396-1854 LINES GP-BOOM CYLINDER -BOOM LOWERING CONTROL S/N CJN1-UP PART OF 396-8721 VALVE AR-CHECK & RELIEF Type 2 AN ATTACHMENT 315D L

Pos.	Part No	Qty	Parts name
1.	096-5766	[2]	CLAMP
2.	196-3369 I	[1]	HOSE AS
3.	199-1861	[1]	TUBE AS
4.	199-1862	[1]	TUBE AS
5.	210-2768	[1]	FITTING
6.	296-7057 I	[1]	HOSE AS
7.	351-4998 I	[1]	HOSE AS
8.	434-8214 CY	[1]	SENSOR GP-PRESSURE (BOOM CYLINDER)
9.	369-8354 Y	[1]	VALVE GP-PILOT (BOOM, LH)
10.	369-8355 Y	[1]	VALVE GP-PILOT (BOOM, RH)
11.	392-3940	[1]	TUBE AS
12.	392-3941	[1]	TUBE AS
13.	392-3942	[1]	SUPPORT AS
14.	392-3943	[2]	SUPPORT AS
15.	392-3946	[1]	SUPPORT AS
16.	148-8336	[3]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8636	[1]	CONNECTOR
17.	148-8341	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8713	[1]	CONNECTOR
	7J-9108	[1]	SEAL-O-RING
18.	148-8371	[2]	ELBOW AS
			(EACH INCLUDES)
	6V-8397	[1]	SEAL-O-RING
	8C-8988	[1]	ELBOW
19.	148-8378	[3]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-8397	[1]	SEAL-O-RING
	6V-8724	[1]	ELBOW
20.	148-8433	[2]	TEE AS
			(EACH INCLUDES)
	6V-8397	[2]	SEAL-O-RING
	6V-9836	[1]	TEE-SWIVEL
21.	164-5567	[2]	COUPLER AS-QUICK DISCONNECT (MALE)
			(EACH INCLUDES)
	6V-3965	[1]	FITTING (QUICK DISCONNECT)
	214-7568	[1]	SEAL-O-RING
22.	1P-3703	[4]	SEAL-RECTANGULAR
23.	280-2747 M	[8]	BOLT-SOCKET HEAD (M10X1.5X60-MM)
24.	3J-1907	[1]	SEAL-O-RING
25.	6V-0852	[2]	CAP-DUST
26.	7J-9108	[4]	SEAL-O-RING
27.	7K-1181	[5]	STRAP-CABLE
28.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
29.	8T-4185 M	[10]	BOLT (M10X1.5X50-MM)
30.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP48610721

131-9878: LINES GP-BUCKET CYLINDER

131-9878 LINES GP-BUCKET CYLINDER
S/N CJN1-UP
PART OF 259-0844, 289-8111, 310-1782 CYLINDER & LINES GP-BUCKET
AN ATTACHMENT

i01435780 SEBP4861

1319878 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	131-9938	[1]	TUBE AS
2.	1P-3703	[1]	SEAL-RECTANGULAR
3.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
4.	131-9939	[1]	SUPPORT AS
5.	093-1292	[1]	CLAMP
6.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
7.	8T-4910 M	[1]	BOLT (M12X1.75X60-MM)
8.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
9.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
10.	131-9940	[1]	SUPPORT AS
	M		METRIC PART

#SEBP48610722

131-9879: LINES GP-BUCKET CYLINDER

131-9879 LINES GP-BUCKET CYLINDER
S/N CJN1-UP
PART OF 259-0914, 289-8119, 310-1781, 326-4413, 326-4416 CYLINDER & LINES GP-BUCKET
Type 1
AN ATTACHMENT

i01471719 SEBP4861

1319879 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	131-9938	[1]	TUBE AS
2.	1P-3703	[1]	SEAL-RECTANGULAR
3.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
4.	131-9942	[1]	SUPPORT AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	093-1292	[1]	CLAMP
6.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
7.	8T-4910 M	[1]	BOLT (M12X1.75X60-MM)
8.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
9.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
10.	132-0002	[1]	SUPPORT AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	M		METRIC PART

#SEBP48610723

131-9879: LINES GP-BUCKET CYLINDER

131-9879 LINES GP-BUCKET CYLINDER
S/N CJN1-UP
PART OF 310-1781 CYLINDER & LINES GP-BUCKET
Type 2
AN ATTACHMENT

i05288021 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	131-9938	[1]	TUBE AS
2.	1P-3703	[1]	SEAL-RECTANGULAR
3.	8T-4185 M	[4]	BOLT (M10X1.5X50-MM)
4.	422-9963 C	[1]	SUPPORT AS
	132-0002		SUPPORT AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	385-2967 C	[1]	CLAMP
6.	132-0002	[1]	SUPPORT AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
7.	085-8091 CM	[1]	BOLT (M10X1.5X55-MM)
8.	8T-4196 M	[2]	BOLT (M10X1.5X35-MM)
9.	8T-4121 C	[3]	WASHER-HARD (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART

#SEBP48610724

385-2916: LINES GP-BUCKET CYLINDER

385-2916 LINES GP-BUCKET CYLINDER
S/N CJN1-UP
PART OF 381-8971 CYLINDER & LINES GP-BUCKET
Type 1
AN ATTACHMENT

i04888136 SEBP4861

3852916 LINES GP-BUCKET CYLINDER Parts scheme

For full view, you need register

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	8T-0271 M	[4]	BOLT-SOCKET HEAD (M10X1.5X35-MM)
2.	6V-0357	[1]	SEAL-O-RING
3.	390-4173	[1]	TUBE AS
4.	8T-4133 M	[2]	NUT (M10X1.5-THD)
5.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
6.	7X-0796	[3]	LOCKWASHER (10.2X18.4X2.5-MM THK)
7.	390-4172	[1]	SUPPORT AS
8.	385-2967	[2]	CLAMP
9.	6V-4249 M	[1]	BOLT (M10X1.5X50-MM)
	M		METRIC PART

#SEBP48610725

385-2916: LINES GP-BUCKET CYLINDER

385-2916 LINES GP-BUCKET CYLINDER
S/N CJN1-UP
PART OF 381-8971 CYLINDER & LINES GP-BUCKET
Type 2
AN ATTACHMENT

i05247372 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	8T-0271 M	[4]	BOLT-SOCKET HEAD (M10X1.5X35-MM)
2.	6V-0357	[1]	SEAL-O-RING
3.	390-4173	[1]	TUBE AS
4.	6V-4249 M	[1]	BOLT (M10X1.5X50-MM)
5.	6V-5842 M	[2]	BOLT (M10X1.5X40-MM)
6.	7X-0796	[3]	LOCKWASHER (10.2X18.4X2.5-MM THK)
7.	422-9136	[1]	SUPPORT AS
	424-8398	[2]	NUT-WELD (M10X1.5-THD)
8.	385-2967	[1]	CLAMP
	M		METRIC PART

#SEBP48610726

262-3236: LINES GP-COUPLER

262-3236 LINES GP-COUPLER -REACH BOOM
S/N CJN1-UP
PART OF 375-6665 LINES AR-QUICK COUPLER, 343-1084, 343-1086, 343-1089, 343-1090, 343-1092, 354-1097, 354-1098, 354-1099, 354-1100, 354-1101 OPTION AR-LINKAGE
AN ATTACHMENT

i02736212 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	5Q-4213	[2]	CLIP
2.	193-6606	[2]	PLATE
3.	230-0496	[1]	PLATE
4.	277-1194	[2]	SUPPORT AS
5.	277-1195	[1]	TUBE AS
6.	277-1198	[1]	TUBE AS
7.	277-1201	[1]	TUBE AS
8.	277-1204	[1]	TUBE AS
9.	135-3980	[6]	CLIP
10.	5Q-4212	[4]	CLIP
11.	6V-8398	[6]	SEAL-O-RING
12.	7X-2549 M	[6]	BOLT (M12X1.75X100-MM)
13.	8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
14.	8T-4223	[18]	WASHER-HARD (13.5X25.5X3-MM THK)
15.	352-6772	[2]	CLIP AS
16.	8T-4648 M	[4]	BOLT (M12X1.75X70-MM)
	M		METRIC PART

#SEBP48610727

262-3239: LINES GP-COUPLER

262-3239 LINES GP-COUPLER
S/N CJN1-UP
PART OF 379-7201, 379-7205, 396-6809, 396-6812 OPTION AR-HYDRAULIC, 343-1086, 343-1089, 354-1098, 354-1100 OPTION AR-LINKAGE, 379-7341, 379-7342 OPTION AR-REGIONAL
FOR USE WITH 3.1 TO 3.2-M (10.2 TO 10.5-FT) STICK
AN ATTACHMENT

i02765743 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	363-2569 I	[2]	HOSE AS
2.	198-0370	[2]	CLIP
3.	277-0921	[1]	TUBE AS
4.	277-0924	[1]	TUBE AS
5.	148-8415	[1]	REDUCER AS
	6V-8397	[1]	SEAL-O-RING
	6V-8936	[1]	REDUCER
6.	148-8419	[1]	REDUCER AS
	4J-5477	[1]	SEAL-O-RING
	6V-8935	[1]	REDUCER
7.	5Q-4212	[8]	CLIP
8.	6V-8398	[4]	SEAL-O-RING
9.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
11.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
12.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	9X-6582	[1]	NUT (13/16-16-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP48610728

262-3242: LINES GP-COUPLER

262-3242 LINES GP-COUPLER
S/N CJN1-UP
FOR USE WITH 2.6-M TO 2.7-M (8.5-FT TO 8.9-FT) STICK
AN ATTACHMENT

i02765818 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR:

Pos.	Part No	Qty	Parts name
1.	177-8407 I	[2]	HOSE AS
2.	198-0370	[2]	CLIP
3.	277-1059	[1]	TUBE AS
4.	277-1062	[1]	TUBE AS
5.	148-8415	[1]	REDUCER AS
	6V-8397	[1]	SEAL-O-RING
	6V-8936	[1]	REDUCER
6.	148-8419	[1]	REDUCER AS
	4J-5477	[1]	SEAL-O-RING
	6V-8935	[1]	REDUCER
7.	5Q-4212	[8]	CLIP
8.	6V-8398	[4]	SEAL-O-RING
9.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
10.	8T-4139 M	[8]	BOLT (M12X1.75X30-MM)
11.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
12.	8T-4223	[8]	WASHER-HARD (13.5X25.5X3-MM THK)
13.	9X-6582	[1]	NUT (13/16-16-THD)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP48610729

262-3245: LINES GP-COUPLER

262-3245 LINES GP-COUPLER
S/N CJN1-UP
FOR USE WITH 2.3-M (7.4-FT) STICK
AN ATTACHMENT

i02765847 SEBP4861

For full view, you need register

Parts for your 315D L EXCAVATOR: