AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

336-7738 ROLLER GP-TRACK -STAR S/N 5321-UP CANNOT BE USED WITH @@@@@336-7737@@@@@ AN ATTACHMENT 532 TRACK FELLER BUNCHER


UNDERCARRIAGE
ROLLER GP
TRACK ADJUSTER & RECOIL GP
UNDERCARRIAGE GP

TRACK FELLER BUNCHER 532 TRACK FELLER BUNCHER 532
 532 Track Feller Buncher 53200001-UP (MACHINE) POWERED BY C-9 Engine SEBP4587 532 532   (2005)

UNDERCARRIAGE

ROLLER GP
ROLLER GP-TRACK
228-6405 ROLLER GP-TRACK
228-6405 ROLLER GP-TRACK
336-7738 ROLLER GP-TRACK
ROLLER GP-TRACK-DOUBLE FLANGE
183-2879 ROLLER GP-TRACK-DOUBLE FLANGE
ROLLER GP-TRACK-SINGLE FLANGE
183-2874 ROLLER GP-TRACK-SINGLE FLANGE
336-7737 ROLLER GP-TRACK-SINGLE FLANGE
 

#SEBP45870310
 

336-7738: ROLLER GP-TRACK

336-7738 ROLLER GP-TRACK -STAR
S/N 5321-UP
CANNOT BE USED WITH @@@@@336-7737@@@@@
AN ATTACHMENT
i03489154 SEBP4587
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  228-6405 Y [4] ROLLER GP-TRACK (SINGLE FLANGE)  
   
  8T-0668 M [16] BOLT (M24X3X110-MM)  
  6V-8237 [16] WASHER (26X44X4-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870311
 

183-2879: ROLLER GP-TRACK-DOUBLE FLANGE

183-2879 ROLLER GP-TRACK-DOUBLE FLANGE
S/N 5321-UP
PART OF 224-9642 ROLLER GP-TRACK
i01348115 SEBP4587
1832879 ROLLER GP-TRACK-DOUBLE FLANGE Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8F-8882 [2] SEAL-O-RING  
2. 9W-2146 [1] PLUG  
3. 148-3533 [2] SEAL GP-DUO-CONE  
4. 179-1497 [2] COLLAR-TRACK ROLLER  
5. 179-1499 [2] DOWEL  
6. 183-2880 [1] ROLLER & BEARING AS  
6A. 6Y-2792 [2] BEARING  
7. 183-2883 [1] SHAFT-TRACK ROLLER  
 

#SEBP45870312
 

183-2874: ROLLER GP-TRACK-SINGLE FLANGE

183-2874 ROLLER GP-TRACK-SINGLE FLANGE
S/N 5321-UP
PART OF 228-6405 ROLLER GP-TRACK, 336-7737 ROLLER GP-TRACK-SINGLE FLANGE
AN ATTACHMENT
i01348101 SEBP4587
1832874 ROLLER GP-TRACK-SINGLE FLANGE Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-2875 [1] ROLLER & BEARING AS  
1A. 6Y-2792 [2] BEARING  
2. 9W-2146 [1] PLUG  
3. 148-3533 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  160-6631 [2] RING-TORIC  
4. 179-1497 [2] COLLAR-TRACK ROLLER  
5. 179-1499 [2] DOWEL  
6. 183-2883 [1] SHAFT-TRACK ROLLER  
7. 8F-8882 [2] SEAL-O-RING  
 

#SEBP45870313
 

336-7737: ROLLER GP-TRACK-SINGLE FLANGE

336-7737 ROLLER GP-TRACK-SINGLE FLANGE -CARRIER
S/N 5321-UP
CANNOT BE USED WITH @@@@@336-7738@@@@@
AN ATTACHMENT
i06679472 SEBP4587
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  183-2874 Y [4] ROLLER GP-TRACK-SINGLE FLANGE  
    -OR-
  428-8691 Y [4] ROLLER GP-TRACK-SINGLE FLANGE  
  8T-0668 M [16] BOLT (M24X3X110-MM)  
  6V-8237 [16] WASHER (26X44X4-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45870314
 

428-8691: ROLLER GP-TRACK-SINGLE FLANGE

428-8691 ROLLER GP-TRACK-SINGLE FLANGE
S/N 5321-UP
PART OF 228-6405 ROLLER GP-TRACK, 336-7737 ROLLER GP-TRACK-SINGLE FLANGE
AN ATTACHMENT
i06251170 SEBP4587
4288691 ROLLER GP-TRACK-SINGLE FLANGE Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 183-2875 [1] ROLLER & BEARING AS  
2. 9W-2146 [1] PLUG  
3. 320-8919 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  160-6631 [2] RING-TORIC  
4. 8F-8882 [2] SEAL-O-RING  
5. 179-1499 [2] DOWEL  
   
    PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
 

#SEBP45870315
 

499-3440: ROLLER GP-TRACK-SINGLE FLANGE

499-3440 ROLLER GP-TRACK-SINGLE FLANGE -STAR
S/N 5321-UP
PART OF 228-6405 ROLLER GP-TRACK
AN ATTACHMENT
i07214801 SEBP4587
4993440 ROLLER GP-TRACK-SINGLE FLANGE Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 492-5507 [1] ROLLER GP-TRACK-SINGLE FLANGE  
1A. 8F-8882 [2] SEAL-O-RING  
1B. 9W-2146 [1] PLUG  
1C. 179-1499 [2] DOWEL  
1D. 320-8919 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  160-6631 [2] RING-TORIC  
1E. 6Y-2792 [2] BEARING  
 

#SEBP45870316
 

499-3441: ROLLER GP-TRACK-SINGLE FLANGE

499-3441 ROLLER GP-TRACK-SINGLE FLANGE -STAR
S/N 5321-UP
PART OF 228-6405 ROLLER GP-TRACK
AN ATTACHMENT
i07214805 SEBP4587
4993441 ROLLER GP-TRACK-SINGLE FLANGE Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] ROLLER GP-TRACK-SINGLE FLANGE  
1A. 8F-8882 [2] SEAL-O-RING  
1B. 9W-2146 [1] PLUG  
1C. 179-1499 [2] DOWEL  
1D. 320-8919 [2] SEAL GP-DUO-CONE  
    (EACH INCLUDES)
  160-6631 [2] RING-TORIC  
1E. 6Y-2792 [2] BEARING  
 

#SEBP45870317
 

152-8562: SPRING GP-RECOIL

152-8562 SPRING GP-RECOIL
S/N 5321-UP
PART OF 152-8561 IDLER GP
i01175430 SEBP4587
1528562 SPRING GP-RECOIL Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-6402 [1] SUPPORT AS  
2. 115-6400 [1] SPRING  
3. 7Y-1872 [1] ROD  
4. 7Y-1459 [1] WASHER (66X115X9-MM THK)  
5. 7Y-1460 M [1] NUT (M64X6-THD)  
6. 101-2620 [1] SUPPORT  
7. 7Y-1221 [1] STRIP  
8. 8T-9080 M [2] BOLT-SOCKET HEAD (M12X1.75X20-MM)  
  M   METRIC PART
 

#SEBP45870318
 

219-1357: TILT GP-CAB LEVELING

219-1357 TILT GP-CAB LEVELING
S/N 5321-179
PART OF 219-4784 UNDERCARRIAGE AR
Type 1
i01857897 SEBP4587
2191357 TILT GP-CAB LEVELING Parts scheme 2191357 TILT GP-CAB LEVELING Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-0122 [4] FITTING-GREASE  
2. 7Y-3553 [2] BUSHING  
3. 218-9992 [1] CABLE AS  
4. 219-1343 [1] STRAP (CAB LEVELING, RUBBER)  
5. 219-1344 [1] PLATE  
6. 219-1345 [1] PLATE  
7. 219-1349 [1] PLATE AS  
8. 219-1350 [1] PLATE AS  
9. 219-1351 [1] PLATE  
10. 219-1352 [2] PLATE  
11. 219-1353 [1] SHEET AS-RUBBER  
12. 269-5314 [1] PIN AS  
14. 219-1356 [2] PLATE  
15. 219-1358 [1] PLATE  
16. 219-1359 [1] PLATE  
17. 219-1360 [1] PIN AS  
18. 219-1364 [1] FRAME AS  
19. 219-1365 [1] PLATE  
20. 219-1366 [1] PLATE  
21. 219-1367 [1] PLATE AS  
22. 219-1370 B [1] SHIM  
23. 219-1371 [1] PLATE  
24. 219-1376 [1] PLATE  
25. 219-1377 [2] PLATE  
26. 219-1378 [2] PIN  
27. 219-1379 [2] PLATE  
28. 219-1380 [2] PLATE  
29. 219-1381 [2] PLATE  
30. 219-1382 [2] PIN  
31. 219-1383 [4] PLATE  
32. 120-8678 [4] WASHER (25.5X85X12-MM THK)  
33. 219-1385 [1] PLATE AS  
  8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
  8T-6380 M [8] BOLT (M24X3X130-MM)  
34. 219-2447 [1] PIN AS  
35. 219-2458 [4] BUSHING  
36. 220-1324 [1] FRAME AS  
  9X-6618 M [8] BOLT (M30X3.5X130-MM)  
  9X-8399 [8] WASHER (33X56X6-MM THK)  
  220-1323 [4] CAP-TRUNNION  
37. 9U-9560 [1] BEARING  
38. 160-8749 M [1] BOLT (M12X1.75X60-MM)  
39. 2H-4145 [4] SEAL-O-RING  
40. 6V-8149 M [1] NUT (M12X1.75-THD)  
41. 7H-2444 [2] SEAL-O-RING  
42. 7X-2555 M [2] BOLT (M16X2X80-MM)  
43. 7X-4803 [6] SEAL-LIP TYPE  
44. 7Y-2396 [2] BUSHING  
45. 9X-8913 M [2] BOLT (M24X3X300-MM)  
46. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
48. 8T-4139 M [18] BOLT (M12X1.75X30-MM)  
49. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
50. 8T-4193 M [8] BOLT (M16X2X50-MM)  
51. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
52. 8T-5042 M [3] BOLT (M20X2.5X50-MM)  
53. 8T-5065 M [3] LOCKNUT (M30X3.5-THD)  
54. 8T-5379 M [8] BOLT (M24X3X50-MM)  
55. 9F-2247 [4] PLUG-PIPE  
56. 9M-5024 [1] SEAL-O-RING  
57. 9X-8244 M [2] LOCKNUT (M16X2-THD)  
58. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
59. 9X-8258 [2] WASHER (33X56X6-MM THK)  
60. 107-3157 [1] WASHER (22X76.2X6-MM THK)  
61. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
62. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP45870319
 

219-1357: TILT GP-CAB LEVELING

219-1357 TILT GP-CAB LEVELING
S/N 5321-179
PART OF 219-4784 UNDERCARRIAGE AR
Type 2
i03472361 SEBP4587
2191357 TILT GP-CAB LEVELING Parts scheme 2191357 TILT GP-CAB LEVELING Parts scheme
  For full view, you need register

Parts for your 532 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-0122 [4] FITTING-GREASE  
2. 7Y-3553 [2] BUSHING  
3. 218-9992 [1] CABLE AS  
4. 219-1343 [1] STRAP (CAB LEVELING, RUBBER)  
5. 219-1344 [1] PLATE  
6. 219-1345 [1] PLATE  
7. 219-1349 [1] PLATE AS  
8. 219-1350 [1] PLATE AS  
9. 219-1351 [1] PLATE  
10. 219-1352 [2] PLATE  
11. 219-1353 [1] SHEET AS-RUBBER  
12. 340-2473 C [1] PIN AS  
13. 8T-4123 [1] WASHER (22X35X3.5-MM THK)  
14. 219-1356 [2] PLATE  
15. 219-1358 [1] PLATE  
16. 219-1359 [1] PLATE  
17. 219-1360 [1] PIN AS  
18. 219-1364 [1] FRAME AS  
19. 219-1365 [1] PLATE  
20. 219-1366 [1] PLATE  
21. 219-1367 [1] PLATE AS  
22. 219-1370 B [1] SHIM  
23. 219-1371 [1] PLATE  
24. 219-1376 [1] PLATE  
25. 219-1377 [2] PLATE  
26. 219-1378 [2] PIN  
27. 219-1379 [2] PLATE  
28. 219-1380 [2] PLATE  
29. 219-1381 [2] PLATE  
30. 219-1382 [2] PIN  
31. 219-1383 [4] PLATE  
32. 120-8678 [4] WASHER (25.5X85X12-MM THK)  
33. 219-1385 [1] PLATE AS  
  8T-4167 [8] WASHER-HARD (26X44X4-MM THK)  
  8T-6380 M [8] BOLT (M24X3X130-MM)  
34. 219-2447 [1] PIN AS  
35. 219-2458 [4] BUSHING  
36. 220-1324 [1] FRAME AS  
  9X-6618 M [8] BOLT (M30X3.5X130-MM)  
  9X-8399 [8] WASHER (33X56X6-MM THK)  
  220-1323 [4] CAP-TRUNNION  
37. 9U-9560 [1] BEARING  
38. 160-8749 M [1] BOLT (M12X1.75X60-MM)  
39. 2H-4145 [4] SEAL-O-RING  
40. 6V-8149 M [1] NUT (M12X1.75-THD)  
41. 7H-2444 [2] SEAL-O-RING  
42. 7X-2555 M [2] BOLT (M16X2X80-MM)  
43. 7X-4803 [6] SEAL-LIP TYPE  
44. 7Y-2396 [2] BUSHING  
45. 9X-8913 M [2] BOLT (M24X3X300-MM)  
46. 8T-4121 [3] WASHER-HARD (11X21X2.5-MM THK)  
47. 8T-4136 M [3] BOLT (M10X1.5X25-MM)  
48. 8T-4139 M [18] BOLT (M12X1.75X30-MM)  
49. 8T-4167 [4] WASHER-HARD (26X44X4-MM THK)  
50. 8T-4193 M [8] BOLT (M16X2X50-MM)  
51. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
52. 8T-5042 M [3] BOLT (M20X2.5X50-MM)  
53. 8T-5065 M [3] LOCKNUT (M30X3.5-THD)  
54. 8T-5379 M [8] BOLT (M24X3X50-MM)  
55. 9F-2247 [4] PLUG-PIPE  
56. 9M-5024 [1] SEAL-O-RING  
57. 9X-8244 M [2] LOCKNUT (M16X2-THD)  
58. 9X-8257 [8] WASHER (17.5X30X3.5-MM THK)  
59. 9X-8258 [2] WASHER (33X56X6-MM THK)  
60. 107-3157 [1] WASHER (22X76.2X6-MM THK)  
61. 8T-4780 M [1] BOLT (M20X2.5X30-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

Information:

Service Letter-NACD
Product Improvement Program for Inspecting Track Rollers for Proper Installation and Torque on Certain 511, 521, 522, 532, 541, 551, 552, and 1190T Track Feller Bunchers
Product Improvement Program for Inspecting Track Rollers for Proper Installation and Torque on Certain 511, 521, 522, 532, 541, 551, 552, and 1190T Track Feller Bunchers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Track Roller (Double Flange)
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Service Letter-China
Product Improvement Program for Inspecting Track Rollers for Proper Installation and Torque on Certain 511, 521, 522, 532, 541, 551, 552, and 1190T Track Feller Bunchers
Product Improvement Program for Inspecting Track Rollers for Proper Installation and Torque on Certain 511, 521, 522, 532, 541, 551, 552, and 1190T Track Feller Bunchers
Service Letter-Asia
Undercarriage Reconditioning Bulletin
Guideline for Roller and Idler Component Reuse {4159, 4180}
Guideline for Roller and Idler Component Reuse {4159, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Track, Track Roller, and Track Idler Cycle Times {4159, 4169, 4170, 4171, 4180}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Roller Servicing Equipment, Tooling, Literature, and Training Review {0374, 4154, 4180, 4181, 7561}
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
Hydraulic Excavator Roller Disassembly and Assembly Procedures {0729, 0768, 4154, 4180, 4181}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Roller Service Evaluation Checklist {4154, 4180, 4181, 7561}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Track Roller Oil Fill Volume {0645, 4180, 7500, 7579}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Reconditioning Procedure for Seal Ramps on Inverted Style Idler and Roller Shafts {0729, 4150, 4154, 4159, 6433, 7561}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Conventional (Dry) Welding Procedure for Rollers and Idlers {0679, 4150, 4159, 4180, 7950}
Carrier Roller Oil Fill Volume {4154}
Carrier Roller Oil Fill Volume {4154}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Reconditioning Dimensions for Track Rollers {4154, 4180}
Carrier Roller Disassembly and Assembly Procedures {4154}
Carrier Roller Disassembly and Assembly Procedures {4154}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Reconditioning Dimensions for Carrier Rollers {4154, 4180}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Procedure for Water-Cooled Welding of Track Rollers {0679, 4180, 7950}
Nitrogen Pressure Test Unit <NOBR>FT2724</NOBR> {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Nitrogen Pressure Test Unit FT2724 {4150, 4159, 4169, 4170, 4171, 4174, 4175, 4180}
Service Letter-APD
Product Improvement Program for Inspecting Track Rollers for Proper Installation and Torque on Certain 511, 521, 522, 532, 541, 551, 552, and 1190T Track Feller Bunchers
Product Improvement Program for Inspecting Track Rollers for Proper Installation and Torque on Certain 511, 521, 522, 532, 541, 551, 552, and 1190T Track Feller Bunchers
Disassembly and Assembly
Track Roller - Remove
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Track Roller - Install
511, 521, 522 and 532 Track Feller Bunchers Machine Systems
Service Magazine
Bolts for Track Rollers Should Be Inspected {4180}
2006/12/04
Improved Track Roller Groups Are Now Used on Certain Forest Machine and Track Feller Buncher {4180}
2015/08/31

Caterpillar Parts SIS Catalog 532 :

228-6405 ROLLER GP-TRACK
ROLLER GP-TRACK
228-6405 ROLLER GP-TRACK
ROLLER GP-TRACK
228-6405 ROLLER GP-TRACK
224-9642 ROLLER GP-TRACK
213-1975 LINK AS-TRACK
IDLER GP-FRONT
102-8152 IDLER GP-FRONT
IDLER GP
152-8561 IDLER GP
IDLER GP
152-8561 IDLER GP
ROLLER GP-TRACK-DOUBLE FLANGE
183-2879 ROLLER GP-TRACK-DOUBLE FLANGE
ROLLER GP-TRACK-SINGLE FLANGE
183-2874 ROLLER GP-TRACK-SINGLE FLANGE
336-7737 ROLLER GP-TRACK-SINGLE FLANGE
ROLLER GP-TRACK-SINGLE FLANGE
428-8691 ROLLER GP-TRACK-SINGLE FLANGE
ROLLER GP-TRACK-SINGLE FLANGE
499-3440 ROLLER GP-TRACK-SINGLE FLANGE
ROLLER GP-TRACK-SINGLE FLANGE
499-3441 ROLLER GP-TRACK-SINGLE FLANGE
SPRING GP-RECOIL
152-8562 SPRING GP-RECOIL
TILT GP-CAB LEVELING
219-1357 TILT GP-CAB LEVELING

Truck sale:

CATERPILLAR 532 2008
$119,500 USD 
CATERPILLAR 532 2008
- FORESTRY - FELLER BUNCHERS
PETERSON MACHINERY CO.
CATERPILLAR 532 2010
 
CATERPILLAR 532 2010
- FOREST MACHINE
N C MACHINERY
- Billings - United States
2010 CAT 532
USD $239,500 
2010 CAT 532

PETERSON CAT
Portland, Oregon
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.