HYDRAULIC SYSTEM
LINES GP-HYDRAULICHYDRAULIC GP
LINES GP-PILOT
LINES GP-STICK
OPERATOR STATION
CONTROL GP-HYDRAULICHYDRAULIC SYSTEM
LINES GP-AUXILIARYHYDRAULIC SYSTEM
LINES GP-HYDRAULIC
#SEBP48710640
260-7911: HOSE GP-HYDRAULIC
For full view, you need register
#SEBP48710641
260-7913: HOSE GP-HYDRAULIC
For full view, you need register
#SEBP48710642
270-5710: HYDRAULIC AR
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 259-5237 Y | [1] | FASTENER GP-WIRING HARNESS (HEAVY LIFT) | ||
| 239-1699 Y | [1] | LINES GP-BOOM CYLINDER | ||
| 239-1714 Y | [1] | LINES GP-FRONT | ||
| 248-9846 Y | [1] | LINES GP-HYDRAULIC OIL COOLER (CONTROL VALVE, PUMP) | ||
| 248-9848 Y | [1] | LINES GP-HYDRAULIC OIL COOLER (CLAMP, HOSE) | ||
| 248-9825 Y | [1] | LINES GP-PILOT (JOYSTICK, PEDALS) | ||
| 248-9850 Y | [1] | LINES GP-PILOT (MAIN CONTROL VALVE) | ||
| 248-9851 Y | [1] | LINES GP-PILOT (MAIN CONTROL VALVE) | ||
| 248-9852 Y | [1] | LINES GP-PILOT (FILTER, PILOT PUMP) | ||
| 255-1659 Y | [1] | LINES GP-PILOT (HEAVY LIFT) | ||
| 248-9847 Y | [1] | LINES GP-PUMP (SUPPLY, MAIN PUMP) | ||
| 239-1716 Y | [1] | LINES GP-TRAVEL MOTOR | ||
| 260-7868 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 279-7869 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 239-1710 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 259-7602 Y | [1] | VALVE GP-MAIN CONTROL (HEAVY LIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48710643
270-5711: HYDRAULIC AR
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 259-5237 Y | [1] | FASTENER GP-WIRING HARNESS (HEAVY LIFT) | ||
| 239-1699 Y | [1] | LINES GP-BOOM CYLINDER | ||
| 239-1714 Y | [1] | LINES GP-FRONT | ||
| 248-9846 Y | [1] | LINES GP-HYDRAULIC OIL COOLER (CONTROL VALVE, PUMP) | ||
| 248-9848 Y | [1] | LINES GP-HYDRAULIC OIL COOLER (CLAMP, HOSE) | ||
| 248-9825 Y | [1] | LINES GP-PILOT (JOYSTICK, PEDALS) | ||
| 248-9850 Y | [1] | LINES GP-PILOT (MAIN CONTROL VALVE) | ||
| 248-9851 Y | [1] | LINES GP-PILOT (MAIN CONTROL VALVE) | ||
| 248-9852 Y | [1] | LINES GP-PILOT (FILTER, PILOT PUMP) | ||
| 255-1659 Y | [1] | LINES GP-PILOT (HEAVY LIFT) | ||
| 248-9847 Y | [1] | LINES GP-PUMP (SUPPLY, MAIN PUMP) | ||
| 239-1717 Y | [1] | LINES GP-TRAVEL MOTOR (LONG UNDERCARRIAGE) | ||
| 260-7868 Y | [1] | MOUNTING GP-MAIN CONTROL VALVE | ||
| 279-7869 Y | [1] | PUMP & MTG GP-MAIN HYDRAULIC | ||
| 239-1710 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 259-7602 Y | [1] | VALVE GP-MAIN CONTROL (HEAVY LIFT) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48710644
351-9652: INSTALLATION AR-PILOT LINES
351-9652 INSTALLATION AR-PILOT LINES -ACCUMULATOR
S/N PHX1-UP
PART OF 354-1042, 354-1043 DISTRIBUTION AR
AN ATTACHMENT
S/N PHX1-UP
PART OF 354-1042, 354-1043 DISTRIBUTION AR
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 352-6860 Y | [1] | ACCUMULATOR GP-HYDRAULIC (CHARGED) | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48710645
343-8342: KIT-HYDRAULIC LINES
343-8342 KIT-HYDRAULIC LINES -QUICK COUPLER
S/N PHX1-UP
PART OF 345-3321 LINES GP-COUPLER
S/N PHX1-UP
PART OF 345-3321 LINES GP-COUPLER
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4I-9521 | [4] | BAND-MARKER (RED, L1) | |
| 2. | 4I-9522 | [4] | BAND-MARKER (YELLOW, L2) | |
| 3. | 4V-0611 | [8] | CLAMP | |
| 4. | 4V-0612 | [4] | PLATE | |
| 5. | 4V-0969 | [4] | PLATE AS | |
| 6. | 7K-1181 | [20] | STRAP-CABLE | |
| 7. | 196-9994 | [3] | UNION AS | |
| (EACH INCLUDES) | ||||
| 4J-5477 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8736 | [1] | UNION | ||
| 8. | 343-8343 I | [2] | HOSE AS | |
| 9. | 344-6276 I | [2] | HOSE AS | |
| 10. | 323-6157 | [2] | COUPLING AS-PERMANENT | |
| 11. | 164-5570 | [5] | UNION AS | |
| (EACH INCLUDES) | ||||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-8730 | [1] | UNION (FACE SEAL) | ||
| 12. | 1B-9575 | [4] | BOLT (5/16-18X1.56-IN) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP48710646
345-3322: KIT-HYDRAULIC LINES
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [25] | STRAP-CABLE | |
| 2. | 289-5726 I | [1] | HOSE AS | |
| 3. | 148-8367 | [1] | ELBOW AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-9850 | [1] | ELBOW | ||
| 4. | 148-8417 | [1] | REDUCER AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8941 | [1] | REDUCER | ||
| 5. | 148-8449 | [1] | TEE AS-SWIVEL | |
| 6V-9746 | [2] | SEAL-O-RING | ||
| 6V-9839 | [1] | TEE-SWIVEL | ||
| 6. | 6V-8556 | [1] | NUT (1-3/16-12-THD) | |
| 7. | 6V-9829 | [1] | CAP (ORFS) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
#SEBP48710647
234-6613: LEVER GP-CONTROL
234-6613 LEVER GP-CONTROL -HYDRAULIC LOCKOUT
S/N MCH1-UP; PHX1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
S/N MCH1-UP; PHX1-UP
PART OF 421-1434 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 4I-3038 | [2] | WASHER (3.3X8X0.5-MM THK) | |
| 3. | 111-4799 | [1] | SWITCH AS-LIMIT (HYDRAULIC LOCKOUT) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5P-5998 D | TUBE (0.3-M) | |||
| 4. | 185-8286 M | [2] | SCREW-MACHINE (M4X0.7X8-MM) | |
| 5. | 234-6615 | [1] | KNOB | |
| 6. | 087-4683 | [2] | LOCKWASHER | |
| 7. | 120-9027 M | [2] | SCREW-PAN HEAD (M3X0.5X16-MM) | |
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
#SEBP48710648
237-3184: LINES GP-AUXILIARY HYDRAULIC
237-3184 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N MCH1-UP; PHX1-UP
2.4-M TO 2.5-M (7.9-FT TO 8.2-FT) STICK
Type 1
AN ATTACHMENT
S/N MCH1-UP; PHX1-UP
2.4-M TO 2.5-M (7.9-FT TO 8.2-FT) STICK
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-6780 | [1] | TUBE AS | |
| 2. | 142-6582 | [1] | TUBE AS | |
| 3. | 173-7916 | [4] | CLAMP-HALF | |
| 4. | 253-6694 I | [1] | HOSE AS | |
| 5. | 253-6697 I | [1] | HOSE AS | |
| 6. | 277-0954 CY | [2] | VALVE GP-MANUAL | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [4] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 14. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP48710649
237-3184: LINES GP-AUXILIARY HYDRAULIC
237-3184 LINES GP-AUXILIARY HYDRAULIC -STICK, HIGH PRESSURE
S/N MCH1-UP; PHX1-UP
2.4-M TO 2.5-M (7.9-FT TO 8.2-FT) STICK
Type 2
AN ATTACHMENT
S/N MCH1-UP; PHX1-UP
2.4-M TO 2.5-M (7.9-FT TO 8.2-FT) STICK
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 320D EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-6780 | [1] | TUBE AS | |
| 2. | 142-6582 | [1] | TUBE AS | |
| 3. | 173-7916 | [4] | CLAMP-HALF | |
| 4. | 253-6694 I | [1] | HOSE AS | |
| 5. | 253-6697 I | [1] | HOSE AS | |
| 6. | 389-2407 CY | [2] | VALVE GP-MANUAL (AUXILIARY, SHUTOFF, 2-WAY FLOW) | |
| 7. | 1P-3703 | [3] | SEAL-RECTANGULAR | |
| 8. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 9. | 1P-5767 | [4] | FLANGE-HALF | |
| 10. | 6V-0400 | [4] | FLANGE-HALF | |
| 11. | 7Y-4538 | [4] | CLAMP-HALF | |
| 12. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 13. | 8T-4139 M | [12] | BOLT (M12X1.75X30-MM) | |
| 15. | 8T-4184 M | [8] | BOLT (M12X1.75X45-MM) | |
| 16. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4223 | [24] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 19. | 8T-6685 M | [4] | BOLT (M10X1.5X110-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
