AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

110-5226 C-FRAME GP-POWER ANGLING S/N B6C1-UP; B6X1-UP PART OF 223-6303, 262-9873 BULLDOZER AR-PWR ANGLE & TILT AN ATTACHMENT D6N


IMPLEMENTS
C-FRAME GP
LINES GP-GREASE
BULLDOZER GP
OPERATOR STATION
SEAT GP

TRACK-TYPE TRACTOR D6N TRACK-TYPE TRACTOR DJA
 D6N TRACK-TYPE TRACTOR XL, LGP Differential Steering DJA00001-UP (MACHINE) POWERED BY C6.6 Engine SEBP4517 D6N DJA   (2006)

IMPLEMENTS

C-FRAME GP
C-FRAME GP-POWER ANGLING
110-5226 C-FRAME GP-POWER ANGLING
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
 

#SEBP45170590
 

110-5226: C-FRAME GP-POWER ANGLING

110-5226 C-FRAME GP-POWER ANGLING
S/N B6C1-UP; B6X1-UP
PART OF 223-6303, 262-9873 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01621670 SEBP4517
1105226 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 200-2649 [1] FRAME AS  
1A. 145-0804 [1] SLEEVE  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 109-0958 [2] PIN  
4. 4Y-4905 B [6] WASHER (79X175X2-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 124-5741 [2] PIN  
9. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
10. 161-2113 [1] SPACER (60X89.8X231-MM THK)  
11. 160-5691 [1] PIN  
12. 145-0803 [1] PIN  
13. 124-5235 B [6] SHIM (0.8-MM THK)  
14. 124-5234 [2] RETAINER  
15. 105-2058 [1] BRACKET AS  
16. 298-2764 M [4] BOLT (M24X3X190-MM)  
17. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
18. 110-5217 [2] PLATE  
19. 110-5218 [2] PLATE  
20. 104-7434 [1] RETAINER  
21. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
22. 104-4817 [1] PIN  
23. 8G-5747 [4] SPACER (45X50X15-MM THK)  
24. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
25. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
26. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 124-5233 [2] PIN  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP45170591
 

112-7443: C-FRAME GP-POWER ANGLING

112-7443 C-FRAME GP-POWER ANGLING
S/N F6A1-UP; F6C1-UP; G6G1-UP; B6L1-UP; G6M1-UP; B6Y1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING, 223-6304, 225-8292, 267-2837, 274-6627, 274-9834 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01782011 SEBP4517
1127443 C-FRAME GP-POWER ANGLING Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 124-5235 B [6] SHIM (0.8-MM THK)  
2. 089-8249 [2] SPACER (64X72X13-MM THK)  
3. 109-0958 [2] PIN  
4. 8G-5747 [4] SPACER (45X50X15-MM THK)  
5. 104-4746 [2] DOWEL  
6. 108-5794 [4] PLUG-PIPE  
7. 104-7391 [1] CAP  
8. 160-5691 [1] PIN  
9. 161-2113 [1] SPACER (60X89.8X231-MM THK)  
10. 145-0803 [1] PIN  
11. 105-2058 [1] BRACKET AS  
12. 298-2764 M [4] BOLT (M24X3X190-MM)  
13. 8T-1482 [4] WASHER-HARD (26X50X8-MM THK)  
14. 110-5217 [2] PLATE  
15. 110-5218 [2] PLATE  
16. 104-7434 [1] RETAINER  
17. 7X-2562 M [5] BOLT (M20X2.5X45-MM)  
18. 104-4817 [1] PIN  
19. 124-5234 [2] RETAINER  
20. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
21. 8T-5041 M [2] BOLT (M12X1.75X120-MM)  
22. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
23. 124-5233 [2] PIN  
24. 8T-4123 [3] WASHER (3.62X5.75X0.375-MM THK)  
25. 200-2636 C [1] FRAME AS  
25A. 8P-9770 [1] PLATE  
25B. 9R-2640 M [1] BOSS (M12X1.75X25-MM)  
25C. 9R-3572 M [2] BOSS (M12X1.75X20-MM)  
25D. 104-7423 [1] TOWER AS  
25E. 108-8268 [2] BRACKET  
25F. 124-5240 [2] PLATE  
25G. 145-0804 [1] SLEEVE  
25H. 200-2632 [1] TOWER AS  
25J. 200-2633 [1] TOWER AS  
25K. 224-0683 [2] STEP AS  
26. 4Y-4905 B [6] WASHER (79X175X2-MM THK)  
27. 124-5741 [2] PIN  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP45170592
 

349-2450: LINES GP-GREASE

349-2450 LINES GP-GREASE
S/N DJA1-UP; DJY1-UP
PART OF 172-9872, 172-9873, 230-6109, 230-6110 BAR GP-EQUALIZER
ALSO AN ATTACHMENT
i03728301 SEBP4517
3492450 LINES GP-GREASE Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7K-1181 [1] STRAP-CABLE  
2. 173-3660 I [1] HOSE AS  
3. 169-7393 [1] CONNECTOR AS  
  3J-7352 [1] CONNECTOR  
  3J-7354 [1] SEAL-O-RING  
4. 5P-4479 [1] ELBOW (FLARED-LONG)  
5. 6D-3479 [1] CLIP  
6. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4137 M [1] BOLT (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP45170593
 

190-5328: LINK GP-PITCH

190-5328 LINK GP-PITCH
S/N F6A1-UP; B6C1-UP; F6C1-UP; G6G1-UP; B6L1-UP; G6M1-UP; B6X1-UP; B6Y1-UP
PART OF 225-8291 BULLDOZER AR-ANGLING, 223-6303, 223-6304, 225-8292, 262-9873, 267-2837, 274-6627, 274-9834 BULLDOZER AR-PWR ANGLE & TILT
AN ATTACHMENT
i01581543 SEBP4517
1905328 LINK GP-PITCH Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)(PITCH LINK)  
2. 7J-1309 [2] BEARING  
3. 188-3757 [1] LINK  
4. 1S-3311 [2] RING-RETAINING  
 

#SEBP45170594
 

115-4472: PUSH ARM GP

115-4472 PUSH ARM GP
S/N S6A1-761
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00492897 SEBP4517
1154472 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-0255 [2] PIN  
2. 4T-1520 [1] CAGE AS  
2A. 6J-5383 [1] BEARING  
3. 8E-5701 B [52] SHIM (0.8-MM THK)  
4. 8E-5703 B [78] SHIM (0.8-MM THK)  
5. 8J-2880 [3] CAP AS-BEARING  
6. 115-3523 Y [1] CYLINDER GP-TILT  
7. 115-4473 [1] ARM AS (RH)  
7A. 3G-6313 [1] BEARING  
7B. 1U-2533 [1] BAR  
7C. 4T-0732 [1] BRACKET  
7D. 179-6153 [1] BEARING  
7E. 8P-9770 [1] PLATE  
8. 115-4474 [1] ARM AS (LH)  
8A. 3G-6313 [1] BEARING  
8B. 1U-2533 [1] BAR  
8C. 4T-0780 [1] TRUNNION  
8D. 179-6153 [1] BEARING  
8E. 8P-9770 [1] PLATE  
8F. 115-4522 [1] BRACKET  
9. 124-9672 [1] BRACE AS-TILT  
9A. 8E-2887 [1] YOKE  
10. 160-6306 [2] CAP-BEARING  
11. 3B-4626 [2] PIN-COTTER  
12. 3F-6185 [2] PIN  
13. 6V-9167 M [8] BOLT (M20X2.5X140-MM)  
14. 7X-2566 M [6] BOLT (M20X2.5X110-MM)  
15. 8C-8478 M [4] BOLT (M20X2.5X140-MM)  
16. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
17. 8T-4131 M [22] NUT (M20X2.5-THD)  
18. 8T-5439 [6] WASHER-HARD (21.5X45X6-MM THK)  
19. 8T-6381 M [4] BOLT (M20X2.5X120-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45170595
 

320-5056: PUSH ARM GP

320-5056 PUSH ARM GP
S/N S6A762-UP
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
Type 1
AN ATTACHMENT
i03149974 SEBP4517
3205056 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4F-0255 [2] PIN  
2. 4T-1520 [1] CAGE AS  
  6J-5383 [1] BEARING  
3. 8E-5701 B [52] SHIM (0.8-MM THK)  
4. 8E-5703 B [78] SHIM (0.8-MM THK)  
5. 8J-2880 [3] CAP AS-BEARING  
6. 115-4473 [1] ARM AS (RH)  
  1U-2533 [1] BAR  
  3G-6313 [1] BEARING  
  4T-0732 [1] BRACKET  
  8P-9770 [1] PLATE  
  179-6153 [1] BEARING  
7. 115-4474 [1] ARM AS (LH)  
  1U-2533 [1] BAR  
  3G-6313 [1] BEARING  
  4T-0780 [1] TRUNNION  
  8P-9770 [1] PLATE  
  115-4522 [1] BRACKET  
  179-6153 [1] BEARING  
8. 124-9672 [1] BRACE AS-TILT  
  8E-2887 [1] YOKE  
  8P-9770 [1] PLATE  
9. 160-6306 [2] CAP-BEARING  
10. 233-9134 Y [1] CYLINDER GP-TILT  
11. 3B-4627 [2] PIN-COTTER  
12. 3F-6185 [2] PIN  
13. 6V-9167 M [8] BOLT (M20X2.5X140-MM)  
14. 7X-2566 M [6] BOLT (M20X2.5X110-MM)  
15. 8C-8478 M [4] BOLT (M20X2.5X140-MM)  
16. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
17. 8T-4131 M [22] NUT (M20X2.5-THD)  
18. 8T-5439 [6] WASHER-HARD (21.5X45X6-MM THK)  
19. 8T-6381 M [4] BOLT (M20X2.5X120-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45170596
 

320-5056: PUSH ARM GP

320-5056 PUSH ARM GP
S/N S6A762-UP
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
Type 2
AN ATTACHMENT
i07334000 SEBP4517
3205056 PUSH ARM GP Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8C-8478 M [4] BOLT (M20X2.5X140-MM)  
2. 8T-6380 CM [6] BOLT (M24X3X130-MM)  
3. 8T-6381 M [4] BOLT (M20X2.5X120-MM)  
4. 3B-4626 [2] PIN-COTTER  
5. 3F-6185 [2] PIN  
6. 4F-0255 [2] PIN  
7. 6V-9167 M [8] BOLT (M20X2.5X140-MM)  
8. 8E-5701 BC [52] SHIM (0.8-MM THK)  
9. 8E-5703 BC [78] SHIM (0.8-MM THK)  
10. 8J-2880 [3] CAP AS-BEARING  
    (EACH INCLUDES)
  8E-5703 [14] SHIM (0.8-MM THK)  
11. 8T-1482 C [6] WASHER-HARD (26X50X8-MM THK)  
12. 8T-4001 CM [6] NUT (M24X3-THD)  
13. 8T-4131 CM [16] NUT (M20X2.5-THD)  
14. 8T-4167 C [6] WASHER-HARD (26X44X4-MM THK)  
15. 115-4474 [1] ARM AS (LH)  
15A. 3G-6313 [1] BEARING  
15B. 179-6153 [1] BEARING  
  1U-2533 [1] BAR  
  4T-0780 [1] TRUNNION  
  115-4522 [1] BRACKET  
  8P-9770 [1] PLATE  
16. 124-9672 [1] BRACE AS-TILT  
17. 160-6306 [2] CAP-BEARING  
18. 233-9134 Y [1] CYLINDER GP-TILT (BULLDOZER)  
19. 460-2430 C [2] PLATE  
20. 476-3494 C [1] CAGE AS  
20A. 6J-5383 [1] BEARING  
21. 539-5392 C [1] ARM & BEARING AS (RH)  
21A. 3G-6313 [1] BEARING  
21B. 179-6153 [1] BEARING  
  1U-2533 [1] BAR  
  8P-9770 [1] PLATE  
  458-2088 [1] BRACKET  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45170597
 

142-1229: TRUNNION GP-BULLDOZER

142-1229 TRUNNION GP-BULLDOZER
S/N S6A1-951
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i00650777 SEBP4517
1421229 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-1979 [2] SEAL-O-RING  
2. 9U-8909 [2] TRUNNION AS  
    (EACH INCLUDES)
  9J-2759 [1] TRUNNION  
3. 7X-2475 M [20] BOLT (M16X2X130-MM)  
4. 8T-4122 [20] WASHER-HARD (17X32X3.5-MM THK)  
5. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
6. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 143-3148 [2] COVER  
  M   METRIC PART
 

#SEBP45170598
 

319-7125: TRUNNION GP-BULLDOZER

319-7125 TRUNNION GP-BULLDOZER
S/N S6A952-UP
PART OF 273-0030 BULLDOZER AR-SEMI-UNIVERSAL
AN ATTACHMENT
i03149988 SEBP4517
3197125 TRUNNION GP-BULLDOZER Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-3148 [2] COVER  
2. 287-5751 [2] TRUNNION  
3. 5P-1979 [2] SEAL-O-RING  
4. 7X-2475 M [20] BOLT (M16X2X130-MM)  
5. 8T-4122 [20] WASHER-HARD (17X32X3.5-MM THK)  
6. 8T-4192 M [4] BOLT (M12X1.75X25-MM)  
7. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
    QUANTITIES SHOWN ARE THOSE REQUIRED FOR BOTH LH & RH SIDES
  M   METRIC PART
 

#SEBP45170599
 

173-1028: ADJUSTER GP-SEAT

173-1028 ADJUSTER GP-SEAT
S/N DJA1-UP; DJY1-UP
PART OF 178-0603, 180-7304 SEAT GP
ALSO AN ATTACHMENT
i01442827 SEBP4517
1731028 ADJUSTER GP-SEAT Parts scheme
  For full view, you need register

Parts for your D6N TRACK-TYPE TRACTOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-8256 [4] SPRING  
2. 117-4492 [1] ROD  
3. 136-1544 [1] LATCH AS (LH)  
4. 156-5545 [1] LATCH AS (RH)  
5. 164-4531 [1] ROD  
6. 170-1112 [1] PLATE AS  
7. 170-1114 [1] HANDLE (SLIDE ADJUSTMENT)  
8. 170-1115 [1] HANDLE (TILT ADJUSTMENT)  
9. 132-0338 [2] WASHER-PLASTIC (13X31.7X0.8-MM THK)  
10. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
11. 7X-0608 [2] WASHER-HARD (10.2X16X2-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog D6N :

BULLDOZER AR-SEMI-UNIVERSAL
273-0030 BULLDOZER AR-SEMI-UNIVERSAL
BULLDOZER AR-SEMI-UNIVERSAL
273-0030 BULLDOZER AR-SEMI-UNIVERSAL
BULLDOZER AR-SEMI-UNIVERSAL
273-0030 BULLDOZER AR-SEMI-UNIVERSAL
274-9834 BULLDOZER AR-PWR ANGLE & TILT
274-6627 BULLDOZER AR-PWR ANGLE & TILT
267-2837 BULLDOZER AR-PWR ANGLE & TILT
262-9873 BULLDOZER AR-PWR ANGLE & TILT
225-8292 BULLDOZER AR-PWR ANGLE & TILT
C-FRAME GP-POWER ANGLING
112-7443 C-FRAME GP-POWER ANGLING
LINES GP-GREASE
349-2450 LINES GP-GREASE
LINK GP-PITCH
190-5328 LINK GP-PITCH
PUSH ARM GP
115-4472 PUSH ARM GP
PUSH ARM GP
320-5056 PUSH ARM GP
PUSH ARM GP
320-5056 PUSH ARM GP
TRUNNION GP-BULLDOZER
142-1229 TRUNNION GP-BULLDOZER
TRUNNION GP-BULLDOZER
319-7125 TRUNNION GP-BULLDOZER

Truck sale:

 
 
Caterpillar D6N
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6NL AZ2, Crawler dozers, Construction
152,512 
Caterpillar D6NL AZ2, Crawler dozers, Construction
- Crawler dozers
MICHIGAN CAT
Caterpillar D6N, Crawler dozers, Construction
139,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
ZIEGLER CAT
 
110,000 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
WESTERN STATES EQUIPMENT
Caterpillar D6N, Crawler dozers, Construction
 
Caterpillar D6N, Crawler dozers, Construction
- Crawler dozers
CGT - COMPAGNIA GENERALE TRATTORI
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.