AVSPARE.COM
parts catalog

928Hz 930H Wheel Loader BYD00001-UP (MACHINE) POWERED BY C6.6 Engine WORK TOOLS Caterpillar SIS




Parts group 928HZ:

  For full view, you need register
WORK TOOLS

Information:

(For parts list, see above)

Operation and Maintenance Manual
Rated Load
924H, 924HZ, 928HZ and 930H Wheel Loaders
Service Magazine
Operation and Maintenance Manual
Rated Load
924H, 924HZ, 928HZ and 930H Wheel Loaders
Bucket Lower Pivot Bearings - Lubricate
924H, 924HZ, 928HZ and 930H Wheel Loaders
Cutting Edges - Inspect/Replace
Snow Push Work Tool Supplement
Special Instruction
Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket - Remove
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Bucket - Install
924H, 924Hz, 928Hz and 930H Wheel Loaders Machine Systems
Service Magazine
Operation and Maintenance Manual
Quick Coupler - Check - If Equipped
924H, 924HZ, 928HZ and 930H Wheel Loaders
Special Instruction
Installation of the 332-8885 Third Valve Jumper Lines Gp {5057, 6129}
Installation of the 332-8885 Third Valve Jumper Lines Gp {5057, 6129}
Installation of the 315-6301 Coupler Lines Gp {1408, 5057, 5264, 5479, 6129, 7332}
Installation of the 315-6301 Coupler Lines Gp {1408, 5057, 5264, 5479, 6129, 7332}
Systems Operation
Quick Coupler Control
928Hz Wheel Loader Hydraulic System
Service Magazine
Operation and Maintenance Manual
Rated Load
924H, 924HZ, 928HZ and 930H Wheel Loaders
Service Magazine
Operation and Maintenance Manual
Bucket Tips - Inspect/Replace
924H, 924HZ, 928HZ and 930H Wheel Loaders
Bucket Cutting Edges - Inspect/Replace
924H, 924HZ, 928HZ and 930H Wheel Loaders
Bucket Wear Plates - Inspect/Replace
924H, 924HZ, 928HZ and 930H Wheel Loaders
Cutting Edges - Inspect/Replace
Snow Push Work Tool Supplement
Special Instruction
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Instructions for Welding the &quot;K Series&quot; Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
Operation and Maintenance Manual
Cutting Edges - Inspect/Replace
Snow Push Work Tool Supplement
Operating Technique Information
Snow Push Work Tool Supplement
Cutting Edges - Inspect/Replace
Snow Push Work Tool Supplement
Plate Locations and Film Locations
Snow Push Work Tool Supplement
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Operation and Maintenance Manual
Guards - Operator Protection
924H, 924HZ, 928HZ and 930H Wheel Loaders
Operating Technique Information
Snow Push Work Tool Supplement
Plate Locations and Film Locations
Snow Push Work Tool Supplement

Truck sale:

 
Caterpillar 928HZ
- Wheel Loaders
CGT - COMPAGNIA GENERALE TRATTORI
 
 
Caterpillar 928HZ
- Wheel Loaders
SIME DARBY INDUSTRIAL SDN BHD
 
Caterpillar 928HZ
- Wheel Loaders
MICHIGAN CAT
59,000 
Caterpillar 928HZ, Wheel Loaders, Construction
- Wheel Loaders
RING POWER CORP.
95,697 
Caterpillar 928HZ, Wheel Loaders, Construction
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.