AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

255-3472 CYLINDER & LINES GP-TILT -CAB LEVELING S/N 5521-UP PART OF 240-2754 UNDERCARRIAGE AR Type 2 552


HYDRAULIC SYSTEM
CYLINDER GP

TRACK FELLER BUNCHER 552 TRACK FELLER BUNCHER 552
 552 Track Feller Buncher 55200001-UP (MACHINE) POWERED BY C-9 Engine SEBP4590 552 552   (2005)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & LINES GP-TILT
255-3472 CYLINDER & LINES GP-TILT
CYLINDER & LINES GP-TILT
255-3472 CYLINDER & LINES GP-TILT
CYLINDER & MTG GP-BOOM
282-3014 CYLINDER & MTG GP-BOOM
CYLINDER & MTG GP-BOOM
282-3014 CYLINDER & MTG GP-BOOM
CYLINDER & MTG GP-BOOM
284-8587 CYLINDER & MTG GP-BOOM
 

#SEBP45900320
 

255-3472: CYLINDER & LINES GP-TILT

255-3472 CYLINDER & LINES GP-TILT -CAB LEVELING
S/N 5521-UP
PART OF 240-2754 UNDERCARRIAGE AR
Type 2
i02443740 SEBP4590
2553472 CYLINDER & LINES GP-TILT Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
2. 7K-1181 [1] STRAP-CABLE  
3. 171-6727 [1] ADAPTER AS  
  4J-5477 [1] SEAL-O-RING  
  8T-4128 [1] ADAPTER  
4. 202-4025 I [2] HOSE AS  
5. 226-5076 [3] BODY-VALVE  
6. 226-7302 I [1] HOSE AS  
7. 233-2381 I [2] HOSE AS  
8. 233-2383 I [2] HOSE AS  
9. 239-3541 I [2] HOSE AS  
10. 282-9613 CY [2] CYLINDER GP-TILT (SIDE, FOR CAB LEVELING)  
11. 282-9614 CY [1] CYLINDER GP-TILT (REAR, FOR CAB LEVELING)  
12. 255-2278 [6] VALVE AS  
  244-0984 [1] KIT-SEAL  
    (INCLUDES O-RINGS & BACK-UP RINGS)
13. 148-8354 [4] ELBOW AS  
    (EACH INCLUDES)
  6V-9002 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
14. 148-8364 [8] ELBOW AS  
    (EACH INCLUDES)
  6V-8625 [1] ELBOW  
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [1] SEAL-O-RING  
15. 148-8428 [2] TEE AS  
    (EACH INCLUDES)
  3K-0360 [1] SEAL-O-RING  
  6V-8398 [2] SEAL-O-RING  
  6V-8782 [1] TEE  
16. 8T-4198 M [18] BOLT (M10X1.5X100-MM)  
17. 4J-5267 [6] SEAL-O-RING  
18. 4J-5477 [1] SEAL-O-RING  
19. 8C-6865 [1] CONNECTOR  
20. 8M-2773 [1] CLIP (LOOP)  
21. 8T-4121 [18] WASHER-HARD (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900321
 

282-3014: CYLINDER & MTG GP-BOOM

282-3014 CYLINDER & MTG GP-BOOM
S/N 5521-UP
PART OF 284-5620 LINKAGE AR-FELLING HEAD
Type 1
AN ATTACHMENT
i02438630 SEBP4590
2823014 CYLINDER & MTG GP-BOOM Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-7396 M [8] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
2. 215-9097 Y [1] CYLINDER GP-HYDRAULIC (BOOM)  
3. 218-2978 [2] MANIFOLD  
4. 220-8661 [1] PLATE  
5. 228-4925 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
6. 228-4926 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 233-2356 I [1] HOSE AS  
8. 148-8327 [2] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  6V-8637 [1] CONNECTOR  
  6V-9746 [1] SEAL-O-RING  
9. 148-8376 [1] ELBOW AS  
  6V-8983 [1] ELBOW  
  6V-9746 [2] SEAL-O-RING  
10. 1P-3702 [2] SEAL-RECTANGULAR  
11. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
12. 5P-7468 [1] CLIP (SLOT)  
13. 5P-7469 [1] CLIP (TAB)  
14. 6V-1874 [1] GROMMET (31-MM ID)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
17. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
18. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900322
 

282-3014: CYLINDER & MTG GP-BOOM

282-3014 CYLINDER & MTG GP-BOOM
S/N 5521-UP
PART OF 284-5620 LINKAGE AR-FELLING HEAD
Type 2
AN ATTACHMENT
i02991670 SEBP4590
2823014 CYLINDER & MTG GP-BOOM Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 178-5922 C [2] ELBOW  
2. 215-9097 Y [1] CYLINDER GP-HYDRAULIC (BOOM)  
3. 220-8661 [1] PLATE  
4. 228-4925 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
5. 228-4926 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
6. 233-2356 I [1] HOSE AS  
7. 148-8376 [1] ELBOW AS  
  6V-8983 [1] ELBOW  
  6V-9746 [2] SEAL-O-RING  
8. 1P-3703 C [2] SEAL-RECTANGULAR  
9. 2P-1293 [1] LOCKNUT (1-3/16-12-THD)  
10. 5P-7468 [1] CLIP (SLOT)  
11. 5P-7469 [1] CLIP (TAB)  
12. 6V-1874 [1] GROMMET (31-MM ID)  
13. 6V-9746 C [2] SEAL-O-RING  
14. 8T-4121 C [12] WASHER-HARD (11X21X2.5-MM THK)  
15. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
16. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
17. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
18. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 8T-6466 CM [8] BOLT (M10X1.5X60-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900323
 

284-8587: CYLINDER & MTG GP-BOOM

284-8587 CYLINDER & MTG GP-BOOM
S/N 5521-UP
PART OF 235-4046, 261-4613, 310-4802 CYLINDER AR-HYDRAULIC, 284-5614, 284-5619 HYDRAULIC AR
Type 1
AN ATTACHMENT
i02486755 SEBP4590
2848587 CYLINDER & MTG GP-BOOM Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-7396 M [16] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
2. 218-2978 [4] MANIFOLD  
3. 228-4925 [2] SUPPORT AS  
4. 228-4926 [2] SUPPORT AS  
5. 235-8235 Y [2] CYLINDER GP-BOOM  
6. 246-4330 [2] TUBE AS  
7. 246-4479 [2] BLOCK  
8. 148-8317 [4] CONNECTOR AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  5K-9090 [1] SEAL-O-RING  
  6V-8714 [1] CONNECTOR  
9. 1P-3702 [4] SEAL-RECTANGULAR  
10. 5K-9090 [2] SEAL-O-RING  
11. 5P-7468 [2] CLIP (SLOT)  
12. 5P-7469 [2] CLIP (TAB)  
13. 5P-8444 [2] GROMMET (37-MM ID)  
14. 8C-7534 [2] CLIP  
15. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
17. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
18. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
19. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900324
 

284-8587: CYLINDER & MTG GP-BOOM

284-8587 CYLINDER & MTG GP-BOOM
S/N 5521-UP
PART OF 235-4046, 261-4613, 310-4802 CYLINDER AR-HYDRAULIC, 284-5614, 284-5619 HYDRAULIC AR
Type 2
AN ATTACHMENT
i03091022 SEBP4590
2848587 CYLINDER & MTG GP-BOOM Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 101-7398 CM [16] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
2. 151-8865 C [4] ELBOW  
3. 228-4925 [2] SUPPORT AS  
4. 228-4926 [2] SUPPORT AS  
5. 235-8235 Y [2] CYLINDER GP-BOOM  
6. 246-4330 [2] TUBE AS  
7. 246-4479 [2] BLOCK  
9. 4J-5267 C [4] SEAL-O-RING  
10. 5K-9090 C [6] SEAL-O-RING  
11. 5P-7468 [2] CLIP (SLOT)  
12. 5P-7469 [2] CLIP (TAB)  
13. 5P-8444 [2] GROMMET (37-MM ID)  
14. 8C-7534 [2] CLIP  
15. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 M [2] BOLT (M12X1.75X30-MM)  
17. 8T-4184 M [4] BOLT (M12X1.75X45-MM)  
18. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
19. 8T-4223 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900325
 

272-3072: CYLINDER & MTG GP-HYDRAULIC

272-3072 CYLINDER & MTG GP-HYDRAULIC
S/N 5521-UP
PART OF 272-3071 LINKAGE AR-FELLING HEAD
Type 1
AN ATTACHMENT
i02322230 SEBP4590
2723072 CYLINDER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6721 [4] ELBOW  
2. 234-5857 Y [2] CYLINDER GP-HYDRAULIC (BOOM)  
3. 241-3514 [2] SUPPORT AS  
4. 246-4330 [2] TUBE AS  
5. 246-4479 [2] BLOCK  
6. 246-9805 [2] SUPPORT AS  
8. 8T-4648 M [16] BOLT (M12X1.75X70-MM)  
9. 5K-9090 [6] SEAL-O-RING  
10. 5P-7468 [2] CLIP (SLOT)  
11. 5P-7469 [2] CLIP (TAB)  
12. 5P-8444 [2] GROMMET (37-MM ID)  
13. 1P-3704 [4] SEAL-RECTANGULAR  
14. 8C-7534 [2] CLIP  
15. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 M [6] BOLT (M12X1.75X30-MM)  
17. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
18. 8T-4223 [22] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900326
 

272-3072: CYLINDER & MTG GP-HYDRAULIC

272-3072 CYLINDER & MTG GP-HYDRAULIC
S/N 5521-UP
PART OF 272-3071 LINKAGE AR-FELLING HEAD
Type 2
AN ATTACHMENT
i05938583 SEBP4590
2723072 CYLINDER & MTG GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-6721 [4] ELBOW  
2. 234-5857 Y [2] CYLINDER GP-HYDRAULIC (BOOM)  
3. 241-3514 [2] SUPPORT AS  
4. 246-4330 [2] TUBE AS  
5. 426-0253 C [2] BRACKET  
6. 119-2379 [2] SUPPORT AS  
8. 8T-4648 M [16] BOLT (M12X1.75X70-MM)  
9. 5K-9090 [6] SEAL-O-RING  
10. 5P-7468 [2] CLIP (SLOT)  
11. 5P-7469 [2] CLIP (TAB)  
12. 5P-8444 [2] GROMMET (37-MM ID)  
13. 1P-3704 [4] SEAL-RECTANGULAR  
14. 323-0049 C [2] CLIP  
15. 8T-4121 C [10] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 CM [2] BOLT (M12X1.75X30-MM)  
17. 8T-4196 M [8] BOLT (M10X1.5X35-MM)  
18. 8T-4223 C [20] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 8T-4137 CM [2] BOLT (M10X1.5X20-MM)  
20. 8T-4183 CM [2] BOLT (M12X1.75X40-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900327
 

310-4803: CYLINDER & MTG GP-STICK

310-4803 CYLINDER & MTG GP-STICK
S/N 5521-146
PART OF 310-4802 CYLINDER AR-HYDRAULIC
AN ATTACHMENT
i02838125 SEBP4590
3104803 CYLINDER & MTG GP-STICK Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2324 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 158-9059 Y [1] CYLINDER GP-STICK  
3. 170-6271 [2] BLOCK  
4. 241-3512 I [1] HOSE AS  
5. 241-3513 [1] PLATE  
6. 281-0212 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 108-3819 M [8] BOLT-SOCKET HEAD (M12X1.75X70-MM)  
8. 148-8335 [2] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
9. 164-5577 [1] ELBOW AS  
  5K-9090 [2] SEAL-O-RING  
  6V-8984 [1] ELBOW  
10. 5P-7468 [1] CLIP (SLOT)  
11. 5P-7469 [1] CLIP (TAB)  
12. 5P-8444 [1] GROMMET (37-MM ID)  
13. 6V-3240 [2] SEAL-RECTANGULAR  
14. 6V-9172 [1] NUT (1-7/16-12-THD)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
17. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
18. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900328
 

310-4803: CYLINDER & MTG GP-STICK

310-4803 CYLINDER & MTG GP-STICK
S/N 552147-UP
PART OF 310-4802 CYLINDER AR-HYDRAULIC
Type 1
AN ATTACHMENT
i02916322 SEBP4590
3104803 CYLINDER & MTG GP-STICK Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2324 [1] SUPPORT AS  
  119-2325 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
2. 289-7868 CY [1] CYLINDER GP-HYDRAULIC  
3. 170-6271 [2] BLOCK  
4. 241-3512 I [1] HOSE AS  
5. 241-3513 [1] PLATE  
6. 281-0212 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 108-3819 M [8] BOLT-SOCKET HEAD (M12X1.75X70-MM)  
8. 148-8335 [2] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR (SEAL)  
  7M-8485 [1] SEAL-O-RING  
9. 164-5577 [1] ELBOW AS  
  5K-9090 [2] SEAL-O-RING  
  6V-8984 [1] ELBOW (90-DEG)  
10. 5P-7468 [1] CLIP (SLOT)  
11. 5P-7469 [1] CLIP (TAB)  
12. 5P-8444 [1] GROMMET (37-MM ID)  
13. 6V-3240 [2] SEAL-RECTANGULAR  
14. 6V-9172 [1] NUT (1-7/16-12-THD)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
17. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
18. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
19. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP45900329
 

310-4803: CYLINDER & MTG GP-STICK

310-4803 CYLINDER & MTG GP-STICK
S/N 552147-UP
PART OF 310-4802 CYLINDER AR-HYDRAULIC
Type 2
AN ATTACHMENT
i03010763 SEBP4590
3104803 CYLINDER & MTG GP-STICK Parts scheme
  For full view, you need register

Parts for your 552 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-2324 [1] SUPPORT AS  
2. 289-7868 Y [1] CYLINDER GP-HYDRAULIC  
3. 6I-6721 C [2] ELBOW  
4. 241-3512 I [1] HOSE AS  
5. 241-3513 [1] PLATE  
6. 281-0212 [1] SUPPORT AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 8T-4648 CM [8] BOLT (M12X1.75X70-MM)  
9. 164-5577 [1] ELBOW AS  
  5K-9090 [2] SEAL-O-RING  
  6V-8984 [1] ELBOW  
10. 5P-7468 [1] CLIP (SLOT)  
11. 5P-7469 [1] CLIP (TAB)  
12. 5P-8444 [1] GROMMET (37-MM ID)  
13. 1P-3704 C [2] SEAL-RECTANGULAR  
14. 6V-9172 [1] NUT (1-7/16-12-THD)  
15. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4139 M [1] BOLT (M12X1.75X30-MM)  
17. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
18. 8T-4196 M [4] BOLT (M10X1.5X35-MM)  
19. 8T-4223 C [10] WASHER-HARD (13.5X25.5X3-MM THK)  
20. 5K-9090 C [2] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Tilt Cylinder Bearings - Lubricate
541, 551 and 552 Track Feller Bunchers
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Boom Cylinder
541, 551 and 552 Track Feller Bunchers Machine Systems
Stick Cylinder
541, 551 and 552 Track Feller Bunchers Machine Systems
Hood Tilt Cylinder
541, 551 and 552 Track Feller Bunchers Machine Systems
Tilt Cylinder (Saw) - Felling Head
541, 551 and 552 Track Feller Bunchers Machine Systems
Tilt Cylinder (Side for Cab Leveling)
541, 551 and 552 Track Feller Bunchers Machine Systems
Tilt Cylinder (Rear for Cab Leveling)
541, 551 and 552 Track Feller Bunchers Machine Systems
Tool Operating Manual
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Testing and Adjusting
Tilt Cylinder Drift - Check
541 Track Feller Buncher, 551
Track Feller Buncher and 552
Track Feller Buncher Machine Systems
Stick Cylinder Drift - Check
541 Track Feller Buncher, 551
Track Feller Buncher and 552
Track Feller Buncher Machine Systems
Boom Cylinder Drift - Check
541 Track Feller Buncher, 551
Track Feller Buncher and 552
Track Feller Buncher Machine Systems
Relief Valve (Line) - Test and Adjust
541 Track Feller Buncher, 551
Track Feller Buncher and 552
Track Feller Buncher Machine Systems
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Tilt Cylinder (Side for Cab Leveling) - Remove and Install
541, 551 and 552
Track Feller Bunchers Machine Systems
Tilt Cylinder (Saw) - Remove and Install
541, 551 and 552
Track Feller Bunchers Machine Systems
Stick Cylinder - Remove and Install
541, 551 and 552
Track Feller Bunchers Machine Systems
Boom Cylinder - Remove and Install
541, 551 and 552
Track Feller Bunchers Machine Systems
Service Magazine
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}

Caterpillar Parts SIS Catalog 552 :

CYLINDER & LINES GP-TILT
255-3472 CYLINDER & LINES GP-TILT
COVER GP-VALVE END
171-2446 COVER GP-VALVE END
COVER GP-PUMP
177-2521 COVER GP-PUMP
COUPLING & MTG GP-PUMP
154-6643 COUPLING & MTG GP-PUMP
BYPASS GP-FILTER
3G-7232 BYPASS GP-FILTER
BARREL GP-MOTOR
245-3662 BARREL GP-MOTOR
241-1870 UNDERCARRIAGE AR
240-2754 UNDERCARRIAGE AR
CYLINDER & MTG GP-BOOM
282-3014 CYLINDER & MTG GP-BOOM
CYLINDER & MTG GP-BOOM
282-3014 CYLINDER & MTG GP-BOOM
CYLINDER & MTG GP-BOOM
284-8587 CYLINDER & MTG GP-BOOM
CYLINDER & MTG GP-BOOM
284-8587 CYLINDER & MTG GP-BOOM
CYLINDER & MTG GP-HYDRAULIC
272-3072 CYLINDER & MTG GP-HYDRAULIC
CYLINDER & MTG GP-HYDRAULIC
272-3072 CYLINDER & MTG GP-HYDRAULIC
CYLINDER & MTG GP-STICK
310-4803 CYLINDER & MTG GP-STICK
CYLINDER & MTG GP-STICK
310-4803 CYLINDER & MTG GP-STICK

Truck sale:

CATERPILLAR 5522 2014
 
CATERPILLAR 5522 2014
- FORESTRY - FELLER BUNCHERS - TRACK
GOUGH CAT
16 Branston Street - Christchurch -
CATERPILLAR 5522 2016
 
CATERPILLAR 5522 2016
- FORESTRY - FELLER BUNCHERS - TRACK
GOUGH CAT
16 Branston Street - Christchurch -
CATERPILLAR 5522 2016
 
CATERPILLAR 5522 2016
- FORESTRY - FELLER BUNCHERS - TRACK
PETERSON MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.