ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP46730320
311-0017: WIRING GP-CHASSIS
311-0017 WIRING GP-CHASSIS -VARIABLE PITCH FAN
S/N JKM1-1365
PART OF 311-0013 CONTROL AR-FAN
AN ATTACHMENT
S/N JKM1-1365
PART OF 311-0013 CONTROL AR-FAN
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 B | [16] | STRAP-CABLE | |
| 2. | 319-9349 | [1] | HARNESS AS-CHASSIS (VARIABLE PITCH FAN) | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (60-CM) | |||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 3. | 335-2609 Y | [1] | RELAY GP | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46730321
311-0017: WIRING GP-CHASSIS
311-0017 WIRING GP-CHASSIS -VARIABLE PITCH FAN
S/N JKM1366-UP
PART OF 311-0013 CONTROL AR-FAN
AN ATTACHMENT
S/N JKM1366-UP
PART OF 311-0013 CONTROL AR-FAN
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 335-2609 Y | [1] | RELAY GP | |
| 2. | 362-3341 C | [1] | HARNESS AS-CHASSIS | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (60-CM) | |||
| 9X-3402 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 3. | 132-5789 | [1] | CLIP (LADDER) | |
| 4. | 3S-2093 | [3] | STRAP-CABLE | |
| 5. | 7K-1181 BC | [6] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46730322
267-4800: WIRING GP-COMMUNICATION
267-4800 WIRING GP-COMMUNICATION
S/N JKM1-UP
PART OF 330-5954 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
S/N JKM1-UP
PART OF 330-5954 INSTALLATION AR-COMMUNICATION
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [4] | STRAP-CABLE | |
| 2. | 305-4377 | [1] | HARNESS AS-SENSOR | |
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [6] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 3. | 342-8428 Y | [1] | WIRING GP-CAB | |
| 4. | 130-5300 | [1] | CLIP | |
| 5. | 132-5789 | [2] | CLIP (LADDER) | |
| 6. | 2M-3432 | [1] | GROMMET | |
| 7. | 4P-7581 | [1] | CLIP (LADDER) | |
| 8. | 5P-9297 | [1] | CLIP (LOOP) | |
| 9. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46730323
281-9476: WIRING GP-COMMUNICATION
281-9476 WIRING GP-COMMUNICATION -PRODUCT LINK 300
S/N JKM1-UP
PART OF 266-8583 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT
S/N JKM1-UP
PART OF 266-8583 INSTALLATION AR-COMMUNICATION
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [17] | STRAP-CABLE | |
| 2. | 209-7530 | [1] | SPACER (14X25X40-MM THK) | |
| 3. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 4. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 5. | 230-1340 | [1] | FILM-WARNING (PRODUCT LINK RADIO, U.S.) | |
| 6. | 262-1421 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | |
| 7. | 263-9088 Y | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 8. | 266-9958 | [1] | PLATE | |
| 9. | 280-7287 | [1] | BRACKET AS | |
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 10. | 281-9480 | [1] | HARNESS AS-MONITOR | |
| 11. | 132-5789 | [1] | CLIP (LADDER) | |
| 12. | 2D-2751 | [1] | GROMMET | |
| 13. | 319-6804 | [1] | ANTENNA AS | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 14. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 15. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 16. | 7X-2533 M | [4] | BOLT (M6X1X35-MM) | |
| 17. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 19. | 8T-6868 M | [1] | BOLT (M12X1.75X80-MM) | |
| 20. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 21. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46730324
281-9476: WIRING GP-COMMUNICATION
281-9476 WIRING GP-COMMUNICATION -PRODUCT LINK 300
S/N JKM1-UP
PART OF 266-8583 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT
S/N JKM1-UP
PART OF 266-8583 INSTALLATION AR-COMMUNICATION
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [17] | STRAP-CABLE | |
| 2. | 209-7530 | [1] | SPACER (14X25X40-MM THK) | |
| 3. | 8C-5607 | [8] | MOUNT-ISOLATION | |
| 4. | 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | |
| 6. | 262-1421 Y | [1] | ELECTRONICS GP-COMMUNICATION (PRODUCT LINK 300) | |
| 7. | 336-3545 CY | [1] | RADIO GP-COMMUNICATION (PRODUCT LINK 121SR) | |
| 8. | 266-9958 | [1] | PLATE | |
| 9. | 280-7287 | [1] | BRACKET AS | |
| 6V-9632 M | [6] | NUT-WELD (M6X1-THD) | ||
| 10. | 281-9480 | [1] | HARNESS AS-MONITOR | |
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [64] | PLUG-SEAL | ||
| 190-7615 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [22] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-6772 | [2] | STRAP-CABLE | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
| 11. | 132-5789 | [1] | CLIP (LADDER) | |
| 12. | 2D-2751 | [1] | GROMMET | |
| 13. | 319-6804 | [1] | ANTENNA AS | |
| 301-0589 | [1] | ANTENNA (FLEXIBLE) | ||
| 355-0598 | [1] | NUT-SPECIAL | ||
| 14. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 15. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 16. | 7X-2533 M | [4] | BOLT (M6X1X35-MM) | |
| 17. | 8T-4138 M | [4] | BOLT (M6X1X20-MM) | |
| 18. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 19. | 8T-6868 M | [1] | BOLT (M12X1.75X80-MM) | |
| 20. | 9X-6165 | [4] | WASHER (6.5X22X2.5-MM THK) | |
| 21. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP46730325
263-5073: WIRING GP-ENGINE
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [33] | STRAP-CABLE | |
| 2. | 124-3019 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 305-3684 | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | |
| 4. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 5. | 260-2024 | [1] | BRACKET AS | |
| 6. | 300-6443 | [1] | HARNESS AS-ENGINE | |
| 7T-0094 | [6] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 9G-4344 | TERMINAL-RING (4-GA, 1/2-IN SCREW) | |||
| 152-5542 | [1] | TERMINAL AS (6-GA TO 8-GA) | ||
| 7N-9017 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 3T-4688 | [1] | TERMINAL-RING (4-GA, 7/16-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM) | |||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(10-CM) | |||
| 8T-8827 | [1] | BOOT (RED) | ||
| 135-2543 | [1] | BOOT (RED) | ||
| 9X-3401 | [214] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [15] | PLUG-SEAL | ||
| 7G-7919 | [1] | PLUG-SEAL | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 126-1766 | [23] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 204-6195 | [1] | SOCKET-CONNECTOR (10-GA) | ||
| 7. | 305-4378 | [1] | BRACKET AS | |
| 8. | 307-3100 | [1] | BRACKET AS | |
| 9. | 307-3101 | [1] | BRACKET | |
| 10. | 326-6550 | [1] | BRACKET AS | |
| 11. | 101-9759 | [1] | SPACER (9X20X39.2-MM THK) | |
| 12. | 130-5300 | [3] | CLIP | |
| 13. | 132-5789 | [4] | CLIP (LADDER) | |
| 14. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 15. | 1S-0994 | [3] | CLIP (LOOP) | |
| 16. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| 17. | 260-5864 | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 112-4550 E | SLEEVE (21-CM) | |||
| 18. | 3E-4352 | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 19. | 3S-2093 | [2] | STRAP-CABLE | |
| 20. | 4K-8864 | [1] | CLIP (LOOP) | |
| 21. | 4P-7429 | [1] | CLIP (LADDER) | |
| 22. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 23. | 5P-9085 | [1] | CLIP (LOOP) | |
| 24. | 6D-4246 | [5] | CLIP (LOOP) | |
| 25. | 7X-2552 M | [2] | BOLT (M16X2X30-MM) | |
| 26. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 27. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 29. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 30. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 31. | 8T-4179 M | [1] | BOLT (M12X1.75X20-MM) | |
| 32. | 8T-4189 M | [2] | BOLT (M8X1.25X20-MM) | |
| 33. | 8T-4192 M | [1] | BOLT (M12X1.75X25-MM) | |
| 34. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 35. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 8T-7329 M | [1] | BOLT (M8X1.25X55-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP46730326
263-5073: WIRING GP-ENGINE
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [29] | STRAP-CABLE | |
| 2. | 124-3019 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 3. | 218-4935 | [1] | SUPPRESSOR-ARC | |
| 4. | 260-2024 | [1] | BRACKET AS | |
| 5. | 305-3684 | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | |
| 6. | 305-4378 | [1] | BRACKET AS | |
| 7. | 362-3342 C | [1] | BRACKET AS | |
| 8. | 364-3661 C | [1] | BRACKET AS | |
| 9. | 364-5132 C | [1] | HARNESS AS-ENGINE | |
| 8T-8827 | [1] | BOOT (RED) | ||
| 135-2543 | [1] | BOOT (RED) | ||
| 274-3774 | [3] | CAP-CONNECTOR | ||
| 274-3775 | [2] | CAP-CONNECTOR | ||
| 245-1045 | [1] | COVER | ||
| 245-1044 | [2] | LOCK-CONNECTOR | ||
| 9X-3401 | [21] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [6] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 245-1042 | [1] | PLUG AS-CONNECTOR (64-PIN) | ||
| 267-7207 M | [1] | BOLT-SPECIAL (M6X1-THD) | ||
| 267-7208 | [1] | RING-RETAINING | ||
| 274-4990 | [1] | SEAL | ||
| 273-6315 | [1] | PLUG AS (9-PIN) | ||
| 225-3854 | [1] | PLUG AS-CONNECTOR (31-PIN) | ||
| 245-1048 | [35] | PLUG-CONNECTOR (1-PIN) | ||
| 8T-8737 | [15] | PLUG-SEAL | ||
| 7G-7919 | [1] | PLUG-SEAL | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 274-3780 | [1] | CAP-SEAL | ||
| 7T-0094 | [6] | SOCKET-CONNECTOR (12-GA TO 14-GA) | ||
| 9X-3402 | [23] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 204-6195 | [1] | SOCKET-CONNECTOR (10-GA) | ||
| 267-9572 | [29] | SOCKET-CONNECTION (18-GA) | ||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 110-8769 | [1] | WIRE AS (16-GA) | ||
| 9G-4343 | [1] | TERMINAL-RING (4-GA, 1/4-IN SCREW) | ||
| 9G-4344 | [1] | TERMINAL-RING (4-GA, 1/2-IN SCREW) | ||
| 152-5542 | [1] | TERMINAL AS (6-GA TO 8-GA) | ||
| 9X-9882 | [1] | TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(4-CM) | |||
| 7N-9017 | [1] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 3T-4688 | [1] | TERMINAL-RING (4-GA, 7/16-IN SCREW) | ||
| 308-6811 | [1] | TERMINAL AS-RING | ||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(4-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 210-8958 E | TUBE-HEAT SHRINK (24-MM DIA)(10-CM) | |||
| 10. | 101-9759 | [1] | SPACER (9X20X39.2-MM THK) | |
| 11. | 130-5300 | [3] | CLIP | |
| 12. | 132-5789 | [4] | CLIP (LADDER) | |
| 13. | 133-3260 | [1] | SPACER (11X19X10-MM THK) | |
| 14. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 15. | 1S-0994 | [3] | CLIP (LOOP) | |
| 16. | 204-8000 | [1] | MOUNTING-CABLE TIE | |
| 17. | 245-8842 C | [1] | CLIP | |
| 18. | 260-5864 | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.9-M) | |||
| 112-4550 E | SLEEVE (21-CM) | |||
| 19. | 3E-4352 | [1] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 20. | 3S-2093 C | [4] | STRAP-CABLE | |
| 21. | 4K-8864 | [1] | CLIP (LOOP) | |
| 22. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 23. | 5P-9085 | [1] | CLIP (LOOP) | |
| 24. | 6D-4246 C | [3] | CLIP (LOOP) | |
| 25. | 7X-0818 CM | [1] | BOLT (M8X1.25X45-MM) | |
| 26. | 7X-2552 M | [2] | BOLT (M16X2X30-MM) | |
| 27. | 7X-7729 C | [3] | WASHER (11X25X3-MM THK) | |
| 28. | 8E-9571 C | [1] | WASHER-HARD (8.8X16X7-MM THK) | |
| 29. | 8T-4121 C | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 30. | 8T-4122 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 31. | 8T-4136 CM | [6] | BOLT (M10X1.5X25-MM) | |
| 32. | 8T-4137 CM | [5] | BOLT (M10X1.5X20-MM) | |
| 33. | 8T-4189 CM | [1] | BOLT (M8X1.25X20-MM) | |
| 34. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 35. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 8T-7329 M | [1] | BOLT (M8X1.25X55-MM) | |
| 37. | 9M-8406 C | [1] | CLIP (LOOP) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP46730327
292-8508: WIRING GP-ENGINE
292-8508 WIRING GP-ENGINE
S/N C6E1-UP; G9G1-UP
PART OF 242-1382, 367-6735, 435-1668 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
S/N C6E1-UP; G9G1-UP
PART OF 242-1382, 367-6735, 435-1668 ENGINE AR-PRIMARY
ALSO AN ATTACHMENT
For full view, you need register
#SEBP46730328
263-5072: WIRING GP-FRONT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4V-1939 | [2] | CLAMP | |
| 2. | 107-4749 | [1] | PLATE | |
| 3. | 7K-1181 | [20] | STRAP-CABLE | |
| 4. | 172-4871 | [1] | BRACKET AS | |
| 5. | 300-6440 | [1] | HARNESS AS-FRONT | |
| 6. | 305-4370 | [1] | BRACKET AS | |
| 7. | 067-2551 | [1] | CLIP | |
| 8. | 124-9633 | [3] | CLIP (SLOT) | |
| 9. | 130-5300 | [7] | CLIP | |
| 10. | 132-5789 | [2] | CLIP (LADDER)(LADDER) | |
| 11. | 1S-0994 | [2] | CLIP (LOOP) | |
| 12. | 4D-7794 | [6] | CLIP | |
| 13. | 4K-8864 | [4] | CLIP (LOOP) | |
| 14. | 8K-2665 | [4] | CLAMP-HALF | |
| 15. | 8T-4121 | [23] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4137 M | [22] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 19. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 20. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 21. | 9X-2480 M | [2] | BOLT (M6X1X45-MM) | |
| 22. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 23. | 205-7299 | [4] | CLIP | |
| 24. | 4P-7581 | [1] | CLIP (LADDER) | |
| M | METRIC PART | |||
#SEBP46730329
263-5072: WIRING GP-FRONT
For full view, you need register
Parts for your 938H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4195 CM | [1] | BOLT (M10X1.5X30-MM) | |
| 3. | 7K-1181 C | [22] | STRAP-CABLE | |
| 4. | 172-4871 | [1] | BRACKET AS | |
| 6V-6716 | [2] | RIVET-TRUSS HEAD | ||
| 109-1645 | [1] | CLIP | ||
| 5. | 300-6440 | [1] | HARNESS AS-FRONT | |
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [4] | KIT-RECEPTACLE (3-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 5P-1442 E | HOSE (72-CM) | |||
| 5P-1506 E | HOSE (61-CM) | |||
| 8T-8737 | [39] | PLUG-SEAL | ||
| 9X-3401 | [25] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 110-6848 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 110-6844 | [1] | SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (240-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (20-CM) | |||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(30-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(20-CM) | |||
| 125-7876 E | TUBE-HEAT SHRINK (17.78-MM DIA)(10-CM) | |||
| 9X-3402 | [43] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 126-1768 | [4] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 1P-0810 B | TAPE-ELECTRICAL | |||
| 274-3774 | [2] | CAP-CONNECTOR | ||
| 6. | 305-4370 | [1] | BRACKET AS | |
| 7. | 067-2551 | [1] | CLIP | |
| 8. | 124-9633 | [1] | CLIP (SLOT) | |
| 9. | 130-5300 | [7] | CLIP | |
| 10. | 132-5789 C | [6] | CLIP (LADDER)(LADDER) | |
| 11. | 1S-0994 | [2] | CLIP (LOOP) | |
| 12. | 4D-7794 | [6] | CLIP | |
| 13. | 4K-8864 C | [3] | CLIP (LOOP) | |
| 14. | 8K-2665 | [4] | CLAMP-HALF | |
| 15. | 8T-4121 | [23] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4137 CM | [20] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4139 M | [2] | BOLT (M12X1.75X30-MM) | |
| 18. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 19. | 8T-4192 M | [4] | BOLT (M12X1.75X25-MM) | |
| 20. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 9M-8406 C | [4] | CLIP (LOOP) | |
| 24. | 4P-7581 | [1] | CLIP (LADDER) | |
| 25. | 091-0081 C | [1] | SPACER (10.5X20X10-MM THK) | |
| 26. | 4S-1936 C | [1] | CLIP | |
| 27. | 8T-4136 CM | [1] | BOLT (M10X1.5X25-MM) | |
| 28. | 7X-7729 | [1] | WASHER (11X25X3-MM THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Special Instruction
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Caterpillar Parts SIS Catalog 938H :
Truck sale:
94,734