UNDERCARRIAGE
SCRAPER GP-IDLERUNDERCARRIAGE GP
TRACK ADJUSTER & RECOIL GP
TRACK GP
UNDERCARRIAGE
SCRAPER GP-IDLER
#SEBP45200500
238-0451: SCRAPER GP-IDLER
238-0451 SCRAPER GP-IDLER -SYSTEMONE
S/N LAE1-UP; PEZ1-UP
PART OF 293-4691, 293-9344 GUARD & SCRAPER GP-IDLER, 218-4982, 222-8667 UNDERCARRIAGE AR
Type 1
S/N LAE1-UP; PEZ1-UP
PART OF 293-4691, 293-9344 GUARD & SCRAPER GP-IDLER, 218-4982, 222-8667 UNDERCARRIAGE AR
Type 1
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP45200501
238-0451: SCRAPER GP-IDLER
238-0451 SCRAPER GP-IDLER -SYSTEMONE
S/N LAE1-UP; PEZ1-UP
PART OF 293-4691, 293-9344 GUARD & SCRAPER GP-IDLER, 218-4982, 222-8667 UNDERCARRIAGE AR
Type 2
S/N LAE1-UP; PEZ1-UP
PART OF 293-4691, 293-9344 GUARD & SCRAPER GP-IDLER, 218-4982, 222-8667 UNDERCARRIAGE AR
Type 2
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS#SEBP45200502
256-6020: STRIKER GP-REAR
256-6020 STRIKER GP-REAR
S/N LAE1-UP; PEZ1-UP
Type 1
CANNOT BE USED WITH RIPPER OR WINCH
AN ATTACHMENT
S/N LAE1-UP; PEZ1-UP
Type 1
CANNOT BE USED WITH RIPPER OR WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-4106 | [1] | PIN AS-DRAWBAR | |
| 2. | 7G-6623 | [1] | HITCH | |
| 3. | 8E-9289 | [1] | LATCH | |
| 4. | 256-6021 Y | [1] | BAR GP-STRIKER | |
| 5. | 2J-3507 | [10] | NUT-FULL (1-8-THD) | |
| 6. | 3K-2889 | [1] | LOCKNUT (5/8-11-THD) | |
| 7. | 5D-3118 | [10] | STUD-TAPERLOCK (1-8-THD) | |
| 8. | 5P-8250 | [10] | WASHER (28X49X5-MM THK) | |
| 9. | 7X-0349 | [1] | BOLT (5/8-11X3-IN) | |
| 10. | 7X-2585 M | [6] | BOLT (M30X3.5X160-MM) | |
| 11. | 9X-8258 | [6] | WASHER (33X56X6-MM THK) | |
| 12. | 149-5933 E | SEAL (42.3-CM EACH) | ||
| 13. | 238-9166 E | SEAL (100-CM) | ||
| 14. | 7X-1456 | [16] | PLUG | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200503
256-6020: STRIKER GP-REAR
256-6020 STRIKER GP-REAR
S/N LAE1-UP; PEZ1-UP
Type 2
CANNOT BE USED WITH RIPPER OR WINCH
AN ATTACHMENT
S/N LAE1-UP; PEZ1-UP
Type 2
CANNOT BE USED WITH RIPPER OR WINCH
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1H-4106 | [1] | PIN AS-DRAWBAR | |
| 2. | 7G-6623 | [1] | HITCH | |
| 3. | 8E-9289 | [1] | LATCH | |
| 4. | 226-7269 | [1] | BAR | |
| 5. | 465-7896 CY | [1] | BAR GP-STRIKER (REAR) | |
| 6. | 256-6024 | [2] | BAR | |
| 7. | 299-3423 C | [10] | NUT (1-8-THD) | |
| 8. | 8T-4778 CM | [1] | LOCKNUT (M16X2-THD) | |
| 9. | 9M-5854 C | [10] | STUD-TAPERLOCK (1-8-THD) | |
| 10. | 299-3426 C | [10] | WASHER-HARD (28X49X6-MM THK) | |
| 12. | 7X-2555 CM | [1] | BOLT (M16X2X80-MM) | |
| 13. | 7X-2585 M | [6] | BOLT (M30X3.5X160-MM) | |
| 14. | 9X-8258 | [6] | WASHER (33X56X6-MM THK) | |
| 15. | 149-5933 E | SEAL (42.3-CM EACH) | ||
| 16. | 238-9166 E | SEAL (100-CM) | ||
| 17. | 7X-1456 | [16] | PLUG | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200504
223-0659: TRACK ADJUSTER & RECOIL GP
223-0659 TRACK ADJUSTER & RECOIL GP
S/N LAE1-330; PEZ1-UP
PART OF 223-0652, 223-0656, 261-0996, 261-0997, 261-3077, 261-3079, 261-3080, 261-3082, 283-8671, 283-8672, 357-3540, 357-3541, 357-3556, 357-3557 FRAME GP-TELESCOPING RECOIL, 278-6367, 278-6368 UNDERCARRIAGE AR
ALSO AN ATTACHMENT
S/N LAE1-330; PEZ1-UP
PART OF 223-0652, 223-0656, 261-0996, 261-0997, 261-3077, 261-3079, 261-3080, 261-3082, 283-8671, 283-8672, 357-3540, 357-3541, 357-3556, 357-3557 FRAME GP-TELESCOPING RECOIL, 278-6367, 278-6368 UNDERCARRIAGE AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-5926 | [1] | VALVE-RELIEF | |
| 2. | 3T-0598 | [1] | TUBE | |
| 3. | 3W-0640 | [1] | PISTON | |
| 4. | 3W-2369 | [1] | PLATE AS | |
| 5. | 6Y-5799 | [2] | LOCK | |
| 6. | 314-7923 | [1] | CYLINDER | |
| 7. | 190-8609 | [1] | VALVE-FILL | |
| 8. | 214-9080 | [1] | PLATE AS | |
| 9. | 226-1340 | [1] | SPRING-RECOIL | |
| 10. | 167-2323 | [1] | SEAL-U-CUP | |
| 11. | 2J-6274 | [1] | SEAL-O-RING | |
| 12. | 2S-4078 | [1] | SEAL-O-RING | |
| 13. | 7X-2553 M | [4] | BOLT (M16X2X40-MM) | |
| 14. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 16. | 9S-8010 | [1] | PLUG | |
| 17. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
#SEBP45200505
315-7786: TRACK ADJUSTER & RECOIL GP
315-7786 TRACK ADJUSTER & RECOIL GP
S/N LAE331-UP
PART OF 334-0459, 334-0460 FRAME GP-TELESCOPING RECOIL, 278-6368 UNDERCARRIAGE AR
ALSO AN ATTACHMENT
S/N LAE331-UP
PART OF 334-0459, 334-0460 FRAME GP-TELESCOPING RECOIL, 278-6368 UNDERCARRIAGE AR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-5926 | [1] | VALVE-RELIEF (TRACK TENSION CYLINDER) | |
| 2. | 3T-0598 | [1] | TUBE | |
| 3. | 3W-0640 | [1] | PISTON | |
| 4. | 3W-2369 | [1] | PLATE AS | |
| 5. | 6Y-5799 | [2] | LOCK | |
| 6. | 314-7923 | [1] | CYLINDER | |
| 7. | 190-8609 | [1] | VALVE-FILL (RECOIL SPRING OIL) | |
| 8. | 314-2516 | [1] | PLATE AS | |
| 3W-0329 | [1] | PLATE | ||
| 9. | 314-2518 | [1] | SPRING | |
| 10. | 167-2323 | [1] | SEAL-U-CUP | |
| 11. | 2J-6274 | [1] | SEAL-O-RING | |
| 12. | 2S-4078 | [1] | SEAL-O-RING | |
| 13. | 7X-2553 M | [4] | BOLT (M16X2X40-MM) | |
| 14. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 15. | 8T-4182 M | [2] | BOLT (M10X1.5X45-MM) | |
| 16. | 9S-8010 | [1] | PLUG (CYLINDER HEAD) | |
| 17. | 9X-8257 | [4] | WASHER (17.5X30X3.5-MM THK) | |
| M | METRIC PART | |||
#SEBP45200506
234-9670: TRACK GP
234-9670 TRACK GP -2-REQUIRED, SYSTEMONE
S/N PEZ1-UP
560-MM (22-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, CLAMP MASTER
PART OF 222-8667 UNDERCARRIAGE AR
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS
S/N PEZ1-UP
560-MM (22-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, CLAMP MASTER
PART OF 222-8667 UNDERCARRIAGE AR
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 234-9672 Y | [1] | LINK AS-TRACK (SYSTEMONE) | ||
| 6Y-9024 M | [152] | BOLT-TRACK (M22X1.5X67-MM) | ||
| 254-0224 M | [4] | BOLT-TRACK MASTER (M22X1.5X108-MM) | ||
| 318-1064 | [2] | LINK-TRACK MASTER (CLAMP) | ||
| 9W-4381 M | [152] | NUT-TRACK (M22X1.5-THD) | ||
| 234-9704 | [38] | SHOE-TRACK | ||
| 254-4472 | [1] | SHOE-TRACK MASTER | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200507
234-9671: TRACK GP
234-9671 TRACK GP -2-REQUIRED, SYSTEMONE
S/N PEZ1-UP
610-MM (24-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, CLAMP MASTER
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS
AN ATTACHMENT
S/N PEZ1-UP
610-MM (24-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, CLAMP MASTER
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 234-9672 Y | [1] | LINK AS-TRACK (SYSTEMONE) | ||
| 6Y-9024 M | [152] | BOLT-TRACK (M22X1.5X67-MM) | ||
| 254-0224 M | [4] | BOLT-TRACK MASTER (M22X1.5X108-MM) | ||
| 318-1064 | [2] | LINK-TRACK MASTER (CLAMP) | ||
| 9W-4381 M | [152] | NUT-TRACK (M22X1.5-THD) | ||
| 234-9705 | [38] | SHOE-TRACK | ||
| 254-4470 | [1] | SHOE-TRACK MASTER | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200508
234-9675: TRACK GP
234-9675 TRACK GP -2-REQUIRED, SYSTEMONE
S/N LAE1-UP
560-MM (22-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, CLAMP MASTER
PART OF 218-4982 UNDERCARRIAGE AR
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS
S/N LAE1-UP
560-MM (22-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, CLAMP MASTER
PART OF 218-4982 UNDERCARRIAGE AR
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 351-0958 Y | [1] | LINK AS-TRACK | ||
| 6Y-9024 M | [160] | BOLT-TRACK (M22X1.5X67-MM) | ||
| 254-0224 M | [4] | BOLT-TRACK MASTER (M22X1.5X108-MM) | ||
| 318-1064 | [2] | LINK-TRACK MASTER (CLAMP) | ||
| 9W-4381 M | [160] | NUT-TRACK (M22X1.5-THD) | ||
| 234-9704 | [40] | SHOE-TRACK | ||
| 254-4472 | [1] | SHOE-TRACK MASTER | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP45200509
234-9676: TRACK GP
234-9676 TRACK GP -2-REQUIRED, SYSTEMONE
S/N LAE1-UP
610-MM (24-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, CLAMP MASTER
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS
AN ATTACHMENT
S/N LAE1-UP
610-MM (24-IN) GROUSER SHOE. SEALED, LUBRICATED, MODERATE SERVICE, CLAMP MASTER
FOR USE WITH SYSTEMONE ROLLERS, GUARDS, GUIDESTRIPS
AN ATTACHMENT
For full view, you need register
Parts for your D6T TRACK-TYPE TRACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 351-0958 Y | [1] | LINK AS-TRACK | ||
| 6Y-9024 M | [160] | BOLT-TRACK (M22X1.5X67-MM) | ||
| 254-0224 M | [4] | BOLT-TRACK MASTER (M22X1.5X108-MM) | ||
| 318-1064 | [2] | LINK-TRACK MASTER (CLAMP) | ||
| 9W-4381 M | [160] | NUT-TRACK (M22X1.5-THD) | ||
| 234-9705 | [40] | SHOE-TRACK | ||
| 254-4470 | [1] | SHOE-TRACK MASTER | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
