNTING GP-MAST
MOUNTING GP-MAST
245-4140 MOUNTING GP-MAST
292-0302 MOUNTING GP-MAST
292-0303 MOUNTING GP-MAST
MOUNTING GP-RIPPER
224-4454 MOUNTING GP-RIPPER
RIPPER AR
224-4449 RIPPER AR

Truck sale:

Caterpillar D6RIIILGP, Construction
80,000 
Caterpillar D6RIIILGP, Construction
- Dozers
FOLEY, INC.
Caterpillar D6RIIIXL, Construction
 
Caterpillar D6RIIIXL, Construction
- Dozers
MANTRAC GHANA LIMITED
Ghana
Caterpillar D6RIII, Construction
78,100 
Caterpillar D6RIII, Construction
- Dozers
PT CATERPILLAR FINANCE INDONESIA
Indonesia
Caterpillar D6RIIILGP, Construction
 
Caterpillar D6RIIILGP, Construction
- Dozers
WILLIAM ADAMS PTY. LTD.
Australia
Caterpillar D6RIIIXLVP, Construction
121,700 
Caterpillar D6RIIIXLVP, Construction
- Dozers
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.